* [PATCH] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema
@ 2021-04-15 11:16 Rafał Miłecki
2021-04-20 20:08 ` Rob Herring
2021-04-20 21:01 ` [PATCH V2] " Rafał Miłecki
0 siblings, 2 replies; 4+ messages in thread
From: Rafał Miłecki @ 2021-04-15 11:16 UTC (permalink / raw)
To: Zhang Rui, Daniel Lezcano, Amit Kucheria, Rob Herring
Cc: linux-pm, devicetree, bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bindings/thermal/brcm,ns-thermal.txt | 37 ------------
.../bindings/thermal/brcm,ns-thermal.yaml | 59 +++++++++++++++++++
2 files changed, 59 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
deleted file mode 100644
index 68e047170039..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Broadcom Northstar Thermal
-
-This binding describes thermal sensor that is part of Northstar's DMU (Device
-Management Unit).
-
-Required properties:
-- compatible : Must be "brcm,ns-thermal"
-- reg : iomem address range of PVTMON registers
-- #thermal-sensor-cells : Should be <0>
-
-Example:
-
-thermal: thermal@1800c2c0 {
- compatible = "brcm,ns-thermal";
- reg = <0x1800c2c0 0x10>;
- #thermal-sensor-cells = <0>;
-};
-
-thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <1000>;
- coefficients = <(-556) 418000>;
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <125000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
-
- cooling-maps {
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
new file mode 100644
index 000000000000..50143e2f6bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Thermal
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+ Thermal sensor that is part of Northstar's DMU (Device Management Unit).
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ const: brcm,ns-thermal
+
+ reg:
+ description: PVTMON registers range
+
+ "#thermal-sensor-cells":
+ const: 0
+
+unevaluatedProperties: false
+
+required:
+ - reg
+
+examples:
+ - |
+ thermal: thermal@1800c2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x1800c2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
--
2.26.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema
2021-04-15 11:16 [PATCH] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema Rafał Miłecki
@ 2021-04-20 20:08 ` Rob Herring
2021-04-20 21:01 ` [PATCH V2] " Rafał Miłecki
1 sibling, 0 replies; 4+ messages in thread
From: Rob Herring @ 2021-04-20 20:08 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Zhang Rui, Daniel Lezcano, Amit Kucheria, linux-pm, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
On Thu, Apr 15, 2021 at 01:16:55PM +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This helps validating DTS files.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> .../bindings/thermal/brcm,ns-thermal.txt | 37 ------------
> .../bindings/thermal/brcm,ns-thermal.yaml | 59 +++++++++++++++++++
> 2 files changed, 59 insertions(+), 37 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
> deleted file mode 100644
> index 68e047170039..000000000000
> --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -* Broadcom Northstar Thermal
> -
> -This binding describes thermal sensor that is part of Northstar's DMU (Device
> -Management Unit).
> -
> -Required properties:
> -- compatible : Must be "brcm,ns-thermal"
> -- reg : iomem address range of PVTMON registers
> -- #thermal-sensor-cells : Should be <0>
> -
> -Example:
> -
> -thermal: thermal@1800c2c0 {
> - compatible = "brcm,ns-thermal";
> - reg = <0x1800c2c0 0x10>;
> - #thermal-sensor-cells = <0>;
> -};
> -
> -thermal-zones {
> - cpu_thermal: cpu-thermal {
> - polling-delay-passive = <0>;
> - polling-delay = <1000>;
> - coefficients = <(-556) 418000>;
> - thermal-sensors = <&thermal>;
> -
> - trips {
> - cpu-crit {
> - temperature = <125000>;
> - hysteresis = <0>;
> - type = "critical";
> - };
> - };
> -
> - cooling-maps {
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
> new file mode 100644
> index 000000000000..50143e2f6bcb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar Thermal
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +description:
> + Thermal sensor that is part of Northstar's DMU (Device Management Unit).
> +
> +allOf:
> + - $ref: thermal-sensor.yaml#
> +
> +properties:
> + compatible:
> + const: brcm,ns-thermal
> +
> + reg:
> + description: PVTMON registers range
How many?
> +
> + "#thermal-sensor-cells":
> + const: 0
> +
> +unevaluatedProperties: false
> +
> +required:
> + - reg
> +
> +examples:
> + - |
> + thermal: thermal@1800c2c0 {
> + compatible = "brcm,ns-thermal";
> + reg = <0x1800c2c0 0x10>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <1000>;
> + coefficients = <(-556) 418000>;
> + thermal-sensors = <&thermal>;
> +
> + trips {
> + cpu-crit {
> + temperature = <125000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + };
> + };
> + };
> --
> 2.26.2
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH V2] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema
2021-04-15 11:16 [PATCH] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema Rafał Miłecki
2021-04-20 20:08 ` Rob Herring
@ 2021-04-20 21:01 ` Rafał Miłecki
2021-04-21 17:12 ` Rob Herring
1 sibling, 1 reply; 4+ messages in thread
From: Rafał Miłecki @ 2021-04-20 21:01 UTC (permalink / raw)
To: Zhang Rui, Daniel Lezcano, Amit Kucheria, Rob Herring
Cc: linux-pm, devicetree, bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Add maxItems to the reg property
---
.../bindings/thermal/brcm,ns-thermal.txt | 37 ------------
.../bindings/thermal/brcm,ns-thermal.yaml | 60 +++++++++++++++++++
2 files changed, 60 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
deleted file mode 100644
index 68e047170039..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Broadcom Northstar Thermal
-
-This binding describes thermal sensor that is part of Northstar's DMU (Device
-Management Unit).
-
-Required properties:
-- compatible : Must be "brcm,ns-thermal"
-- reg : iomem address range of PVTMON registers
-- #thermal-sensor-cells : Should be <0>
-
-Example:
-
-thermal: thermal@1800c2c0 {
- compatible = "brcm,ns-thermal";
- reg = <0x1800c2c0 0x10>;
- #thermal-sensor-cells = <0>;
-};
-
-thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <1000>;
- coefficients = <(-556) 418000>;
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <125000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
-
- cooling-maps {
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
new file mode 100644
index 000000000000..fdeb333e010d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Thermal
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+ Thermal sensor that is part of Northstar's DMU (Device Management Unit).
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ const: brcm,ns-thermal
+
+ reg:
+ description: PVTMON registers range
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 0
+
+unevaluatedProperties: false
+
+required:
+ - reg
+
+examples:
+ - |
+ thermal: thermal@1800c2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x1800c2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
--
2.26.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH V2] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema
2021-04-20 21:01 ` [PATCH V2] " Rafał Miłecki
@ 2021-04-21 17:12 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2021-04-21 17:12 UTC (permalink / raw)
To: Rafał Miłecki
Cc: devicetree, linux-pm, Rafał Miłecki, Daniel Lezcano,
bcm-kernel-feedback-list, Amit Kucheria, Rob Herring, Zhang Rui
On Tue, 20 Apr 2021 23:01:04 +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This helps validating DTS files.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> V2: Add maxItems to the reg property
> ---
> .../bindings/thermal/brcm,ns-thermal.txt | 37 ------------
> .../bindings/thermal/brcm,ns-thermal.yaml | 60 +++++++++++++++++++
> 2 files changed, 60 insertions(+), 37 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-04-21 17:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-15 11:16 [PATCH] dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema Rafał Miłecki
2021-04-20 20:08 ` Rob Herring
2021-04-20 21:01 ` [PATCH V2] " Rafał Miłecki
2021-04-21 17:12 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).