Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 306/542] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco
Date: Fri, 14 Feb 2020 10:44:58 -0500
Message-ID: <20200214154854.6746-306-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Benjamin Gaignard <benjamin.gaignard@st.com>

[ Upstream commit 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 ]

Add a fixed regulator and use it as power supply for DSI panel.

Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco")

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f469-disco.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index f3ce477b7bae6..9397db0c43de2 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -76,6 +76,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -155,6 +162,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
-- 
2.20.1


  parent reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 057/542] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 072/542] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 170/542] arm64: dts: rockchip: Fix NanoPC-T4 cooling maps Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 172/542] arm64: dts: uDPU: fix broken ethernet Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 183/542] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 184/542] arm64: dts: allwinner: H5: Add PMU node Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 185/542] arm: dts: allwinner: H3: " Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 187/542] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 189/542] arm64: dts: qcom: msm8998: Fix tcsr syscon size Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 192/542] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 198/542] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 199/542] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 246/542] ARM: dts: r8a7779: Add device node for ARM global timer Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 247/542] arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from sound Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 251/542] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 297/542] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 300/542] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 301/542] ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP Sasha Levin
2020-02-14 15:44 ` Sasha Levin [this message]
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 318/542] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 319/542] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 329/542] arm64: dts: rockchip: fix dwmmc clock name for px30 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 330/542] arm64: dts: rockchip: fix dwmmc clock name for rk3308 Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 331/542] arm64: dts: rockchip: add reg property to brcmf sub-nodes Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 332/542] ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 349/542] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 354/542] MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1 Sasha Levin
2020-02-14 15:46 ` [PATCH AUTOSEL 5.5 396/542] arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 450/542] ARM: dts: am43xx: add support for clkout1 clock Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-306-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git