[PATCH v3 0/5] Add GPIO support for MStar/SigmaStar ARMv7

[PATCH v3 0/5] Add GPIO support for MStar/SigmaStar ARMv7

[Daniel Palmer]

At the moment the MStar/SigmaStar support is only really
capable of shell from an initramfs and not much else.

Most of the interesting drivers are blocked on clock and pinctrl
drivers and those are going to take me a little while to get cleaned
up.

Clock and pinctrl aren't needed for basic GPIO to work (all pins
start off as GPIOs..) and it makes it possible to actually do something
so this series adds everything that is needed for the main GPIO
block in these chips.

Changes since v2:

- Numerous style and code cleanups as suggested by Andy Shevchenko,
  Linus Walleij, Marc Zyngier and Rob Herring.

- Pad names moved out of the binding header because they are no longer
  needed there. The pin/pad numbers are still there as I couldn't think
  of a better way to do this. meson8b-gpio.h seems to be similar.

Changes since v1:

- Moves the binding header commit before the yaml commit
  
- Fixes the license on the binding header to include BSD-2-Clause

- The driver has been reworked to use the gpiolib irqchip functionality
  as suggested by Linus[0]. I think I got this right. The gpio controller
  doesn't actually do anything with interrupts itself.. It just happens
  to have 4 lines that are also wired to lines on one of the interrupt
  controllers.

- Now that the driver is an interrupt controller in it's own right for
  the gpio lines that have associated interrupts the binding description
  has been updated to add the interrupt-controller bits and remove the
  description of the interrupt-names that described how the interrupts
  used to be passed in.

Daniel Palmer (5):
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  gpio: msc313: MStar MSC313 GPIO driver
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: mstar: Fill in GPIO controller properties for infinity

 .../bindings/gpio/mstar,msc313-gpio.yaml      |  62 +++
 MAINTAINERS                                   |   3 +
 arch/arm/boot/dts/mstar-infinity.dtsi         |   7 +
 arch/arm/boot/dts/mstar-v7.dtsi               |  10 +
 drivers/gpio/Kconfig                          |  11 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-msc313.c                    | 460 ++++++++++++++++++
 include/dt-bindings/gpio/msc313-gpio.h        |  53 ++
 8 files changed, 607 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
 create mode 100644 drivers/gpio/gpio-msc313.c
 create mode 100644 include/dt-bindings/gpio/msc313-gpio.h

-- 
2.29.2

[PATCH v3 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver

[Daniel Palmer]

Header adds defines for the gpio number of each pad from the driver view.

The gpio block seems to have enough registers for 128 lines but what line
is mapped to a physical pin depends on the chip. The gpio block also seems
to contain some registers that are not related to gpio but needed somewhere
to go.

