* [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options [not found] <20220103154616.308376-1-gary.bisson@boundarydevices.com> @ 2022-01-03 15:46 ` Gary Bisson 2022-01-12 8:30 ` Neil Armstrong 2022-01-03 15:46 ` [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson [not found] ` <20220112211642.2248901-1-gary.bisson@boundarydevices.com> 2 siblings, 1 reply; 9+ messages in thread From: Gary Bisson @ 2022-01-03 15:46 UTC (permalink / raw) To: linux-amlogic Cc: Gary Bisson, Rob Herring, Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel Add missing PWM_F pin muxing for GPIOA_11 and GPIOZ_12. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Cc: Rob Herring <robh+dt@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- .../arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 00c6f53290d4..af1357c48bee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -894,6 +894,22 @@ mux { }; }; + pwm_f_z_pins: pwm-f-z { + mux { + groups = "pwm_f_z"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_a_pins: pwm-f-a { + mux { + groups = "pwm_f_a"; + function = "pwm_f"; + bias-disable; + }; + }; + pwm_f_x_pins: pwm-f-x { mux { groups = "pwm_f_x"; -- 2.34.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options 2022-01-03 15:46 ` [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options Gary Bisson @ 2022-01-12 8:30 ` Neil Armstrong 0 siblings, 0 replies; 9+ messages in thread From: Neil Armstrong @ 2022-01-12 8:30 UTC (permalink / raw) To: Gary Bisson, linux-amlogic Cc: Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel On 03/01/2022 16:46, Gary Bisson wrote: > Add missing PWM_F pin muxing for GPIOA_11 and GPIOZ_12. > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > --- > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: Kevin Hilman <khilman@baylibre.com> > Cc: Jerome Brunet <jbrunet@baylibre.com> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > .../arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > index 00c6f53290d4..af1357c48bee 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > @@ -894,6 +894,22 @@ mux { > }; > }; > > + pwm_f_z_pins: pwm-f-z { > + mux { > + groups = "pwm_f_z"; > + function = "pwm_f"; > + bias-disable; > + }; > + }; > + > + pwm_f_a_pins: pwm-f-a { > + mux { > + groups = "pwm_f_a"; > + function = "pwm_f"; > + bias-disable; > + }; > + }; > + > pwm_f_x_pins: pwm-f-x { > mux { > groups = "pwm_f_x"; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing [not found] <20220103154616.308376-1-gary.bisson@boundarydevices.com> 2022-01-03 15:46 ` [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options Gary Bisson @ 2022-01-03 15:46 ` Gary Bisson 2022-01-12 8:33 ` Neil Armstrong [not found] ` <20220112211642.2248901-1-gary.bisson@boundarydevices.com> 2 siblings, 1 reply; 9+ messages in thread From: Gary Bisson @ 2022-01-03 15:46 UTC (permalink / raw) To: linux-amlogic Cc: Gary Bisson, Rob Herring, Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel - RX/TX signals can be mapped on 2 different pairs of pins so supporting both options - RTS/CTS signals however only have 1 option available Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Cc: Rob Herring <robh+dt@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index af1357c48bee..3a7773ffbd08 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1952,6 +1952,33 @@ mux { }; }; + uart_ao_b_1_pins: uart-ao-b-1 { + mux { + groups = "uart_ao_b_tx_2", + "uart_ao_b_rx_3"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_2_pins: uart-ao-b-2 { + mux { + groups = "uart_ao_b_tx_8", + "uart_ao_b_rx_9"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { + mux { + groups = "uart_ao_b_cts", + "uart_ao_b_rts"; + function = "uart_ao_b"; + bias-disable; + }; + }; + pwm_a_e_pins: pwm-a-e { mux { groups = "pwm_a_e"; -- 2.34.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing 2022-01-03 15:46 ` [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson @ 2022-01-12 8:33 ` Neil Armstrong 2022-01-12 13:01 ` Gary Bisson 0 siblings, 1 reply; 9+ messages in thread From: Neil Armstrong @ 2022-01-12 8:33 UTC (permalink / raw) To: Gary Bisson, linux-amlogic Cc: Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel Hi, On 03/01/2022 16:46, Gary Bisson wrote: > - RX/TX signals can be mapped on 2 different pairs of pins so supporting > both options > - RTS/CTS signals however only have 1 option available > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > --- > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: Kevin Hilman <khilman@baylibre.com> > Cc: Jerome Brunet <jbrunet@baylibre.com> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > index af1357c48bee..3a7773ffbd08 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > @@ -1952,6 +1952,33 @@ mux { > }; > }; > > + uart_ao_b_1_pins: uart-ao-b-1 { > + mux { > + groups = "uart_ao_b_tx_2", > + "uart_ao_b_rx_3"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; > + > + uart_ao_b_2_pins: uart-ao-b-2 { > + mux { > + groups = "uart_ao_b_tx_8", > + "uart_ao_b_rx_9"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; I'm not fan of these nodes namings. Perhaps : - uart-ao-b-2-3 - uart-ao-b-8-9 so the actual pins numbers used are more clear ? > + > + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { > + mux { > + groups = "uart_ao_b_cts", > + "uart_ao_b_rts"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; > + > pwm_a_e_pins: pwm-a-e { > mux { > groups = "pwm_a_e"; > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing 2022-01-12 8:33 ` Neil Armstrong @ 2022-01-12 13:01 ` Gary Bisson 2022-01-12 14:34 ` Neil Armstrong 0 siblings, 1 reply; 9+ messages in thread From: Gary Bisson @ 2022-01-12 13:01 UTC (permalink / raw) To: Neil Armstrong Cc: linux-amlogic, Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel Hi, On Wed, Jan 12, 2022 at 09:33:42AM +0100, Neil Armstrong wrote: > Hi, > > On 03/01/2022 16:46, Gary Bisson wrote: > > - RX/TX signals can be mapped on 2 different pairs of pins so supporting > > both options > > - RTS/CTS signals however only have 1 option available > > > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > > --- > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Neil Armstrong <narmstrong@baylibre.com> > > Cc: Kevin Hilman <khilman@baylibre.com> > > Cc: Jerome Brunet <jbrunet@baylibre.com> > > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > Cc: devicetree@vger.kernel.org > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: linux-kernel@vger.kernel.org > > --- > > .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ > > 1 file changed, 27 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > > index af1357c48bee..3a7773ffbd08 100644 > > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > > @@ -1952,6 +1952,33 @@ mux { > > }; > > }; > > > > + uart_ao_b_1_pins: uart-ao-b-1 { > > + mux { > > + groups = "uart_ao_b_tx_2", > > + "uart_ao_b_rx_3"; > > + function = "uart_ao_b"; > > + bias-disable; > > + }; > > + }; > > + > > + uart_ao_b_2_pins: uart-ao-b-2 { > > + mux { > > + groups = "uart_ao_b_tx_8", > > + "uart_ao_b_rx_9"; > > + function = "uart_ao_b"; > > + bias-disable; > > + }; > > + }; > > I'm not fan of these nodes namings. > > Perhaps : > - uart-ao-b-2-3 > - uart-ao-b-8-9 > > so the actual pins numbers used are more clear ? Sure, I wasn't convinced by that naming either. I although thought about: - uart-ao-b - uart-ao-b-alt Let me know which one you prefer and I'll respin the patch. Also let me know if I should re-send the entire series or just this patch. Regards, Gary ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing 2022-01-12 13:01 ` Gary Bisson @ 2022-01-12 14:34 ` Neil Armstrong 0 siblings, 0 replies; 9+ messages in thread From: Neil Armstrong @ 2022-01-12 14:34 UTC (permalink / raw) To: Gary Bisson Cc: linux-amlogic, Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel On 12/01/2022 14:01, Gary Bisson wrote: > Hi, > > On Wed, Jan 12, 2022 at 09:33:42AM +0100, Neil Armstrong wrote: >> Hi, >> >> On 03/01/2022 16:46, Gary Bisson wrote: >>> - RX/TX signals can be mapped on 2 different pairs of pins so supporting >>> both options >>> - RTS/CTS signals however only have 1 option available >>> >>> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> >>> --- >>> Cc: Rob Herring <robh+dt@kernel.org> >>> Cc: Neil Armstrong <narmstrong@baylibre.com> >>> Cc: Kevin Hilman <khilman@baylibre.com> >>> Cc: Jerome Brunet <jbrunet@baylibre.com> >>> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> >>> Cc: devicetree@vger.kernel.org >>> Cc: linux-arm-kernel@lists.infradead.org >>> Cc: linux-kernel@vger.kernel.org >>> --- >>> .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ >>> 1 file changed, 27 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi >>> index af1357c48bee..3a7773ffbd08 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi >>> @@ -1952,6 +1952,33 @@ mux { >>> }; >>> }; >>> >>> + uart_ao_b_1_pins: uart-ao-b-1 { >>> + mux { >>> + groups = "uart_ao_b_tx_2", >>> + "uart_ao_b_rx_3"; >>> + function = "uart_ao_b"; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + uart_ao_b_2_pins: uart-ao-b-2 { >>> + mux { >>> + groups = "uart_ao_b_tx_8", >>> + "uart_ao_b_rx_9"; >>> + function = "uart_ao_b"; >>> + bias-disable; >>> + }; >>> + }; >> >> I'm not fan of these nodes namings. >> >> Perhaps : >> - uart-ao-b-2-3 >> - uart-ao-b-8-9 >> >> so the actual pins numbers used are more clear ? > > Sure, I wasn't convinced by that naming either. I although thought > about: > - uart-ao-b > - uart-ao-b-alt Not sure about these because it means one is the default and the second is an alternate one, and I'm not sure about that. If it's the case, then this naming is ok. > > Let me know which one you prefer and I'll respin the patch. > Also let me know if I should re-send the entire series or just this > patch. I'm lazy, so the entire patchset please :-) Thanks, Neil > > Regards, > Gary > ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <20220112211642.2248901-1-gary.bisson@boundarydevices.com>]
