* [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices
@ 2019-07-22 19:24 Vijay Khemka
2019-07-22 19:24 ` [PATCH] dt-bindings: hwmon: Add binding for pxe1610 Vijay Khemka
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Vijay Khemka @ 2019-07-22 19:24 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland,
Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree,
linux-kernel, linux-arm-kernel, linux-aspeed
Cc: openbmc @ lists . ozlabs . org, sdasari, vijaykhemka
Addes Voltage regulators Infineon pxe1610 devices to Facebook
tiogapass platform.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index c4521eda787c..b7783833a58c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -144,6 +144,42 @@
&i2c5 {
status = "okay";
// CPU Voltage regulators
+ vr@48 {
+ compatible = "infineon,pxe1610";
+ reg = <0x48>;
+ };
+ vr@4a {
+ compatible = "infineon,pxe1610";
+ reg = <0x4a>;
+ };
+ vr@50 {
+ compatible = "infineon,pxe1610";
+ reg = <0x50>;
+ };
+ vr@52 {
+ compatible = "infineon,pxe1610";
+ reg = <0x52>;
+ };
+ vr@58 {
+ compatible = "infineon,pxe1610";
+ reg = <0x58>;
+ };
+ vr@5a {
+ compatible = "infineon,pxe1610";
+ reg = <0x5a>;
+ };
+ vr@68 {
+ compatible = "infineon,pxe1610";
+ reg = <0x68>;
+ };
+ vr@70 {
+ compatible = "infineon,pxe1610";
+ reg = <0x70>;
+ };
+ vr@72 {
+ compatible = "infineon,pxe1610";
+ reg = <0x72>;
+ };
};
&i2c6 {
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH] dt-bindings: hwmon: Add binding for pxe1610 2019-07-22 19:24 [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Vijay Khemka @ 2019-07-22 19:24 ` Vijay Khemka 2019-07-22 20:06 ` Guenter Roeck 2019-07-22 19:24 ` [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card Vijay Khemka 2019-07-23 0:11 ` [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Andrew Jeffery 2 siblings, 1 reply; 11+ messages in thread From: Vijay Khemka @ 2019-07-22 19:24 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Cc: openbmc @ lists . ozlabs . org, sdasari, vijaykhemka Added new DT binding document for Infineon PXE1610 devices. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> --- .../devicetree/bindings/hwmon/pxe1610.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/pxe1610.txt diff --git a/Documentation/devicetree/bindings/hwmon/pxe1610.txt b/Documentation/devicetree/bindings/hwmon/pxe1610.txt new file mode 100644 index 000000000000..635daf4955db --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pxe1610.txt @@ -0,0 +1,15 @@ +pxe1610 properties + +Required properties: +- compatible: Must be one of the following: + - "infineon,pxe1610" for pxe1610 + - "infineon,pxe1110" for pxe1610 + - "infineon,pxm1310" for pxm1310 +- reg: I2C address + +Example: + +vr@48 { + compatible = "infineon,pxe1610"; + reg = <0x48>; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: hwmon: Add binding for pxe1610 2019-07-22 19:24 ` [PATCH] dt-bindings: hwmon: Add binding for pxe1610 Vijay Khemka @ 2019-07-22 20:06 ` Guenter Roeck 2019-07-23 0:12 ` Vijay Khemka 0 siblings, 1 reply; 11+ messages in thread From: Guenter Roeck @ 2019-07-22 20:06 UTC (permalink / raw) To: Vijay Khemka Cc: Jean Delvare, Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed, openbmc @ lists . ozlabs . org, sdasari On Mon, Jul 22, 2019 at 12:24:48PM -0700, Vijay Khemka wrote: > Added new DT binding document for Infineon PXE1610 devices. > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../devicetree/bindings/hwmon/pxe1610.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/pxe1610.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/pxe1610.txt b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > new file mode 100644 > index 000000000000..635daf4955db > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > @@ -0,0 +1,15 @@ > +pxe1610 properties > + > +Required properties: > +- compatible: Must be one of the following: > + - "infineon,pxe1610" for pxe1610 > + - "infineon,pxe1110" for pxe1610 > + - "infineon,pxm1310" for pxm1310 > +- reg: I2C address > + > +Example: > + > +vr@48 { > + compatible = "infineon,pxe1610"; > + reg = <0x48>; > +}; Wouldn't it be better to add this to ./Documentation/devicetree/bindings/trivial-devices.txt ? Thanks, Guenter ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: hwmon: Add binding for pxe1610 2019-07-22 20:06 ` Guenter Roeck @ 2019-07-23 0:12 ` Vijay Khemka 2019-07-23 1:56 ` Guenter Roeck 0 siblings, 1 reply; 11+ messages in thread From: Vijay Khemka @ 2019-07-23 0:12 UTC (permalink / raw) To: Guenter Roeck Cc: Mark Rutland, linux-hwmon, Jean Delvare, Sai Dasari, linux-aspeed, devicetree, Andrew Jeffery, openbmc @ lists . ozlabs . org, linux-kernel, Rob Herring, Joel Stanley, linux-arm-kernel On 7/22/19, 1:06 PM, "Guenter Roeck" <groeck7@gmail.com on behalf of linux@roeck-us.net> wrote: On Mon, Jul 22, 2019 at 12:24:48PM -0700, Vijay Khemka wrote: > Added new DT binding document for Infineon PXE1610 devices. > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../devicetree/bindings/hwmon/pxe1610.