From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Ricardo Cañuelo" <ricardo.canuelo@collabora.com>
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, geert+renesas@glider.be,
robh+dt@kernel.org, xuwei5@hisilicon.com
Subject: Re: [PATCH v2 1/6] arm64: dts: renesas: make hdmi encoder nodes compliant with DT bindings
Date: Thu, 14 May 2020 04:33:43 +0300 [thread overview]
Message-ID: <20200514013343.GA7425@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20200511110611.3142-2-ricardo.canuelo@collabora.com>
Hi Ricardo,
Thank you for the patch.
On Mon, May 11, 2020 at 01:06:06PM +0200, Ricardo Cañuelo wrote:
> Small fixes to make these DTs compliant with the adi,adv7511w binding.
>
> r8a77970-eagle.dts,
> r8a77970-v3msk.dts,
> r8a77980-condor.dts,
> r8a77980-v3hsk.dts,
> r8a77990-ebisu.dts:
> remove the adi,input-style and adi,input-justification properties.
>
> r8a77995-draak.dts:
> Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove
> the adi,input-style and adi,input-justification properties.
>
> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 --
> arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 --
> arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 2 --
> arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 2 --
> arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 --
> arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 6 ++----
> 6 files changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> index 2afb91ec9c8d..ac2156ab3e62 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -137,8 +137,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
> index d7c7b9156e08..01c4ba0f7be1 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
> @@ -150,8 +150,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> index 3dde028e22a6..ef8350a062af 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> @@ -174,8 +174,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> index adbfd8f07d06..6dff04693223 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> @@ -141,8 +141,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> index 4fd2b14fbb8b..dc24cec46ae1 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> @@ -360,8 +360,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> index 67634cb01d6b..79c73a99d2fe 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> @@ -272,8 +272,8 @@
>
> hdmi-encoder@39 {
> compatible = "adi,adv7511w";
> - reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
> - reg-names = "main", "edid", "packet", "cec";
> + reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
> + reg-names = "main", "edid", "cec", "packet";
> interrupt-parent = <&gpio1>;
> interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
>
> @@ -284,8 +284,6 @@
> adi,input-depth = <8>;
> adi,input-colorspace = "rgb";
> adi,input-clock = "1x";
> - adi,input-style = <1>;
> - adi,input-justification = "evenly";
>
> ports {
> #address-cells = <1>;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2020-05-14 1:33 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 11:06 [PATCH v2 0/6] Convert adi,adv7511.txt DT bindings to yaml Ricardo Cañuelo
2020-05-11 11:06 ` [PATCH v2 1/6] arm64: dts: renesas: make hdmi encoder nodes compliant with DT bindings Ricardo Cañuelo
2020-05-11 11:51 ` Geert Uytterhoeven
2020-05-14 1:33 ` Laurent Pinchart [this message]
2020-05-11 11:06 ` [PATCH v2 2/6] ARM: " Ricardo Cañuelo
2020-05-11 11:51 ` Geert Uytterhoeven
2020-05-14 1:34 ` Laurent Pinchart
2020-05-11 11:06 ` [PATCH v2 3/6] ARM: dts: zynq: add port definitions to hdmi-tx@39 Ricardo Cañuelo
2020-05-11 12:24 ` Ezequiel Garcia
2020-05-11 12:52 ` Michal Simek
2020-05-14 1:36 ` Laurent Pinchart
2020-05-11 11:06 ` [PATCH v2 4/6] arm64: dts: hisilicon: hikey: fixes to comply with adi,adv7533 DT binding Ricardo Cañuelo
2020-05-14 1:37 ` Laurent Pinchart
2020-08-04 20:57 ` [PATCH v2 4/6] arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 " John Stultz
2020-08-04 21:24 ` John Stultz
2020-05-11 11:06 ` [PATCH v2 5/6] ARM: dts: iwg20d-q7-dbcm-ca: remove unneeded properties in hdmi@39 Ricardo Cañuelo
2020-05-11 11:52 ` Geert Uytterhoeven
2020-05-14 1:37 ` Laurent Pinchart
2020-05-11 11:06 ` [PATCH v2 6/6] dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml Ricardo Cañuelo
2020-05-14 1:54 ` Laurent Pinchart
2020-05-14 9:36 ` Ricardo Cañuelo
2020-05-14 15:22 ` Laurent Pinchart
2020-05-18 21:27 ` Rob Herring
2020-05-25 7:43 ` Ricardo Cañuelo
2020-05-26 1:44 ` Laurent Pinchart
2020-05-26 7:03 ` Geert Uytterhoeven
2020-05-26 10:11 ` Laurent Pinchart
2020-05-26 10:39 ` Geert Uytterhoeven
2020-05-26 19:45 ` Ezequiel Garcia
2020-05-27 17:29 ` Rob Herring
2020-05-27 18:18 ` Geert Uytterhoeven
2020-05-28 6:36 ` Ricardo Cañuelo
2020-05-11 11:55 ` [PATCH v2 0/6] Convert adi,adv7511.txt DT bindings " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200514013343.GA7425@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=ricardo.canuelo@collabora.com \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).