* [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name
@ 2020-09-22 9:23 Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible Stefan Riedmueller
` (6 more replies)
0 siblings, 7 replies; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Stefan Riedmueller
The touchscreen subnode name needs to be stmpe_touchscreen as mentioned
in the dt-bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index f1412df89173..2a3801e349b6 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -139,7 +139,7 @@ stmpe: touchscreen@44 {
pinctrl-0 = <&pinctrl_stmpe>;
status = "disabled";
- touchscreen {
+ stmpe_touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
@ 2020-09-22 9:23 ` Stefan Riedmueller
2020-10-28 8:48 ` Shawn Guo
2020-09-22 9:23 ` [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize Stefan Riedmueller
` (5 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Stefan Riedmueller
Set the correct EEPROM compatible for phyCORE-i.MX 6 and phyFLEX-i.MX 6,
as stated in the device tree bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index bc43c75f1745..aa7fdb9ea5bd 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -116,7 +116,7 @@ &i2c1 {
status = "okay";
som_eeprom: eeprom@50 {
- compatible = "atmel,24c32";
+ compatible = "catalyst,24c32", "atmel,24c32";
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 41ebe4599e43..a3f4e8f6cc9e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -84,7 +84,7 @@ &i2c3 {
status = "okay";
eeprom@50 {
- compatible = "atmel,24c32";
+ compatible = "st,24c32", "atmel,24c32";
reg = <0x50>;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible Stefan Riedmueller
@ 2020-09-22 9:23 ` Stefan Riedmueller
2020-10-28 8:50 ` Shawn Guo
2020-09-22 9:23 ` [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL Stefan Riedmueller
` (4 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Stefan Riedmueller
Defining the EEPROM pagesize can increase the write speed significantly.
Set it to the pagesize stated in the EEPROM's datasheet for
phyCORE-i.MX 6UL, phyCORE-i.MX 6 and phyFLEX-i.MX 6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 +
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index aa7fdb9ea5bd..87adfb735f95 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -117,6 +117,7 @@ &i2c1 {
som_eeprom: eeprom@50 {
compatible = "catalyst,24c32", "atmel,24c32";
+ pagesize = <32>;
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index a3f4e8f6cc9e..a80aa08a37cb 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -85,6 +85,7 @@ &i2c3 {
eeprom@50 {
compatible = "st,24c32", "atmel,24c32";
+ pagesize = <32>;
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index ce14ce685d12..11fa3fb5947b 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -75,6 +75,7 @@ &i2c1 {
eeprom@52 {
compatible = "catalyst,24c32", "atmel,24c32";
+ pagesize = <32>;
reg = <0x52>;
};
};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize Stefan Riedmueller
@ 2020-09-22 9:23 ` Stefan Riedmueller
2020-10-28 8:46 ` Shawn Guo
2020-09-22 9:23 ` [PATCH 5/6] ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter Stefan Riedmueller
` (3 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Yunus Bas, Stefan Riedmueller
From: Yunus Bas <y.bas@phytec.de>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 93 +++++++++++++++++++
2 files changed, 94 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..81ede0707a51 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -615,6 +615,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-pico-dwarf.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb \
+ imx6ul-phytec-segin-ff-rdk-emmc.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 000000000000..934c05fad615
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
+ compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10",
+ "phytec,imx6ul-pcl063","fsl,imx6ul";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&tlv320 {
+ status = "okay";
+};
+
+&ecspi3 {
+ status = "okay";
+};
+
+ðphy1 {
+ status = "okay";
+};
+
+ðphy2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&fec2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+®_can1_en {
+ status = "okay";
+};
+
+®_sound_1v8 {
+ status = "okay";
+};
+
+®_sound_3v3 {
+ status = "okay";
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 5/6] ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
` (2 preceding siblings ...)
2020-09-22 9:23 ` [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL Stefan Riedmueller
@ 2020-09-22 9:23 ` Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 6/6] ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source Stefan Riedmueller
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Stefan Riedmueller
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel
LCD display to the phyBOARD-Segin full featured, either with capacitive
or resistive touch.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
.../dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 1 +
.../dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 1 +
.../dts/imx6ul-phytec-segin-peb-av-02.dtsi | 150 ++++++++++++++++++
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 43 -----
.../dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 1 +
.../dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 1 +
.../dts/imx6ull-phytec-segin-peb-av-02.dtsi | 26 +++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 7 -
8 files changed, 180 insertions(+), 50 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
index 934c05fad615..83ef5af0501e 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
@@ -9,6 +9,7 @@
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index bfda5eda7a25..8296059c0084 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -9,6 +9,7 @@
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 000000000000..86898546627c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2016, 2020 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/ {
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ power-supply = <®_backlight_en>;
+ pwms = <&pwm3 0 5000000>;
+ status = "disabled";
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "edt,etm0700g0edh6";
+ backlight = <&backlight_lcd>;
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcdif_parallel_out>;
+ };
+ };
+ };
+
+ reg_backlight_en: regulator-backlight-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_en>;
+ regulator-name = "backlight-lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat>;
+ status = "disabled";
+
+ port {
+ lcdif_parallel_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+};
+
+&i2c1 {
+ edt_ft5406: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5406>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ stmpe: touchscreen@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio5>;
+ status = "disabled";
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ touchscreen-inverted-x = <1>;
+ touchscreen-inverted-y = <1>;
+ };
+ };
+};
+
+&pwm3 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_edt_ft5406: edtft5406grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_backlight_en: bachlightengrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 2a3801e349b6..df8d228df89d 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -130,31 +130,6 @@ tlv320: codec@18 {
status = "disabled";
};
- stmpe: touchscreen@44 {
- compatible = "st,stmpe811";
- reg = <0x44>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_stmpe>;
- status = "disabled";
-
- stmpe_touchscreen {
- compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
- st,fraction-z = <7>;
- st,i-drive = <1>;
- touchscreen-inverted-x = <1>;
- touchscreen-inverted-y = <1>;
- };
- };
-
i2c_rtc: rtc@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_int>;
@@ -176,12 +151,6 @@ ethphy2: ethernet-phy@2 {
};
};
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "disabled";
-};
-
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
@@ -267,12 +236,6 @@ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
>;
};
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
- >;
- };
-
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
@@ -289,12 +252,6 @@ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
>;
};
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
-
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
index 9648d4ecaf58..8e2a4c5d7765 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -9,6 +9,7 @@
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
index 656baf846453..c8d3eff9ed4b 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -9,6 +9,7 @@
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
new file mode 100644
index 000000000000..06bb7f327780
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+
+&iomuxc {
+ /delete-node/ edtft5406grp;
+ /delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+ pinctrl_edt_ft5406: edtft5406grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
index c1595fc785f7..e287a0453b5f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
@@ -14,7 +14,6 @@ / {
&iomuxc {
/delete-node/ flexcan1engrp;
/delete-node/ rtcintgrp;
- /delete-node/ stmpegrp;
};
&iomuxc_snvs {
@@ -29,10 +28,4 @@ pinctrl_rtc_int: rtcintgrp {
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
-
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 6/6] ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
` (3 preceding siblings ...)
2020-09-22 9:23 ` [PATCH 5/6] ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter Stefan Riedmueller
@ 2020-09-22 9:23 ` Stefan Riedmueller
2020-10-27 14:17 ` [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmüller
2020-10-28 8:48 ` Shawn Guo
6 siblings, 0 replies; 12+ messages in thread
From: Stefan Riedmueller @ 2020-09-22 9:23 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Stefan Riedmueller
Mark the STMPE resistive touch controller as a wakeup-source.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
index 86898546627c..610b778c753a 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -70,6 +70,7 @@ stmpe: touchscreen@44 {
pinctrl-0 = <&pinctrl_stmpe>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio5>;
+ wakeup-source;
status = "disabled";
stmpe_touchscreen {
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
` (4 preceding siblings ...)
2020-09-22 9:23 ` [PATCH 6/6] ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source Stefan Riedmueller
@ 2020-10-27 14:17 ` Stefan Riedmüller
2020-10-28 8:48 ` Shawn Guo
6 siblings, 0 replies; 12+ messages in thread
From: Stefan Riedmüller @ 2020-10-27 14:17 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer, Fabio Estevam
Hi,
just a gentle ping for this series.
Stefan
On 22.09.20 11:23, Stefan Riedmueller wrote:
> The touchscreen subnode name needs to be stmpe_touchscreen as mentioned
> in the dt-bindings.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
> index f1412df89173..2a3801e349b6 100644
> --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
> +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
> @@ -139,7 +139,7 @@ stmpe: touchscreen@44 {
> pinctrl-0 = <&pinctrl_stmpe>;
> status = "disabled";
>
> - touchscreen {
> + stmpe_touchscreen {
> compatible = "st,stmpe-ts";
> st,sample-time = <4>;
> st,mod-12b = <1>;
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
2020-09-22 9:23 ` [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL Stefan Riedmueller
@ 2020-10-28 8:46 ` Shawn Guo
2020-10-28 8:55 ` Stefan Riedmüller
0 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2020-10-28 8:46 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Yunus Bas
On Tue, Sep 22, 2020 at 11:23:11AM +0200, Stefan Riedmueller wrote:
> From: Yunus Bas <y.bas@phytec.de>
>
> Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
> eMMC and following features:
> - i.MX 6UL
> - 512 MB RAM
> - eMMC
> - USB Host/OTG
> - 2x 100 Mbit/s Ethernet
> - RS232
> - CAN
>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 93 +++++++++++++++++++
> 2 files changed, 94 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..81ede0707a51 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -615,6 +615,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ul-pico-dwarf.dtb \
> imx6ul-pico-hobbit.dtb \
> imx6ul-pico-pi.dtb \
> + imx6ul-phytec-segin-ff-rdk-emmc.dtb \
> imx6ul-phytec-segin-ff-rdk-nand.dtb \
> imx6ul-tx6ul-0010.dtb \
> imx6ul-tx6ul-0011.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
> new file mode 100644
> index 000000000000..934c05fad615
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (C) 2020 PHYTEC Messtechnik GmbH
> + * Author: Yunus Bas <y.bas@phytec.de>
> + */
> +
> +/dts-v1/;
> +#include "imx6ul.dtsi"
> +#include "imx6ul-phytec-phycore-som.dtsi"
> +#include "imx6ul-phytec-segin.dtsi"
> +#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
> +
> +/ {
> + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
> + compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10",
> + "phytec,imx6ul-pcl063","fsl,imx6ul";
> +};
> +
> +&adc1 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&tlv320 {
> + status = "okay";
> +};
It breaks the alphabetic order.
Shawn
> +
> +&ecspi3 {
> + status = "okay";
> +};
> +
> +ðphy1 {
> + status = "okay";
> +};
> +
> +ðphy2 {
> + status = "okay";
> +};
> +
> +&fec1 {
> + status = "okay";
> +};
> +
> +&fec2 {
> + status = "okay";
> +};
> +
> +&i2c_rtc {
> + status = "okay";
> +};
> +
> +®_can1_en {
> + status = "okay";
> +};
> +
> +®_sound_1v8 {
> + status = "okay";
> +};
> +
> +®_sound_3v3 {
> + status = "okay";
> +};
> +
> +&sai2 {
> + status = "okay";
> +};
> +
> +&sound {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + status = "okay";
> +};
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
` (5 preceding siblings ...)
2020-10-27 14:17 ` [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmüller
@ 2020-10-28 8:48 ` Shawn Guo
6 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2020-10-28 8:48 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer, Fabio Estevam
On Tue, Sep 22, 2020 at 11:23:08AM +0200, Stefan Riedmueller wrote:
> The touchscreen subnode name needs to be stmpe_touchscreen as mentioned
> in the dt-bindings.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible
2020-09-22 9:23 ` [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible Stefan Riedmueller
@ 2020-10-28 8:48 ` Shawn Guo
0 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2020-10-28 8:48 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer, Fabio Estevam
On Tue, Sep 22, 2020 at 11:23:09AM +0200, Stefan Riedmueller wrote:
> Set the correct EEPROM compatible for phyCORE-i.MX 6 and phyFLEX-i.MX 6,
> as stated in the device tree bindings.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize
2020-09-22 9:23 ` [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize Stefan Riedmueller
@ 2020-10-28 8:50 ` Shawn Guo
0 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2020-10-28 8:50 UTC (permalink / raw)
To: Stefan Riedmueller
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer, Fabio Estevam
On Tue, Sep 22, 2020 at 11:23:10AM +0200, Stefan Riedmueller wrote:
> Defining the EEPROM pagesize can increase the write speed significantly.
> Set it to the pagesize stated in the EEPROM's datasheet for
> phyCORE-i.MX 6UL, phyCORE-i.MX 6 and phyFLEX-i.MX 6.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
2020-10-28 8:46 ` Shawn Guo
@ 2020-10-28 8:55 ` Stefan Riedmüller
0 siblings, 0 replies; 12+ messages in thread
From: Stefan Riedmüller @ 2020-10-28 8:55 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, devicetree, linux-arm-kernel, Sascha Hauer,
Fabio Estevam, Yunus Bas
Hi Shawn,
On 28.10.20 09:46, Shawn Guo wrote:
> On Tue, Sep 22, 2020 at 11:23:11AM +0200, Stefan Riedmueller wrote:
>> From: Yunus Bas <y.bas@phytec.de>
>>
>> Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
>> eMMC and following features:
>> - i.MX 6UL
>> - 512 MB RAM
>> - eMMC
>> - USB Host/OTG
>> - 2x 100 Mbit/s Ethernet
>> - RS232
>> - CAN
>>
>> Signed-off-by: Yunus Bas <y.bas@phytec.de>
>> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> .../dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 93 +++++++++++++++++++
>> 2 files changed, 94 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 4572db3fa5ae..81ede0707a51 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -615,6 +615,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>> imx6ul-pico-dwarf.dtb \
>> imx6ul-pico-hobbit.dtb \
>> imx6ul-pico-pi.dtb \
>> + imx6ul-phytec-segin-ff-rdk-emmc.dtb \
>> imx6ul-phytec-segin-ff-rdk-nand.dtb \
>> imx6ul-tx6ul-0010.dtb \
>> imx6ul-tx6ul-0011.dtb \
>> diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
>> new file mode 100644
>> index 000000000000..934c05fad615
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
>> @@ -0,0 +1,93 @@
>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
>> +/*
>> + * Copyright (C) 2020 PHYTEC Messtechnik GmbH
>> + * Author: Yunus Bas <y.bas@phytec.de>
>> + */
>> +
>> +/dts-v1/;
>> +#include "imx6ul.dtsi"
>> +#include "imx6ul-phytec-phycore-som.dtsi"
>> +#include "imx6ul-phytec-segin.dtsi"
>> +#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
>> +
>> +/ {
>> + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC";
>> + compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10",
>> + "phytec,imx6ul-pcl063","fsl,imx6ul";
>> +};
>> +
>> +&adc1 {
>> + status = "okay";
>> +};
>> +
>> +&can1 {
>> + status = "okay";
>> +};
>> +
>> +&tlv320 {
>> + status = "okay";
>> +};
>
> It breaks the alphabetic order.
Ah sorry, I missed that. I'll send a v2.
Thanks,
Stefan
>
> Shawn
>
>> +
>> +&ecspi3 {
>> + status = "okay";
>> +};
>> +
>> +ðphy1 {
>> + status = "okay";
>> +};
>> +
>> +ðphy2 {
>> + status = "okay";
>> +};
>> +
>> +&fec1 {
>> + status = "okay";
>> +};
>> +
>> +&fec2 {
>> + status = "okay";
>> +};
>> +
>> +&i2c_rtc {
>> + status = "okay";
>> +};
>> +
>> +®_can1_en {
>> + status = "okay";
>> +};
>> +
>> +®_sound_1v8 {
>> + status = "okay";
>> +};
>> +
>> +®_sound_3v3 {
>> + status = "okay";
>> +};
>> +
>> +&sai2 {
>> + status = "okay";
>> +};
>> +
>> +&sound {
>> + status = "okay";
>> +};
>> +
>> +&uart5 {
>> + status = "okay";
>> +};
>> +
>> +&usbotg1 {
>> + status = "okay";
>> +};
>> +
>> +&usbotg2 {
>> + status = "okay";
>> +};
>> +
>> +&usdhc1 {
>> + status = "okay";
>> +};
>> +
>> +&usdhc2 {
>> + status = "okay";
>> +};
>> --
>> 2.25.1
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-10-29 1:01 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-22 9:23 [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 2/6] ARM: dts: imx6: phytec: Set correct eeprom compatible Stefan Riedmueller
2020-10-28 8:48 ` Shawn Guo
2020-09-22 9:23 ` [PATCH 3/6] ARM: dts: imx6: phytec: Add eeprom pagesize Stefan Riedmueller
2020-10-28 8:50 ` Shawn Guo
2020-09-22 9:23 ` [PATCH 4/6] ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL Stefan Riedmueller
2020-10-28 8:46 ` Shawn Guo
2020-10-28 8:55 ` Stefan Riedmüller
2020-09-22 9:23 ` [PATCH 5/6] ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter Stefan Riedmueller
2020-09-22 9:23 ` [PATCH 6/6] ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source Stefan Riedmueller
2020-10-27 14:17 ` [PATCH 1/6] ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name Stefan Riedmüller
2020-10-28 8:48 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).