* [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards
@ 2020-10-07 13:30 Marco Felsch
2020-10-07 13:30 ` [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki Marco Felsch
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Marco Felsch @ 2020-10-07 13:30 UTC (permalink / raw)
To: robh+dt, shawnguo, festevam, linux-imx, m.podolszki; +Cc: devicetree, kernel
Add bindings for the Phytec PhyBOARD-Nunki evalboards.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Hi,
I copied the imx6q-phytec-nunki-rdk-nand.dts and
imx6qdl-phytec-nunki.dtsi from the phytec downstream kernel repo and
added support for the imx6qp-phytec-nunki-rdk-nand.dts.
@Phytec
I adapted the "phytec,imx6q-pbac11-nand" to "phytec,imx6qp-pbac11-nand"
and "phytec,imx6q-pbac11" to "phytec,imx6qp-pbac11". Can you verify that
since I have no knowledge about the internal naming scheme, thanks.
Regards,
Marco
Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 6da9d734cdb7..26410a42c411 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -156,6 +156,13 @@ properties:
- const: gw,ventana
- const: fsl,imx6q
+ - description: i.MX6Q Phytec PhyBOARD-Nunki Board
+ items:
+ - const: phytec,imx6q-pbac11-nand
+ - const: phytec,imx6q-pbac11
+ - const: phytec,imx6qdl-pcm058
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -163,6 +170,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
+ - description: i.MX6QP Phytec PhyBOARD-Nunki Board
+ items:
+ - const: phytec,imx6qp-pbac11-nand
+ - const: phytec,imx6qp-pbac11
+ - const: phytec,imx6qdl-pcm058
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
--
2.20.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki
2020-10-07 13:30 [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
@ 2020-10-07 13:30 ` Marco Felsch
2020-10-07 13:35 ` Marco Felsch
2020-10-07 13:34 ` [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
2020-10-07 16:10 ` Rob Herring
2 siblings, 1 reply; 7+ messages in thread
From: Marco Felsch @ 2020-10-07 13:30 UTC (permalink / raw)
To: robh+dt, shawnguo, festevam, linux-imx, m.podolszki; +Cc: devicetree, kernel
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the PHYTEC phyBOARD-Nunki which is a
baseboard for the phyCORE-i.MX 6 especially designed for image
processing purposes. At this point it only supports the phyCORE-i.MX
6Quad and 6QuadPlus.
Features are:
- phyCORE-i.MX 6Quad/QuadPlus
- LVDS display
- HDMI
- GBit Ethernet
- USB Host
- USB OTG
- SATA
- PCIe
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
[m.felsch@pengutronix.de: squashed downstream commits:
ARM: dts: imx6: nunki: Add support for phytec cameras
ARM: dts: imx6qdl: nunki: Fix wrong pin settings
ARM: dts: imx6qdl: nunki: Enable pcie regulator active low
ARM: dts: imx6qdl: nunki: Remove enable-active-low property
ARM: dts: imx6qdl: nunki: Add muxing for camera strobe and trigger
ARM: dts: imx6qdl: nunki: fix rtc compatible
ARM: dts: imx6: nunki: Move optional camera bindings to separate dtsi]
[m.felsch@pengutronix.de:
- remove downstream camera and display .dtsi files
- reorder phandles
- adapt commit message to reflect new state
- move stdout-path to nunki.dtsi since it is the only possible debug
uart
- fix pwm-cells for backlight (new default is 3)
- remove not upstream available ti,scan921226h deserializers
- fix a few style issues (compatible first and so on)
- drop unecessary status lines
- keep ldb disabled
- move iomux node to the end]
[m.felsch@pengutronix.de:
- add support for phyCORE-i.MX 6QuadPlus]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm/boot/dts/Makefile | 2 +
.../boot/dts/imx6q-phytec-nunki-rdk-nand.dts | 72 ++++
arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi | 361 ++++++++++++++++++
.../boot/dts/imx6qp-phytec-nunki-rdk-nand.dts | 71 ++++
4 files changed, 506 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..f55a043c0063 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -539,6 +539,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-novena.dtb \
imx6q-phytec-mira-rdk-emmc.dtb \
imx6q-phytec-mira-rdk-nand.dtb \
+ imx6q-phytec-nunki-rdk-nand.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-pico-dwarf.dtb \
imx6q-pico-hobbit.dtb \
@@ -575,6 +576,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-phytec-mira-rdk-nand.dtb \
+ imx6qp-phytec-nunki-rdk-nand.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
imx6qp-tx6qp-8037.dtb \
diff --git a/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
new file mode 100644
index 000000000000..3072f8e40a9e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Martin Podolszki <m.podolszki@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-nunki.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Nunki Quad Carrier-Board with NAND";
+ compatible = "phytec,imx6q-pbac11-nand", "phytec,imx6q-pbac11",
+ "phytec,imx6qdl-pcm058", "fsl,imx6q";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
