From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org
Cc: mchehab@kernel.org, sakari.ailus@linux.intel.com,
hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
linux-renesas-soc@vger.kernel.org,
Todor Tomov <todor.too@gmail.com>
Subject: Re: [PATCH 2/8] dt-bindings: media: ov5645: Convert to json-schema
Date: Wed, 15 Jul 2020 21:01:23 +0530 [thread overview]
Message-ID: <60FF8603-ACA1-4CAF-B43B-04E974A8E4C4@linaro.org> (raw)
In-Reply-To: <20200715140951.90753-3-jacopo+renesas@jmondi.org>
Hi Jacopo,
On 15 July 2020 7:39:45 PM IST, Jacopo Mondi <jacopo+renesas@jmondi.org> wrote:
>Convert the ov5645 bindings document to json-schema and update
>the MAINTAINERS file accordingly, as the entry was not documented.
>
>Add myself as maintainer for odd fixes only, as I don't have the
>sensor to test with.
>
>Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>---
>
>Hello Todor, Manivannan
> I've added in this patch an entry for ov5645 in the MAINTAINERS
>file, and I've added myself as maintainers for Odd Fixes only.
>
>As you seem to be the author and committers of this bindings
>respectively,
>would you be interested in maintaining this driver ?
I've worked on this driver in the past. So yeah, feel free to add myself and since Todor has authored the driver, it makes sense to add him too.
Thanks,
Mani
>
>---
> .../devicetree/bindings/media/i2c/ov5645.txt | 54 --------
> .../devicetree/bindings/media/i2c/ov5645.yaml | 123 ++++++++++++++++++
> MAINTAINERS | 8 ++
> 3 files changed, 131 insertions(+), 54 deletions(-)
>delete mode 100644
>Documentation/devicetree/bindings/media/i2c/ov5645.txt
>create mode 100644
>Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>
>diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>deleted file mode 100644
>index 72ad992f77be..000000000000
>--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>+++ /dev/null
>@@ -1,54 +0,0 @@
>-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
>-
>-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image
>sensor with
>-an active array size of 2592H x 1944V. It is programmable through a
>serial I2C
>-interface.
>-
>-Required Properties:
>-- compatible: Value should be "ovti,ov5645".
>-- clocks: Reference to the xclk clock.
>-- clock-names: Should be "xclk".
>-- clock-frequency: Frequency of the xclk clock.
>-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This
>corresponds
>- to the hardware pin PWDNB which is physically active low.
>-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This
>corresponds to
>- the hardware pin RESETB.
>-- vdddo-supply: Chip digital IO regulator.
>-- vdda-supply: Chip analog regulator.
>-- vddd-supply: Chip digital core regulator.
>-
>-The device node must contain one 'port' child node for its digital
>output
>-video port, in accordance with the video interface bindings defined in
>-Documentation/devicetree/bindings/media/video-interfaces.txt.
>-
>-Example:
>-
>- &i2c1 {
>- ...
>-
>- ov5645: ov5645@3c {
>- compatible = "ovti,ov5645";
>- reg = <0x3c>;
>-
>- enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>- reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
>- pinctrl-names = "default";
>- pinctrl-0 = <&camera_rear_default>;
>-
>- clocks = <&clks 200>;
>- clock-names = "xclk";
>- clock-frequency = <24000000>;
>-
>- vdddo-supply = <&camera_dovdd_1v8>;
>- vdda-supply = <&camera_avdd_2v8>;
>- vddd-supply = <&camera_dvdd_1v2>;
>-
>- port {
>- ov5645_ep: endpoint {
>- clock-lanes = <1>;
>- data-lanes = <0 2>;
>- remote-endpoint = <&csi0_ep>;
>- };
>- };
>- };
>- };
>diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>new file mode 100644
>index 000000000000..ff52d0fffb74
>--- /dev/null
>+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>@@ -0,0 +1,123 @@
>+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>+%YAML 1.2
>+---
>+$id: http://devicetree.org/schemas/media/i2c/ov5645.yaml#
>+$schema: http://devicetree.org/meta-schemas/core.yaml#
>+
>+title: Omnivision OV5645 1/4 Inch 5Mp CMOS Digital Image Sensor
>+
>+maintainers:
>+ - Jacopo Mondi <jacopo@jmondi.org>
>+
>+description: -|
>+ The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image
>sensor
>+ with an active array size of 2592H x 1944V. It is programmable
>through a
>+ serial I2C interface.
>+
>+properties:
>+ compatible:
>+ const: ovti,ov5645
>+
>+ reg:
>+ description: I2C device address
>+ maxItems: 1
>+
>+ clocks:
>+ description: Reference to the xclk clock.
>+ maxItems: 1
>+
>+ clock-names:
>+ description: Should be "xclk".
>+ maxItems: 1
>+
>+ clock-frequency:
>+ description: Frequency of the xclk clock.
>+
>+ enable-gpios:
>+ description: |
>+ Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
>+ to the hardware pin PWDNB which is physically active low.
>+ maxItems: 1
>+
>+ reset-gpios:
>+ description: |
>+ Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds
>to
>+ the hardware pin RESETB.
>+ maxItems: 1
>+
>+ vdddo-supply:
>+ description: Chip digital IO regulator.
>+ maxItems: 1
>+
>+ vdda-supply:
>+ description: Chip analog regulator.
>+ maxItems: 1
>+
>+ vddd-supply:
>+ description: Chip digital core regulator.
>+ maxItems: 1
>+
>+ port:
>+ type: object
>+ description: |
>+ The device node must contain one 'port' child node for its
>digital output
>+ video port, in accordance with the video interface bindings
>defined in
>+ Documentation/devicetree/bindings/media/video-interfaces.txt.
>+
>+ properties:
>+ endpoint:
>+ type: object
>+ properties:
>+ remote-endpoint:
>+ description: A phandle to the bus receiver's endpoint
>node.
>+
>+ required:
>+ - remote-endpoint
>+
>+ additionalProperties: false
>+
>+required:
>+ - compatible
>+ - reg
>+ - clocks
>+ - clock-names
>+ - clock-frequency
>+ - vdddo-supply
>+ - vdda-supply
>+ - vddd-supply
>+ - port
>+
>+examples:
>+ - |
>+ #include <dt-bindings/gpio/gpio.h>
>+
>+ i2c0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+
>+ camera@3c {
>+ compatible = "ovti,ov5645";
>+ reg = <0x3c>;
>+
>+ enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>+ reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
>+
>+ clocks = <&clks 200>;
>+ clock-names = "xclk";
>+ clock-frequency = <24000000>;
>+
>+ vdddo-supply = <&camera_dovdd_1v8>;
>+ vdda-supply = <&camera_avdd_2v8>;
>+ vddd-supply = <&camera_dvdd_1v2>;
>+
>+ port {
>+ ov5645_ep: endpoint {
>+ clock-lanes = <1>;
>+ data-lanes = <0 2>;
>+ remote-endpoint = <&csi0_ep>;
>+ };
>+ };
>+ };
>+ };
>+
>+...
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 0160d7567ed3..bf8902ebbe30 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -12607,6 +12607,14 @@ T: git git://linuxtv.org/media_tree.git
> F: drivers/media/i2c/ov5640.c
> F: Documentation/devicetree/bindings/media/i2c/ov5640.yaml
>
>+OMNIVISION OV5645 SENSOR DRIVER
>+M: Jacopo Mondi <jacopo@jmondi.org>
>+L: linux-media@vger.kernel.org
>+S: Odd Fixes
>+T: git git://linuxtv.org/media_tree.git
>+F: drivers/media/i2c/ov5645.c
>+F: Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>+
> OMNIVISION OV5647 SENSOR DRIVER
> M: Jacopo Mondi <jacopo@jmondi.org>
> M: Dave Stevenson <dave.stevenson@raspberrypi.com>
>--
>2.27.0
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
next prev parent reply other threads:[~2020-07-15 15:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 14:09 [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
2020-07-15 14:09 ` [PATCH 1/8] dt-bindings: media: ov5640: " Jacopo Mondi
2020-07-15 17:04 ` Steve Longerbeam
2020-07-16 7:06 ` Jacopo Mondi
2020-07-16 1:53 ` Laurent Pinchart
2020-07-16 7:04 ` Jacopo Mondi
2020-07-16 13:08 ` Laurent Pinchart
2020-07-16 7:52 ` Geert Uytterhoeven
2020-07-16 14:51 ` Rob Herring
2020-07-15 14:09 ` [PATCH 2/8] dt-bindings: media: ov5645: " Jacopo Mondi
2020-07-15 15:31 ` Manivannan Sadhasivam [this message]
2020-07-15 14:09 ` [PATCH 3/8] dt-bindings: media: mt9v111: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 4/8] dt-bindings: media: imx290: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 5/8] dt-bindings: media: imx274: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 6/8] dt-bindings: media: imx214: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 7/8] dt-bindings: media: ov772x: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 8/8] dt-bindings: media: i2c: Add prefix to yaml bindings Jacopo Mondi
2020-08-17 15:12 ` [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60FF8603-ACA1-4CAF-B43B-04E974A8E4C4@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).