Because of the above the driver itself uses the index of a pin's offset in
an array of the possible offsets for a chip as the gpio number.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 MAINTAINERS                            |  1 +
 include/dt-bindings/gpio/msc313-gpio.h | 53 ++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 include/dt-bindings/gpio/msc313-gpio.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 3da6d8c154e4..db9c008a0395 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2133,6 +2133,7 @@ W:	http://linux-chenxing.org/
 F:	Documentation/devicetree/bindings/arm/mstar/*
 F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
+F:	include/dt-bindings/gpio/msc313-gpio.h
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h
new file mode 100644
index 000000000000..2dd56683d3c1
--- /dev/null
+++ b/include/dt-bindings/gpio/msc313-gpio.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * GPIO definitions for MStar/SigmaStar MSC313 and later SoCs
+ *
+ * Copyright (C) 2020 Daniel Palmer <daniel@thingy.jp>
+ */
+
+#ifndef _DT_BINDINGS_MSC313_GPIO_H
+#define _DT_BINDINGS_MSC313_GPIO_H
+
+#define MSC313_GPIO_FUART	0
+#define MSC313_GPIO_FUART_RX	(MSC313_GPIO_FUART + 0)
+#define MSC313_GPIO_FUART_TX	(MSC313_GPIO_FUART + 1)
+#define MSC313_GPIO_FUART_CTS	(MSC313_GPIO_FUART + 2)
+#define MSC313_GPIO_FUART_RTS	(MSC313_GPIO_FUART + 3)
+
+#define MSC313_GPIO_SR		(MSC313_GPIO_FUART_RTS + 1)
+#define MSC313_GPIO_SR_IO2	(MSC313_GPIO_SR + 0)
+#define MSC313_GPIO_SR_IO3	(MSC313_GPIO_SR + 1)
+#define MSC313_GPIO_SR_IO4	(MSC313_GPIO_SR + 2)
+#define MSC313_GPIO_SR_IO5	(MSC313_GPIO_SR + 3)
+#define MSC313_GPIO_SR_IO6	(MSC313_GPIO_SR + 4)
+#define MSC313_GPIO_SR_IO7	(MSC313_GPIO_SR + 5)
+#define MSC313_GPIO_SR_IO8	(MSC313_GPIO_SR + 6)
+#define MSC313_GPIO_SR_IO9	(MSC313_GPIO_SR + 7)
+#define MSC313_GPIO_SR_IO10	(MSC313_GPIO_SR + 8)
+#define MSC313_GPIO_SR_IO11	(MSC313_GPIO_SR + 9)
+#define MSC313_GPIO_SR_IO12	(MSC313_GPIO_SR + 10)
+#define MSC313_GPIO_SR_IO13	(MSC313_GPIO_SR + 11)
+#define MSC313_GPIO_SR_IO14	(MSC313_GPIO_SR + 12)
+#define MSC313_GPIO_SR_IO15	(MSC313_GPIO_SR + 13)
+#define MSC313_GPIO_SR_IO16	(MSC313_GPIO_SR + 14)
+#define MSC313_GPIO_SR_IO17	(MSC313_GPIO_SR + 15)
+
+#define MSC313_GPIO_SD		(MSC313_GPIO_SR_IO17 + 1)
+#define MSC313_GPIO_SD_CLK	(MSC313_GPIO_SD + 0)
+#define MSC313_GPIO_SD_CMD	(MSC313_GPIO_SD + 1)
+#define MSC313_GPIO_SD_D0	(MSC313_GPIO_SD + 2)
+#define MSC313_GPIO_SD_D1	(MSC313_GPIO_SD + 3)
+#define MSC313_GPIO_SD_D2	(MSC313_GPIO_SD + 4)
+#define MSC313_GPIO_SD_D3	(MSC313_GPIO_SD + 5)
+
+#define MSC313_GPIO_I2C1	(MSC313_GPIO_SD_D3 + 1)
+#define MSC313_GPIO_I2C1_SCL	(MSC313_GPIO_I2C1 + 0)
+#define MSC313_GPIO_I2C1_SDA	(MSC313_GPIO_I2C1 + 1)
+
+#define MSC313_GPIO_SPI0	(MSC313_GPIO_I2C1_SDA + 1)
+#define MSC313_GPIO_SPI0_CZ	(MSC313_GPIO_SPI0 + 0)
+#define MSC313_GPIO_SPI0_CK	(MSC313_GPIO_SPI0 + 1)
+#define MSC313_GPIO_SPI0_DI	(MSC313_GPIO_SPI0 + 2)
+#define MSC313_GPIO_SPI0_DO	(MSC313_GPIO_SPI0 + 3)
+
+#endif /* _DT_BINDINGS_MSC313_GPIO_H */
-- 
2.29.2

[PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller

[Daniel Palmer]

Add a binding description for the MStar/SigmaStar GPIO controller
found in the MSC313 and later ARMv7 SoCs.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 .../bindings/gpio/mstar,msc313-gpio.yaml      | 62 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
new file mode 100644
index 000000000000..8c7cfe3a51b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mstar,msc313-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/SigmaStar GPIO controller
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: mstar,msc313-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/msc313-gpio.h>
+
+    gpio: gpio@207800 {
+      compatible = "mstar,msc313e-gpio";
+      #gpio-cells = <2>;
+      reg = <0x207800 0x200>;
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 36 22>,
+                    <&pinctrl 22 63 4>,
+                    <&pinctrl 26 68 6>;
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&intc_fiq>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index db9c008a0395..87ca71f55de3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2131,6 +2131,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://linux-chenxing.org/
 F:	Documentation/devicetree/bindings/arm/mstar/*
+F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
 F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
 F:	include/dt-bindings/gpio/msc313-gpio.h
-- 
2.29.2