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/pxe1610.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/pxe1610.txt b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > new file mode 100644 > index 000000000000..635daf4955db > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > @@ -0,0 +1,15 @@ > +pxe1610 properties > + > +Required properties: > +- compatible: Must be one of the following: > + - "infineon,pxe1610" for pxe1610 > + - "infineon,pxe1110" for pxe1610 > + - "infineon,pxm1310" for pxm1310 > +- reg: I2C address > + > +Example: > + > +vr@48 { > + compatible = "infineon,pxe1610"; > + reg = <0x48>; > +}; Wouldn't it be better to add this to ./Documentation/devicetree/bindings/trivial-devices.txt ? Sure, I didn't know about this file. I will add and send another patch. It is Documentation/devicetree/bindings/trivial-devices.yaml. How do I abandon this patch or just leave it. Thanks, Guenter _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: hwmon: Add binding for pxe1610 2019-07-23 0:12 ` Vijay Khemka @ 2019-07-23 1:56 ` Guenter Roeck 0 siblings, 0 replies; 11+ messages in thread From: Guenter Roeck @ 2019-07-23 1:56 UTC (permalink / raw) To: Vijay Khemka Cc: Jean Delvare, Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed, openbmc @ lists . ozlabs . org, Sai Dasari On 7/22/19 5:12 PM, Vijay Khemka wrote: > > > On 7/22/19, 1:06 PM, "Guenter Roeck" <groeck7@gmail.com on behalf of linux@roeck-us.net> wrote: > > On Mon, Jul 22, 2019 at 12:24:48PM -0700, Vijay Khemka wrote: > > Added new DT binding document for Infineon PXE1610 devices. > > > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > > --- > > .../devicetree/bindings/hwmon/pxe1610.txt | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/hwmon/pxe1610.txt > > > > diff --git a/Documentation/devicetree/bindings/hwmon/pxe1610.txt b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > > new file mode 100644 > > index 000000000000..635daf4955db > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/hwmon/pxe1610.txt > > @@ -0,0 +1,15 @@ > > +pxe1610 properties > > + > > +Required properties: > > +- compatible: Must be one of the following: > > + - "infineon,pxe1610" for pxe1610 > > + - "infineon,pxe1110" for pxe1610 > > + - "infineon,pxm1310" for pxm1310 > > +- reg: I2C address > > + > > +Example: > > + > > +vr@48 { > > + compatible = "infineon,pxe1610"; > > + reg = <0x48>; > > +}; > > Wouldn't it be better to add this to > ./Documentation/devicetree/bindings/trivial-devices.txt ? > Sure, I didn't know about this file. I will add and send another patch. It is > Documentation/devicetree/bindings/trivial-devices.yaml. How do I abandon > this patch or just leave it. > When you send v2, just add the device to the trivial-devices file instead and describe the differences to v1 (ie this patch). Guenter ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card 2019-07-22 19:24 [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Vijay Khemka 2019-07-22 19:24 ` [PATCH] dt-bindings: hwmon: Add binding for pxe1610 Vijay Khemka @ 2019-07-22 19:24 ` Vijay Khemka 2019-07-23 17:22 ` Vijay Khemka 2019-07-23 0:11 ` [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Andrew Jeffery 2 siblings, 1 reply; 11+ messages in thread From: Vijay Khemka @ 2019-07-22 19:24 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Cc: openbmc @ lists . ozlabs . org, sdasari, vijaykhemka Added i2c mux for riser card and multiple ava card and its sensor components for Facebook Tiogapass platform Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> --- .../dts/aspeed-bmc-facebook-tiogapass.dts | 230 ++++++++++++++++++ 1 file changed, 230 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index b7783833a58c..8d0bcb3cd419 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -12,6 +12,27 @@ aliases { serial0 = &uart1; serial4 = &uart5; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; }; chosen { stdout-path = &uart5; @@ -124,6 +145,215 @@ &i2c1 { status = "okay"; //X24 Riser + i2c-switch@71 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + i2c-switch@40 { + compatible = "ti,ina219"; + reg = <0x40>; + }; + + i2c-switch@41 { + compatible = "ti,ina219"; + reg = <0x41>; + }; + + i2c-switch@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + }; + + }; }; &i2c2 { -- 2.17.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card 2019-07-22 19:24 ` [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card Vijay Khemka @ 2019-07-23 17:22 ` Vijay Khemka 2019-07-23 22:33 ` Joel Stanley 0 siblings, 1 reply; 11+ messages in thread From: Vijay Khemka @ 2019-07-23 17:22 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Cc: openbmc @ lists . ozlabs . org, Sai Dasari Team, This patch also needs review. I separated first patch with v2 and that was acked. Please review this as well. Regards -Vijay On 7/22/19, 12:41 PM, "Vijay Khemka" <vijaykhemka@fb.com> wrote: Added i2c mux for riser card and multiple ava card and its sensor components for Facebook Tiogapass platform Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> --- .../dts/aspeed-bmc-facebook-tiogapass.dts | 230 ++++++++++++++++++ 1 file changed, 230 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index b7783833a58c..8d0bcb3cd419 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -12,6 +12,27 @@ aliases { serial0 = &uart1; serial4 = &uart5; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; }; chosen { stdout-path = &uart5; @@ -124,6 +145,215 @@ &i2c1 { status = "okay"; //X24 Riser + i2c-switch@71 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + i2c-switch@40 { + compatible = "ti,ina219"; + reg = <0x40>; + }; + + i2c-switch@41 { + compatible = "ti,ina219"; + reg = <0x41>; + }; + + i2c-switch@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + + }; + + }; }; &i2c2 { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card 2019-07-23 17:22 ` Vijay Khemka @ 2019-07-23 22:33 ` Joel Stanley 2019-07-24 20:42 ` Vijay Khemka 0 siblings, 1 reply; 11+ messages in thread From: Joel Stanley @ 2019-07-23 22:33 UTC (permalink / raw) To: Vijay Khemka Cc: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Andrew Jeffery, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed, openbmc @ lists . ozlabs . org, Sai Dasari On Tue, 23 Jul 2019 at 17:22, Vijay Khemka <vijaykhemka@fb.com> wrote: > > Team, > This patch also needs review. I separated first patch with v2 and that was acked. Please review this as well. Do you have a coworker who has access to the schematics and can review the device tree? They would make a great reviewer. If no reviewer steps forward I will merge it next time I'm merging patches. Cheers, Joel > > Regards > -Vijay > > On 7/22/19, 12:41 PM, "Vijay Khemka" <vijaykhemka@fb.com> wrote: > > Added i2c mux for riser card and multiple ava card and its sensor > components for Facebook Tiogapass platform > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../dts/aspeed-bmc-facebook-tiogapass.dts | 230 ++++++++++++++++++ > 1 file changed, 230 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > index b7783833a58c..8d0bcb3cd419 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > @@ -12,6 +12,27 @@ > aliases { > serial0 = &uart1; > serial4 = &uart5; > + > + /* > + * Hardcode the bus number of i2c switches' channels to > + * avoid breaking the legacy applications. > + */ > + i2c16 = &imux16; > + i2c17 = &imux17; > + i2c18 = &imux18; > + i2c19 = &imux19; > + i2c20 = &imux20; > + i2c21 = &imux21; > + i2c22 = &imux22; > + i2c23 = &imux23; > + i2c24 = &imux24; > + i2c25 = &imux25; > + i2c26 = &imux26; > + i2c27 = &imux27; > + i2c28 = &imux28; > + i2c29 = &imux29; > + i2c30 = &imux30; > + i2c31 = &imux31; > }; > chosen { > stdout-path = &uart5; > @@ -124,6 +145,215 @@ > &i2c1 { > status = "okay"; > //X24 Riser > + i2c-switch@71 { > + compatible = "nxp,pca9544"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x71>; > + > + imux16: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp75@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux20: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux21: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux22: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux23: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux17: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp421@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux24: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux25: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux26: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux27: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux18: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp421@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux28: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux29: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux30: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux31: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux19: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + i2c-switch@40 { > + compatible = "ti,ina219"; > + reg = <0x40>; > + }; > + > + i2c-switch@41 { > + compatible = "ti,ina219"; > + reg = <0x41>; > + }; > + > + i2c-switch@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + }; > + > + }; > }; > > &i2c2 { > -- > 2.17.1 > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card 2019-07-23 22:33 ` Joel Stanley @ 2019-07-24 20:42 ` Vijay Khemka 0 siblings, 0 replies; 11+ messages in thread From: Vijay Khemka @ 2019-07-24 20:42 UTC (permalink / raw) To: Joel Stanley Cc: Mark Rutland, linux-hwmon, Jean Delvare, Sai Dasari, linux-aspeed, devicetree, Andrew Jeffery, openbmc @ lists . ozlabs . org, linux-kernel, Rob Herring, linux-arm-kernel, Guenter Roeck On 7/23/19, 3:34 PM, "Joel Stanley" <joel@jms.id.au> wrote: On Tue, 23 Jul 2019 at 17:22, Vijay Khemka <vijaykhemka@fb.com> wrote: > > Team, > This patch also needs review. I separated first patch with v2 and that was acked. Please review this as well. Do you have a coworker who has access to the schematics and can review the device tree? They would make a great reviewer. Thanks Joel, Please see there is v2 for this and I will ask coworker to review. If no reviewer steps forward I will merge it next time I'm merging patches. Cheers, Joel > > Regards > -Vijay > > On 7/22/19, 12:41 PM, "Vijay Khemka" <vijaykhemka@fb.com> wrote: > > Added i2c mux for riser card and multiple ava card and its sensor > components for Facebook Tiogapass platform > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../dts/aspeed-bmc-facebook-tiogapass.dts | 230 ++++++++++++++++++ > 1 file changed, 230 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > index b7783833a58c..8d0bcb3cd419 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > @@ -12,6 +12,27 @@ > aliases { > serial0 = &uart1; > serial4 = &uart5; > + > + /* > + * Hardcode the bus number of i2c switches' channels to > + * avoid breaking the legacy applications. > + */ > + i2c16 = &imux16; > + i2c17 = &imux17; > + i2c18 = &imux18; > + i2c19 = &imux19; > + i2c20 = &imux20; > + i2c21 = &imux21; > + i2c22 = &imux22; > + i2c23 = &imux23; > + i2c24 = &imux24; > + i2c25 = &imux25; > + i2c26 = &imux26; > + i2c27 = &imux27; > + i2c28 = &imux28; > + i2c29 = &imux29; > + i2c30 = &imux30; > + i2c31 = &imux31; > }; > chosen { > stdout-path = &uart5; > @@ -124,6 +145,215 @@ > &i2c1 { > status = "okay"; > //X24 Riser > + i2c-switch@71 { > + compatible = "nxp,pca9544"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x71>; > + > + imux16: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp75@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux20: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux21: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux22: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux23: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux17: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp421@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux24: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux25: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux26: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux27: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux18: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + ina219@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + tmp421@48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + > + tmp421@49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-switch@73 { > + compatible = "nxp,pca9546"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x73>; > + > + imux28: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + imux29: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + imux30: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux31: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + }; > + > + }; > + > + imux19: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + i2c-switch@40 { > + compatible = "ti,ina219"; > + reg = <0x40>; > + }; > + > + i2c-switch@41 { > + compatible = "ti,ina219"; > + reg = <0x41>; > + }; > + > + i2c-switch@45 { > + compatible = "ti,ina219"; > + reg = <0x45>; > + }; > + > + }; > + > + }; > }; > > &i2c2 { > -- > 2.17.1 > > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices 2019-07-22 19:24 [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Vijay Khemka 2019-07-22 19:24 ` [PATCH] dt-bindings: hwmon: Add binding for pxe1610 Vijay Khemka 2019-07-22 19:24 ` [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card Vijay Khemka @ 2019-07-23 0:11 ` Andrew Jeffery 2019-07-23 0:33 ` Vijay Khemka 2 siblings, 1 reply; 11+ messages in thread From: Andrew Jeffery @ 2019-07-23 0:11 UTC (permalink / raw) To: Vijay Khemka, Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Joel Stanley, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Cc: openbmc @ lists . ozlabs . org, Sai Dasari Hi Vijay, A few nitpicks. On Tue, 23 Jul 2019, at 05:10, Vijay Khemka wrote: > Addes Typo: Adds > Voltage Unnecessary capitalisation. > regulators Infineon pxe1610 devices to Facebook > tiogapass platform. > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../dts/aspeed-bmc-facebook-tiogapass.dts | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > index c4521eda787c..b7783833a58c 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > @@ -144,6 +144,42 @@ > &i2c5 { > status = "okay"; > // CPU Voltage regulators > + vr@48 { The recommended generic name is 'regulator', so e.g. regulator@48 > + compatible = "infineon,pxe1610"; > + reg = <0x48>; > + }; > + vr@4a { > + compatible = "infineon,pxe1610"; > + reg = <0x4a>; > + }; > + vr@50 { > + compatible = "infineon,pxe1610"; > + reg = <0x50>; > + }; > + vr@52 { > + compatible = "infineon,pxe1610"; > + reg = <0x52>; > + }; > + vr@58 { > + compatible = "infineon,pxe1610"; > + reg = <0x58>; > + }; > + vr@5a { > + compatible = "infineon,pxe1610"; > + reg = <0x5a>; > + }; > + vr@68 { > + compatible = "infineon,pxe1610"; > + reg = <0x68>; > + }; > + vr@70 { > + compatible = "infineon,pxe1610"; > + reg = <0x70>; > + }; > + vr@72 { > + compatible = "infineon,pxe1610"; > + reg = <0x72>; > + }; > }; > > &i2c6 { > -- > 2.17.1 > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices 2019-07-23 0:11 ` [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Andrew Jeffery @ 2019-07-23 0:33 ` Vijay Khemka 0 siblings, 0 replies; 11+ messages in thread From: Vijay Khemka @ 2019-07-23 0:33 UTC (permalink / raw) To: Andrew Jeffery, Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland, Joel Stanley, linux-hwmon, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Cc: openbmc @ lists . ozlabs . org, Sai Dasari On 7/22/19, 5:12 PM, "Andrew Jeffery" <andrew@aj.id.au> wrote: Hi Vijay, A few nitpicks. On Tue, 23 Jul 2019, at 05:10, Vijay Khemka wrote: > Addes Typo: Adds Ack > Voltage Unnecessary capitalisation. Ack > regulators Infineon pxe1610 devices to Facebook > tiogapass platform. > > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> > --- > .../dts/aspeed-bmc-facebook-tiogapass.dts | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > index c4521eda787c..b7783833a58c 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts > @@ -144,6 +144,42 @@ > &i2c5 { > status = "okay"; > // CPU Voltage regulators > + vr@48 { The recommended generic name is 'regulator', so e.g. regulator@48 Ack: Submitted v2 for this patch. > + compatible = "infineon,pxe1610"; > + reg = <0x48>; > + }; > + vr@4a { > + compatible = "infineon,pxe1610"; > + reg = <0x4a>; > + }; > + vr@50 { > + compatible = "infineon,pxe1610"; > + reg = <0x50>; > + }; > + vr@52 { > + compatible = "infineon,pxe1610"; > + reg = <0x52>; > + }; > + vr@58 { > + compatible = "infineon,pxe1610"; > + reg = <0x58>; > + }; > + vr@5a { > + compatible = "infineon,pxe1610"; > + reg = <0x5a>; > + }; > + vr@68 { > + compatible = "infineon,pxe1610"; > + reg = <0x68>; > + }; > + vr@70 { > + compatible = "infineon,pxe1610"; > + reg = <0x70>; > + }; > + vr@72 { > + compatible = "infineon,pxe1610"; > + reg = <0x72>; > + }; > }; > > &i2c6 { > -- > 2.17.1 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-07-24 20:42 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-07-22 19:24 [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Vijay Khemka 2019-07-22 19:24 ` [PATCH] dt-bindings: hwmon: Add binding for pxe1610 Vijay Khemka 2019-07-22 20:06 ` Guenter Roeck 2019-07-23 0:12 ` Vijay Khemka 2019-07-23 1:56 ` Guenter Roeck 2019-07-22 19:24 ` [PATCH 2/2] ARM: dts: aspeed: tiogapass: Add Riser card Vijay Khemka 2019-07-23 17:22 ` Vijay Khemka 2019-07-23 22:33 ` Joel Stanley 2019-07-24 20:42 ` Vijay Khemka 2019-07-23 0:11 ` [PATCH 1/2] ARM: dts: aspeed: tiogapass: Add VR devices Andrew Jeffery 2019-07-23 0:33 ` Vijay Khemka
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).