new file mode 100644
index 000000000000..1e2d00c281f7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Martin Podolszki <m.podolszki@phytec.de>
+ */
+
+#include <dt-bindings/leds/leds-pca9532.h>
+
+/ {
+ aliases {
+ rtc0 = &i2c_rtc;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_lcd_3v3>;
+ pwms = <&pwm1 0 5000000 0>;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ panel {
+ compatible = "auo,g104sn02";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_en>;
+ power-supply = <®_panel>;
+ enable-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_flexcan1: regulator-flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "flexcan1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ reg_en_switch: regulator-en-switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_en_switch>;
+ compatible = "regulator-fixed";
+ regulator-name = "Enable Switch";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ enable-active-high;
+ };
+
+ reg_panel: regulator-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-power-supply";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ reg_pcie: regulator-pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reg>;
+ compatible = "regulator-fixed";
+ regulator-name = "mPCIe_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usbotg_vbus: regulator-usbotg-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_flexcan1>;
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmicec>;
+ ddc-i2c-bus = <&i2c2>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+
+ stmpe: touchctrl@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupts = <12 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpio7>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+
+ pca9533: leddimmer@62 {
+ compatible = "nxp,pca9533";
+ reg = <0x62>;
+
+ led-red {
+ label = "red:user1";
+ type = <PCA9532_TYPE_LED>;
+ linux,default-trigger = "none";
+ };
+
+ led-green {
+ label = "green:user2";
+ type = <PCA9532_TYPE_LED>;
+ linux,default-trigger = "none";
+ };
+
+ led-blue {
+ label = "blue:user3";
+ type = <PCA9532_TYPE_LED>;
+ linux,default-trigger = "mmc0";
+ default-state = "on";
+ };
+ };
+
+ i2c_rtc: rtc@68 {
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_int>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+};
+
+&ldb {
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ vpcie-supply = <®_pcie>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ disable-over-current;
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ vbus-supply = <®_usbotg_vbus>;
+ disable-over-current;
+ dr_mode = "otg";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+};
+
+&iomuxc {
+ pinctrl_en_switch: enswitchgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b008
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1_en: flexcan1engrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0xb0b1
+ >;
+ };
+
+ pinctrl_hdmicec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_panel_en: panelengrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0xb0b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1
+ >;
+ };
+
+ pinctrl_pcie_reg: pcievgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0xb0b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpe {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b088
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0xb0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x1b010
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x1b011
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x1b008
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x1b008
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x1b008
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x1b008
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
new file mode 100644
index 000000000000..fdca59807cb0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2020 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-nunki.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Nunki QuadPlus Carrier-Board with NAND";
+ compatible = "phytec,imx6qp-pbac11-nand", "phytec,imx6qp-pbac11",
+ "phytec,imx6qdl-pcm058", "fsl,imx6qp";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&m25p80 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
--
2.20.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards
2020-10-07 13:30 [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
2020-10-07 13:30 ` [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki Marco Felsch
@ 2020-10-07 13:34 ` Marco Felsch
2020-10-14 7:07 ` Stefan Riedmüller
2020-10-07 16:10 ` Rob Herring
2 siblings, 1 reply; 7+ messages in thread
From: Marco Felsch @ 2020-10-07 13:34 UTC (permalink / raw)
To: robh+dt, shawnguo, festevam, linux-imx, m.podolszki
Cc: devicetree, kernel, s.riedmueller, c.hemp, j.remmet
Add missing Phytec developers to Cc.
Regards,
Marco
On 20-10-07 15:30, Marco Felsch wrote:
> Add bindings for the Phytec PhyBOARD-Nunki evalboards.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Hi,
>
> I copied the imx6q-phytec-nunki-rdk-nand.dts and
> imx6qdl-phytec-nunki.dtsi from the phytec downstream kernel repo and
> added support for the imx6qp-phytec-nunki-rdk-nand.dts.
>
> @Phytec
> I adapted the "phytec,imx6q-pbac11-nand" to "phytec,imx6qp-pbac11-nand"
> and "phytec,imx6q-pbac11" to "phytec,imx6qp-pbac11". Can you verify that
> since I have no knowledge about the internal naming scheme, thanks.
>
> Regards,
> Marco
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 6da9d734cdb7..26410a42c411 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -156,6 +156,13 @@ properties:
> - const: gw,ventana
> - const: fsl,imx6q
>
> + - description: i.MX6Q Phytec PhyBOARD-Nunki Board
> + items:
> + - const: phytec,imx6q-pbac11-nand
> + - const: phytec,imx6q-pbac11
> + - const: phytec,imx6qdl-pcm058
> + - const: fsl,imx6q
> +
> - description: i.MX6QP based Boards
> items:
> - enum:
> @@ -163,6 +170,13 @@ properties:
> - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
> - const: fsl,imx6qp
>
> + - description: i.MX6QP Phytec PhyBOARD-Nunki Board
> + items:
> + - const: phytec,imx6qp-pbac11-nand
> + - const: phytec,imx6qp-pbac11
> + - const: phytec,imx6qdl-pcm058
> + - const: fsl,imx6qp
> +
> - description: i.MX6DL based Boards
> items:
> - enum:
> --
> 2.20.1
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki
2020-10-07 13:30 ` [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki Marco Felsch
@ 2020-10-07 13:35 ` Marco Felsch
2020-10-14 7:07 ` Stefan Riedmüller
0 siblings, 1 reply; 7+ messages in thread
From: Marco Felsch @ 2020-10-07 13:35 UTC (permalink / raw)
To: robh+dt, shawnguo, festevam, linux-imx, m.podolszki
Cc: devicetree, kernel, s.riedmueller, c.hemp, j.remmet
Add missing Phytec developers to Cc.
Regards,
Marco
On 20-10-07 15:30, Marco Felsch wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
>
> This patch adds support for the PHYTEC phyBOARD-Nunki which is a
> baseboard for the phyCORE-i.MX 6 especially designed for image
> processing purposes. At this point it only supports the phyCORE-i.MX
> 6Quad and 6QuadPlus.