[PATCH v3 3/5] gpio: msc313: MStar MSC313 GPIO driver

[Daniel Palmer]

This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.

The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.

The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips

The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.

So far this only supports the MSC313 and MSC313E chips.

Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 MAINTAINERS                |   1 +
 drivers/gpio/Kconfig       |  11 +
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-msc313.c | 460 +++++++++++++++++++++++++++++++++++++
 4 files changed, 473 insertions(+)
 create mode 100644 drivers/gpio/gpio-msc313.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 87ca71f55de3..864e37e7659e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2134,6 +2134,7 @@ F:	Documentation/devicetree/bindings/arm/mstar/*
 F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
 F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
+F:	drivers/gpio/gpio-msc313.c
 F:	include/dt-bindings/gpio/msc313-gpio.h
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5d4de5cd6759..22ad5902299a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -737,6 +737,17 @@ config GPIO_AMD_FCH
 	  Note: This driver doesn't registers itself automatically, as it
 	  needs to be provided with platform specific configuration.
 	  (See eg. CONFIG_PCENGINES_APU2.)
+
+config GPIO_MSC313
+	bool "MStar MSC313 GPIO support"
+	depends on ARCH_MSTARV7
+	default ARCH_MSTARV7
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say Y here to support the main GPIO block on MStar/SigmaStar
+	  ARMv7 based SoCs.
+
 endmenu
 
