[PATCH 29/32] riscv: Add SiPeed MAIX GO board device tree

[Damien Le Moal <damien.lemoal@wdc.com>]

Add a device tree for the SiPeed MAIX GO board. This device tree
enables buttons, LEDs, gpio, i2c and spi/mmc SD card devices.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 arch/riscv/boot/dts/kendryte/k210_maix_go.dts | 237 ++++++++++++++++++
 1 file changed, 237 insertions(+)
 create mode 100644 arch/riscv/boot/dts/kendryte/k210_maix_go.dts

diff --git a/arch/riscv/boot/dts/kendryte/k210_maix_go.dts b/arch/riscv/boot/dts/kendryte/k210_maix_go.dts
new file mode 100644
index 000000000000..8254d93a5e82
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210_maix_go.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SiPeed MAIX GO";
+	compatible = "sipeed,maix-go", "kendryte,k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		up {
+			label = "UP";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		press {
+			label = "PRESS";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "DOWN";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&mic>;
+		};
+	};
+
+	mic: mic {
+		#sound-dai-cells = <0>;
+		compatible = "memsensing,msm261s4030h0";
+		status = "disabled";
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&fpioa_jtag>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fpioa_jtag: jtag {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	fpioa_uarths: uarths {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	fpioa_gpio: gpio {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	fpioa_gpiohs: gpiohs {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	fpioa_i2s0: i2s0 {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	fpioa_dvp: dvp {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	fpioa_spi0: spi0 {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	fpioa_spi1: spi1 {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_SPI1_SS0)>; /* cs */
+	};
+
+	fpioa_i2c1: i2c1 {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&fpioa_uarths>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&fpioa_gpiohs>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&fpioa_gpio>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&fpioa_i2s0>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&fpioa_i2c1>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&dvp0 {
+	pinctrl-0 = <&fpioa_dvp>;
+	pinctrl-names = "default";
+};
+
+&spi0 {
+	pinctrl-0 = <&fpioa_spi0>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 0>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&fpioa_spi1>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	polling;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <4000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
-- 
2.28.0