>
> Features are:
> - phyCORE-i.MX 6Quad/QuadPlus
> - LVDS display
> - HDMI
> - GBit Ethernet
> - USB Host
> - USB OTG
> - SATA
> - PCIe
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Christian Hemp <c.hemp@phytec.de>
> Signed-off-by: Jan Remmet <j.remmet@phytec.de>
> [m.felsch@pengutronix.de: squashed downstream commits:
> ARM: dts: imx6: nunki: Add support for phytec cameras
> ARM: dts: imx6qdl: nunki: Fix wrong pin settings
> ARM: dts: imx6qdl: nunki: Enable pcie regulator active low
> ARM: dts: imx6qdl: nunki: Remove enable-active-low property
> ARM: dts: imx6qdl: nunki: Add muxing for camera strobe and trigger
> ARM: dts: imx6qdl: nunki: fix rtc compatible
> ARM: dts: imx6: nunki: Move optional camera bindings to separate dtsi]
> [m.felsch@pengutronix.de:
> - remove downstream camera and display .dtsi files
> - reorder phandles
> - adapt commit message to reflect new state
> - move stdout-path to nunki.dtsi since it is the only possible debug
> uart
> - fix pwm-cells for backlight (new default is 3)
> - remove not upstream available ti,scan921226h deserializers
> - fix a few style issues (compatible first and so on)
> - drop unecessary status lines
> - keep ldb disabled
> - move iomux node to the end]
> [m.felsch@pengutronix.de:
> - add support for phyCORE-i.MX 6QuadPlus]
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> .../boot/dts/imx6q-phytec-nunki-rdk-nand.dts | 72 ++++
> arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi | 361 ++++++++++++++++++
> .../boot/dts/imx6qp-phytec-nunki-rdk-nand.dts | 71 ++++
> 4 files changed, 506 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
> create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
> create mode 100644 arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..f55a043c0063 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -539,6 +539,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-novena.dtb \
> imx6q-phytec-mira-rdk-emmc.dtb \
> imx6q-phytec-mira-rdk-nand.dtb \
> + imx6q-phytec-nunki-rdk-nand.dtb \
> imx6q-phytec-pbab01.dtb \
> imx6q-pico-dwarf.dtb \
> imx6q-pico-hobbit.dtb \
> @@ -575,6 +576,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6qp-nitrogen6_max.dtb \
> imx6qp-nitrogen6_som2.dtb \
> imx6qp-phytec-mira-rdk-nand.dtb \
> + imx6qp-phytec-nunki-rdk-nand.dtb \
> imx6qp-sabreauto.dtb \
> imx6qp-sabresd.dtb \
> imx6qp-tx6qp-8037.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
> new file mode 100644
> index 000000000000..3072f8e40a9e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-phytec-nunki-rdk-nand.dts
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
> + * Author: Martin Podolszki <m.podolszki@phytec.de>
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-phytec-phycore-som.dtsi"
> +#include "imx6qdl-phytec-nunki.dtsi"
> +
> +/ {
> + model = "PHYTEC phyBOARD-Nunki Quad Carrier-Board with NAND";
> + compatible = "phytec,imx6q-pbac11-nand", "phytec,imx6q-pbac11",
> + "phytec,imx6qdl-pcm058", "fsl,imx6q";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&fec {
> + status = "okay";
> +};
> +
> +&gpmi {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&m25p80 {
> + status = "okay";
> +};
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "okay";
> +};
> +
> +&usbotg {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
> new file mode 100644
> index 000000000000..1e2d00c281f7
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-nunki.dtsi
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
> + * Author: Martin Podolszki <m.podolszki@phytec.de>
> + */
> +
> +#include <dt-bindings/leds/leds-pca9532.h>
> +
> +/ {
> + aliases {
> + rtc0 = &i2c_rtc;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <7>;
> + power-supply = <®_lcd_3v3>;
> + pwms = <&pwm1 0 5000000 0>;
> + };
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + panel {
> + compatible = "auo,g104sn02";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_en>;