 menu "Port-mapped I/O GPIO drivers"
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 09dada80ac34..b6c116a7c785 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_MOCKUP)		+= gpio-mockup.o
 obj-$(CONFIG_GPIO_MOXTET)		+= gpio-moxtet.o
 obj-$(CONFIG_GPIO_MPC5200)		+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)		+= gpio-mpc8xxx.o
+obj-$(CONFIG_GPIO_MSC313)		+= gpio-msc313.o
 obj-$(CONFIG_GPIO_MSIC)			+= gpio-msic.o
 obj-$(CONFIG_GPIO_MT7621)		+= gpio-mt7621.o
 obj-$(CONFIG_GPIO_MVEBU)		+= gpio-mvebu.o
diff --git a/drivers/gpio/gpio-msc313.c b/drivers/gpio/gpio-msc313.c
new file mode 100644
index 000000000000..da31a5ff7a2b
--- /dev/null
+++ b/drivers/gpio/gpio-msc313.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2020 Daniel Palmer<daniel@thingy.jp> */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/gpio/msc313-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define DRIVER_NAME "gpio-msc313"
+
+#define MSC313_GPIO_IN  BIT(0)
+#define MSC313_GPIO_OUT BIT(4)
+#define MSC313_GPIO_OEN BIT(5)
+
+/*
+ * These bits need to be saved to correctly restore the
+ * gpio state when resuming from suspend to memory.
+ */
+#define MSC313_GPIO_BITSTOSAVE (MSC313_GPIO_OUT | MSC313_GPIO_OEN)
+
+/* pad names for fuart, same for all SoCs so far */
+#define MSC313_PINNAME_FUART_RX		"fuart_rx"
+#define MSC313_PINNAME_FUART_TX		"fuart_tx"
+#define MSC313_PINNAME_FUART_CTS	"fuart_cts"
+#define MSC313_PINNAME_FUART_RTS	"fuart_rts"
+
+/* pad names for sr, mercury5 is different */
+#define MSC313_PINNAME_SR_IO2		"sr_io2"
+#define MSC313_PINNAME_SR_IO3		"sr_io3"
+#define MSC313_PINNAME_SR_IO4		"sr_io4"
+#define MSC313_PINNAME_SR_IO5		"sr_io5"
+#define MSC313_PINNAME_SR_IO6		"sr_io6"
+#define MSC313_PINNAME_SR_IO7		"sr_io7"
+#define MSC313_PINNAME_SR_IO8		"sr_io8"
+#define MSC313_PINNAME_SR_IO9		"sr_io9"
+#define MSC313_PINNAME_SR_IO10		"sr_io10"
+#define MSC313_PINNAME_SR_IO11		"sr_io11"
+#define MSC313_PINNAME_SR_IO12		"sr_io12"
+#define MSC313_PINNAME_SR_IO13		"sr_io13"
+#define MSC313_PINNAME_SR_IO14		"sr_io14"
+#define MSC313_PINNAME_SR_IO15		"sr_io15"
+#define MSC313_PINNAME_SR_IO16		"sr_io16"
+#define MSC313_PINNAME_SR_IO17		"sr_io17"
+
+/* pad names for sd, same for all SoCs so far */
+#define MSC313_PINNAME_SD_CLK		"sd_clk"
+#define MSC313_PINNAME_SD_CMD		"sd_cmd"
+#define MSC313_PINNAME_SD_D0		"sd_d0"
+#define MSC313_PINNAME_SD_D1		"sd_d1"
+#define MSC313_PINNAME_SD_D2		"sd_d2"
+#define MSC313_PINNAME_SD_D3		"sd_d3"
+
+/* pad names for i2c1, same for all SoCs so for */
+#define MSC313_PINNAME_I2C1_SCL		"i2c1_scl"
+#define MSC313_PINNAME_I2C1_SCA		"i2c1_sda"
+
+/* pad names for spi0, same for all SoCs so far */
+#define MSC313_PINNAME_SPI0_CZ		"spi0_cz"
+#define MSC313_PINNAME_SPI0_CK		"spi0_ck"
+#define MSC313_PINNAME_SPI0_DI		"spi0_di"
+#define MSC313_PINNAME_SPI0_DO		"spi0_do"
+
+#define FUART_NAMES			\
+	MSC313_PINNAME_FUART_RX,	\
+	MSC313_PINNAME_FUART_TX,	\
+	MSC313_PINNAME_FUART_CTS,	\
+	MSC313_PINNAME_FUART_RTS
+
+#define OFF_FUART_RX	0x50
+#define OFF_FUART_TX	0x54
+#define OFF_FUART_CTS	0x58
+#define OFF_FUART_RTS	0x5c
