* [PATCH AUTOSEL 5.9 102/147] ARC: [dts] fix the errors detected by dtbs_check
[not found] <20201026234905.1022767-1-sashal@kernel.org>
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 129/147] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes Sasha Levin
` (8 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zhen Lei, Vineet Gupta, Sasha Levin, devicetree, linux-snps-arc
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 05b1be68c4d6d76970025e6139bfd735c2256ee5 ]
xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \
'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml
The node name of the interrupt controller must start with
"interrupt-controller" instead of "dw-apb-ictl".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arc/boot/dts/axc001.dtsi | 2 +-
arch/arc/boot/dts/axc003.dtsi | 2 +-
arch/arc/boot/dts/axc003_idu.dtsi | 2 +-
arch/arc/boot/dts/vdk_axc003.dtsi | 2 +-
arch/arc/boot/dts/vdk_axc003_idu.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 79ec27c043c1d..2a151607b0805 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -91,7 +91,7 @@ arcpct0: pct {
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@e0012000 {
+ mb_intc: interrupt-controller@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index ac8e1b463a709..cd1edcf4f95ef 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -129,7 +129,7 @@ mmc@15000 {
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@e0012000 {
+ mb_intc: interrupt-controller@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 9da21e7fd246f..70779386ca796 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -135,7 +135,7 @@ mmc@15000 {
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@e0012000 {
+ mb_intc: interrupt-controller@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index f8be7ba8dad49..c21d0eb07bf67 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -46,7 +46,7 @@ debug_uart: dw-apb-uart@5000 {
};
- mb_intc: dw-apb-ictl@e0012000 {
+ mb_intc: interrupt-controller@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 0afa3e53a4e39..4d348853ac7c5 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -54,7 +54,7 @@ debug_uart: dw-apb-uart@5000 {
};
- mb_intc: dw-apb-ictl@e0012000 {
+ mb_intc: interrupt-controller@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 129/147] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes
[not found] <20201026234905.1022767-1-sashal@kernel.org>
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 102/147] ARC: [dts] fix the errors detected by dtbs_check Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 130/147] ARM: dts: omap4: Fix sgx clock rate for 4430 Sasha Levin
` (7 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yoshihiro Shimoda, Geert Uytterhoeven, Sasha Levin,
linux-renesas-soc, devicetree
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit 992d7a8b88c83c05664b649fc54501ce58e19132 ]
Add full-pwr-cycle-in-suspend property to do a graceful shutdown of
the eMMC device in system suspend.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594989201-24228-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index ff88af8e39d3f..a2e085db87c53 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -469,6 +469,7 @@ &sdhi2 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
non-removable;
+ full-pwr-cycle-in-suspend;
status = "okay";
};
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 130/147] ARM: dts: omap4: Fix sgx clock rate for 4430
[not found] <20201026234905.1022767-1-sashal@kernel.org>
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 102/147] ARC: [dts] fix the errors detected by dtbs_check Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 129/147] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 133/147] ARM: dts: s5pv210: Enable audio on Aries boards Sasha Levin
` (6 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tony Lindgren, Arthur Demchenkov, Merlijn Wajer,
Sebastian Reichel, Sasha Levin, linux-omap, devicetree
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit 19d3e9a0bdd57b90175f30390edeb06851f5f9f3 ]
We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:
# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000
Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
Looks like also at least duover needs this change to avoid hangs, so
let's apply it for all 4430.