> + power-supply = <®_panel>;
> + enable-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +
> + reg_flexcan1: regulator-flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1_en>;
> + compatible = "regulator-fixed";
> + regulator-name = "flexcan1";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_lcd_3v3: regulator-lcd-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + };
> +
> + reg_en_switch: regulator-en-switch {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_en_switch>;
> + compatible = "regulator-fixed";
> + regulator-name = "Enable Switch";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> + regulator-always-on;
> + enable-active-high;
> + };
> +
> + reg_panel: regulator-panel {
> + compatible = "regulator-fixed";
> + regulator-name = "panel-power-supply";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + regulator-always-on;
> + };
> +
> + reg_pcie: regulator-pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie_reg>;
> + compatible = "regulator-fixed";
> + regulator-name = "mPCIe_1V5";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reg_usbotg_vbus: regulator-usbotg-vbus {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg_vbus>;
> + compatible = "regulator-fixed";
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + xceiver-supply = <®_flexcan1>;
> +};
> +
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmicec>;
> + ddc-i2c-bus = <&i2c2>;
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + clock-frequency = <100000>;
> +
> + stmpe: touchctrl@44 {
> + compatible = "st,stmpe811";
> + reg = <0x44>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_stmpe>;
> + interrupts = <12 IRQ_TYPE_NONE>;
> + interrupt-parent = <&gpio7>;
> +
> + stmpe_touchscreen {
> + compatible = "st,stmpe-ts";
> + st,sample-time = <4>;
> + st,mod-12b = <1>;
> + st,ref-sel = <0>;
> + st,adc-freq = <1>;
> + st,ave-ctrl = <1>;
> + st,touch-det-delay = <2>;
> + st,settling = <2>;
> + st,fraction-z = <7>;
> + st,i-drive = <1>;
> + };
> + };
> +
> + pca9533: leddimmer@62 {
> + compatible = "nxp,pca9533";
> + reg = <0x62>;
> +
> + led-red {
> + label = "red:user1";
> + type = <PCA9532_TYPE_LED>;
> + linux,default-trigger = "none";
> + };
> +
> + led-green {
> + label = "green:user2";
> + type = <PCA9532_TYPE_LED>;
> + linux,default-trigger = "none";
> + };
> +
> + led-blue {
> + label = "blue:user3";
> + type = <PCA9532_TYPE_LED>;
> + linux,default-trigger = "mmc0";
> + default-state = "on";
> + };
> + };
> +
> + i2c_rtc: rtc@68 {
> + compatible = "microcrystal,rv4162";
> + reg = <0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rtc_int>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + clock-frequency = <100000>;
> +};
> +
> +&ldb {
> + lvds-channel@0 {
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <18>;
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + reset-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
> + vpcie-supply = <®_pcie>;
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + fsl,uart-has-rtscts;
> +};
> +
> +&usbh1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbh1>;
> + disable-over-current;
> +};
> +
> +&usbotg {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + vbus-supply = <®_usbotg_vbus>;
> + disable-over-current;
> + dr_mode = "otg";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
> + no-1-8-v;
> +};
> +
> +&iomuxc {
> + pinctrl_en_switch: enswitchgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b008
> + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
> + >;
> + };
> +
> + pinctrl_flexcan1_en: flexcan1engrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0xb0b1
> + >;
> + };
> +
> + pinctrl_hdmicec: hdmicecgrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_panel_en: panelengrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0xb0b1
> + >;
> + };
> +
> + pinctrl_pcie: pciegrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1
> + >;
> + };
> +
> + pinctrl_pcie_reg: pcievgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0xb0b1
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_rtc_int: rtcintgrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
> + >;
> + };
> +
> + pinctrl_stmpe: stmpe {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b088
> + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbh1: usbh1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0xb0b1
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> + >;
> + };
> +
> + pinctrl_usbotg_vbus: usbotg-vbusgrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x1b010
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x1b011
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x1b008
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x1b008
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x1b008
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x1b008
> + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
> new file mode 100644
> index 000000000000..fdca59807cb0
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qp-phytec-nunki-rdk-nand.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +/*
> + * Copyright (C) 2020 Pengutronix, Marco Felsch <kernel@pengutronix.de>
> + */
> +
> +/dts-v1/;
> +#include "imx6qp.dtsi"
> +#include "imx6qdl-phytec-phycore-som.dtsi"
> +#include "imx6qdl-phytec-nunki.dtsi"
> +
> +/ {
> + model = "PHYTEC phyBOARD-Nunki QuadPlus Carrier-Board with NAND";
> + compatible = "phytec,imx6qp-pbac11-nand", "phytec,imx6qp-pbac11",
> + "phytec,imx6qdl-pcm058", "fsl,imx6qp";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&fec {
> + status = "okay";
> +};
> +
> +&gpmi {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&m25p80 {
> + status = "okay";
> +};
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "okay";
> +};
> +
> +&usbotg {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + status = "okay";
> +};
> --
> 2.20.1
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards
2020-10-07 13:30 [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
2020-10-07 13:30 ` [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki Marco Felsch
2020-10-07 13:34 ` [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
@ 2020-10-07 16:10 ` Rob Herring
2 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2020-10-07 16:10 UTC (permalink / raw)
To: Marco Felsch
Cc: linux-imx, festevam, devicetree, robh+dt, m.podolszki, kernel, shawnguo
On Wed, 07 Oct 2020 15:30:36 +0200, Marco Felsch wrote:
> Add bindings for the Phytec PhyBOARD-Nunki evalboards.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Hi,
>
> I copied the imx6q-phytec-nunki-rdk-nand.dts and
> imx6qdl-phytec-nunki.dtsi from the phytec downstream kernel repo and
> added support for the imx6qp-phytec-nunki-rdk-nand.dts.
>
> @Phytec
> I adapted the "phytec,imx6q-pbac11-nand" to "phytec,imx6qp-pbac11-nand"
> and "phytec,imx6q-pbac11" to "phytec,imx6qp-pbac11". Can you verify that
> since I have no knowledge about the internal naming scheme, thanks.
>
> Regards,
> Marco
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki
2020-10-07 13:35 ` Marco Felsch
@ 2020-10-14 7:07 ` Stefan Riedmüller
0 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmüller @ 2020-10-14 7:07 UTC (permalink / raw)
To: Marco Felsch, robh+dt, shawnguo
Cc: festevam, linux-imx, m.podolszki, devicetree, kernel, c.hemp, j.remmet
Hi Marco,
thanks for the patches.
On 07.10.20 15:35, Marco Felsch wrote:
> Add missing Phytec developers to Cc.
>
> Regards,
> Marco
>
> On 20-10-07 15:30, Marco Felsch wrote:
>> From: Stefan Riedmueller<s.riedmueller@phytec.de>
>>
>> This patch adds support for the PHYTEC phyBOARD-Nunki which is a
>> baseboard for the phyCORE-i.MX 6 especially designed for image
>> processing purposes. At this point it only supports the phyCORE-i.MX
>> 6Quad and 6QuadPlus.