+
+#define FUART_OFFSETS	\
+	OFF_FUART_RX,	\
+	OFF_FUART_TX,	\
+	OFF_FUART_CTS,	\
+	OFF_FUART_RTS
+
+#define SR_NAMES		\
+	MSC313_PINNAME_SR_IO2,	\
+	MSC313_PINNAME_SR_IO3,	\
+	MSC313_PINNAME_SR_IO4,	\
+	MSC313_PINNAME_SR_IO5,	\
+	MSC313_PINNAME_SR_IO6,	\
+	MSC313_PINNAME_SR_IO7,	\
+	MSC313_PINNAME_SR_IO8,	\
+	MSC313_PINNAME_SR_IO9,	\
+	MSC313_PINNAME_SR_IO10,	\
+	MSC313_PINNAME_SR_IO11,	\
+	MSC313_PINNAME_SR_IO12,	\
+	MSC313_PINNAME_SR_IO13,	\
+	MSC313_PINNAME_SR_IO14,	\
+	MSC313_PINNAME_SR_IO15,	\
+	MSC313_PINNAME_SR_IO16,	\
+	MSC313_PINNAME_SR_IO17
+
+#define OFF_SR_IO2	0x88
+#define OFF_SR_IO3	0x8c
+#define OFF_SR_IO4	0x90
+#define OFF_SR_IO5	0x94
+#define OFF_SR_IO6	0x98
+#define OFF_SR_IO7	0x9c
+#define OFF_SR_IO8	0xa0
+#define OFF_SR_IO9	0xa4
+#define OFF_SR_IO10	0xa8
+#define OFF_SR_IO11	0xac
+#define OFF_SR_IO12	0xb0
+#define OFF_SR_IO13	0xb4
+#define OFF_SR_IO14	0xb8
+#define OFF_SR_IO15	0xbc
+#define OFF_SR_IO16	0xc0
+#define OFF_SR_IO17	0xc4
+
+#define SR_OFFSETS	\
+	OFF_SR_IO2,	\
+	OFF_SR_IO3,	\
+	OFF_SR_IO4,	\
+	OFF_SR_IO5,	\
+	OFF_SR_IO6,	\
+	OFF_SR_IO7,	\
+	OFF_SR_IO8,	\
+	OFF_SR_IO9,	\
+	OFF_SR_IO10,	\
+	OFF_SR_IO11,	\
+	OFF_SR_IO12,	\
+	OFF_SR_IO13,	\
+	OFF_SR_IO14,	\
+	OFF_SR_IO15,	\
+	OFF_SR_IO16,	\
+	OFF_SR_IO17
+
+#define SD_NAMES		\
+	MSC313_PINNAME_SD_CLK,	\
+	MSC313_PINNAME_SD_CMD,	\
+	MSC313_PINNAME_SD_D0,	\
+	MSC313_PINNAME_SD_D1,	\
+	MSC313_PINNAME_SD_D2,	\
+	MSC313_PINNAME_SD_D3
+
+#define OFF_SD_CLK	0x140
+#define OFF_SD_CMD	0x144
+#define OFF_SD_D0	0x148
+#define OFF_SD_D1	0x14c
+#define OFF_SD_D2	0x150
+#define OFF_SD_D3	0x154
+
+#define SD_OFFSETS	\
+	OFF_SD_CLK,	\
+	OFF_SD_CMD,	\
+	OFF_SD_D0,	\
+	OFF_SD_D1,	\
+	OFF_SD_D2,	\
+	OFF_SD_D3
+
+#define I2C1_NAMES			\
+	MSC313_PINNAME_I2C1_SCL,	\
+	MSC313_PINNAME_I2C1_SCA
+
+#define OFF_I2C1_SCL	0x188
+#define OFF_I2C1_SCA	0x18c
+
+#define I2C1_OFFSETS	\
+	OFF_I2C1_SCL,	\
+	OFF_I2C1_SCA
+
+#define SPI0_NAMES		\
+	MSC313_PINNAME_SPI0_CZ,	\
+	MSC313_PINNAME_SPI0_CK,	\
+	MSC313_PINNAME_SPI0_DI,	\
+	MSC313_PINNAME_SPI0_DO
+
+#define OFF_SPI0_CZ	0x1c0
+#define OFF_SPI0_CK	0x1c4
+#define OFF_SPI0_DI	0x1c8
+#define OFF_SPI0_DO	0x1cc
+
+#define SPI0_OFFSETS	\
+	OFF_SPI0_CZ,	\
+	OFF_SPI0_CK,	\
+	OFF_SPI0_DI,	\
+	OFF_SPI0_DO
+
+struct msc313_gpio_data {
+	const char * const *names;
+	const unsigned int *offsets;
+	const unsigned int num;
+};
+
+#define MSC313_GPIO_CHIPDATA(_chip) \
+static const struct msc313_gpio_data _chip##_data = { \
+	.names = _chip##_names, \
+	.offsets = _chip##_offsets, \
+	.num = ARRAY_SIZE(_chip##_offsets), \
+}
+
+#ifdef CONFIG_MACH_INFINITY
+static const char * const msc313_names[] = {
+	FUART_NAMES,
+	SR_NAMES,
+	SD_NAMES,
+	I2C1_NAMES,
+	SPI0_NAMES,
+};
+
+static const unsigned int msc313_offsets[] = {
+	FUART_OFFSETS,
+	SR_OFFSETS,
+	SD_OFFSETS,
+	I2C1_OFFSETS,
+	SPI0_OFFSETS,
+};
+
+MSC313_GPIO_CHIPDATA(msc313);
+#endif
+
+struct msc313_gpio {
+	void __iomem *base;
+	const struct msc313_gpio_data *gpio_data;
+	u8 *saved;
+};
+
+static void msc313_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct msc313_gpio *gpio = gpiochip_get_data(chip);
+	u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
+
+	if (value)
+		gpioreg |= MSC313_GPIO_OUT;
+	else
+		gpioreg &= ~MSC313_GPIO_OUT;
+
+	writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
+}
+
+static int msc313_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct msc313_gpio *gpio = gpiochip_get_data(chip);
+
+	return readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]) & MSC313_GPIO_IN;
+}
+
+static int msc313_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct msc313_gpio *gpio = gpiochip_get_data(chip);
+	u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
+
+	gpioreg |= MSC313_GPIO_OEN;
+	writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
+
+	return 0;
+}
+
+static int msc313_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct msc313_gpio *gpio = gpiochip_get_data(chip);
+	u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
+
+	gpioreg &= ~MSC313_GPIO_OEN;
+	if (value)
+		gpioreg |= MSC313_GPIO_OUT;
+	else
+		gpioreg &= ~MSC313_GPIO_OUT;
+	writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
+
+	return 0;
+}
+
+/*
+ * The interrupt handling happens in the parent interrupt controller,
+ * we don't do anything here.
+ */
+static struct irq_chip msc313_gpio_irqchip = {
+	.name = "GPIO",
+	.irq_eoi = irq_chip_eoi_parent,
+	.irq_mask = irq_chip_mask_parent,
+	.irq_unmask = irq_chip_unmask_parent,
+	.irq_set_type = irq_chip_set_type_parent,
+	.irq_set_affinity = irq_chip_set_affinity_parent,
+};
+
+/*
+ * The parent interrupt controller needs the GIC interrupt type set to GIC_SPI
+ * so we need to provide the fwspec. Essentially gpiochip_populate_parent_fwspec_twocell
+ * that puts GIC_SPI into the first cell.
+ */
+static void *msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc,
+					     unsigned int parent_hwirq,
+					     unsigned int parent_type)
+{
+	struct irq_fwspec *fwspec;
+
+	fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = gc->irq.parent_domain->fwnode;
+	fwspec->param_count = 3;
+	fwspec->param[0] = GIC_SPI;
+	fwspec->param[1] = parent_hwirq;
+	fwspec->param[2] = parent_type;
+
+	return fwspec;
+}
+
+static int msc313e_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
+					     unsigned int child,
+					     unsigned int child_type,
+					     unsigned int *parent,
+					     unsigned int *parent_type)
+{
+	struct msc313_gpio *priv = gpiochip_get_data(chip);
+	unsigned int offset = priv->gpio_data->offsets[child];
+
+	/*
+	 * only the spi0 pins have interrupts on the parent
+	 * on all of the known chips and so far they are all
+	 * mapped to the same place
+	 */
+	if (offset >= OFF_SPI0_CZ && offset <= OFF_SPI0_DO) {
+		*parent_type = child_type;
+		*parent = ((offset - OFF_SPI0_CZ) >> 2) + 28;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int msc313_gpio_probe(struct platform_device *pdev)
+{
+	const struct msc313_gpio_data *match_data;
+	struct msc313_gpio *gpio;
+	struct gpio_chip *gpiochip;
+	struct gpio_irq_chip *gpioirqchip;
+	struct irq_domain *parent_domain;
