From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 5/7] arm64: dts: renesas: eagle: Enable MAX9286
Date: Thu, 15 Apr 2021 14:26:00 +0200 [thread overview]
Message-ID: <20210415122602.87697-6-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20210415122602.87697-1-jacopo+renesas@jmondi.org>
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
Enable the MAX9286 GMSL deserializer on the Eagle-V3M board.
Connected cameras should be defined in a device-tree overlay or included
after these definitions.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../arm64/boot/dts/renesas/r8a77970-eagle.dts | 106 ++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 874a7fc2730b..ab35202857f5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -6,6 +6,8 @@
* Copyright (C) 2017 Cogent Embedded, Inc.
*/
+#include <dt-bindings/gpio/gpio.h>
+
/dts-v1/;
#include "r8a77970.dtsi"
@@ -188,6 +190,11 @@ i2c0_pins: i2c0 {
function = "i2c0";
};
+ i2c3_pins: i2c3 {
+ groups = "i2c3_a";
+ function = "i2c3";
+ };
+
qspi0_pins: qspi0 {
groups = "qspi0_ctrl", "qspi0_data4";
function = "qspi0";
@@ -266,6 +273,105 @@ &rwdt {
status = "okay";
};
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out0>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ gmsl: gmsl-deserializer@48 {
+ compatible = "maxim,max9286";
+ reg = <0x48>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+ /* eagle-pca9654-max9286-pwdn */
+ enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
--
2.31.1
next prev parent reply other threads:[~2021-04-15 12:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 12:25 [PATCH v4 0/7] arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle Jacopo Mondi
2021-04-15 12:25 ` [PATCH v4 1/7] dt-bindings: media: max9286: Re-indent example Jacopo Mondi
2021-04-15 14:42 ` Laurent Pinchart
2021-04-15 16:40 ` Rob Herring
2021-04-15 12:25 ` [PATCH v4 2/7] dt-bindings: media: max9286: Define 'maxim,gpio-poc' Jacopo Mondi
2021-04-15 16:53 ` Rob Herring
2021-04-15 12:25 ` [PATCH v4 3/7] media: i2c: max9286: Use "maxim,gpio-poc" property Jacopo Mondi
2021-04-15 19:19 ` Laurent Pinchart
2021-04-18 15:01 ` Jacopo Mondi
2021-04-15 12:25 ` [PATCH v4 4/7] arm64: dts: renesas: r8a77970: Add csi40 port@0 Jacopo Mondi
2021-04-15 14:47 ` Laurent Pinchart
2021-04-15 16:47 ` Geert Uytterhoeven
2021-04-15 19:09 ` Laurent Pinchart
2021-04-15 12:26 ` Jacopo Mondi [this message]
2021-04-15 12:26 ` [PATCH v4 6/7] arm64: dts: renesas: eagle: Add GMSL .dtsi Jacopo Mondi
2021-04-15 12:26 ` [PATCH v4 7/7] DNI: arm64: dts: renesas: eagle: Include eagle-gmsl Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415122602.87697-6-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).