>>
>> Features are:
>> - phyCORE-i.MX 6Quad/QuadPlus
>> - LVDS display
>> - HDMI
>> - GBit Ethernet
>> - USB Host
>> - USB OTG
>> - SATA
>> - PCIe
>>
>> Signed-off-by: Stefan Riedmueller<s.riedmueller@phytec.de>
>> Signed-off-by: Christian Hemp<c.hemp@phytec.de>
>> Signed-off-by: Jan Remmet<j.remmet@phytec.de>
>> [m.felsch@pengutronix.de: squashed downstream commits:
>> ARM: dts: imx6: nunki: Add support for phytec cameras
>> ARM: dts: imx6qdl: nunki: Fix wrong pin settings
>> ARM: dts: imx6qdl: nunki: Enable pcie regulator active low
>> ARM: dts: imx6qdl: nunki: Remove enable-active-low property
>> ARM: dts: imx6qdl: nunki: Add muxing for camera strobe and trigger
>> ARM: dts: imx6qdl: nunki: fix rtc compatible
>> ARM: dts: imx6: nunki: Move optional camera bindings to separate dtsi]
>> [m.felsch@pengutronix.de:
>> - remove downstream camera and display .dtsi files
>> - reorder phandles
>> - adapt commit message to reflect new state
>> - move stdout-path to nunki.dtsi since it is the only possible debug
>> uart
>> - fix pwm-cells for backlight (new default is 3)
>> - remove not upstream available ti,scan921226h deserializers
>> - fix a few style issues (compatible first and so on)
>> - drop unecessary status lines
>> - keep ldb disabled
>> - move iomux node to the end]
>> [m.felsch@pengutronix.de:
>> - add support for phyCORE-i.MX 6QuadPlus]
>> Signed-off-by: Marco Felsch<m.felsch@pengutronix.de>
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Stefan
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards
2020-10-07 13:34 ` [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
@ 2020-10-14 7:07 ` Stefan Riedmüller
0 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmüller @ 2020-10-14 7:07 UTC (permalink / raw)
To: Marco Felsch, robh+dt, shawnguo
Cc: festevam, linux-imx, m.podolszki, devicetree, kernel, c.hemp, j.remmet
Hi Marco,
On 07.10.20 15:34, Marco Felsch wrote:
> Add missing Phytec developers to Cc.
>
> Regards,
> Marco
>
> On 20-10-07 15:30, Marco Felsch wrote:
>> Add bindings for the Phytec PhyBOARD-Nunki evalboards.
>>
>> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
>> ---
>> Hi,
>>
>> I copied the imx6q-phytec-nunki-rdk-nand.dts and
>> imx6qdl-phytec-nunki.dtsi from the phytec downstream kernel repo and
>> added support for the imx6qp-phytec-nunki-rdk-nand.dts.
>>
>> @Phytec
>> I adapted the "phytec,imx6q-pbac11-nand" to "phytec,imx6qp-pbac11-nand"
>> and "phytec,imx6q-pbac11" to "phytec,imx6qp-pbac11". Can you verify that
>> since I have no knowledge about the internal naming scheme, thanks.
Yes, that is correct.
>>
>> Regards,
>> Marco
>>
>> Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
>> index 6da9d734cdb7..26410a42c411 100644
>> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
>> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
>> @@ -156,6 +156,13 @@ properties:
>> - const: gw,ventana
>> - const: fsl,imx6q
>>
>> + - description: i.MX6Q Phytec PhyBOARD-Nunki Board
Please use all caps for PHYTEC and start phyBOARD with a lower case p.
>> + items:
>> + - const: phytec,imx6q-pbac11-nand
>> + - const: phytec,imx6q-pbac11
>> + - const: phytec,imx6qdl-pcm058
>> + - const: fsl,imx6q
>> +
>> - description: i.MX6QP based Boards
>> items:
>> - enum:
>> @@ -163,6 +170,13 @@ properties:
>> - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
>> - const: fsl,imx6qp
>>
>> + - description: i.MX6QP Phytec PhyBOARD-Nunki Board
Same here.
With these changes you can add my
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Thanks,
Stefan
>> + items:
>> + - const: phytec,imx6qp-pbac11-nand
>> + - const: phytec,imx6qp-pbac11
>> + - const: phytec,imx6qdl-pcm058
>> + - const: fsl,imx6qp
>> +
>> - description: i.MX6DL based Boards
>> items:
>> - enum:
>> --
>> 2.20.1
>>
>>
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-10-14 7:07 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-07 13:30 [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
2020-10-07 13:30 ` [PATCH 2/2] ARM: dts: imx6: Add support for phyBOARD-Nunki Marco Felsch
2020-10-07 13:35 ` Marco Felsch
2020-10-14 7:07 ` Stefan Riedmüller
2020-10-07 13:34 ` [PATCH 1/2] dt-bindings: arm: fsl: add Phytec Nunki boards Marco Felsch
2020-10-14 7:07 ` Stefan Riedmüller
2020-10-07 16:10 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).