This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/omap4.dtsi | 2 +-
arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 0282b9de3384f..52e8298275050 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -410,7 +410,7 @@ abb_iva: regulator-abb-iva {
status = "disabled";
};
- target-module@56000000 {
+ sgx_module: target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8ed510ab00c52..cb309743de5da 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@ &cpu_thermal {
};
/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 133/147] ARM: dts: s5pv210: Enable audio on Aries boards
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (2 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 130/147] ARM: dts: omap4: Fix sgx clock rate for 4430 Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 134/147] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings Sasha Levin
` (5 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jonathan Bakker, Krzysztof Kozlowski, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Jonathan Bakker <xc-racer2@live.ca>
[ Upstream commit cd972fe90008adf49de0790250c1275480ac5cdc ]
Both the Galaxy S and the Fascinate4G have a WM8994 codec, but they
differ slightly in their jack detection and micbias configuration.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 10 +++
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 98 +++++++++++++++++++++++
arch/arm/boot/dts/s5pv210-galaxys.dts | 85 ++++++++++++++++++++
3 files changed, 193 insertions(+)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 822207f63ee0a..a3f83f668ce14 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -47,6 +47,11 @@ mfc_right: region@51000000 {
};
};
+ bt_codec: bt_sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <0>;
+ };
+
vibrator_pwr: regulator-fixed-0 {
compatible = "regulator-fixed";
regulator-name = "vibrator-en";
@@ -624,6 +629,11 @@ touchscreen@4a {
};
};
+&i2s0 {
+ dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+ status = "okay";
+};
+
&mfc {
memory-region = <&mfc_left>, <&mfc_right>;
};
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 65eed01cfced1..ca064359dd308 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -35,6 +35,80 @@ vol-up {
linux,code = <KEY_VOLUMEUP>;
};
};
+
+ headset_micbias_reg: regulator-fixed-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "Headset_Micbias";
+ gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_micbias_ena>;
+ };
+
+ main_micbias_reg: regulator-fixed-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "Main_Micbias";
+ gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_micbias_ena>;
+ };
+
+ sound {
+ compatible = "samsung,fascinate4g-wm8994";
+
+ model = "Fascinate4G";
+
+ extcon = <&fsa9480>;
+
+ main-micbias-supply = <&main_micbias_reg>;
+ headset-micbias-supply = <&headset_micbias_reg>;
+
+ earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&adc 3>;
+ io-channel-names = "headset-detect";
+ headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
+ headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "Main Mic",
+ "IN1LN", "Main Mic",
+
+ "IN1RP", "Headset Mic",
+ "IN1RN", "Headset Mic",
+
+ "Modem Out", "Modem TX",
+ "Modem RX", "Modem In",
+
+ "Bluetooth SPK", "TX",
+ "RX", "Bluetooth Mic";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_det &earpath_sel>;
+
+ cpu {
+ sound-dai = <&i2s0>, <&bt_codec>;
+ };
+
+ codec {
+ sound-dai = <&wm8994>;
+ };
+ };
};
&fg {
@@ -51,6 +125,12 @@ &pinctrl0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
+ headset_det: headset-det {
+ samsung,pins = "gph0-6", "gph3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
fg_irq: fg-irq {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
@@ -58,6 +138,24 @@ fg_irq: fg-irq {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ headset_micbias_ena: headset-micbias-ena {
+ samsung,pins = "gpj2-5";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ earpath_sel: earpath-sel {
+ samsung,pins = "gpj2-6";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ main_micbias_ena: main-micbias-ena {
+ samsung,pins = "gpj4-2";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
/* Based on vendor kernel v2.6.35.7 */
sleep_cfg: sleep-cfg {
PIN_SLP(gpa0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 5d10dd67eacc5..560f830b6f6be 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -72,6 +72,73 @@ fmradio@10 {
pinctrl-0 = <&fm_irq &fm_rst>;
};
};
+
+ micbias_reg: regulator-fixed-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "MICBIAS";
+ gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&micbias_reg_ena>;
+ };
+
+ sound {
+ compatible = "samsung,aries-wm8994";
+
+ model = "Aries";
+
+ extcon = <&fsa9480>;
+
+ main-micbias-supply = <&micbias_reg>;
+ headset-micbias-supply = <&micbias_reg>;
+
+ earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&adc 3>;
+ io-channel-names = "headset-detect";
+ headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>;
+ headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "Main Mic",
+ "IN1LN", "Main Mic",
+
+ "IN1RP", "Headset Mic",
+ "IN1RN", "Headset Mic",
+
+ "IN2LN", "FM In",
+ "IN2RN", "FM In",
+
+ "Modem Out", "Modem TX",
+ "Modem RX", "Modem In",
+
+ "Bluetooth SPK", "TX",
+ "RX", "Bluetooth Mic";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_det &earpath_sel>;
+
+ cpu {
+ sound-dai = <&i2s0>, <&bt_codec>;
+ };
+
+ codec {
+ sound-dai = <&wm8994>;
+ };
+ };
};
&aliases {
@@ -88,6 +155,12 @@ fm_i2c_pins: fm-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ headset_det: headset-det {
+ samsung,pins = "gph0-6", "gph3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
fm_irq: fm-irq {
samsung,pins = "gpj2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -102,6 +175,12 @@ fm_rst: fm-rst {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ earpath_sel: earpath-sel {
