Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
	linux-renesas-soc@vger.kernel.org,
	Leon Luo <leonl@leopardimaging.com>
Subject: [PATCH 5/8] dt-bindings: media: imx274: Convert to json-schema
Date: Wed, 15 Jul 2020 16:09:48 +0200
Message-ID: <20200715140951.90753-6-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200715140951.90753-1-jacopo+renesas@jmondi.org>

Convert the imx274 bindings document to json-schema and update
the MAINTAINERS file accordingly.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 .../devicetree/bindings/media/i2c/imx274.txt  | 33 ---------
 .../devicetree/bindings/media/i2c/imx274.yaml | 74 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 75 insertions(+), 34 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
deleted file mode 100644
index 80f2e89568e1..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
-
-The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 3864H x 2202V. It is programmable through I2C
-interface. The I2C address is fixed to 0x1a as per sensor data sheet.
-Image data is sent through MIPI CSI-2, which is configured as 4 lanes
-at 1440 Mbps.
-
-
-Required Properties:
-- compatible: value should be "sony,imx274" for imx274 sensor
-- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx274 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	sensor@1a {
-		compatible = "sony,imx274";
-		reg = <0x1a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reset-gpios = <&gpio_sensor 0 0>;
-		port {
-			sensor_out: endpoint {
-				remote-endpoint = <&csiss_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.yaml b/Documentation/devicetree/bindings/media/i2c/imx274.yaml
new file mode 100644
index 000000000000..acbc5690cad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: -|
+  The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+  an active array size of 3864H x 2202V. It is programmable through I2C
+  interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+  at 1440 Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  reset-gpios:
+    description: Sensor reset GPIO.
+    maxItems: 1
+
+  port:
+    type: object
+    description: |
+      The device node must contain one 'port' child node for its digital output
+      video port, in accordance with the video interface bindings defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      endpoint:
+        type: object
+        properties:
+          remote-endpoint:
+            description: A phandle to the bus receiver's endpoint node.
+
+        required:
+          - remote-endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - port
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f9b94aaea84..a30f08ddaead 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15922,7 +15922,7 @@ M:	Leon Luo <leonl@leopardimaging.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/i2c/imx274.txt
+F:	Documentation/devicetree/bindings/media/i2c/imx274.yaml
 F:	drivers/media/i2c/imx274.c

 SONY IMX290 SENSOR DRIVER
--
2.27.0


  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-15 14:09 [PATCH 0/8] dt-bindings: media: i2c: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 1/8] dt-bindings: media: ov5640: " Jacopo Mondi
2020-07-15 17:04   ` Steve Longerbeam
2020-07-16  7:06     ` Jacopo Mondi
2020-07-16  1:53   ` Laurent Pinchart
2020-07-16  7:04     ` Jacopo Mondi
2020-07-16 13:08       ` Laurent Pinchart
2020-07-16  7:52     ` Geert Uytterhoeven
2020-07-16 14:51   ` Rob Herring
2020-07-15 14:09 ` [PATCH 2/8] dt-bindings: media: ov5645: " Jacopo Mondi
2020-07-15 15:31   ` Manivannan Sadhasivam
2020-07-15 14:09 ` [PATCH 3/8] dt-bindings: media: mt9v111: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 4/8] dt-bindings: media: imx290: " Jacopo Mondi
2020-07-15 14:09 ` Jacopo Mondi [this message]
2020-07-15 14:09 ` [PATCH 6/8] dt-bindings: media: imx214: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 7/8] dt-bindings: media: ov772x: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 8/8] dt-bindings: media: i2c: Add prefix to yaml bindings Jacopo Mondi
2020-08-17 15:12 ` [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200715140951.90753-6-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=leonl@leopardimaging.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git