+	struct device_node *parent_node;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	match_data = of_device_get_match_data(dev);
+	if (!match_data)
+		return -EINVAL;
+
+	parent_node = of_irq_find_parent(dev->of_node);
+	if (!parent_node)
+		return -ENODEV;
+
+	parent_domain = irq_find_host(parent_node);
+	if (!parent_domain)
+		return -ENODEV;
+
+	gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->gpio_data = match_data;
+
+	gpio->saved = devm_kcalloc(dev, gpio->gpio_data->num, sizeof(*gpio->saved), GFP_KERNEL);
+	if (!gpio->saved)
+		return -ENOMEM;
+
+	gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->base))
+		return PTR_ERR(gpio->base);
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpiochip = devm_kzalloc(dev, sizeof(*gpiochip), GFP_KERNEL);
+	if (!gpiochip)
+		return -ENOMEM;
+
+	gpiochip->label = DRIVER_NAME;
+	gpiochip->parent = dev;
+	gpiochip->request = gpiochip_generic_request;
+	gpiochip->free = gpiochip_generic_free;
+	gpiochip->direction_input = msc313_gpio_direction_input;
+	gpiochip->direction_output = msc313_gpio_direction_output;
+	gpiochip->get = msc313_gpio_get;
+	gpiochip->set = msc313_gpio_set;
+	gpiochip->base = -1;
+	gpiochip->ngpio = gpio->gpio_data->num;
+	gpiochip->names = gpio->gpio_data->names;
+
+	gpioirqchip = &gpiochip->irq;
+	gpioirqchip->chip = &msc313_gpio_irqchip;
+	gpioirqchip->fwnode = of_node_to_fwnode(dev->of_node);
+	gpioirqchip->parent_domain = parent_domain;
+	gpioirqchip->child_to_parent_hwirq = msc313e_gpio_child_to_parent_hwirq;
+	gpioirqchip->populate_parent_alloc_arg = msc313_gpio_populate_parent_fwspec;
+	gpioirqchip->handler = handle_bad_irq;
+	gpioirqchip->default_type = IRQ_TYPE_NONE;
+
+	ret = devm_gpiochip_add_data(dev, gpiochip, gpio);
+	return ret;
+}
+
+static int msc313_gpio_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id msc313_gpio_of_match[] = {
+#ifdef CONFIG_MACH_INFINITY
+	{
+		.compatible = "mstar,msc313-gpio",
+		.data = &msc313_data,
+	},
+#endif
+	{ }
+};
+
+/*
+ * The GPIO controller loses the state of the registers when the
+ * SoC goes into suspend to memory mode so we need to save some
+ * of the register bits before suspending and put it back when resuming
+ */
+static int __maybe_unused msc313_gpio_suspend(struct device *dev)
+{
+	struct msc313_gpio *gpio = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < gpio->gpio_data->num; i++)
+		gpio->saved[i] = readb_relaxed(gpio->base + gpio->gpio_data->offsets[i]) & MSC313_GPIO_BITSTOSAVE;
+
+	return 0;
+}
+
+static int __maybe_unused msc313_gpio_resume(struct device *dev)
+{
+	struct msc313_gpio *gpio = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < gpio->gpio_data->num; i++)
+		writeb_relaxed(gpio->saved[i], gpio->base + gpio->gpio_data->offsets[i]);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(msc313_gpio_ops, msc313_gpio_suspend, msc313_gpio_resume);
+
+static struct platform_driver msc313_gpio_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = msc313_gpio_of_match,
+		.pm = &msc313_gpio_ops,
+	},
+	.probe = msc313_gpio_probe,
+	.remove = msc313_gpio_remove,
+};
+
+builtin_platform_driver(msc313_gpio_driver);
-- 
2.29.2

[PATCH v3 4/5] ARM: mstar: Add gpio controller to MStar base dtsi

[Daniel Palmer]

The GPIO controller is at the same address in all of the
currently known chips so create a node for it in the base
dtsi.

Some extra properties are needed to actually use it so
disable it by default.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/mstar-v7.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index f07880561e11..81369bc07f78 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -109,6 +109,16 @@ l3bridge: l3bridge@204400 {
 				reg = <0x204400 0x200>;
 			};
 
+			gpio: gpio@207800 {
+				#gpio-cells = <2>;
+				reg = <0x207800 0x200>;
+				gpio-controller;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&intc_fiq>;
+				status = "disabled";
+			};
+
 			pm_uart: uart@221000 {
 				compatible = "ns16550a";
 				reg = <0x221000 0x100>;
-- 
2.29.2

[PATCH v3 5/5] ARM: mstar: Fill in GPIO controller properties for infinity

[Daniel Palmer]

Fill in the properties needed to use the GPIO controller
in the infinity and infinity3 chips.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/mstar-infinity.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
index cd911adef014..0bee517797f4 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -6,6 +6,13 @@
 
 #include "mstar-v7.dtsi"
 
+#include <dt-bindings/gpio/msc313-gpio.h>
+
 &imi {
 	reg = <0xa0000000 0x16000>;
 };
+
+&gpio {
+	compatible = "mstar,msc313-gpio";
+	status = "okay";
+};
-- 
2.29.2

Re: [PATCH v3 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver

[Rob Herring]

On Mon, 09 Nov 2020 21:17:27 +0900, Daniel Palmer wrote:
> Header adds defines for the gpio number of each pad from the driver view.
> 
> The gpio block seems to have enough registers for 128 lines but what line
> is mapped to a physical pin depends on the chip. The gpio block also seems
> to contain some registers that are not related to gpio but needed somewhere
> to go.
> 
> Because of the above the driver itself uses the index of a pin's offset in
> an array of the possible offsets for a chip as the gpio number.
> 
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
>  MAINTAINERS                            |  1 +
>  include/dt-bindings/gpio/msc313-gpio.h | 53 ++++++++++++++++++++++++++
>  2 files changed, 54 insertions(+)
>  create mode 100644 include/dt-bindings/gpio/msc313-gpio.h
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller

[Rob Herring]

On Mon, Nov 09, 2020 at 09:17:28PM +0900, Daniel Palmer wrote:
> Add a binding description for the MStar/SigmaStar GPIO controller
> found in the MSC313 and later ARMv7 SoCs.
> 
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
>  .../bindings/gpio/mstar,msc313-gpio.yaml      | 62 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> new file mode 100644
> index 000000000000..8c7cfe3a51b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/mstar,msc313-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MStar/SigmaStar GPIO controller
> +
> +maintainers:
> +  - Daniel Palmer <daniel@thingy.jp>
> +
> +properties:
> +  $nodename:
> +    pattern: "^gpio@[0-9a-f]+$"
> +
> +  compatible:
> +    const: mstar,msc313-gpio
> +
> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-ranges: true
> +
> +  gpio-ranges-group-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array

Not a standard property. Probably should be dropped, but why do you need 
this and what is it for?

> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/msc313-gpio.h>
> +
> +    gpio: gpio@207800 {
> +      compatible = "mstar,msc313e-gpio";
> +      #gpio-cells = <2>;
> +      reg = <0x207800 0x200>;
> +      gpio-controller;
> +      gpio-ranges = <&pinctrl 0 36 22>,
> +                    <&pinctrl 22 63 4>,
> +                    <&pinctrl 26 68 6>;
> +      #interrupt-cells = <2>;
> +      interrupt-controller;
> +      interrupt-parent = <&intc_fiq>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index db9c008a0395..87ca71f55de3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2131,6 +2131,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>  S:	Maintained
>  W:	http://linux-chenxing.org/
>  F:	Documentation/devicetree/bindings/arm/mstar/*
> +F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
>  F:	arch/arm/boot/dts/mstar-*
>  F:	arch/arm/mach-mstar/
>  F:	include/dt-bindings/gpio/msc313-gpio.h
> -- 
> 2.29.2
> 

Re: [PATCH v3 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller

[Daniel Palmer]

Hi Rob,

On Thu, 12 Nov 2020 at 06:06, Rob Herring <robh@kernel.org> wrote:
> > +  gpio-ranges-group-names:
> > +    $ref: /schemas/types.yaml#/definitions/string-array
>
> Not a standard property. Probably should be dropped, but why do you need
> this and what is it for?

It's unneeded. I thought it was a standard item from the other files I
looked at when putting together mine.
I'll delete it for the next version.

Is there anything else that looks off?

Thanks,

Daniel