* [PATCH v2 2/3] arm64: dts: meson-g12-common: add more pwm_f options [not found] ` <20220112211642.2248901-1-gary.bisson@boundarydevices.com> @ 2022-01-12 21:16 ` Gary Bisson 2022-01-12 21:16 ` [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson 1 sibling, 0 replies; 9+ messages in thread From: Gary Bisson @ 2022-01-12 21:16 UTC (permalink / raw) To: linux-amlogic Cc: Gary Bisson, Neil Armstrong, Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel Add missing PWM_F pin muxing for GPIOA_11 and GPIOZ_12. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> --- Cc: Rob Herring <robh+dt@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- .../arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 00c6f53290d4..af1357c48bee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -894,6 +894,22 @@ mux { }; }; + pwm_f_z_pins: pwm-f-z { + mux { + groups = "pwm_f_z"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_a_pins: pwm-f-a { + mux { + groups = "pwm_f_a"; + function = "pwm_f"; + bias-disable; + }; + }; + pwm_f_x_pins: pwm-f-x { mux { groups = "pwm_f_x"; -- 2.34.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing [not found] ` <20220112211642.2248901-1-gary.bisson@boundarydevices.com> 2022-01-12 21:16 ` [PATCH v2 2/3] arm64: dts: meson-g12-common: add more pwm_f options Gary Bisson @ 2022-01-12 21:16 ` Gary Bisson 2022-01-13 8:57 ` Neil Armstrong 1 sibling, 1 reply; 9+ messages in thread From: Gary Bisson @ 2022-01-12 21:16 UTC (permalink / raw) To: linux-amlogic Cc: Gary Bisson, Rob Herring, Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel - RX/TX signals can be mapped on 2 different pairs of pins so supporting both options - RTS/CTS signals however only have 1 option available Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Changes v1->v2: - renamed nodes as suggested by Neil Cc: Rob Herring <robh+dt@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index af1357c48bee..62350c408e16 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1952,6 +1952,33 @@ mux { }; }; + uart_ao_b_2_3_pins: uart-ao-b-2-3 { + mux { + groups = "uart_ao_b_tx_2", + "uart_ao_b_rx_3"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_8_9_pins: uart-ao-b-8-9 { + mux { + groups = "uart_ao_b_tx_8", + "uart_ao_b_rx_9"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { + mux { + groups = "uart_ao_b_cts", + "uart_ao_b_rts"; + function = "uart_ao_b"; + bias-disable; + }; + }; + pwm_a_e_pins: pwm-a-e { mux { groups = "pwm_a_e"; -- 2.34.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing 2022-01-12 21:16 ` [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson @ 2022-01-13 8:57 ` Neil Armstrong 0 siblings, 0 replies; 9+ messages in thread From: Neil Armstrong @ 2022-01-13 8:57 UTC (permalink / raw) To: Gary Bisson, linux-amlogic Cc: Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree, linux-arm-kernel, linux-kernel On 12/01/2022 22:16, Gary Bisson wrote: > - RX/TX signals can be mapped on 2 different pairs of pins so supporting > both options > - RTS/CTS signals however only have 1 option available > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > --- > Changes v1->v2: > - renamed nodes as suggested by Neil > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: Kevin Hilman <khilman@baylibre.com> > Cc: Jerome Brunet <jbrunet@baylibre.com> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > .../boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > index af1357c48bee..62350c408e16 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > @@ -1952,6 +1952,33 @@ mux { > }; > }; > > + uart_ao_b_2_3_pins: uart-ao-b-2-3 { > + mux { > + groups = "uart_ao_b_tx_2", > + "uart_ao_b_rx_3"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; > + > + uart_ao_b_8_9_pins: uart-ao-b-8-9 { > + mux { > + groups = "uart_ao_b_tx_8", > + "uart_ao_b_rx_9"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; > + > + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { > + mux { > + groups = "uart_ao_b_cts", > + "uart_ao_b_rts"; > + function = "uart_ao_b"; > + bias-disable; > + }; > + }; > + > pwm_a_e_pins: pwm-a-e { > mux { > groups = "pwm_a_e"; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Thanks ! Neil ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-01-13 8:58 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20220103154616.308376-1-gary.bisson@boundarydevices.com> 2022-01-03 15:46 ` [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options Gary Bisson 2022-01-12 8:30 ` Neil Armstrong 2022-01-03 15:46 ` [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson 2022-01-12 8:33 ` Neil Armstrong 2022-01-12 13:01 ` Gary Bisson 2022-01-12 14:34 ` Neil Armstrong [not found] ` <20220112211642.2248901-1-gary.bisson@boundarydevices.com> 2022-01-12 21:16 ` [PATCH v2 2/3] arm64: dts: meson-g12-common: add more pwm_f options Gary Bisson 2022-01-12 21:16 ` [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing Gary Bisson 2022-01-13 8:57 ` Neil Armstrong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).