devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/22] This patchset holds some common changes that were never upstreamed.
@ 2019-07-30 14:46 Philippe Schenker
  2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
                   ` (21 more replies)
  0 siblings, 22 replies; 33+ messages in thread
From: Philippe Schenker @ 2019-07-30 14:46 UTC (permalink / raw)
  To: marcel.ziswiler, max.krummenacher, stefan, devicetree,
	Rob Herring, Shawn Guo, Mark Rutland
  Cc: Sascha Hauer, linux-kernel, Philippe Schenker, NXP Linux Team,
	Pengutronix Kernel Team, Fabio Estevam, linux-arm-kernel

From: Philippe Schenker <philippe.schenker@toradex.com>

With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe


Marcel Ziswiler (1):
  ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
  ARM: dts: imx6ull-colibri: reduce v_batt current in power off
  ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
  ARM: dts: add recovery for I2C for iMX7

Philippe Schenker (15):
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: Add sleep mode to ethernet
  ARM: dts: imx7-colibri: Add touch controllers
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
  ARM: dts: imx6: Add sleep state to can interfaces
  ARM: dts: imx6: Add touchscreens used on Toradex eval boards
  ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board
  ARM: dts: apalis-imx6: Add some example I2C devices
  ARM: dts: apalis-imx6: Add some optional I2C devices
  ARM: dts: imx6ull-colibri: Add sleep mode to fec
  ARM: dts: imx6ull-colibri: Add watchdog
  ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
  ARM: dts: imx6/7-colibri: switch dr_mode to otg
  ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board

Stefan Agner (3):
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: add GPIO wakeup key
  ARM: dts: imx7-colibri: fix 1.8V/UHS support

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts  |  52 ++++++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts       | 122 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts |  19 +++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |  19 +++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  27 +++-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi        |  27 +++-
 .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  63 +++++++++
 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  52 +++++++-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi   |  51 ++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi           | 114 ++++++++++++++--
 12 files changed, 524 insertions(+), 26 deletions(-)

-- 
2.22.0

^ permalink raw reply	[flat|nested] 33+ messages in thread

end of thread, other threads:[~2019-07-31 11:37 UTC | newest]

Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-30 14:46 [PATCH 00/22] This patchset holds some common changes that were never upstreamed Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46 ` [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-31  7:14   ` Michal Vokáč
2019-07-31 11:13     ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 20:46   ` Fabio Estevam
2019-07-31  6:43     ` Philippe Schenker
2019-07-31  6:54       ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-31  7:09   ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 20:53   ` Fabio Estevam
2019-07-31 11:36     ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 20:43   ` Fabio Estevam
2019-07-31 11:37     ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46 ` [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board Philippe Schenker

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox