From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH] ARM: dts: iwg22d-sodimm: Fix dt nodes sorting
Date: Wed, 29 Jul 2020 13:26:02 +0100 [thread overview]
Message-ID: <20200729122602.9561-1-biju.das.jz@bp.renesas.com> (raw)
Some device nodes in the r8a7745-iwg22d-sodimm.dts are not sorted
alphabetically. This patch fixes the sorting of nodes and also fixes a
typo in the stmpe node.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
This patch is tested against renesas-devel
---
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 104 ++++++++++----------
1 file changed, 52 insertions(+), 52 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index b15b1b088a32..5f7f230de529 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -53,6 +53,25 @@
clock-frequency = <26000000>;
};
+ backlight_lcd: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
+ lcd_panel: lcd {
+ compatible = "edt,etm043080dh6gp";
+ power-supply = <&vccq_panel>;
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+ };
+
rsnd_sgtl5000: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -68,18 +87,6 @@
};
};
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
vccq_panel: regulator-vccq-panel {
compatible = "regulator-fixed";
regulator-name = "Panel VccQ";
@@ -89,38 +96,16 @@
enable-active-high;
};
- backlight_lcd: backlight {
- compatible = "pwm-backlight";
- pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <7>;
- };
-
- lcd_panel: lcd {
- compatible = "edt,etm043080dh6gp";
- power-supply = <&vccq_panel>;
- backlight = <&backlight_lcd>;
-
- port {
- lcd_in: endpoint {
- remote-endpoint = <&du_out_rgb0>;
- };
- };
- };
-};
-
-&du {
- pinctrl-0 = <&du0_pins>;
- pinctrl-names = "default";
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
- status = "okay";
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&lcd_in>;
- };
- };
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
};
};
@@ -150,6 +135,21 @@
status = "okay";
};
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+};
+
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
@@ -171,6 +171,15 @@
status = "okay";
clock-frequency = <400000>;
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ clocks = <&audio_clock>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
stmpe811@44 {
compatible = "st,stmpe811";
reg = <0x44>;
@@ -179,7 +188,7 @@
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
- /* ADC converstion time: 80 clocks */
+ /* ADC conversion time: 80 clocks */
st,sample-time = <4>;
/* 12-bit ADC */
st,mod-12b = <1>;
@@ -203,15 +212,6 @@
st,touch-det-delay = <5>;
};
};
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- #sound-dai-cells = <0>;
- reg = <0x0a>;
- clocks = <&audio_clock>;
- VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
- };
};
&pci1 {
--
2.17.1
next reply other threads:[~2020-07-29 12:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 12:26 Biju Das [this message]
2020-07-29 20:38 ` [PATCH] ARM: dts: iwg22d-sodimm: Fix dt nodes sorting Lad, Prabhakar
2020-08-05 11:41 ` Geert Uytterhoeven
2020-08-05 12:16 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200729122602.9561-1-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).