+ samsung,pins = "gpj2-6";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
massmemory_en: massmemory-en {
samsung,pins = "gpj2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -109,6 +188,12 @@ massmemory_en: massmemory-en {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ micbias_reg_ena: micbias-reg-ena {
+ samsung,pins = "gpj4-2";
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
/* Based on CyanogenMod 3.0.101 kernel */
sleep_cfg: sleep-cfg {
PIN_SLP(gpa0-0, PREV, NONE);
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 134/147] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (3 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 133/147] ARM: dts: s5pv210: Enable audio on Aries boards Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 135/147] ARM: dts: s5pv210: move fixed clocks under root node Sasha Levin
` (4 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
1 file changed, 21 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 1b0ee884e91db..84e4447931de5 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -128,35 +128,28 @@ wakeup-interrupt-controller {
};
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- pdma0: dma@e0900000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0900000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <19>;
- clocks = <&clocks CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: dma@e0900000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0900000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <19>;
+ clocks = <&clocks CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
- pdma1: dma@e0a00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0a00000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <20>;
- clocks = <&clocks CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma1: dma@e0a00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0a00000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <20>;
+ clocks = <&clocks CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
adc: adc@e1700000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 135/147] ARM: dts: s5pv210: move fixed clocks under root node
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (4 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 134/147] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 136/147] ARM: dts: s5pv210: move PMU node out of clock controller Sasha Levin
` (3 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit d38cae370e5f2094cbc38db3082b8e9509ae52ce ]
The fixed clocks are kept under dedicated 'external-clocks' node, thus a
fake 'reg' was added. This is not correct with dtschema as fixed-clock
binding does not have a 'reg' property. Moving fixed clocks out of
'soc' to root node fixes multiple dtbs_check warnings:
external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
external-clocks: #size-cells:0:0: 0 is not one of [1, 2]
external-clocks: oscillator@0:reg:0: [0] is too short
external-clocks: oscillator@1:reg:0: [1] is too short
external-clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 36 +++++++++++++---------------------
1 file changed, 14 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 84e4447931de5..5c760a6d79557 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@ cpu@0 {
};
};
+ xxti: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xxti";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xusbxti";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- external-clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xxti: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- clock-output-names = "xxti";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- clock-output-names = "xusbxti";
- #clock-cells = <0>;
- };
- };
-
onenand: onenand@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 136/147] ARM: dts: s5pv210: move PMU node out of clock controller
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (5 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 135/147] ARM: dts: s5pv210: move fixed clocks under root node Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 137/147] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node Sasha Levin
` (2 subsequent siblings)
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit bb98fff84ad1ea321823759edaba573a16fa02bd ]
The Power Management Unit (PMU) is a separate device which has little
common with clock controller. Moving it to one level up (from clock
controller child to SoC) allows to remove fake simple-bus compatible and
dtbs_check warnings like:
clock-controller@e0100000: $nodename:0:
'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 5c760a6d79557..46221a5c8ce59 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -92,19 +92,16 @@ chipid@e0000000 {
};
clocks: clock-controller@e0100000 {
- compatible = "samsung,s5pv210-clock", "simple-bus";
+ compatible = "samsung,s5pv210-clock";
reg = <0xe0100000 0x10000>;
clock-names = "xxti", "xusbxti";
clocks = <&xxti>, <&xusbxti>;
#clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ };
- pmu_syscon: syscon@e0108000 {
- compatible = "samsung-s5pv210-pmu", "syscon";
- reg = <0xe0108000 0x8000>;
- };
+ pmu_syscon: syscon@e0108000 {
+ compatible = "samsung-s5pv210-pmu", "syscon";
+ reg = <0xe0108000 0x8000>;
};
pinctrl0: pinctrl@e0200000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 137/147] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (6 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 136/147] ARM: dts: s5pv210: move PMU node out of clock controller Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 138/147] ARM: dts: s5pv210: add RTC 32 KHz clock in Aries family Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 139/147] ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]
The 'audio-subsystem' node is an artificial creation, not representing
real hardware. The hardware is described by its nodes - AUDSS clock
controller and I2S0.
Remove the 'audio-subsystem' node along with its undocumented compatible
to fix dtbs_check warnings like:
audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
1 file changed, 29 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 46221a5c8ce59..2871351ab9074 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -223,43 +223,36 @@ i2c2: i2c@e1a00000 {
status = "disabled";
};
- audio-subsystem {
- compatible = "samsung,s5pv210-audss", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clk_audss: clock-controller@eee10000 {
- compatible = "samsung,s5pv210-audss-clock";
- reg = <0xeee10000 0x1000>;
- clock-names = "hclk", "xxti",
- "fout_epll",
- "sclk_audio0";
- clocks = <&clocks DOUT_HCLKP>, <&xxti>,
- <&clocks FOUT_EPLL>,
- <&clocks SCLK_AUDIO0>;
- #clock-cells = <1>;
- };
+ clk_audss: clock-controller@eee10000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xeee10000 0x1000>;
+ clock-names = "hclk", "xxti",
+ "fout_epll",
+ "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>,
+ <&clocks SCLK_AUDIO0>;
+ #clock-cells = <1>;
+ };
- i2s0: i2s@eee30000 {
- compatible = "samsung,s5pv210-i2s";
- reg = <0xeee30000 0x1000>;
- interrupt-parent = <&vic2>;
- interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
- clock-names = "iis",
- "i2s_opclk0",
- "i2s_opclk1";
- clocks = <&clk_audss CLK_I2S>,
- <&clk_audss CLK_I2S>,
- <&clk_audss CLK_DOUT_AUD_BUS>;
- samsung,idma-addr = <0xc0010000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
+ i2s0: i2s@eee30000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0xeee30000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <16>;
+ dma-names = "rx", "tx", "tx-sec";
+ dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ clock-names = "iis",
+ "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ samsung,idma-addr = <0xc0010000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
};
i2s1: i2s@e2100000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 138/147] ARM: dts: s5pv210: add RTC 32 KHz clock in Aries family
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (7 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 137/147] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 139/147] ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 086c4498b0cc87fdb09188f3da7056e898814948 ]
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However there is no such clock provider but rather a regulator driver
which registers the clock as a regulator. This is an old driver which
will not be updated so add a workaround - a fixed-clock to fill missing
clock phandle reference in S3C RTC.
This fixes dtbs_check warnings:
rtc@e2800000: clocks: [[2, 145]] is too short
rtc@e2800000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-12-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index a3f83f668ce14..8a98b35b9b0de 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -47,6 +47,13 @@ mfc_right: region@51000000 {
};
};
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
bt_codec: bt_sco {
compatible = "linux,bt-sco";
#sound-dai-cells = <0>;
@@ -825,6 +832,11 @@ &pwm {
samsung,pwm-outputs = <1>;
};
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
&sdhci1 {
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH AUTOSEL 5.9 139/147] ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
[not found] <20201026234905.1022767-1-sashal@kernel.org>
` (8 preceding siblings ...)
2020-10-26 23:48 ` [PATCH AUTOSEL 5.9 138/147] ARM: dts: s5pv210: add RTC 32 KHz clock in Aries family Sasha Levin
@ 2020-10-26 23:48 ` Sasha Levin
9 siblings, 0 replies; 10+ messages in thread
From: Sasha Levin @ 2020-10-26 23:48 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Jonathan Bakker, Sasha Levin, devicetree,
linux-arm-kernel, linux-samsung-soc
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 1ed7f6d0bab2f1794f1eb4ed032e90575552fd21 ]
The device tree schema expects SPI controller to be named "spi",
otherwise dtbs_check complain with a warning like:
spi-gpio-0: $nodename:0: 'spi-gpio-0' does not match '^spi(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-25-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8a98b35b9b0de..3762098233c0c 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -545,7 +545,7 @@ poweroff: syscon-poweroff {
value = <0x5200>;
};
- spi_lcd: spi-gpio-0 {
+ spi_lcd: spi-2 {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread