* [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings
@ 2022-09-25 11:05 Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
` (14 more replies)
0 siblings, 15 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Hi,
Overview
========
This is the *fourth* patchset around Qualcomm pinctrl in recent days:
1. First round of TLMM fixes: merged
2. LPASS fixes: https://lore.kernel.org/linux-devicetree/20220922195651.345369-1-krzysztof.kozlowski@linaro.org/T/#t
3. ARMv7 TLMM fixes: https://lore.kernel.org/linux-devicetree/20220924080459.13084-1-krzysztof.kozlowski@linaro.org/T/#t
4. ARMv8 remaining TLMM fixes: THIS PATCHSET
Dependencies
============
1. No dependencies.
2. dt-bindings are independent of DTS patches.
Best regards,
Krzysztof
Krzysztof Kozlowski (15):
arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT
schema
arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema
(really)
arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names
arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions
arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions
arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and
gpio-line-names
dt-bindings: pinctrl: qcom,sm8250: fix matching pin config
dt-bindings: pinctrl: qcom,sm8250: add input-enable
dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable
dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs
.../bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 12 +-
.../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 153 ++---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +--
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 12 +-
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 8 +-
.../boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
.../dts/qcom/sc7280-herobrine-evoker-r0.dts | 1 -
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 -
.../dts/qcom/sc7280-herobrine-villager.dtsi | 1 -
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 44 +-
.../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 10 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 26 +-
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 20 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 316 +++++-----
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 12 +-
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 12 +-
.../arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 +-
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +
arch/arm64/boot/dts/qcom/sm6125.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 38 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 18 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 556 +++++++-----------
22 files changed, 594 insertions(+), 725 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:33 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Krzysztof Kozlowski
` (13 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Drop also unneeded split between mux and config.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 12 +-
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 38 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 16 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 556 +++++++-----------
4 files changed, 239 insertions(+), 383 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index bf8077a1cf9a..62aa32f460ad 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1210,33 +1210,33 @@ &tlmm {
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
- lt9611_irq_pin: lt9611-irq {
+ lt9611_irq_pin: lt9611-irq-state {
pins = "gpio63";
function = "gpio";
bias-disable;
};
- sdc2_default_state: sdc2-default {
- clk {
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- data {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
- sdc2_card_det_n: sd-card-det-n {
+ sdc2_card_det_n: sd-card-det-n-state {
pins = "gpio77";
function = "gpio";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index a102aa5efa32..9db6136321b4 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -799,31 +799,19 @@ wcd_tx: wcd9380-tx@0,3 {
&tlmm {
gpio-reserved-ranges = <28 4>, <40 4>;
- wcd938x_reset_default: wcd938x_reset_default {
- mux {
- pins = "gpio32";
- function = "gpio";
- };
-
- config {
- pins = "gpio32";
- drive-strength = <16>;
- output-high;
- };
- };
-
- wcd938x_reset_sleep: wcd938x_reset_sleep {
- mux {
- pins = "gpio32";
- function = "gpio";
- };
-
- config {
- pins = "gpio32";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
+ wcd938x_reset_default: wcd938x-reset-default-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <16>;
+ output-high;
+ };
+
+ wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 549e0a2aa9fe..72162852fae7 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -582,34 +582,34 @@ &slpi {
&tlmm {
gpio-reserved-ranges = <40 4>, <52 4>;
- sdc2_default_state: sdc2-default {
- clk {
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
drive-strength = <16>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc2_data";
drive-strength = <16>;
bias-pull-up;
};
};
- mdm2ap_default: mdm2ap-default {
+ mdm2ap_default: mdm2ap-default-state {
pins = "gpio1", "gpio3";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
- ts_int_default: ts-int-default {
+ ts_int_default: ts-int-default-state {
pins = "gpio39";
function = "gpio";
drive-strength = <2>;
@@ -617,14 +617,14 @@ ts_int_default: ts-int-default {
input-enable;
};
- ap2mdm_default: ap2mdm-default {
+ ap2mdm_default: ap2mdm-default-state {
pins = "gpio56", "gpio57";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
- sdc2_card_det_n: sd-card-det-n {
+ sdc2_card_det_n: sd-card-det-n-state {
pins = "gpio77";
function = "gpio";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e0416d611b66..7eac3ba90c63 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3798,8 +3798,8 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 181>;
wakeup-parent = <&pdc>;
- cci0_default: cci0-default {
- cci0_i2c0_default: cci0-i2c0-default {
+ cci0_default: cci0-default-state {
+ cci0_i2c0_default: cci0-i2c0-default-pins {
/* SDA, SCL */
pins = "gpio101", "gpio102";
function = "cci_i2c";
@@ -3808,7 +3808,7 @@ cci0_i2c0_default: cci0-i2c0-default {
drive-strength = <2>; /* 2 mA */
};
- cci0_i2c1_default: cci0-i2c1-default {
+ cci0_i2c1_default: cci0-i2c1-default-pins {
/* SDA, SCL */
pins = "gpio103", "gpio104";
function = "cci_i2c";
@@ -3818,8 +3818,8 @@ cci0_i2c1_default: cci0-i2c1-default {
};
};
- cci0_sleep: cci0-sleep {
- cci0_i2c0_sleep: cci0-i2c0-sleep {
+ cci0_sleep: cci0-sleep-state {
+ cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
/* SDA, SCL */
pins = "gpio101", "gpio102";
function = "cci_i2c";
@@ -3828,7 +3828,7 @@ cci0_i2c0_sleep: cci0-i2c0-sleep {
bias-pull-down;
};
- cci0_i2c1_sleep: cci0-i2c1-sleep {
+ cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
/* SDA, SCL */
pins = "gpio103", "gpio104";
function = "cci_i2c";
@@ -3838,8 +3838,8 @@ cci0_i2c1_sleep: cci0-i2c1-sleep {
};
};
- cci1_default: cci1-default {
- cci1_i2c0_default: cci1-i2c0-default {
+ cci1_default: cci1-default-state {
+ cci1_i2c0_default: cci1-i2c0-default-pins {
/* SDA, SCL */
pins = "gpio105","gpio106";
function = "cci_i2c";
@@ -3848,7 +3848,7 @@ cci1_i2c0_default: cci1-i2c0-default {
drive-strength = <2>; /* 2 mA */
};
- cci1_i2c1_default: cci1-i2c1-default {
+ cci1_i2c1_default: cci1-i2c1-default-pins {
/* SDA, SCL */
pins = "gpio107","gpio108";
function = "cci_i2c";
@@ -3858,8 +3858,8 @@ cci1_i2c1_default: cci1-i2c1-default {
};
};
- cci1_sleep: cci1-sleep {
- cci1_i2c0_sleep: cci1-i2c0-sleep {
+ cci1_sleep: cci1-sleep-state {
+ cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
/* SDA, SCL */
pins = "gpio105","gpio106";
function = "cci_i2c";
@@ -3868,7 +3868,7 @@ cci1_i2c0_sleep: cci1-i2c0-sleep {
drive-strength = <2>; /* 2 mA */
};
- cci1_i2c1_sleep: cci1-i2c1-sleep {
+ cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
/* SDA, SCL */
pins = "gpio107","gpio108";
function = "cci_i2c";
@@ -3878,22 +3878,22 @@ cci1_i2c1_sleep: cci1-i2c1-sleep {
};
};
- pri_mi2s_active: pri-mi2s-active {
- sclk {
+ pri_mi2s_active: pri-mi2s-active-state {
+ sclk-pins {
pins = "gpio138";
function = "mi2s0_sck";
drive-strength = <8>;
bias-disable;
};
- ws {
+ ws-pins {
pins = "gpio141";
function = "mi2s0_ws";
drive-strength = <8>;
output-high;
};
- data0 {
+ data0-pins {
pins = "gpio139";
function = "mi2s0_data0";
drive-strength = <8>;
@@ -3901,7 +3901,7 @@ data0 {
output-high;
};
- data1 {
+ data1-pins {
pins = "gpio140";
function = "mi2s0_data1";
drive-strength = <8>;
@@ -3909,632 +3909,500 @@ data1 {
};
};
- qup_i2c0_default: qup-i2c0-default {
- mux {
- pins = "gpio28", "gpio29";
- function = "qup0";
- };
-
- config {
- pins = "gpio28", "gpio29";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c0_default: qup-i2c0-default-state {
+ pins = "gpio28", "gpio29";
+ function = "qup0";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c1_default: qup-i2c1-default {
- pinmux {
- pins = "gpio4", "gpio5";
- function = "qup1";
- };
-
- config {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c1_default: qup-i2c1-default-state {
+ pins = "gpio4", "gpio5";
+ function = "qup1";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c2_default: qup-i2c2-default {
- mux {
- pins = "gpio115", "gpio116";
- function = "qup2";
- };
-
- config {
- pins = "gpio115", "gpio116";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c2_default: qup-i2c2-default-state {
+ pins = "gpio115", "gpio116";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c3_default: qup-i2c3-default {
- mux {
- pins = "gpio119", "gpio120";
- function = "qup3";
- };
-
- config {
- pins = "gpio119", "gpio120";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c3_default: qup-i2c3-default-state {
+ pins = "gpio119", "gpio120";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c4_default: qup-i2c4-default {
- mux {
- pins = "gpio8", "gpio9";
- function = "qup4";
- };
-
- config {
- pins = "gpio8", "gpio9";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c4_default: qup-i2c4-default-state {
+ pins = "gpio8", "gpio9";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c5_default: qup-i2c5-default {
- mux {
- pins = "gpio12", "gpio13";
- function = "qup5";
- };
-
- config {
- pins = "gpio12", "gpio13";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c5_default: qup-i2c5-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup5";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c6_default: qup-i2c6-default {
- mux {
- pins = "gpio16", "gpio17";
- function = "qup6";
- };
-
- config {
- pins = "gpio16", "gpio17";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c6_default: qup-i2c6-default-state {
+ pins = "gpio16", "gpio17";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c7_default: qup-i2c7-default {
- mux {
- pins = "gpio20", "gpio21";
- function = "qup7";
- };
-
- config {
- pins = "gpio20", "gpio21";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c7_default: qup-i2c7-default-state {
+ pins = "gpio20", "gpio21";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c8_default: qup-i2c8-default {
- mux {
- pins = "gpio24", "gpio25";
- function = "qup8";
- };
-
- config {
- pins = "gpio24", "gpio25";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c8_default: qup-i2c8-default-state {
+ pins = "gpio24", "gpio25";
+ function = "qup8";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c9_default: qup-i2c9-default {
- mux {
- pins = "gpio125", "gpio126";
- function = "qup9";
- };
-
- config {
- pins = "gpio125", "gpio126";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c9_default: qup-i2c9-default-state {
+ pins = "gpio125", "gpio126";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c10_default: qup-i2c10-default {
- mux {
- pins = "gpio129", "gpio130";
- function = "qup10";
- };
-
- config {
- pins = "gpio129", "gpio130";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c10_default: qup-i2c10-default-state {
+ pins = "gpio129", "gpio130";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c11_default: qup-i2c11-default {
- mux {
- pins = "gpio60", "gpio61";
- function = "qup11";
- };
-
- config {
- pins = "gpio60", "gpio61";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c11_default: qup-i2c11-default-state {
+ pins = "gpio60", "gpio61";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c12_default: qup-i2c12-default {
- mux {
- pins = "gpio32", "gpio33";
- function = "qup12";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c12_default: qup-i2c12-default-state {
+ pins = "gpio32", "gpio33";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c13_default: qup-i2c13-default {
- mux {
- pins = "gpio36", "gpio37";
- function = "qup13";
- };
-
- config {
- pins = "gpio36", "gpio37";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c13_default: qup-i2c13-default-state {
+ pins = "gpio36", "gpio37";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c14_default: qup-i2c14-default {
- mux {
- pins = "gpio40", "gpio41";
- function = "qup14";
- };
-
- config {
- pins = "gpio40", "gpio41";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c14_default: qup-i2c14-default-state {
+ pins = "gpio40", "gpio41";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c15_default: qup-i2c15-default {
- mux {
- pins = "gpio44", "gpio45";
- function = "qup15";
- };
-
- config {
- pins = "gpio44", "gpio45";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c15_default: qup-i2c15-default-state {
+ pins = "gpio44", "gpio45";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c16_default: qup-i2c16-default {
- mux {
- pins = "gpio48", "gpio49";
- function = "qup16";
- };
-
- config {
- pins = "gpio48", "gpio49";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c16_default: qup-i2c16-default-state {
+ pins = "gpio48", "gpio49";
+ function = "qup16";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c17_default: qup-i2c17-default {
- mux {
- pins = "gpio52", "gpio53";
- function = "qup17";
- };
-
- config {
- pins = "gpio52", "gpio53";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c17_default: qup-i2c17-default-state {
+ pins = "gpio52", "gpio53";
+ function = "qup17";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c18_default: qup-i2c18-default {
- mux {
- pins = "gpio56", "gpio57";
- function = "qup18";
- };
-
- config {
- pins = "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c18_default: qup-i2c18-default-state {
+ pins = "gpio56", "gpio57";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_i2c19_default: qup-i2c19-default {
- mux {
- pins = "gpio0", "gpio1";
- function = "qup19";
- };
-
- config {
- pins = "gpio0", "gpio1";
- drive-strength = <2>;
- bias-disable;
- };
+ qup_i2c19_default: qup-i2c19-default-state {
+ pins = "gpio0", "gpio1";
+ function = "qup19";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi0_cs: qup-spi0-cs {
+ qup_spi0_cs: qup-spi0-cs-state {
pins = "gpio31";
function = "qup0";
};
- qup_spi0_cs_gpio: qup-spi0-cs-gpio {
+ qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
pins = "gpio31";
function = "gpio";
};
- qup_spi0_data_clk: qup-spi0-data-clk {
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
pins = "gpio28", "gpio29",
"gpio30";
function = "qup0";
};
- qup_spi1_cs: qup-spi1-cs {
+ qup_spi1_cs: qup-spi1-cs-state {
pins = "gpio7";
function = "qup1";
};
- qup_spi1_cs_gpio: qup-spi1-cs-gpio {
+ qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
pins = "gpio7";
function = "gpio";
};
- qup_spi1_data_clk: qup-spi1-data-clk {
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
pins = "gpio4", "gpio5",
"gpio6";
function = "qup1";
};
- qup_spi2_cs: qup-spi2-cs {
+ qup_spi2_cs: qup-spi2-cs-state {
pins = "gpio118";
function = "qup2";
};
- qup_spi2_cs_gpio: qup-spi2-cs-gpio {
+ qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
pins = "gpio118";
function = "gpio";
};
- qup_spi2_data_clk: qup-spi2-data-clk {
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
pins = "gpio115", "gpio116",
"gpio117";
function = "qup2";
};
- qup_spi3_cs: qup-spi3-cs {
+ qup_spi3_cs: qup-spi3-cs-state {
pins = "gpio122";
function = "qup3";
};
- qup_spi3_cs_gpio: qup-spi3-cs-gpio {
+ qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
pins = "gpio122";
function = "gpio";
};
- qup_spi3_data_clk: qup-spi3-data-clk {
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
pins = "gpio119", "gpio120",
"gpio121";
function = "qup3";
};
- qup_spi4_cs: qup-spi4-cs {
+ qup_spi4_cs: qup-spi4-cs-state {
pins = "gpio11";
function = "qup4";
};
- qup_spi4_cs_gpio: qup-spi4-cs-gpio {
+ qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
pins = "gpio11";
function = "gpio";
};
- qup_spi4_data_clk: qup-spi4-data-clk {
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
pins = "gpio8", "gpio9",
"gpio10";
function = "qup4";
};
- qup_spi5_cs: qup-spi5-cs {
+ qup_spi5_cs: qup-spi5-cs-state {
pins = "gpio15";
function = "qup5";
};
- qup_spi5_cs_gpio: qup-spi5-cs-gpio {
+ qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
pins = "gpio15";
function = "gpio";
};
- qup_spi5_data_clk: qup-spi5-data-clk {
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
pins = "gpio12", "gpio13",
"gpio14";
function = "qup5";
};
- qup_spi6_cs: qup-spi6-cs {
+ qup_spi6_cs: qup-spi6-cs-state {
pins = "gpio19";
function = "qup6";
};
- qup_spi6_cs_gpio: qup-spi6-cs-gpio {
+ qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
pins = "gpio19";
function = "gpio";
};
- qup_spi6_data_clk: qup-spi6-data-clk {
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
pins = "gpio16", "gpio17",
"gpio18";
function = "qup6";
};
- qup_spi7_cs: qup-spi7-cs {
+ qup_spi7_cs: qup-spi7-cs-state {
pins = "gpio23";
function = "qup7";
};
- qup_spi7_cs_gpio: qup-spi7-cs-gpio {
+ qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
pins = "gpio23";
function = "gpio";
};
- qup_spi7_data_clk: qup-spi7-data-clk {
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
pins = "gpio20", "gpio21",
"gpio22";
function = "qup7";
};
- qup_spi8_cs: qup-spi8-cs {
+ qup_spi8_cs: qup-spi8-cs-state {
pins = "gpio27";
function = "qup8";
};
- qup_spi8_cs_gpio: qup-spi8-cs-gpio {
+ qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
pins = "gpio27";
function = "gpio";
};
- qup_spi8_data_clk: qup-spi8-data-clk {
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
pins = "gpio24", "gpio25",
"gpio26";
function = "qup8";
};
- qup_spi9_cs: qup-spi9-cs {
+ qup_spi9_cs: qup-spi9-cs-state {
pins = "gpio128";
function = "qup9";
};
- qup_spi9_cs_gpio: qup-spi9-cs-gpio {
+ qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
pins = "gpio128";
function = "gpio";
};
- qup_spi9_data_clk: qup-spi9-data-clk {
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
pins = "gpio125", "gpio126",
"gpio127";
function = "qup9";
};
- qup_spi10_cs: qup-spi10-cs {
+ qup_spi10_cs: qup-spi10-cs-state {
pins = "gpio132";
function = "qup10";
};
- qup_spi10_cs_gpio: qup-spi10-cs-gpio {
+ qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
pins = "gpio132";
function = "gpio";
};
- qup_spi10_data_clk: qup-spi10-data-clk {
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
pins = "gpio129", "gpio130",
"gpio131";
function = "qup10";
};
- qup_spi11_cs: qup-spi11-cs {
+ qup_spi11_cs: qup-spi11-cs-state {
pins = "gpio63";
function = "qup11";
};
- qup_spi11_cs_gpio: qup-spi11-cs-gpio {
+ qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
pins = "gpio63";
function = "gpio";
};
- qup_spi11_data_clk: qup-spi11-data-clk {
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
pins = "gpio60", "gpio61",
"gpio62";
function = "qup11";
};
- qup_spi12_cs: qup-spi12-cs {
+ qup_spi12_cs: qup-spi12-cs-state {
pins = "gpio35";
function = "qup12";
};
- qup_spi12_cs_gpio: qup-spi12-cs-gpio {
+ qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
pins = "gpio35";
function = "gpio";
};
- qup_spi12_data_clk: qup-spi12-data-clk {
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
pins = "gpio32", "gpio33",
"gpio34";
function = "qup12";
};
- qup_spi13_cs: qup-spi13-cs {
+ qup_spi13_cs: qup-spi13-cs-state {
pins = "gpio39";
function = "qup13";
};
- qup_spi13_cs_gpio: qup-spi13-cs-gpio {
+ qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
pins = "gpio39";
function = "gpio";
};
- qup_spi13_data_clk: qup-spi13-data-clk {
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
pins = "gpio36", "gpio37",
"gpio38";
function = "qup13";
};
- qup_spi14_cs: qup-spi14-cs {
+ qup_spi14_cs: qup-spi14-cs-state {
pins = "gpio43";
function = "qup14";
};
- qup_spi14_cs_gpio: qup-spi14-cs-gpio {
+ qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
pins = "gpio43";
function = "gpio";
};
- qup_spi14_data_clk: qup-spi14-data-clk {
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
pins = "gpio40", "gpio41",
"gpio42";
function = "qup14";
};
- qup_spi15_cs: qup-spi15-cs {
+ qup_spi15_cs: qup-spi15-cs-state {
pins = "gpio47";
function = "qup15";
};
- qup_spi15_cs_gpio: qup-spi15-cs-gpio {
+ qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
pins = "gpio47";
function = "gpio";
};
- qup_spi15_data_clk: qup-spi15-data-clk {
+ qup_spi15_data_clk: qup-spi15-data-clk-state {
pins = "gpio44", "gpio45",
"gpio46";
function = "qup15";
};
- qup_spi16_cs: qup-spi16-cs {
+ qup_spi16_cs: qup-spi16-cs-state {
pins = "gpio51";
function = "qup16";
};
- qup_spi16_cs_gpio: qup-spi16-cs-gpio {
+ qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
pins = "gpio51";
function = "gpio";
};
- qup_spi16_data_clk: qup-spi16-data-clk {
+ qup_spi16_data_clk: qup-spi16-data-clk-state {
pins = "gpio48", "gpio49",
"gpio50";
function = "qup16";
};
- qup_spi17_cs: qup-spi17-cs {
+ qup_spi17_cs: qup-spi17-cs-state {
pins = "gpio55";
function = "qup17";
};
- qup_spi17_cs_gpio: qup-spi17-cs-gpio {
+ qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
pins = "gpio55";
function = "gpio";
};
- qup_spi17_data_clk: qup-spi17-data-clk {
+ qup_spi17_data_clk: qup-spi17-data-clk-state {
pins = "gpio52", "gpio53",
"gpio54";
function = "qup17";
};
- qup_spi18_cs: qup-spi18-cs {
+ qup_spi18_cs: qup-spi18-cs-state {
pins = "gpio59";
function = "qup18";
};
- qup_spi18_cs_gpio: qup-spi18-cs-gpio {
+ qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
pins = "gpio59";
function = "gpio";
};
- qup_spi18_data_clk: qup-spi18-data-clk {
+ qup_spi18_data_clk: qup-spi18-data-clk-state {
pins = "gpio56", "gpio57",
"gpio58";
function = "qup18";
};
- qup_spi19_cs: qup-spi19-cs {
+ qup_spi19_cs: qup-spi19-cs-state {
pins = "gpio3";
function = "qup19";
};
- qup_spi19_cs_gpio: qup-spi19-cs-gpio {
+ qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
pins = "gpio3";
function = "gpio";
};
- qup_spi19_data_clk: qup-spi19-data-clk {
+ qup_spi19_data_clk: qup-spi19-data-clk-state {
pins = "gpio0", "gpio1",
"gpio2";
function = "qup19";
};
- qup_uart2_default: qup-uart2-default {
- mux {
- pins = "gpio117", "gpio118";
- function = "qup2";
- };
+ qup_uart2_default: qup-uart2-default-state {
+ pins = "gpio117", "gpio118";
+ function = "qup2";
};
- qup_uart6_default: qup-uart6-default {
- mux {
- pins = "gpio16", "gpio17",
- "gpio18", "gpio19";
- function = "qup6";
- };
+ qup_uart6_default: qup-uart6-default-state {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ function = "qup6";
};
- qup_uart12_default: qup-uart12-default {
- mux {
- pins = "gpio34", "gpio35";
- function = "qup12";
- };
+ qup_uart12_default: qup-uart12-default-state {
+ pins = "gpio34", "gpio35";
+ function = "qup12";
};
- qup_uart17_default: qup-uart17-default {
- mux {
- pins = "gpio52", "gpio53",
- "gpio54", "gpio55";
- function = "qup17";
- };
+ qup_uart17_default: qup-uart17-default-state {
+ pins = "gpio52", "gpio53", "gpio54", "gpio55";
+ function = "qup17";
};
- qup_uart18_default: qup-uart18-default {
- mux {
- pins = "gpio58", "gpio59";
- function = "qup18";
- };
+ qup_uart18_default: qup-uart18-default-state {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
};
- tert_mi2s_active: tert-mi2s-active {
- sck {
+ tert_mi2s_active: tert-mi2s-active-state {
+ sck-pins {
pins = "gpio133";
function = "mi2s2_sck";
drive-strength = <8>;
bias-disable;
};
- data0 {
+ data0-pins {
pins = "gpio134";
function = "mi2s2_data0";
drive-strength = <8>;
@@ -4542,7 +4410,7 @@ data0 {
output-high;
};
- ws {
+ ws-pins {
pins = "gpio135";
function = "mi2s2_ws";
drive-strength = <8>;
@@ -4550,42 +4418,42 @@ ws {
};
};
- sdc2_sleep_state: sdc2-sleep {
- clk {
+ sdc2_sleep_state: sdc2-sleep-state {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
- pcie0_default_state: pcie0-default {
- perst {
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
pins = "gpio79";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
- clkreq {
+ clkreq-pins {
pins = "gpio80";
function = "pci_e0";
drive-strength = <2>;
bias-pull-up;
};
- wake {
+ wake-pins {
pins = "gpio81";
function = "gpio";
drive-strength = <2>;
@@ -4593,22 +4461,22 @@ wake {
};
};
- pcie1_default_state: pcie1-default {
- perst {
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
pins = "gpio82";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
- clkreq {
+ clkreq-pins {
pins = "gpio83";
function = "pci_e1";
drive-strength = <2>;
bias-pull-up;
};
- wake {
+ wake-pins {
pins = "gpio84";
function = "gpio";
drive-strength = <2>;
@@ -4616,22 +4484,22 @@ wake {
};
};
- pcie2_default_state: pcie2-default {
- perst {
+ pcie2_default_state: pcie2-default-state {
+ perst-pins {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
- clkreq {
+ clkreq-pins {
pins = "gpio86";
function = "pci_e2";
drive-strength = <2>;
bias-pull-up;
};
- wake {
+ wake-pins {
pins = "gpio87";
function = "gpio";
drive-strength = <2>;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:33 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema Krzysztof Kozlowski
` (12 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The property to disable bias is "bias-disable".
Fixes: e76c7e1f15fe ("arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 72162852fae7..601a21c381f8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -613,7 +613,7 @@ ts_int_default: ts-int-default-state {
pins = "gpio39";
function = "gpio";
drive-strength = <2>;
- bias-disabled;
+ bias-disable;
input-enable;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:34 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really) Krzysztof Kozlowski
` (11 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sc8280xp-crd.dtb: pinctrl@f100000: kybd-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'disable', 'int-n', 'reset' do not match any of the regexes: 'pinctrl-[0-9]+'
'disable', 'int-n', 'reset' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 12 ++++++------
.../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 12 ++++++------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index fea7d8273ccd..a2027f1d1d04 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -374,19 +374,19 @@ &tlmm {
gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
kybd_default: kybd-default-state {
- disable {
+ disable-pins {
pins = "gpio102";
function = "gpio";
output-low;
};
- int-n {
+ int-n-pins {
pins = "gpio104";
function = "gpio";
bias-disable;
};
- reset {
+ reset-pins {
pins = "gpio105";
function = "gpio";
bias-disable;
@@ -410,7 +410,7 @@ qup2_i2c5_default: qup2-i2c5-default-state {
};
tpad_default: tpad-default-state {
- int-n {
+ int-n-pins {
pins = "gpio182";
function = "gpio";
bias-disable;
@@ -418,13 +418,13 @@ int-n {
};
ts0_default: ts0-default-state {
- int-n {
+ int-n-pins {
pins = "gpio175";
function = "gpio";
bias-disable;
};
- reset-n {
+ reset-n-pins {
pins = "gpio99";
function = "gpio";
output-high;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index b2b744bb8a53..68b61e8d03c0 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -350,19 +350,19 @@ &tlmm {
gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
kybd_default: kybd-default-state {
- disable {
+ disable-pins {
pins = "gpio102";
function = "gpio";
output-low;
};
- int-n {
+ int-n-pins {
pins = "gpio104";
function = "gpio";
bias-disable;
};
- reset {
+ reset-pins {
pins = "gpio105";
function = "gpio";
bias-disable;
@@ -384,7 +384,7 @@ qup2_i2c5_default: qup2-i2c5-default-state {
};
tpad_default: tpad-default-state {
- int-n {
+ int-n-pins {
pins = "gpio182";
function = "gpio";
bias-disable;
@@ -392,13 +392,13 @@ int-n {
};
ts0_default: ts0-default-state {
- int-n {
+ int-n-pins {
pins = "gpio175";
function = "gpio";
bias-disable;
};
- reset-n {
+ reset-n-pins {
pins = "gpio99";
function = "gpio";
output-high;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really)
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (2 preceding siblings ...)
2022-09-25 11:05 ` [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:36 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names Krzysztof Kozlowski
` (10 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
I already tried to do this in commit d801357a0573 ("arm64: dts: qcom:
sc7280: align TLMM pin configuration with DT schema") and I missed the
fact that these nodes were not part of "state" node. Bindings did not
catch these errors due to its own issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 8 +-
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 44 +--
.../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 26 +-
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 20 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 316 +++++++++---------
6 files changed, 211 insertions(+), 211 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index dddb505e220b..1185141f348e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -118,25 +118,25 @@ &wcd9385 {
};
&tlmm {
- tp_int_odl: tp-int-odl {
+ tp_int_odl: tp-int-odl-state {
pins = "gpio7";
function = "gpio";
bias-disable;
};
- ts_int_l: ts-int-l {
+ ts_int_l: ts-int-l-state {
pins = "gpio55";
function = "gpio";
bias-pull-up;
};
- ts_reset_l: ts-reset-l {
+ ts_reset_l: ts-reset-l-state {
pins = "gpio54";
function = "gpio";
bias-disable;
};
- us_euro_hs_sel: us-euro-hs-sel {
+ us_euro_hs_sel: us-euro-hs-sel-state {
pins = "gpio81";
function = "gpio";
bias-pull-down;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e37160f34..6a9389c40159 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -744,27 +744,27 @@ &tlmm {
pinctrl-names = "default";
pinctrl-0 = <&bios_flash_wp_od>;
- amp_en: amp-en-pins {
+ amp_en: amp-en-state {
pins = "gpio63";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ap_ec_int_l: ap-ec-int-l-pins {
+ ap_ec_int_l: ap-ec-int-l-state {
pins = "gpio18";
function = "gpio";
bias-pull-up;
};
- bios_flash_wp_od: bios-flash-wp-od-pins {
+ bios_flash_wp_od: bios-flash-wp-od-state {
pins = "gpio16";
function = "gpio";
/* Has external pull */
bias-disable;
};
- en_fp_rails: en-fp-rails-pins {
+ en_fp_rails: en-fp-rails-state {
pins = "gpio77";
function = "gpio";
bias-disable;
@@ -772,60 +772,60 @@ en_fp_rails: en-fp-rails-pins {
output-high;
};
- en_pp3300_codec: en-pp3300-codec-pins {
+ en_pp3300_codec: en-pp3300-codec-state {
pins = "gpio105";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- en_pp3300_dx_edp: en-pp3300-dx-edp-pins {
+ en_pp3300_dx_edp: en-pp3300-dx-edp-state {
pins = "gpio80";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- fp_rst_l: fp-rst-l-pins {
+ fp_rst_l: fp-rst-l-state {
pins = "gpio78";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- fp_to_ap_irq_l: fp-to-ap-irq-l-pins {
+ fp_to_ap_irq_l: fp-to-ap-irq-l-state {
pins = "gpio61";
function = "gpio";
/* Has external pullup */
bias-disable;
};
- fpmcu_boot0: fpmcu-boot0-pins {
+ fpmcu_boot0: fpmcu-boot0-state {
pins = "gpio68";
function = "gpio";
bias-disable;
};
- gsc_ap_int_odl: gsc-ap-int-odl-pins {
+ gsc_ap_int_odl: gsc-ap-int-odl-state {
pins = "gpio104";
function = "gpio";
bias-pull-up;
};
- hp_irq: hp-irq-pins {
+ hp_irq: hp-irq-state {
pins = "gpio101";
function = "gpio";
bias-pull-up;
};
- hub_en: hub-en-pins {
+ hub_en: hub-en-state {
pins = "gpio157";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- pe_wake_odl: pe-wake-odl-pins {
+ pe_wake_odl: pe-wake-odl-state {
pins = "gpio3";
function = "gpio";
/* Has external pull */
@@ -834,45 +834,45 @@ pe_wake_odl: pe-wake-odl-pins {
};
/* For ap_spi_fp */
- qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins {
+ qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
pins = "gpio39";
function = "gpio";
output-high;
};
/* For ap_ec_spi */
- qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
pins = "gpio43";
function = "gpio";
output-high;
};
- sar0_irq_odl: sar0-irq-odl-pins {
+ sar0_irq_odl: sar0-irq-odl-state {
pins = "gpio141";
function = "gpio";
bias-pull-up;
};
- sar1_irq_odl: sar1-irq-odl-pins {
+ sar1_irq_odl: sar1-irq-odl-state {
pins = "gpio140";
function = "gpio";
bias-pull-up;
};
- sd_cd_odl: sd-cd-odl-pins {
+ sd_cd_odl: sd-cd-odl-state {
pins = "gpio91";
function = "gpio";
bias-pull-up;
};
- ssd_en: ssd-en-pins {
+ ssd_en: ssd-en-state {
pins = "gpio51";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ssd_rst_l: ssd-rst-l-pins {
+ ssd_rst_l: ssd-rst-l-state {
pins = "gpio2";
function = "gpio";
bias-disable;
@@ -880,14 +880,14 @@ ssd_rst_l: ssd-rst-l-pins {
output-low;
};
- tp_int_odl: tp-int-odl-pins {
+ tp_int_odl: tp-int-odl-state {
pins = "gpio7";
function = "gpio";
/* Has external pullup */
bias-disable;
};
- wf_cam_en: wf-cam-en-pins {
+ wf_cam_en: wf-cam-en-state {
pins = "gpio119";
function = "gpio";
/* Has external pulldown */
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index 7f5143e9bb80..b35f3738933c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -79,26 +79,26 @@ cr50: tpm@0 {
};
&tlmm {
- ap_ec_int_l: ap-ec-int-l-pins {
+ ap_ec_int_l: ap-ec-int-l-state {
pins = "gpio18";
function = "gpio";
input-enable;
bias-pull-up;
};
- h1_ap_int_odl: h1-ap-int-odl-pins {
+ h1_ap_int_odl: h1-ap-int-odl-state {
pins = "gpio104";
function = "gpio";
input-enable;
bias-pull-up;
};
- qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
pins = "gpio43";
output-high;
};
- qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins {
+ qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
pins = "gpio59";
output-high;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cd432a2856a7..11982c14b704 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -747,24 +747,24 @@ &sdc2_data {
};
&tlmm {
- amp_en: amp-en {
+ amp_en: amp-en-state {
pins = "gpio63";
bias-pull-down;
drive-strength = <2>;
};
- bt_en: bt-en-pins {
+ bt_en: bt-en-state {
pins = "gpio85";
function = "gpio";
output-low;
bias-disable;
};
- nvme_pwren: nvme-pwren-pins {
+ nvme_pwren: nvme-pwren-state {
function = "gpio";
};
- pcie1_reset_n: pcie1-reset-n-pins {
+ pcie1_reset_n: pcie1-reset-n-state {
pins = "gpio2";
function = "gpio";
@@ -773,7 +773,7 @@ pcie1_reset_n: pcie1-reset-n-pins {
bias-disable;
};
- pcie1_wake_n: pcie1-wake-n-pins {
+ pcie1_wake_n: pcie1-wake-n-state {
pins = "gpio3";
function = "gpio";
@@ -781,7 +781,7 @@ pcie1_wake_n: pcie1-wake-n-pins {
bias-pull-up;
};
- qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+ qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
@@ -794,7 +794,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
bias-bus-hold;
};
- qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+ qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
@@ -806,7 +806,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
bias-pull-down;
};
- qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+ qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
@@ -816,7 +816,7 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
bias-pull-up;
};
- qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+ qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
@@ -827,25 +827,25 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
bias-pull-up;
};
- sd_cd: sd-cd-pins {
+ sd_cd: sd-cd-state {
pins = "gpio91";
function = "gpio";
bias-pull-up;
};
- sw_ctrl: sw-ctrl-pins {
+ sw_ctrl: sw-ctrl-state {
pins = "gpio86";
function = "gpio";
bias-pull-down;
};
- wcd_reset_n: wcd-reset-n {
+ wcd_reset_n: wcd-reset-n-state {
pins = "gpio83";
function = "gpio";
drive-strength = <8>;
};
- wcd_reset_n_sleep: wcd-reset-n-sleep {
+ wcd_reset_n_sleep: wcd-reset-n-sleep-state {
pins = "gpio83";
function = "gpio";
drive-strength = <8>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4b8c676b0bb1..a42b5878a75f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -595,7 +595,7 @@ pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
};
&tlmm {
- mos_bt_en: mos-bt-en-pins {
+ mos_bt_en: mos-bt-en-state {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
@@ -603,7 +603,7 @@ mos_bt_en: mos-bt-en-pins {
};
/* For mos_bt_uart */
- qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
+ qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
@@ -617,7 +617,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
};
/* For mos_bt_uart */
- qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
+ qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
@@ -630,7 +630,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
};
/* For mos_bt_uart */
- qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
+ qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
@@ -642,7 +642,7 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
};
/* For mos_bt_uart */
- qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
+ qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
@@ -652,32 +652,32 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
bias-pull-up;
};
- ts_int_conn: ts-int-conn-pins {
+ ts_int_conn: ts-int-conn-state {
pins = "gpio55";
function = "gpio";
bias-pull-up;
};
- ts_rst_conn: ts-rst-conn-pins {
+ ts_rst_conn: ts-rst-conn-state {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
};
- us_euro_hs_sel: us-euro-hs-sel {
+ us_euro_hs_sel: us-euro-hs-sel-state {
pins = "gpio81";
function = "gpio";
bias-pull-down;
drive-strength = <2>;
};
- wcd_reset_n: wcd-reset-n {
+ wcd_reset_n: wcd-reset-n-state {
pins = "gpio83";
function = "gpio";
drive-strength = <8>;
};
- wcd_reset_n_sleep: wcd-reset-n-sleep {
+ wcd_reset_n_sleep: wcd-reset-n-sleep-state {
pins = "gpio83";
function = "gpio";
drive-strength = <8>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 28e3fb9992d9..1a603cf61d8b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4253,791 +4253,791 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 175>;
wakeup-parent = <&pdc>;
- dp_hot_plug_det: dp-hot-plug-det-pins {
+ dp_hot_plug_det: dp-hot-plug-det-state {
pins = "gpio47";
function = "dp_hot";
};
- edp_hot_plug_det: edp-hot-plug-det-pins {
+ edp_hot_plug_det: edp-hot-plug-det-state {
pins = "gpio60";
function = "edp_hot";
};
- mi2s0_data0: mi2s0-data0-pins {
+ mi2s0_data0: mi2s0-data0-state {
pins = "gpio98";
function = "mi2s0_data0";
};
- mi2s0_data1: mi2s0-data1-pins {
+ mi2s0_data1: mi2s0-data1-state {
pins = "gpio99";
function = "mi2s0_data1";
};
- mi2s0_mclk: mi2s0-mclk-pins {
+ mi2s0_mclk: mi2s0-mclk-state {
pins = "gpio96";
function = "pri_mi2s";
};
- mi2s0_sclk: mi2s0-sclk-pins {
+ mi2s0_sclk: mi2s0-sclk-state {
pins = "gpio97";
function = "mi2s0_sck";
};
- mi2s0_ws: mi2s0-ws-pins {
+ mi2s0_ws: mi2s0-ws-state {
pins = "gpio100";
function = "mi2s0_ws";
};
- mi2s1_data0: mi2s1-data0-pins {
+ mi2s1_data0: mi2s1-data0-state {
pins = "gpio107";
function = "mi2s1_data0";
};
- mi2s1_sclk: mi2s1-sclk-pins {
+ mi2s1_sclk: mi2s1-sclk-state {
pins = "gpio106";
function = "mi2s1_sck";
};
- mi2s1_ws: mi2s1-ws-pins {
+ mi2s1_ws: mi2s1-ws-state {
pins = "gpio108";
function = "mi2s1_ws";
};
- pcie1_clkreq_n: pcie1-clkreq-n-pins {
+ pcie1_clkreq_n: pcie1-clkreq-n-state {
pins = "gpio79";
function = "pcie1_clkreqn";
};
- qspi_clk: qspi-clk-pins {
+ qspi_clk: qspi-clk-state {
pins = "gpio14";
function = "qspi_clk";
};
- qspi_cs0: qspi-cs0-pins {
+ qspi_cs0: qspi-cs0-state {
pins = "gpio15";
function = "qspi_cs";
};
- qspi_cs1: qspi-cs1-pins {
+ qspi_cs1: qspi-cs1-state {
pins = "gpio19";
function = "qspi_cs";
};
- qspi_data01: qspi-data01-pins {
+ qspi_data01: qspi-data01-state {
pins = "gpio12", "gpio13";
function = "qspi_data";
};
- qspi_data12: qspi-data12-pins {
+ qspi_data12: qspi-data12-state {
pins = "gpio16", "gpio17";
function = "qspi_data";
};
- qup_i2c0_data_clk: qup-i2c0-data-clk-pins {
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
pins = "gpio0", "gpio1";
function = "qup00";
};
- qup_i2c1_data_clk: qup-i2c1-data-clk-pins {
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
pins = "gpio4", "gpio5";
function = "qup01";
};
- qup_i2c2_data_clk: qup-i2c2-data-clk-pins {
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
pins = "gpio8", "gpio9";
function = "qup02";
};
- qup_i2c3_data_clk: qup-i2c3-data-clk-pins {
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
pins = "gpio12", "gpio13";
function = "qup03";
};
- qup_i2c4_data_clk: qup-i2c4-data-clk-pins {
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
pins = "gpio16", "gpio17";
function = "qup04";
};
- qup_i2c5_data_clk: qup-i2c5-data-clk-pins {
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
pins = "gpio20", "gpio21";
function = "qup05";
};
- qup_i2c6_data_clk: qup-i2c6-data-clk-pins {
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
pins = "gpio24", "gpio25";
function = "qup06";
};
- qup_i2c7_data_clk: qup-i2c7-data-clk-pins {
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
pins = "gpio28", "gpio29";
function = "qup07";
};
- qup_i2c8_data_clk: qup-i2c8-data-clk-pins {
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
pins = "gpio32", "gpio33";
function = "qup10";
};
- qup_i2c9_data_clk: qup-i2c9-data-clk-pins {
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
pins = "gpio36", "gpio37";
function = "qup11";
};
- qup_i2c10_data_clk: qup-i2c10-data-clk-pins {
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
pins = "gpio40", "gpio41";
function = "qup12";
};
- qup_i2c11_data_clk: qup-i2c11-data-clk-pins {
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
pins = "gpio44", "gpio45";
function = "qup13";
};
- qup_i2c12_data_clk: qup-i2c12-data-clk-pins {
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
pins = "gpio48", "gpio49";
function = "qup14";
};
- qup_i2c13_data_clk: qup-i2c13-data-clk-pins {
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
pins = "gpio52", "gpio53";
function = "qup15";
};
- qup_i2c14_data_clk: qup-i2c14-data-clk-pins {
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
pins = "gpio56", "gpio57";
function = "qup16";
};
- qup_i2c15_data_clk: qup-i2c15-data-clk-pins {
+ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
pins = "gpio60", "gpio61";
function = "qup17";
};
- qup_spi0_data_clk: qup-spi0-data-clk-pins {
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
pins = "gpio0", "gpio1", "gpio2";
function = "qup00";
};
- qup_spi0_cs: qup-spi0-cs-pins {
+ qup_spi0_cs: qup-spi0-cs-state {
pins = "gpio3";
function = "qup00";
};
- qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins {
+ qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
pins = "gpio3";
function = "gpio";
};
- qup_spi1_data_clk: qup-spi1-data-clk-pins {
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
pins = "gpio4", "gpio5", "gpio6";
function = "qup01";
};
- qup_spi1_cs: qup-spi1-cs-pins {
+ qup_spi1_cs: qup-spi1-cs-state {
pins = "gpio7";
function = "qup01";
};
- qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins {
+ qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
pins = "gpio7";
function = "gpio";
};
- qup_spi2_data_clk: qup-spi2-data-clk-pins {
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
pins = "gpio8", "gpio9", "gpio10";
function = "qup02";
};
- qup_spi2_cs: qup-spi2-cs-pins {
+ qup_spi2_cs: qup-spi2-cs-state {
pins = "gpio11";
function = "qup02";
};
- qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins {
+ qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
pins = "gpio11";
function = "gpio";
};
- qup_spi3_data_clk: qup-spi3-data-clk-pins {
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
pins = "gpio12", "gpio13", "gpio14";
function = "qup03";
};
- qup_spi3_cs: qup-spi3-cs-pins {
+ qup_spi3_cs: qup-spi3-cs-state {
pins = "gpio15";
function = "qup03";
};
- qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins {
+ qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
pins = "gpio15";
function = "gpio";
};
- qup_spi4_data_clk: qup-spi4-data-clk-pins {
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
pins = "gpio16", "gpio17", "gpio18";
function = "qup04";
};
- qup_spi4_cs: qup-spi4-cs-pins {
+ qup_spi4_cs: qup-spi4-cs-state {
pins = "gpio19";
function = "qup04";
};
- qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins {
+ qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
pins = "gpio19";
function = "gpio";
};
- qup_spi5_data_clk: qup-spi5-data-clk-pins {
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
pins = "gpio20", "gpio21", "gpio22";
function = "qup05";
};
- qup_spi5_cs: qup-spi5-cs-pins {
+ qup_spi5_cs: qup-spi5-cs-state {
pins = "gpio23";
function = "qup05";
};
- qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins {
+ qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
pins = "gpio23";
function = "gpio";
};
- qup_spi6_data_clk: qup-spi6-data-clk-pins {
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
pins = "gpio24", "gpio25", "gpio26";
function = "qup06";
};
- qup_spi6_cs: qup-spi6-cs-pins {
+ qup_spi6_cs: qup-spi6-cs-state {
pins = "gpio27";
function = "qup06";
};
- qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins {
+ qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
pins = "gpio27";
function = "gpio";
};
- qup_spi7_data_clk: qup-spi7-data-clk-pins {
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
pins = "gpio28", "gpio29", "gpio30";
function = "qup07";
};
- qup_spi7_cs: qup-spi7-cs-pins {
+ qup_spi7_cs: qup-spi7-cs-state {
pins = "gpio31";
function = "qup07";
};
- qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins {
+ qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
pins = "gpio31";
function = "gpio";
};
- qup_spi8_data_clk: qup-spi8-data-clk-pins {
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
pins = "gpio32", "gpio33", "gpio34";
function = "qup10";
};
- qup_spi8_cs: qup-spi8-cs-pins {
+ qup_spi8_cs: qup-spi8-cs-state {
pins = "gpio35";
function = "qup10";
};
- qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins {
+ qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
pins = "gpio35";
function = "gpio";
};
- qup_spi9_data_clk: qup-spi9-data-clk-pins {
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
pins = "gpio36", "gpio37", "gpio38";
function = "qup11";
};
- qup_spi9_cs: qup-spi9-cs-pins {
+ qup_spi9_cs: qup-spi9-cs-state {
pins = "gpio39";
function = "qup11";
};
- qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins {
+ qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
pins = "gpio39";
function = "gpio";
};
- qup_spi10_data_clk: qup-spi10-data-clk-pins {
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
pins = "gpio40", "gpio41", "gpio42";
function = "qup12";
};
- qup_spi10_cs: qup-spi10-cs-pins {
+ qup_spi10_cs: qup-spi10-cs-state {
pins = "gpio43";
function = "qup12";
};
- qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins {
+ qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
pins = "gpio43";
function = "gpio";
};
- qup_spi11_data_clk: qup-spi11-data-clk-pins {
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
pins = "gpio44", "gpio45", "gpio46";
function = "qup13";
};
- qup_spi11_cs: qup-spi11-cs-pins {
+ qup_spi11_cs: qup-spi11-cs-state {
pins = "gpio47";
function = "qup13";
};
- qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins {
+ qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
pins = "gpio47";
function = "gpio";
};
- qup_spi12_data_clk: qup-spi12-data-clk-pins {
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
pins = "gpio48", "gpio49", "gpio50";
function = "qup14";
};
- qup_spi12_cs: qup-spi12-cs-pins {
+ qup_spi12_cs: qup-spi12-cs-state {
pins = "gpio51";
function = "qup14";
};
- qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins {
+ qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
pins = "gpio51";
function = "gpio";
};
- qup_spi13_data_clk: qup-spi13-data-clk-pins {
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
pins = "gpio52", "gpio53", "gpio54";
function = "qup15";
};
- qup_spi13_cs: qup-spi13-cs-pins {
+ qup_spi13_cs: qup-spi13-cs-state {
pins = "gpio55";
function = "qup15";
};
- qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins {
+ qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
pins = "gpio55";
function = "gpio";
};
- qup_spi14_data_clk: qup-spi14-data-clk-pins {
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
pins = "gpio56", "gpio57", "gpio58";
function = "qup16";
};
- qup_spi14_cs: qup-spi14-cs-pins {
+ qup_spi14_cs: qup-spi14-cs-state {
pins = "gpio59";
function = "qup16";
};
- qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins {
+ qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
pins = "gpio59";
function = "gpio";
};
- qup_spi15_data_clk: qup-spi15-data-clk-pins {
+ qup_spi15_data_clk: qup-spi15-data-clk-state {
pins = "gpio60", "gpio61", "gpio62";
function = "qup17";
};
- qup_spi15_cs: qup-spi15-cs-pins {
+ qup_spi15_cs: qup-spi15-cs-state {
pins = "gpio63";
function = "qup17";
};
- qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins {
+ qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
pins = "gpio63";
function = "gpio";
};
- qup_uart0_cts: qup-uart0-cts-pins {
+ qup_uart0_cts: qup-uart0-cts-state {
pins = "gpio0";
function = "qup00";
};
- qup_uart0_rts: qup-uart0-rts-pins {
+ qup_uart0_rts: qup-uart0-rts-state {
pins = "gpio1";
function = "qup00";
};
- qup_uart0_tx: qup-uart0-tx-pins {
+ qup_uart0_tx: qup-uart0-tx-state {
pins = "gpio2";
function = "qup00";
};
- qup_uart0_rx: qup-uart0-rx-pins {
+ qup_uart0_rx: qup-uart0-rx-state {
pins = "gpio3";
function = "qup00";
};
- qup_uart1_cts: qup-uart1-cts-pins {
+ qup_uart1_cts: qup-uart1-cts-state {
pins = "gpio4";
function = "qup01";
};
- qup_uart1_rts: qup-uart1-rts-pins {
+ qup_uart1_rts: qup-uart1-rts-state {
pins = "gpio5";
function = "qup01";
};
- qup_uart1_tx: qup-uart1-tx-pins {
+ qup_uart1_tx: qup-uart1-tx-state {
pins = "gpio6";
function = "qup01";
};
- qup_uart1_rx: qup-uart1-rx-pins {
+ qup_uart1_rx: qup-uart1-rx-state {
pins = "gpio7";
function = "qup01";
};
- qup_uart2_cts: qup-uart2-cts-pins {
+ qup_uart2_cts: qup-uart2-cts-state {
pins = "gpio8";
function = "qup02";
};
- qup_uart2_rts: qup-uart2-rts-pins {
+ qup_uart2_rts: qup-uart2-rts-state {
pins = "gpio9";
function = "qup02";
};
- qup_uart2_tx: qup-uart2-tx-pins {
+ qup_uart2_tx: qup-uart2-tx-state {
pins = "gpio10";
function = "qup02";
};
- qup_uart2_rx: qup-uart2-rx-pins {
+ qup_uart2_rx: qup-uart2-rx-state {
pins = "gpio11";
function = "qup02";
};
- qup_uart3_cts: qup-uart3-cts-pins {
+ qup_uart3_cts: qup-uart3-cts-state {
pins = "gpio12";
function = "qup03";
};
- qup_uart3_rts: qup-uart3-rts-pins {
+ qup_uart3_rts: qup-uart3-rts-state {
pins = "gpio13";
function = "qup03";
};
- qup_uart3_tx: qup-uart3-tx-pins {
+ qup_uart3_tx: qup-uart3-tx-state {
pins = "gpio14";
function = "qup03";
};
- qup_uart3_rx: qup-uart3-rx-pins {
+ qup_uart3_rx: qup-uart3-rx-state {
pins = "gpio15";
function = "qup03";
};
- qup_uart4_cts: qup-uart4-cts-pins {
+ qup_uart4_cts: qup-uart4-cts-state {
pins = "gpio16";
function = "qup04";
};
- qup_uart4_rts: qup-uart4-rts-pins {
+ qup_uart4_rts: qup-uart4-rts-state {
pins = "gpio17";
function = "qup04";
};
- qup_uart4_tx: qup-uart4-tx-pins {
+ qup_uart4_tx: qup-uart4-tx-state {
pins = "gpio18";
function = "qup04";
};
- qup_uart4_rx: qup-uart4-rx-pins {
+ qup_uart4_rx: qup-uart4-rx-state {
pins = "gpio19";
function = "qup04";
};
- qup_uart5_cts: qup-uart5-cts-pins {
+ qup_uart5_cts: qup-uart5-cts-state {
pins = "gpio20";
function = "qup05";
};
- qup_uart5_rts: qup-uart5-rts-pins {
+ qup_uart5_rts: qup-uart5-rts-state {
pins = "gpio21";
function = "qup05";
};
- qup_uart5_tx: qup-uart5-tx-pins {
+ qup_uart5_tx: qup-uart5-tx-state {
pins = "gpio22";
function = "qup05";
};
- qup_uart5_rx: qup-uart5-rx-pins {
+ qup_uart5_rx: qup-uart5-rx-state {
pins = "gpio23";
function = "qup05";
};
- qup_uart6_cts: qup-uart6-cts-pins {
+ qup_uart6_cts: qup-uart6-cts-state {
pins = "gpio24";
function = "qup06";
};
- qup_uart6_rts: qup-uart6-rts-pins {
+ qup_uart6_rts: qup-uart6-rts-state {
pins = "gpio25";
function = "qup06";
};
- qup_uart6_tx: qup-uart6-tx-pins {
+ qup_uart6_tx: qup-uart6-tx-state {
pins = "gpio26";
function = "qup06";
};
- qup_uart6_rx: qup-uart6-rx-pins {
+ qup_uart6_rx: qup-uart6-rx-state {
pins = "gpio27";
function = "qup06";
};
- qup_uart7_cts: qup-uart7-cts-pins {
+ qup_uart7_cts: qup-uart7-cts-state {
pins = "gpio28";
function = "qup07";
};
- qup_uart7_rts: qup-uart7-rts-pins {
+ qup_uart7_rts: qup-uart7-rts-state {
pins = "gpio29";
function = "qup07";
};
- qup_uart7_tx: qup-uart7-tx-pins {
+ qup_uart7_tx: qup-uart7-tx-state {
pins = "gpio30";
function = "qup07";
};
- qup_uart7_rx: qup-uart7-rx-pins {
+ qup_uart7_rx: qup-uart7-rx-state {
pins = "gpio31";
function = "qup07";
};
- qup_uart8_cts: qup-uart8-cts-pins {
+ qup_uart8_cts: qup-uart8-cts-state {
pins = "gpio32";
function = "qup10";
};
- qup_uart8_rts: qup-uart8-rts-pins {
+ qup_uart8_rts: qup-uart8-rts-state {
pins = "gpio33";
function = "qup10";
};
- qup_uart8_tx: qup-uart8-tx-pins {
+ qup_uart8_tx: qup-uart8-tx-state {
pins = "gpio34";
function = "qup10";
};
- qup_uart8_rx: qup-uart8-rx-pins {
+ qup_uart8_rx: qup-uart8-rx-state {
pins = "gpio35";
function = "qup10";
};
- qup_uart9_cts: qup-uart9-cts-pins {
+ qup_uart9_cts: qup-uart9-cts-state {
pins = "gpio36";
function = "qup11";
};
- qup_uart9_rts: qup-uart9-rts-pins {
+ qup_uart9_rts: qup-uart9-rts-state {
pins = "gpio37";
function = "qup11";
};
- qup_uart9_tx: qup-uart9-tx-pins {
+ qup_uart9_tx: qup-uart9-tx-state {
pins = "gpio38";
function = "qup11";
};
- qup_uart9_rx: qup-uart9-rx-pins {
+ qup_uart9_rx: qup-uart9-rx-state {
pins = "gpio39";
function = "qup11";
};
- qup_uart10_cts: qup-uart10-cts-pins {
+ qup_uart10_cts: qup-uart10-cts-state {
pins = "gpio40";
function = "qup12";
};
- qup_uart10_rts: qup-uart10-rts-pins {
+ qup_uart10_rts: qup-uart10-rts-state {
pins = "gpio41";
function = "qup12";
};
- qup_uart10_tx: qup-uart10-tx-pins {
+ qup_uart10_tx: qup-uart10-tx-state {
pins = "gpio42";
function = "qup12";
};
- qup_uart10_rx: qup-uart10-rx-pins {
+ qup_uart10_rx: qup-uart10-rx-state {
pins = "gpio43";
function = "qup12";
};
- qup_uart11_cts: qup-uart11-cts-pins {
+ qup_uart11_cts: qup-uart11-cts-state {
pins = "gpio44";
function = "qup13";
};
- qup_uart11_rts: qup-uart11-rts-pins {
+ qup_uart11_rts: qup-uart11-rts-state {
pins = "gpio45";
function = "qup13";
};
- qup_uart11_tx: qup-uart11-tx-pins {
+ qup_uart11_tx: qup-uart11-tx-state {
pins = "gpio46";
function = "qup13";
};
- qup_uart11_rx: qup-uart11-rx-pins {
+ qup_uart11_rx: qup-uart11-rx-state {
pins = "gpio47";
function = "qup13";
};
- qup_uart12_cts: qup-uart12-cts-pins {
+ qup_uart12_cts: qup-uart12-cts-state {
pins = "gpio48";
function = "qup14";
};
- qup_uart12_rts: qup-uart12-rts-pins {
+ qup_uart12_rts: qup-uart12-rts-state {
pins = "gpio49";
function = "qup14";
};
- qup_uart12_tx: qup-uart12-tx-pins {
+ qup_uart12_tx: qup-uart12-tx-state {
pins = "gpio50";
function = "qup14";
};
- qup_uart12_rx: qup-uart12-rx-pins {
+ qup_uart12_rx: qup-uart12-rx-state {
pins = "gpio51";
function = "qup14";
};
- qup_uart13_cts: qup-uart13-cts-pins {
+ qup_uart13_cts: qup-uart13-cts-state {
pins = "gpio52";
function = "qup15";
};
- qup_uart13_rts: qup-uart13-rts-pins {
+ qup_uart13_rts: qup-uart13-rts-state {
pins = "gpio53";
function = "qup15";
};
- qup_uart13_tx: qup-uart13-tx-pins {
+ qup_uart13_tx: qup-uart13-tx-state {
pins = "gpio54";
function = "qup15";
};
- qup_uart13_rx: qup-uart13-rx-pins {
+ qup_uart13_rx: qup-uart13-rx-state {
pins = "gpio55";
function = "qup15";
};
- qup_uart14_cts: qup-uart14-cts-pins {
+ qup_uart14_cts: qup-uart14-cts-state {
pins = "gpio56";
function = "qup16";
};
- qup_uart14_rts: qup-uart14-rts-pins {
+ qup_uart14_rts: qup-uart14-rts-state {
pins = "gpio57";
function = "qup16";
};
- qup_uart14_tx: qup-uart14-tx-pins {
+ qup_uart14_tx: qup-uart14-tx-state {
pins = "gpio58";
function = "qup16";
};
- qup_uart14_rx: qup-uart14-rx-pins {
+ qup_uart14_rx: qup-uart14-rx-state {
pins = "gpio59";
function = "qup16";
};
- qup_uart15_cts: qup-uart15-cts-pins {
+ qup_uart15_cts: qup-uart15-cts-state {
pins = "gpio60";
function = "qup17";
};
- qup_uart15_rts: qup-uart15-rts-pins {
+ qup_uart15_rts: qup-uart15-rts-state {
pins = "gpio61";
function = "qup17";
};
- qup_uart15_tx: qup-uart15-tx-pins {
+ qup_uart15_tx: qup-uart15-tx-state {
pins = "gpio62";
function = "qup17";
};
- qup_uart15_rx: qup-uart15-rx-pins {
+ qup_uart15_rx: qup-uart15-rx-state {
pins = "gpio63";
function = "qup17";
};
- sdc1_clk: sdc1-clk-pins {
+ sdc1_clk: sdc1-clk-state {
pins = "sdc1_clk";
};
- sdc1_cmd: sdc1-cmd-pins {
+ sdc1_cmd: sdc1-cmd-state {
pins = "sdc1_cmd";
};
- sdc1_data: sdc1-data-pins {
+ sdc1_data: sdc1-data-state {
pins = "sdc1_data";
};
- sdc1_rclk: sdc1-rclk-pins {
+ sdc1_rclk: sdc1-rclk-state {
pins = "sdc1_rclk";
};
- sdc1_clk_sleep: sdc1-clk-sleep-pins {
+ sdc1_clk_sleep: sdc1-clk-sleep-state {
pins = "sdc1_clk";
drive-strength = <2>;
bias-bus-hold;
};
- sdc1_cmd_sleep: sdc1-cmd-sleep-pins {
+ sdc1_cmd_sleep: sdc1-cmd-sleep-state {
pins = "sdc1_cmd";
drive-strength = <2>;
bias-bus-hold;
};
- sdc1_data_sleep: sdc1-data-sleep-pins {
+ sdc1_data_sleep: sdc1-data-sleep-state {
pins = "sdc1_data";
drive-strength = <2>;
bias-bus-hold;
};
- sdc1_rclk_sleep: sdc1-rclk-sleep-pins {
+ sdc1_rclk_sleep: sdc1-rclk-sleep-state {
pins = "sdc1_rclk";
drive-strength = <2>;
bias-bus-hold;
};
- sdc2_clk: sdc2-clk-pins {
+ sdc2_clk: sdc2-clk-state {
pins = "sdc2_clk";
};
- sdc2_cmd: sdc2-cmd-pins {
+ sdc2_cmd: sdc2-cmd-state {
pins = "sdc2_cmd";
};
- sdc2_data: sdc2-data-pins {
+ sdc2_data: sdc2-data-state {
pins = "sdc2_data";
};
- sdc2_clk_sleep: sdc2-clk-sleep-pins {
+ sdc2_clk_sleep: sdc2-clk-sleep-state {
pins = "sdc2_clk";
drive-strength = <2>;
bias-bus-hold;
};
- sdc2_cmd_sleep: sdc2-cmd-sleep-pins {
+ sdc2_cmd_sleep: sdc2-cmd-sleep-state {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-bus-hold;
};
- sdc2_data_sleep: sdc2-data-sleep-pins {
+ sdc2_data_sleep: sdc2-data-sleep-state {
pins = "sdc2_data";
drive-strength = <2>;
bias-bus-hold;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (3 preceding siblings ...)
2022-09-25 11:05 ` [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really) Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:37 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions Krzysztof Kozlowski
` (9 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
There are 175 GPIOs (gpio0-174).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts | 1 -
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 -
arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi | 1 -
4 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index f0f26af1e421..4e0b013e25f4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -372,5 +372,6 @@ &tlmm {
"", /* 170 */
"MOS_BLE_UART_TX",
"MOS_BLE_UART_RX",
+ "",
"";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
index ccbe50b6249a..739e81bd6d68 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
@@ -328,6 +328,5 @@ &tlmm {
"MOS_BLE_UART_TX",
"MOS_BLE_UART_RX",
"",
- "",
"";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index c1a671968725..c8ff13db30b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -358,6 +358,5 @@ &tlmm {
"MOS_BLE_UART_TX",
"MOS_BLE_UART_RX",
"",
- "",
"";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
index 4566722bf4dd..3dff610fb946 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -321,6 +321,5 @@ &tlmm {
"MOS_BLE_UART_TX",
"MOS_BLE_UART_RX",
"",
- "",
"";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (4 preceding siblings ...)
2022-09-25 11:05 ` [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names Krzysztof Kozlowski
@ 2022-09-25 11:05 ` Krzysztof Kozlowski
2022-09-27 12:38 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema Krzysztof Kozlowski
` (8 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:05 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Add default GPIO function to SPI10 and SPI14 chip-select pins on SC7280
IDP, as required by bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index b35f3738933c..3cfeb118d379 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -95,11 +95,13 @@ h1_ap_int_odl: h1-ap-int-odl-state {
qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
pins = "gpio43";
+ function = "gpio";
output-high;
};
qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
pins = "gpio59";
+ function = "gpio";
output-high;
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (5 preceding siblings ...)
2022-09-25 11:05 ` [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-27 12:38 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 08/15] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
` (7 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm632-fairphone-fp3.dtb: pinctrl@1000000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +++++++++++++--------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..db94e6fd18f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -460,229 +460,229 @@ tlmm: pinctrl@1000000 {
interrupt-controller;
#interrupt-cells = <2>;
- uart_console_active: uart-console-active-pins {
+ uart_console_active: uart-console-active-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-disable;
};
- uart_console_sleep: uart-console-sleep-pins {
+ uart_console_sleep: uart-console-sleep-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-down;
};
- sdc1_clk_on: sdc1-clk-on-pins {
+ sdc1_clk_on: sdc1-clk-on-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
- sdc1_clk_off: sdc1-clk-off-pins {
+ sdc1_clk_off: sdc1-clk-off-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
- sdc1_cmd_on: sdc1-cmd-on-pins {
+ sdc1_cmd_on: sdc1-cmd-on-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <10>;
};
- sdc1_cmd_off: sdc1-cmd-off-pins {
+ sdc1_cmd_off: sdc1-cmd-off-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <2>;
};
- sdc1_data_on: sdc1-data-on-pins {
+ sdc1_data_on: sdc1-data-on-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
- sdc1_data_off: sdc1-data-off-pins {
+ sdc1_data_off: sdc1-data-off-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
- sdc1_rclk_on: sdc1-rclk-on-pins {
+ sdc1_rclk_on: sdc1-rclk-on-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc1_rclk_off: sdc1-rclk-off-pins {
+ sdc1_rclk_off: sdc1-rclk-off-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc2_clk_on: sdc2-clk-on-pins {
+ sdc2_clk_on: sdc2-clk-on-state {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
- sdc2_clk_off: sdc2-clk-off-pins {
+ sdc2_clk_off: sdc2-clk-off-state {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
- sdc2_cmd_on: sdc2-cmd-on-pins {
+ sdc2_cmd_on: sdc2-cmd-on-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_cmd_off: sdc2-cmd-off-pins {
+ sdc2_cmd_off: sdc2-cmd-off-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
- sdc2_data_on: sdc2-data-on-pins {
+ sdc2_data_on: sdc2-data-on-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_data_off: sdc2-data-off-pins {
+ sdc2_data_off: sdc2-data-off-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
- sdc2_cd_on: cd-on-pins {
+ sdc2_cd_on: cd-on-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
- sdc2_cd_off: cd-off-pins {
+ sdc2_cd_off: cd-off-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- gpio_key_default: gpio-key-default-pins {
+ gpio_key_default: gpio-key-default-state {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
- i2c_1_default: i2c-1-default-pins {
+ i2c_1_default: i2c-1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- i2c_1_sleep: i2c-1-sleep-pins {
+ i2c_1_sleep: i2c-1-sleep-state {
pins = "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_2_default: i2c-2-default-pins {
+ i2c_2_default: i2c-2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- i2c_2_sleep: i2c-2-sleep-pins {
+ i2c_2_sleep: i2c-2-sleep-state {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_3_default: i2c-3-default-pins {
+ i2c_3_default: i2c-3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
- i2c_3_sleep: i2c-3-sleep-pins {
+ i2c_3_sleep: i2c-3-sleep-state {
pins = "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_4_default: i2c-4-default-pins {
+ i2c_4_default: i2c-4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- i2c_4_sleep: i2c-4-sleep-pins {
+ i2c_4_sleep: i2c-4-sleep-state {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_5_default: i2c-5-default-pins {
+ i2c_5_default: i2c-5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
- i2c_5_sleep: i2c-5-sleep-pins {
+ i2c_5_sleep: i2c-5-sleep-state {
pins = "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_6_default: i2c-6-default-pins {
+ i2c_6_default: i2c-6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
- i2c_6_sleep: i2c-6-sleep-pins {
+ i2c_6_sleep: i2c-6-sleep-state {
pins = "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_7_default: i2c-7-default-pins {
+ i2c_7_default: i2c-7-default-state {
pins = "gpio135", "gpio136";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
- i2c_7_sleep: i2c-7-sleep-pins {
+ i2c_7_sleep: i2c-7-sleep-state {
pins = "gpio135", "gpio136";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_8_default: i2c-8-default-pins {
+ i2c_8_default: i2c-8-default-state {
pins = "gpio98", "gpio99";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
- i2c_8_sleep: i2c-8-sleep-pins {
+ i2c_8_sleep: i2c-8-sleep-state {
pins = "gpio98", "gpio99";
function = "gpio";
drive-strength = <2>;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 08/15] arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (6 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions Krzysztof Kozlowski
` (6 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm845-lg-judyln.dtb: gpios@c000: 'vol-up-active-pins' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 20f275f8694d..1eb423e4be24 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -604,7 +604,7 @@ pinconf {
};
&pm8998_gpio {
- vol_up_pin_a: vol-up-active-pins {
+ vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
input-enable;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (7 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 08/15] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema Krzysztof Kozlowski
` (5 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Add default GPIO function to SD card detect pins on SM6125 Sony Xperia,
as required by bindings:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: sdc2-off-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'cmd-pins', 'data-pins', 'sd-cd-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc4385..9af4b76fa6d7 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -89,6 +89,7 @@ &hsusb_phy1 {
&sdc2_off_state {
sd-cd-pins {
pins = "gpio98";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
@@ -97,6 +98,7 @@ sd-cd-pins {
&sdc2_on_state {
sd-cd-pins {
pins = "gpio98";
+ function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (8 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
` (4 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 1fe3fa3ad877..af49a748e511 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -407,13 +407,13 @@ data-pins {
};
sdc2_on_state: sdc2-on-state {
- clk {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
- cmd-pins-pins {
+ cmd-pins {
pins = "sdc2_cmd";
drive-strength = <10>;
bias-pull-up;
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (9 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-27 12:41 ` Konrad Dybcio
2022-09-29 20:16 ` Rob Herring
2022-09-25 11:06 ` [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config Krzysztof Kozlowski
` (3 subsequent siblings)
14 siblings, 2 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Document common GPIO properties (gpio-reserved-ranges and
gpio-line-names), already used on qrb5165-rb5 board.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index c44d02d28bc9..d7d8e5d3b659 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -49,6 +49,13 @@ properties:
gpio-ranges:
maxItems: 1
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 90
+
+ gpio-line-names:
+ maxItems: 180
+
wakeup-parent: true
#PIN CONFIGURATION NODES
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (10 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-26 8:47 ` Krzysztof Kozlowski
2022-09-25 11:06 ` [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable Krzysztof Kozlowski
` (2 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'. Otherwise the subnodes
(level one and two) are not properly matched. This method also unifies
the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
The change causes indentation decrement, so the diff-hunk looks big, but
there are no functional changes in the subnode "properties" section.
The only difference there is removal of blank lines between common GPIO
pinconf properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 145 +++++++++---------
1 file changed, 75 insertions(+), 70 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index d7d8e5d3b659..da708c748a36 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -58,77 +58,82 @@ properties:
wakeup-parent: true
-#PIN CONFIGURATION NODES
patternProperties:
- '^.*$':
- if:
- type: object
- then:
- properties:
- pins:
- description:
- List of gpio pins affected by the properties specified in this
- subnode.
- items:
- oneOf:
- - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
- - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
- minItems: 1
- maxItems: 36
-
- function:
- description:
- Specify the alternative function to be configured for the specified
- pins.
-
- enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
- ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
- mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
- mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
- pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
- pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
- qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
- qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
- qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
- sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
- tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
- tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
- tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
-
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- bias-pull-down: true
-
- bias-pull-up: true
-
- bias-disable: true
-
- output-high: true
-
- output-low: true
-
- required:
- - pins
-
- allOf:
- - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
- - if:
- properties:
- pins:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
- then:
- required:
- - function
-
- additionalProperties: false
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8250-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ allOf:
+ - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+ - if:
+ properties:
+ pins:
+ pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ then:
+ required:
+ - function
+
+ additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (11 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-29 20:16 ` Rob Herring
2022-09-25 11:06 ` [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable Krzysztof Kozlowski
2022-09-25 11:06 ` [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs Krzysztof Kozlowski
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The SM8250 pinctrl driver supports input-enable and DTS already use it
(sm8250-sony-xperia-edo-pdx203).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index da708c748a36..94f26a5ae3b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -117,6 +117,7 @@ $defs:
bias-pull-down: true
bias-pull-up: true
bias-disable: true
+ input-enable: true
output-high: true
output-low: true
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (12 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-29 20:17 ` Rob Herring
2022-09-25 11:06 ` [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs Krzysztof Kozlowski
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The SC7280 pinctrl driver supports bias-bus-hold and input-enable, and
DTS already use it (sc7280-idp).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 4606ca980dc4..1db05c43d58c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -117,13 +117,11 @@ $defs:
Selects the drive strength for the specified pins, in mA.
bias-pull-down: true
-
bias-pull-up: true
-
+ bias-bus-hold: true
bias-disable: true
-
+ input-enable: true
output-high: true
-
output-low: true
required:
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
` (13 preceding siblings ...)
2022-09-25 11:06 ` [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable Krzysztof Kozlowski
@ 2022-09-25 11:06 ` Krzysztof Kozlowski
2022-09-29 20:17 ` Rob Herring
14 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-25 11:06 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
SC7280 has 175 GPIOs (gpio0-174), so correct size of gpio-line-names and
narrow the pattern for matching pin names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 1db05c43d58c..2a6b5a719d18 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -43,7 +43,7 @@ properties:
maxItems: 1
gpio-line-names:
- maxItems: 174
+ maxItems: 175
wakeup-parent: true
@@ -70,7 +70,7 @@ $defs:
subnode.
items:
oneOf:
- - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
- enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
sdc2_cmd, sdc2_data, ufs_reset ]
minItems: 1
@@ -132,7 +132,7 @@ $defs:
- if:
properties:
pins:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+ pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
then:
required:
- function
--
2.34.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config
2022-09-25 11:06 ` [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config Krzysztof Kozlowski
@ 2022-09-26 8:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-26 8:47 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25/09/2022 13:06, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'. Otherwise the subnodes
> (level one and two) are not properly matched. This method also unifies
> the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
>
> The change causes indentation decrement, so the diff-hunk looks big, but
> there are no functional changes in the subnode "properties" section.
> The only difference there is removal of blank lines between common GPIO
> pinconf properties.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 145 +++++++++---------
> 1 file changed, 75 insertions(+), 70 deletions(-)
>
(...)
> +
> + required:
> + - pins
> +
> + allOf:
> + - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> + - if:
> + properties:
> + pins:
> + pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
> + then:
> + required:
> + - function
In my other patchset, I moved this if:then: to common schema, therefore
this patch will be later rebased. All other patches in the patchset are
free to go, so far.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-27 12:33 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> Drop also unneeded split between mux and config.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 12 +-
> arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 38 +-
> .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 16 +-
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 556 +++++++-----------
> 4 files changed, 239 insertions(+), 383 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index bf8077a1cf9a..62aa32f460ad 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1210,33 +1210,33 @@ &tlmm {
> "HST_WLAN_UART_TX",
> "HST_WLAN_UART_RX";
>
> - lt9611_irq_pin: lt9611-irq {
> + lt9611_irq_pin: lt9611-irq-state {
> pins = "gpio63";
> function = "gpio";
> bias-disable;
> };
>
> - sdc2_default_state: sdc2-default {
> - clk {
> + sdc2_default_state: sdc2-default-state {
> + clk-pins {
> pins = "sdc2_clk";
> bias-disable;
> drive-strength = <16>;
> };
>
> - cmd {
> + cmd-pins {
> pins = "sdc2_cmd";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - data {
> + data-pins {
> pins = "sdc2_data";
> bias-pull-up;
> drive-strength = <10>;
> };
> };
>
> - sdc2_card_det_n: sd-card-det-n {
> + sdc2_card_det_n: sd-card-det-n-state {
> pins = "gpio77";
> function = "gpio";
> bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> index a102aa5efa32..9db6136321b4 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -799,31 +799,19 @@ wcd_tx: wcd9380-tx@0,3 {
> &tlmm {
> gpio-reserved-ranges = <28 4>, <40 4>;
>
> - wcd938x_reset_default: wcd938x_reset_default {
> - mux {
> - pins = "gpio32";
> - function = "gpio";
> - };
> -
> - config {
> - pins = "gpio32";
> - drive-strength = <16>;
> - output-high;
> - };
> - };
> -
> - wcd938x_reset_sleep: wcd938x_reset_sleep {
> - mux {
> - pins = "gpio32";
> - function = "gpio";
> - };
> -
> - config {
> - pins = "gpio32";
> - drive-strength = <16>;
> - bias-disable;
> - output-low;
> - };
> + wcd938x_reset_default: wcd938x-reset-default-state {
> + pins = "gpio32";
> + function = "gpio";
> + drive-strength = <16>;
> + output-high;
> + };
> +
> + wcd938x_reset_sleep: wcd938x-reset-sleep-state {
> + pins = "gpio32";
> + function = "gpio";
> + drive-strength = <16>;
> + bias-disable;
> + output-low;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index 549e0a2aa9fe..72162852fae7 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -582,34 +582,34 @@ &slpi {
> &tlmm {
> gpio-reserved-ranges = <40 4>, <52 4>;
>
> - sdc2_default_state: sdc2-default {
> - clk {
> + sdc2_default_state: sdc2-default-state {
> + clk-pins {
> pins = "sdc2_clk";
> drive-strength = <16>;
> bias-disable;
> };
>
> - cmd {
> + cmd-pins {
> pins = "sdc2_cmd";
> drive-strength = <16>;
> bias-pull-up;
> };
>
> - data {
> + data-pins {
> pins = "sdc2_data";
> drive-strength = <16>;
> bias-pull-up;
> };
> };
>
> - mdm2ap_default: mdm2ap-default {
> + mdm2ap_default: mdm2ap-default-state {
> pins = "gpio1", "gpio3";
> function = "gpio";
> drive-strength = <8>;
> bias-disable;
> };
>
> - ts_int_default: ts-int-default {
> + ts_int_default: ts-int-default-state {
> pins = "gpio39";
> function = "gpio";
> drive-strength = <2>;
> @@ -617,14 +617,14 @@ ts_int_default: ts-int-default {
> input-enable;
> };
>
> - ap2mdm_default: ap2mdm-default {
> + ap2mdm_default: ap2mdm-default-state {
> pins = "gpio56", "gpio57";
> function = "gpio";
> drive-strength = <16>;
> bias-disable;
> };
>
> - sdc2_card_det_n: sd-card-det-n {
> + sdc2_card_det_n: sd-card-det-n-state {
> pins = "gpio77";
> function = "gpio";
> bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e0416d611b66..7eac3ba90c63 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3798,8 +3798,8 @@ tlmm: pinctrl@f100000 {
> gpio-ranges = <&tlmm 0 0 181>;
> wakeup-parent = <&pdc>;
>
> - cci0_default: cci0-default {
> - cci0_i2c0_default: cci0-i2c0-default {
> + cci0_default: cci0-default-state {
> + cci0_i2c0_default: cci0-i2c0-default-pins {
> /* SDA, SCL */
> pins = "gpio101", "gpio102";
> function = "cci_i2c";
> @@ -3808,7 +3808,7 @@ cci0_i2c0_default: cci0-i2c0-default {
> drive-strength = <2>; /* 2 mA */
> };
>
> - cci0_i2c1_default: cci0-i2c1-default {
> + cci0_i2c1_default: cci0-i2c1-default-pins {
> /* SDA, SCL */
> pins = "gpio103", "gpio104";
> function = "cci_i2c";
> @@ -3818,8 +3818,8 @@ cci0_i2c1_default: cci0-i2c1-default {
> };
> };
>
> - cci0_sleep: cci0-sleep {
> - cci0_i2c0_sleep: cci0-i2c0-sleep {
> + cci0_sleep: cci0-sleep-state {
> + cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
> /* SDA, SCL */
> pins = "gpio101", "gpio102";
> function = "cci_i2c";
> @@ -3828,7 +3828,7 @@ cci0_i2c0_sleep: cci0-i2c0-sleep {
> bias-pull-down;
> };
>
> - cci0_i2c1_sleep: cci0-i2c1-sleep {
> + cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
> /* SDA, SCL */
> pins = "gpio103", "gpio104";
> function = "cci_i2c";
> @@ -3838,8 +3838,8 @@ cci0_i2c1_sleep: cci0-i2c1-sleep {
> };
> };
>
> - cci1_default: cci1-default {
> - cci1_i2c0_default: cci1-i2c0-default {
> + cci1_default: cci1-default-state {
> + cci1_i2c0_default: cci1-i2c0-default-pins {
> /* SDA, SCL */
> pins = "gpio105","gpio106";
> function = "cci_i2c";
> @@ -3848,7 +3848,7 @@ cci1_i2c0_default: cci1-i2c0-default {
> drive-strength = <2>; /* 2 mA */
> };
>
> - cci1_i2c1_default: cci1-i2c1-default {
> + cci1_i2c1_default: cci1-i2c1-default-pins {
> /* SDA, SCL */
> pins = "gpio107","gpio108";
> function = "cci_i2c";
> @@ -3858,8 +3858,8 @@ cci1_i2c1_default: cci1-i2c1-default {
> };
> };
>
> - cci1_sleep: cci1-sleep {
> - cci1_i2c0_sleep: cci1-i2c0-sleep {
> + cci1_sleep: cci1-sleep-state {
> + cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
> /* SDA, SCL */
> pins = "gpio105","gpio106";
> function = "cci_i2c";
> @@ -3868,7 +3868,7 @@ cci1_i2c0_sleep: cci1-i2c0-sleep {
> drive-strength = <2>; /* 2 mA */
> };
>
> - cci1_i2c1_sleep: cci1-i2c1-sleep {
> + cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
> /* SDA, SCL */
> pins = "gpio107","gpio108";
> function = "cci_i2c";
> @@ -3878,22 +3878,22 @@ cci1_i2c1_sleep: cci1-i2c1-sleep {
> };
> };
>
> - pri_mi2s_active: pri-mi2s-active {
> - sclk {
> + pri_mi2s_active: pri-mi2s-active-state {
> + sclk-pins {
> pins = "gpio138";
> function = "mi2s0_sck";
> drive-strength = <8>;
> bias-disable;
> };
>
> - ws {
> + ws-pins {
> pins = "gpio141";
> function = "mi2s0_ws";
> drive-strength = <8>;
> output-high;
> };
>
> - data0 {
> + data0-pins {
> pins = "gpio139";
> function = "mi2s0_data0";
> drive-strength = <8>;
> @@ -3901,7 +3901,7 @@ data0 {
> output-high;
> };
>
> - data1 {
> + data1-pins {
> pins = "gpio140";
> function = "mi2s0_data1";
> drive-strength = <8>;
> @@ -3909,632 +3909,500 @@ data1 {
> };
> };
>
> - qup_i2c0_default: qup-i2c0-default {
> - mux {
> - pins = "gpio28", "gpio29";
> - function = "qup0";
> - };
> -
> - config {
> - pins = "gpio28", "gpio29";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c0_default: qup-i2c0-default-state {
> + pins = "gpio28", "gpio29";
> + function = "qup0";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c1_default: qup-i2c1-default {
> - pinmux {
> - pins = "gpio4", "gpio5";
> - function = "qup1";
> - };
> -
> - config {
> - pins = "gpio4", "gpio5";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c1_default: qup-i2c1-default-state {
> + pins = "gpio4", "gpio5";
> + function = "qup1";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c2_default: qup-i2c2-default {
> - mux {
> - pins = "gpio115", "gpio116";
> - function = "qup2";
> - };
> -
> - config {
> - pins = "gpio115", "gpio116";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c2_default: qup-i2c2-default-state {
> + pins = "gpio115", "gpio116";
> + function = "qup2";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c3_default: qup-i2c3-default {
> - mux {
> - pins = "gpio119", "gpio120";
> - function = "qup3";
> - };
> -
> - config {
> - pins = "gpio119", "gpio120";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c3_default: qup-i2c3-default-state {
> + pins = "gpio119", "gpio120";
> + function = "qup3";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c4_default: qup-i2c4-default {
> - mux {
> - pins = "gpio8", "gpio9";
> - function = "qup4";
> - };
> -
> - config {
> - pins = "gpio8", "gpio9";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c4_default: qup-i2c4-default-state {
> + pins = "gpio8", "gpio9";
> + function = "qup4";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c5_default: qup-i2c5-default {
> - mux {
> - pins = "gpio12", "gpio13";
> - function = "qup5";
> - };
> -
> - config {
> - pins = "gpio12", "gpio13";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c5_default: qup-i2c5-default-state {
> + pins = "gpio12", "gpio13";
> + function = "qup5";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c6_default: qup-i2c6-default {
> - mux {
> - pins = "gpio16", "gpio17";
> - function = "qup6";
> - };
> -
> - config {
> - pins = "gpio16", "gpio17";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c6_default: qup-i2c6-default-state {
> + pins = "gpio16", "gpio17";
> + function = "qup6";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c7_default: qup-i2c7-default {
> - mux {
> - pins = "gpio20", "gpio21";
> - function = "qup7";
> - };
> -
> - config {
> - pins = "gpio20", "gpio21";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c7_default: qup-i2c7-default-state {
> + pins = "gpio20", "gpio21";
> + function = "qup7";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c8_default: qup-i2c8-default {
> - mux {
> - pins = "gpio24", "gpio25";
> - function = "qup8";
> - };
> -
> - config {
> - pins = "gpio24", "gpio25";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c8_default: qup-i2c8-default-state {
> + pins = "gpio24", "gpio25";
> + function = "qup8";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c9_default: qup-i2c9-default {
> - mux {
> - pins = "gpio125", "gpio126";
> - function = "qup9";
> - };
> -
> - config {
> - pins = "gpio125", "gpio126";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c9_default: qup-i2c9-default-state {
> + pins = "gpio125", "gpio126";
> + function = "qup9";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c10_default: qup-i2c10-default {
> - mux {
> - pins = "gpio129", "gpio130";
> - function = "qup10";
> - };
> -
> - config {
> - pins = "gpio129", "gpio130";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c10_default: qup-i2c10-default-state {
> + pins = "gpio129", "gpio130";
> + function = "qup10";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c11_default: qup-i2c11-default {
> - mux {
> - pins = "gpio60", "gpio61";
> - function = "qup11";
> - };
> -
> - config {
> - pins = "gpio60", "gpio61";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c11_default: qup-i2c11-default-state {
> + pins = "gpio60", "gpio61";
> + function = "qup11";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c12_default: qup-i2c12-default {
> - mux {
> - pins = "gpio32", "gpio33";
> - function = "qup12";
> - };
> -
> - config {
> - pins = "gpio32", "gpio33";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c12_default: qup-i2c12-default-state {
> + pins = "gpio32", "gpio33";
> + function = "qup12";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c13_default: qup-i2c13-default {
> - mux {
> - pins = "gpio36", "gpio37";
> - function = "qup13";
> - };
> -
> - config {
> - pins = "gpio36", "gpio37";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c13_default: qup-i2c13-default-state {
> + pins = "gpio36", "gpio37";
> + function = "qup13";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c14_default: qup-i2c14-default {
> - mux {
> - pins = "gpio40", "gpio41";
> - function = "qup14";
> - };
> -
> - config {
> - pins = "gpio40", "gpio41";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c14_default: qup-i2c14-default-state {
> + pins = "gpio40", "gpio41";
> + function = "qup14";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c15_default: qup-i2c15-default {
> - mux {
> - pins = "gpio44", "gpio45";
> - function = "qup15";
> - };
> -
> - config {
> - pins = "gpio44", "gpio45";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c15_default: qup-i2c15-default-state {
> + pins = "gpio44", "gpio45";
> + function = "qup15";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c16_default: qup-i2c16-default {
> - mux {
> - pins = "gpio48", "gpio49";
> - function = "qup16";
> - };
> -
> - config {
> - pins = "gpio48", "gpio49";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c16_default: qup-i2c16-default-state {
> + pins = "gpio48", "gpio49";
> + function = "qup16";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c17_default: qup-i2c17-default {
> - mux {
> - pins = "gpio52", "gpio53";
> - function = "qup17";
> - };
> -
> - config {
> - pins = "gpio52", "gpio53";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c17_default: qup-i2c17-default-state {
> + pins = "gpio52", "gpio53";
> + function = "qup17";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c18_default: qup-i2c18-default {
> - mux {
> - pins = "gpio56", "gpio57";
> - function = "qup18";
> - };
> -
> - config {
> - pins = "gpio56", "gpio57";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c18_default: qup-i2c18-default-state {
> + pins = "gpio56", "gpio57";
> + function = "qup18";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_i2c19_default: qup-i2c19-default {
> - mux {
> - pins = "gpio0", "gpio1";
> - function = "qup19";
> - };
> -
> - config {
> - pins = "gpio0", "gpio1";
> - drive-strength = <2>;
> - bias-disable;
> - };
> + qup_i2c19_default: qup-i2c19-default-state {
> + pins = "gpio0", "gpio1";
> + function = "qup19";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi0_cs: qup-spi0-cs {
> + qup_spi0_cs: qup-spi0-cs-state {
> pins = "gpio31";
> function = "qup0";
> };
>
> - qup_spi0_cs_gpio: qup-spi0-cs-gpio {
> + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
> pins = "gpio31";
> function = "gpio";
> };
>
> - qup_spi0_data_clk: qup-spi0-data-clk {
> + qup_spi0_data_clk: qup-spi0-data-clk-state {
> pins = "gpio28", "gpio29",
> "gpio30";
> function = "qup0";
> };
>
> - qup_spi1_cs: qup-spi1-cs {
> + qup_spi1_cs: qup-spi1-cs-state {
> pins = "gpio7";
> function = "qup1";
> };
>
> - qup_spi1_cs_gpio: qup-spi1-cs-gpio {
> + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
> pins = "gpio7";
> function = "gpio";
> };
>
> - qup_spi1_data_clk: qup-spi1-data-clk {
> + qup_spi1_data_clk: qup-spi1-data-clk-state {
> pins = "gpio4", "gpio5",
> "gpio6";
> function = "qup1";
> };
>
> - qup_spi2_cs: qup-spi2-cs {
> + qup_spi2_cs: qup-spi2-cs-state {
> pins = "gpio118";
> function = "qup2";
> };
>
> - qup_spi2_cs_gpio: qup-spi2-cs-gpio {
> + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
> pins = "gpio118";
> function = "gpio";
> };
>
> - qup_spi2_data_clk: qup-spi2-data-clk {
> + qup_spi2_data_clk: qup-spi2-data-clk-state {
> pins = "gpio115", "gpio116",
> "gpio117";
> function = "qup2";
> };
>
> - qup_spi3_cs: qup-spi3-cs {
> + qup_spi3_cs: qup-spi3-cs-state {
> pins = "gpio122";
> function = "qup3";
> };
>
> - qup_spi3_cs_gpio: qup-spi3-cs-gpio {
> + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
> pins = "gpio122";
> function = "gpio";
> };
>
> - qup_spi3_data_clk: qup-spi3-data-clk {
> + qup_spi3_data_clk: qup-spi3-data-clk-state {
> pins = "gpio119", "gpio120",
> "gpio121";
> function = "qup3";
> };
>
> - qup_spi4_cs: qup-spi4-cs {
> + qup_spi4_cs: qup-spi4-cs-state {
> pins = "gpio11";
> function = "qup4";
> };
>
> - qup_spi4_cs_gpio: qup-spi4-cs-gpio {
> + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
> pins = "gpio11";
> function = "gpio";
> };
>
> - qup_spi4_data_clk: qup-spi4-data-clk {
> + qup_spi4_data_clk: qup-spi4-data-clk-state {
> pins = "gpio8", "gpio9",
> "gpio10";
> function = "qup4";
> };
>
> - qup_spi5_cs: qup-spi5-cs {
> + qup_spi5_cs: qup-spi5-cs-state {
> pins = "gpio15";
> function = "qup5";
> };
>
> - qup_spi5_cs_gpio: qup-spi5-cs-gpio {
> + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
> pins = "gpio15";
> function = "gpio";
> };
>
> - qup_spi5_data_clk: qup-spi5-data-clk {
> + qup_spi5_data_clk: qup-spi5-data-clk-state {
> pins = "gpio12", "gpio13",
> "gpio14";
> function = "qup5";
> };
>
> - qup_spi6_cs: qup-spi6-cs {
> + qup_spi6_cs: qup-spi6-cs-state {
> pins = "gpio19";
> function = "qup6";
> };
>
> - qup_spi6_cs_gpio: qup-spi6-cs-gpio {
> + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
> pins = "gpio19";
> function = "gpio";
> };
>
> - qup_spi6_data_clk: qup-spi6-data-clk {
> + qup_spi6_data_clk: qup-spi6-data-clk-state {
> pins = "gpio16", "gpio17",
> "gpio18";
> function = "qup6";
> };
>
> - qup_spi7_cs: qup-spi7-cs {
> + qup_spi7_cs: qup-spi7-cs-state {
> pins = "gpio23";
> function = "qup7";
> };
>
> - qup_spi7_cs_gpio: qup-spi7-cs-gpio {
> + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
> pins = "gpio23";
> function = "gpio";
> };
>
> - qup_spi7_data_clk: qup-spi7-data-clk {
> + qup_spi7_data_clk: qup-spi7-data-clk-state {
> pins = "gpio20", "gpio21",
> "gpio22";
> function = "qup7";
> };
>
> - qup_spi8_cs: qup-spi8-cs {
> + qup_spi8_cs: qup-spi8-cs-state {
> pins = "gpio27";
> function = "qup8";
> };
>
> - qup_spi8_cs_gpio: qup-spi8-cs-gpio {
> + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
> pins = "gpio27";
> function = "gpio";
> };
>
> - qup_spi8_data_clk: qup-spi8-data-clk {
> + qup_spi8_data_clk: qup-spi8-data-clk-state {
> pins = "gpio24", "gpio25",
> "gpio26";
> function = "qup8";
> };
>
> - qup_spi9_cs: qup-spi9-cs {
> + qup_spi9_cs: qup-spi9-cs-state {
> pins = "gpio128";
> function = "qup9";
> };
>
> - qup_spi9_cs_gpio: qup-spi9-cs-gpio {
> + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
> pins = "gpio128";
> function = "gpio";
> };
>
> - qup_spi9_data_clk: qup-spi9-data-clk {
> + qup_spi9_data_clk: qup-spi9-data-clk-state {
> pins = "gpio125", "gpio126",
> "gpio127";
> function = "qup9";
> };
>
> - qup_spi10_cs: qup-spi10-cs {
> + qup_spi10_cs: qup-spi10-cs-state {
> pins = "gpio132";
> function = "qup10";
> };
>
> - qup_spi10_cs_gpio: qup-spi10-cs-gpio {
> + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
> pins = "gpio132";
> function = "gpio";
> };
>
> - qup_spi10_data_clk: qup-spi10-data-clk {
> + qup_spi10_data_clk: qup-spi10-data-clk-state {
> pins = "gpio129", "gpio130",
> "gpio131";
> function = "qup10";
> };
>
> - qup_spi11_cs: qup-spi11-cs {
> + qup_spi11_cs: qup-spi11-cs-state {
> pins = "gpio63";
> function = "qup11";
> };
>
> - qup_spi11_cs_gpio: qup-spi11-cs-gpio {
> + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
> pins = "gpio63";
> function = "gpio";
> };
>
> - qup_spi11_data_clk: qup-spi11-data-clk {
> + qup_spi11_data_clk: qup-spi11-data-clk-state {
> pins = "gpio60", "gpio61",
> "gpio62";
> function = "qup11";
> };
>
> - qup_spi12_cs: qup-spi12-cs {
> + qup_spi12_cs: qup-spi12-cs-state {
> pins = "gpio35";
> function = "qup12";
> };
>
> - qup_spi12_cs_gpio: qup-spi12-cs-gpio {
> + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
> pins = "gpio35";
> function = "gpio";
> };
>
> - qup_spi12_data_clk: qup-spi12-data-clk {
> + qup_spi12_data_clk: qup-spi12-data-clk-state {
> pins = "gpio32", "gpio33",
> "gpio34";
> function = "qup12";
> };
>
> - qup_spi13_cs: qup-spi13-cs {
> + qup_spi13_cs: qup-spi13-cs-state {
> pins = "gpio39";
> function = "qup13";
> };
>
> - qup_spi13_cs_gpio: qup-spi13-cs-gpio {
> + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
> pins = "gpio39";
> function = "gpio";
> };
>
> - qup_spi13_data_clk: qup-spi13-data-clk {
> + qup_spi13_data_clk: qup-spi13-data-clk-state {
> pins = "gpio36", "gpio37",
> "gpio38";
> function = "qup13";
> };
>
> - qup_spi14_cs: qup-spi14-cs {
> + qup_spi14_cs: qup-spi14-cs-state {
> pins = "gpio43";
> function = "qup14";
> };
>
> - qup_spi14_cs_gpio: qup-spi14-cs-gpio {
> + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
> pins = "gpio43";
> function = "gpio";
> };
>
> - qup_spi14_data_clk: qup-spi14-data-clk {
> + qup_spi14_data_clk: qup-spi14-data-clk-state {
> pins = "gpio40", "gpio41",
> "gpio42";
> function = "qup14";
> };
>
> - qup_spi15_cs: qup-spi15-cs {
> + qup_spi15_cs: qup-spi15-cs-state {
> pins = "gpio47";
> function = "qup15";
> };
>
> - qup_spi15_cs_gpio: qup-spi15-cs-gpio {
> + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
> pins = "gpio47";
> function = "gpio";
> };
>
> - qup_spi15_data_clk: qup-spi15-data-clk {
> + qup_spi15_data_clk: qup-spi15-data-clk-state {
> pins = "gpio44", "gpio45",
> "gpio46";
> function = "qup15";
> };
>
> - qup_spi16_cs: qup-spi16-cs {
> + qup_spi16_cs: qup-spi16-cs-state {
> pins = "gpio51";
> function = "qup16";
> };
>
> - qup_spi16_cs_gpio: qup-spi16-cs-gpio {
> + qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
> pins = "gpio51";
> function = "gpio";
> };
>
> - qup_spi16_data_clk: qup-spi16-data-clk {
> + qup_spi16_data_clk: qup-spi16-data-clk-state {
> pins = "gpio48", "gpio49",
> "gpio50";
> function = "qup16";
> };
>
> - qup_spi17_cs: qup-spi17-cs {
> + qup_spi17_cs: qup-spi17-cs-state {
> pins = "gpio55";
> function = "qup17";
> };
>
> - qup_spi17_cs_gpio: qup-spi17-cs-gpio {
> + qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
> pins = "gpio55";
> function = "gpio";
> };
>
> - qup_spi17_data_clk: qup-spi17-data-clk {
> + qup_spi17_data_clk: qup-spi17-data-clk-state {
> pins = "gpio52", "gpio53",
> "gpio54";
> function = "qup17";
> };
>
> - qup_spi18_cs: qup-spi18-cs {
> + qup_spi18_cs: qup-spi18-cs-state {
> pins = "gpio59";
> function = "qup18";
> };
>
> - qup_spi18_cs_gpio: qup-spi18-cs-gpio {
> + qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
> pins = "gpio59";
> function = "gpio";
> };
>
> - qup_spi18_data_clk: qup-spi18-data-clk {
> + qup_spi18_data_clk: qup-spi18-data-clk-state {
> pins = "gpio56", "gpio57",
> "gpio58";
> function = "qup18";
> };
>
> - qup_spi19_cs: qup-spi19-cs {
> + qup_spi19_cs: qup-spi19-cs-state {
> pins = "gpio3";
> function = "qup19";
> };
>
> - qup_spi19_cs_gpio: qup-spi19-cs-gpio {
> + qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
> pins = "gpio3";
> function = "gpio";
> };
>
> - qup_spi19_data_clk: qup-spi19-data-clk {
> + qup_spi19_data_clk: qup-spi19-data-clk-state {
> pins = "gpio0", "gpio1",
> "gpio2";
> function = "qup19";
> };
>
> - qup_uart2_default: qup-uart2-default {
> - mux {
> - pins = "gpio117", "gpio118";
> - function = "qup2";
> - };
> + qup_uart2_default: qup-uart2-default-state {
> + pins = "gpio117", "gpio118";
> + function = "qup2";
> };
>
> - qup_uart6_default: qup-uart6-default {
> - mux {
> - pins = "gpio16", "gpio17",
> - "gpio18", "gpio19";
> - function = "qup6";
> - };
> + qup_uart6_default: qup-uart6-default-state {
> + pins = "gpio16", "gpio17", "gpio18", "gpio19";
> + function = "qup6";
> };
>
> - qup_uart12_default: qup-uart12-default {
> - mux {
> - pins = "gpio34", "gpio35";
> - function = "qup12";
> - };
> + qup_uart12_default: qup-uart12-default-state {
> + pins = "gpio34", "gpio35";
> + function = "qup12";
> };
>
> - qup_uart17_default: qup-uart17-default {
> - mux {
> - pins = "gpio52", "gpio53",
> - "gpio54", "gpio55";
> - function = "qup17";
> - };
> + qup_uart17_default: qup-uart17-default-state {
> + pins = "gpio52", "gpio53", "gpio54", "gpio55";
> + function = "qup17";
> };
>
> - qup_uart18_default: qup-uart18-default {
> - mux {
> - pins = "gpio58", "gpio59";
> - function = "qup18";
> - };
> + qup_uart18_default: qup-uart18-default-state {
> + pins = "gpio58", "gpio59";
> + function = "qup18";
> };
>
> - tert_mi2s_active: tert-mi2s-active {
> - sck {
> + tert_mi2s_active: tert-mi2s-active-state {
> + sck-pins {
> pins = "gpio133";
> function = "mi2s2_sck";
> drive-strength = <8>;
> bias-disable;
> };
>
> - data0 {
> + data0-pins {
> pins = "gpio134";
> function = "mi2s2_data0";
> drive-strength = <8>;
> @@ -4542,7 +4410,7 @@ data0 {
> output-high;
> };
>
> - ws {
> + ws-pins {
> pins = "gpio135";
> function = "mi2s2_ws";
> drive-strength = <8>;
> @@ -4550,42 +4418,42 @@ ws {
> };
> };
>
> - sdc2_sleep_state: sdc2-sleep {
> - clk {
> + sdc2_sleep_state: sdc2-sleep-state {
> + clk-pins {
> pins = "sdc2_clk";
> drive-strength = <2>;
> bias-disable;
> };
>
> - cmd {
> + cmd-pins {
> pins = "sdc2_cmd";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - data {
> + data-pins {
> pins = "sdc2_data";
> drive-strength = <2>;
> bias-pull-up;
> };
> };
>
> - pcie0_default_state: pcie0-default {
> - perst {
> + pcie0_default_state: pcie0-default-state {
> + perst-pins {
> pins = "gpio79";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - clkreq {
> + clkreq-pins {
> pins = "gpio80";
> function = "pci_e0";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - wake {
> + wake-pins {
> pins = "gpio81";
> function = "gpio";
> drive-strength = <2>;
> @@ -4593,22 +4461,22 @@ wake {
> };
> };
>
> - pcie1_default_state: pcie1-default {
> - perst {
> + pcie1_default_state: pcie1-default-state {
> + perst-pins {
> pins = "gpio82";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - clkreq {
> + clkreq-pins {
> pins = "gpio83";
> function = "pci_e1";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - wake {
> + wake-pins {
> pins = "gpio84";
> function = "gpio";
> drive-strength = <2>;
> @@ -4616,22 +4484,22 @@ wake {
> };
> };
>
> - pcie2_default_state: pcie2-default {
> - perst {
> + pcie2_default_state: pcie2-default-state {
> + perst-pins {
> pins = "gpio85";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - clkreq {
> + clkreq-pins {
> pins = "gpio86";
> function = "pci_e2";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - wake {
> + wake-pins {
> pins = "gpio87";
> function = "gpio";
> drive-strength = <2>;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
2022-09-25 11:05 ` [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Krzysztof Kozlowski
@ 2022-09-27 12:33 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> The property to disable bias is "bias-disable".
>
> Fixes: e76c7e1f15fe ("arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index 72162852fae7..601a21c381f8 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -613,7 +613,7 @@ ts_int_default: ts-int-default-state {
> pins = "gpio39";
> function = "gpio";
> drive-strength = <2>;
> - bias-disabled;
> + bias-disable;
> input-enable;
> };
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema
2022-09-25 11:05 ` [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-27 12:34 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> qcom/sc8280xp-crd.dtb: pinctrl@f100000: kybd-default-state: 'oneOf' conditional failed, one must be fixed:
> 'pins' is a required property
> 'function' is a required property
> 'disable', 'int-n', 'reset' do not match any of the regexes: 'pinctrl-[0-9]+'
> 'disable', 'int-n', 'reset' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 12 ++++++------
> .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 12 ++++++------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index fea7d8273ccd..a2027f1d1d04 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -374,19 +374,19 @@ &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> kybd_default: kybd-default-state {
> - disable {
> + disable-pins {
> pins = "gpio102";
> function = "gpio";
> output-low;
> };
>
> - int-n {
> + int-n-pins {
> pins = "gpio104";
> function = "gpio";
> bias-disable;
> };
>
> - reset {
> + reset-pins {
> pins = "gpio105";
> function = "gpio";
> bias-disable;
> @@ -410,7 +410,7 @@ qup2_i2c5_default: qup2-i2c5-default-state {
> };
>
> tpad_default: tpad-default-state {
> - int-n {
> + int-n-pins {
> pins = "gpio182";
> function = "gpio";
> bias-disable;
> @@ -418,13 +418,13 @@ int-n {
> };
>
> ts0_default: ts0-default-state {
> - int-n {
> + int-n-pins {
> pins = "gpio175";
> function = "gpio";
> bias-disable;
> };
>
> - reset-n {
> + reset-n-pins {
> pins = "gpio99";
> function = "gpio";
> output-high;
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index b2b744bb8a53..68b61e8d03c0 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -350,19 +350,19 @@ &tlmm {
> gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> kybd_default: kybd-default-state {
> - disable {
> + disable-pins {
> pins = "gpio102";
> function = "gpio";
> output-low;
> };
>
> - int-n {
> + int-n-pins {
> pins = "gpio104";
> function = "gpio";
> bias-disable;
> };
>
> - reset {
> + reset-pins {
> pins = "gpio105";
> function = "gpio";
> bias-disable;
> @@ -384,7 +384,7 @@ qup2_i2c5_default: qup2-i2c5-default-state {
> };
>
> tpad_default: tpad-default-state {
> - int-n {
> + int-n-pins {
> pins = "gpio182";
> function = "gpio";
> bias-disable;
> @@ -392,13 +392,13 @@ int-n {
> };
>
> ts0_default: ts0-default-state {
> - int-n {
> + int-n-pins {
> pins = "gpio175";
> function = "gpio";
> bias-disable;
> };
>
> - reset-n {
> + reset-n-pins {
> pins = "gpio99";
> function = "gpio";
> output-high;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really)
2022-09-25 11:05 ` [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really) Krzysztof Kozlowski
@ 2022-09-27 12:36 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:36 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> I already tried to do this in commit d801357a0573 ("arm64: dts: qcom:
> sc7280: align TLMM pin configuration with DT schema") and I missed the
> fact that these nodes were not part of "state" node. Bindings did not
> catch these errors due to its own issues.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 8 +-
> .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 44 +--
> .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 8 +-
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 26 +-
> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 20 +-
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 316 +++++++++---------
> 6 files changed, 211 insertions(+), 211 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
> index dddb505e220b..1185141f348e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
> @@ -118,25 +118,25 @@ &wcd9385 {
> };
>
> &tlmm {
> - tp_int_odl: tp-int-odl {
> + tp_int_odl: tp-int-odl-state {
> pins = "gpio7";
> function = "gpio";
> bias-disable;
> };
>
> - ts_int_l: ts-int-l {
> + ts_int_l: ts-int-l-state {
> pins = "gpio55";
> function = "gpio";
> bias-pull-up;
> };
>
> - ts_reset_l: ts-reset-l {
> + ts_reset_l: ts-reset-l-state {
> pins = "gpio54";
> function = "gpio";
> bias-disable;
> };
>
> - us_euro_hs_sel: us-euro-hs-sel {
> + us_euro_hs_sel: us-euro-hs-sel-state {
> pins = "gpio81";
> function = "gpio";
> bias-pull-down;
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index c11e37160f34..6a9389c40159 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -744,27 +744,27 @@ &tlmm {
> pinctrl-names = "default";
> pinctrl-0 = <&bios_flash_wp_od>;
>
> - amp_en: amp-en-pins {
> + amp_en: amp-en-state {
> pins = "gpio63";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - ap_ec_int_l: ap-ec-int-l-pins {
> + ap_ec_int_l: ap-ec-int-l-state {
> pins = "gpio18";
> function = "gpio";
> bias-pull-up;
> };
>
> - bios_flash_wp_od: bios-flash-wp-od-pins {
> + bios_flash_wp_od: bios-flash-wp-od-state {
> pins = "gpio16";
> function = "gpio";
> /* Has external pull */
> bias-disable;
> };
>
> - en_fp_rails: en-fp-rails-pins {
> + en_fp_rails: en-fp-rails-state {
> pins = "gpio77";
> function = "gpio";
> bias-disable;
> @@ -772,60 +772,60 @@ en_fp_rails: en-fp-rails-pins {
> output-high;
> };
>
> - en_pp3300_codec: en-pp3300-codec-pins {
> + en_pp3300_codec: en-pp3300-codec-state {
> pins = "gpio105";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - en_pp3300_dx_edp: en-pp3300-dx-edp-pins {
> + en_pp3300_dx_edp: en-pp3300-dx-edp-state {
> pins = "gpio80";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - fp_rst_l: fp-rst-l-pins {
> + fp_rst_l: fp-rst-l-state {
> pins = "gpio78";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - fp_to_ap_irq_l: fp-to-ap-irq-l-pins {
> + fp_to_ap_irq_l: fp-to-ap-irq-l-state {
> pins = "gpio61";
> function = "gpio";
> /* Has external pullup */
> bias-disable;
> };
>
> - fpmcu_boot0: fpmcu-boot0-pins {
> + fpmcu_boot0: fpmcu-boot0-state {
> pins = "gpio68";
> function = "gpio";
> bias-disable;
> };
>
> - gsc_ap_int_odl: gsc-ap-int-odl-pins {
> + gsc_ap_int_odl: gsc-ap-int-odl-state {
> pins = "gpio104";
> function = "gpio";
> bias-pull-up;
> };
>
> - hp_irq: hp-irq-pins {
> + hp_irq: hp-irq-state {
> pins = "gpio101";
> function = "gpio";
> bias-pull-up;
> };
>
> - hub_en: hub-en-pins {
> + hub_en: hub-en-state {
> pins = "gpio157";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - pe_wake_odl: pe-wake-odl-pins {
> + pe_wake_odl: pe-wake-odl-state {
> pins = "gpio3";
> function = "gpio";
> /* Has external pull */
> @@ -834,45 +834,45 @@ pe_wake_odl: pe-wake-odl-pins {
> };
>
> /* For ap_spi_fp */
> - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins {
> + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
> pins = "gpio39";
> function = "gpio";
> output-high;
> };
>
> /* For ap_ec_spi */
> - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
> + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
> pins = "gpio43";
> function = "gpio";
> output-high;
> };
>
> - sar0_irq_odl: sar0-irq-odl-pins {
> + sar0_irq_odl: sar0-irq-odl-state {
> pins = "gpio141";
> function = "gpio";
> bias-pull-up;
> };
>
> - sar1_irq_odl: sar1-irq-odl-pins {
> + sar1_irq_odl: sar1-irq-odl-state {
> pins = "gpio140";
> function = "gpio";
> bias-pull-up;
> };
>
> - sd_cd_odl: sd-cd-odl-pins {
> + sd_cd_odl: sd-cd-odl-state {
> pins = "gpio91";
> function = "gpio";
> bias-pull-up;
> };
>
> - ssd_en: ssd-en-pins {
> + ssd_en: ssd-en-state {
> pins = "gpio51";
> function = "gpio";
> bias-disable;
> drive-strength = <2>;
> };
>
> - ssd_rst_l: ssd-rst-l-pins {
> + ssd_rst_l: ssd-rst-l-state {
> pins = "gpio2";
> function = "gpio";
> bias-disable;
> @@ -880,14 +880,14 @@ ssd_rst_l: ssd-rst-l-pins {
> output-low;
> };
>
> - tp_int_odl: tp-int-odl-pins {
> + tp_int_odl: tp-int-odl-state {
> pins = "gpio7";
> function = "gpio";
> /* Has external pullup */
> bias-disable;
> };
>
> - wf_cam_en: wf-cam-en-pins {
> + wf_cam_en: wf-cam-en-state {
> pins = "gpio119";
> function = "gpio";
> /* Has external pulldown */
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> index 7f5143e9bb80..b35f3738933c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> @@ -79,26 +79,26 @@ cr50: tpm@0 {
> };
>
> &tlmm {
> - ap_ec_int_l: ap-ec-int-l-pins {
> + ap_ec_int_l: ap-ec-int-l-state {
> pins = "gpio18";
> function = "gpio";
> input-enable;
> bias-pull-up;
> };
>
> - h1_ap_int_odl: h1-ap-int-odl-pins {
> + h1_ap_int_odl: h1-ap-int-odl-state {
> pins = "gpio104";
> function = "gpio";
> input-enable;
> bias-pull-up;
> };
>
> - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
> + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
> pins = "gpio43";
> output-high;
> };
>
> - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins {
> + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
> pins = "gpio59";
> output-high;
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index cd432a2856a7..11982c14b704 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -747,24 +747,24 @@ &sdc2_data {
> };
>
> &tlmm {
> - amp_en: amp-en {
> + amp_en: amp-en-state {
> pins = "gpio63";
> bias-pull-down;
> drive-strength = <2>;
> };
>
> - bt_en: bt-en-pins {
> + bt_en: bt-en-state {
> pins = "gpio85";
> function = "gpio";
> output-low;
> bias-disable;
> };
>
> - nvme_pwren: nvme-pwren-pins {
> + nvme_pwren: nvme-pwren-state {
> function = "gpio";
> };
>
> - pcie1_reset_n: pcie1-reset-n-pins {
> + pcie1_reset_n: pcie1-reset-n-state {
> pins = "gpio2";
> function = "gpio";
>
> @@ -773,7 +773,7 @@ pcie1_reset_n: pcie1-reset-n-pins {
> bias-disable;
> };
>
> - pcie1_wake_n: pcie1-wake-n-pins {
> + pcie1_wake_n: pcie1-wake-n-state {
> pins = "gpio3";
> function = "gpio";
>
> @@ -781,7 +781,7 @@ pcie1_wake_n: pcie1-wake-n-pins {
> bias-pull-up;
> };
>
> - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
> + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
> pins = "gpio28";
> function = "gpio";
> /*
> @@ -794,7 +794,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
> bias-bus-hold;
> };
>
> - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
> + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
> pins = "gpio29";
> function = "gpio";
> /*
> @@ -806,7 +806,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
> bias-pull-down;
> };
>
> - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
> + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
> pins = "gpio30";
> function = "gpio";
> /*
> @@ -816,7 +816,7 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
> bias-pull-up;
> };
>
> - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
> + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
> pins = "gpio31";
> function = "gpio";
> /*
> @@ -827,25 +827,25 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
> bias-pull-up;
> };
>
> - sd_cd: sd-cd-pins {
> + sd_cd: sd-cd-state {
> pins = "gpio91";
> function = "gpio";
> bias-pull-up;
> };
>
> - sw_ctrl: sw-ctrl-pins {
> + sw_ctrl: sw-ctrl-state {
> pins = "gpio86";
> function = "gpio";
> bias-pull-down;
> };
>
> - wcd_reset_n: wcd-reset-n {
> + wcd_reset_n: wcd-reset-n-state {
> pins = "gpio83";
> function = "gpio";
> drive-strength = <8>;
> };
>
> - wcd_reset_n_sleep: wcd-reset-n-sleep {
> + wcd_reset_n_sleep: wcd-reset-n-sleep-state {
> pins = "gpio83";
> function = "gpio";
> drive-strength = <8>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> index 4b8c676b0bb1..a42b5878a75f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> @@ -595,7 +595,7 @@ pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
> };
>
> &tlmm {
> - mos_bt_en: mos-bt-en-pins {
> + mos_bt_en: mos-bt-en-state {
> pins = "gpio85";
> function = "gpio";
> drive-strength = <2>;
> @@ -603,7 +603,7 @@ mos_bt_en: mos-bt-en-pins {
> };
>
> /* For mos_bt_uart */
> - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
> + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
> pins = "gpio28";
> function = "gpio";
> /*
> @@ -617,7 +617,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
> };
>
> /* For mos_bt_uart */
> - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
> + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
> pins = "gpio29";
> function = "gpio";
> /*
> @@ -630,7 +630,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
> };
>
> /* For mos_bt_uart */
> - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
> + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
> pins = "gpio31";
> function = "gpio";
> /*
> @@ -642,7 +642,7 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
> };
>
> /* For mos_bt_uart */
> - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
> + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
> pins = "gpio30";
> function = "gpio";
> /*
> @@ -652,32 +652,32 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
> bias-pull-up;
> };
>
> - ts_int_conn: ts-int-conn-pins {
> + ts_int_conn: ts-int-conn-state {
> pins = "gpio55";
> function = "gpio";
> bias-pull-up;
> };
>
> - ts_rst_conn: ts-rst-conn-pins {
> + ts_rst_conn: ts-rst-conn-state {
> pins = "gpio54";
> function = "gpio";
> drive-strength = <2>;
> };
>
> - us_euro_hs_sel: us-euro-hs-sel {
> + us_euro_hs_sel: us-euro-hs-sel-state {
> pins = "gpio81";
> function = "gpio";
> bias-pull-down;
> drive-strength = <2>;
> };
>
> - wcd_reset_n: wcd-reset-n {
> + wcd_reset_n: wcd-reset-n-state {
> pins = "gpio83";
> function = "gpio";
> drive-strength = <8>;
> };
>
> - wcd_reset_n_sleep: wcd-reset-n-sleep {
> + wcd_reset_n_sleep: wcd-reset-n-sleep-state {
> pins = "gpio83";
> function = "gpio";
> drive-strength = <8>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 28e3fb9992d9..1a603cf61d8b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4253,791 +4253,791 @@ tlmm: pinctrl@f100000 {
> gpio-ranges = <&tlmm 0 0 175>;
> wakeup-parent = <&pdc>;
>
> - dp_hot_plug_det: dp-hot-plug-det-pins {
> + dp_hot_plug_det: dp-hot-plug-det-state {
> pins = "gpio47";
> function = "dp_hot";
> };
>
> - edp_hot_plug_det: edp-hot-plug-det-pins {
> + edp_hot_plug_det: edp-hot-plug-det-state {
> pins = "gpio60";
> function = "edp_hot";
> };
>
> - mi2s0_data0: mi2s0-data0-pins {
> + mi2s0_data0: mi2s0-data0-state {
> pins = "gpio98";
> function = "mi2s0_data0";
> };
>
> - mi2s0_data1: mi2s0-data1-pins {
> + mi2s0_data1: mi2s0-data1-state {
> pins = "gpio99";
> function = "mi2s0_data1";
> };
>
> - mi2s0_mclk: mi2s0-mclk-pins {
> + mi2s0_mclk: mi2s0-mclk-state {
> pins = "gpio96";
> function = "pri_mi2s";
> };
>
> - mi2s0_sclk: mi2s0-sclk-pins {
> + mi2s0_sclk: mi2s0-sclk-state {
> pins = "gpio97";
> function = "mi2s0_sck";
> };
>
> - mi2s0_ws: mi2s0-ws-pins {
> + mi2s0_ws: mi2s0-ws-state {
> pins = "gpio100";
> function = "mi2s0_ws";
> };
>
> - mi2s1_data0: mi2s1-data0-pins {
> + mi2s1_data0: mi2s1-data0-state {
> pins = "gpio107";
> function = "mi2s1_data0";
> };
>
> - mi2s1_sclk: mi2s1-sclk-pins {
> + mi2s1_sclk: mi2s1-sclk-state {
> pins = "gpio106";
> function = "mi2s1_sck";
> };
>
> - mi2s1_ws: mi2s1-ws-pins {
> + mi2s1_ws: mi2s1-ws-state {
> pins = "gpio108";
> function = "mi2s1_ws";
> };
>
> - pcie1_clkreq_n: pcie1-clkreq-n-pins {
> + pcie1_clkreq_n: pcie1-clkreq-n-state {
> pins = "gpio79";
> function = "pcie1_clkreqn";
> };
>
> - qspi_clk: qspi-clk-pins {
> + qspi_clk: qspi-clk-state {
> pins = "gpio14";
> function = "qspi_clk";
> };
>
> - qspi_cs0: qspi-cs0-pins {
> + qspi_cs0: qspi-cs0-state {
> pins = "gpio15";
> function = "qspi_cs";
> };
>
> - qspi_cs1: qspi-cs1-pins {
> + qspi_cs1: qspi-cs1-state {
> pins = "gpio19";
> function = "qspi_cs";
> };
>
> - qspi_data01: qspi-data01-pins {
> + qspi_data01: qspi-data01-state {
> pins = "gpio12", "gpio13";
> function = "qspi_data";
> };
>
> - qspi_data12: qspi-data12-pins {
> + qspi_data12: qspi-data12-state {
> pins = "gpio16", "gpio17";
> function = "qspi_data";
> };
>
> - qup_i2c0_data_clk: qup-i2c0-data-clk-pins {
> + qup_i2c0_data_clk: qup-i2c0-data-clk-state {
> pins = "gpio0", "gpio1";
> function = "qup00";
> };
>
> - qup_i2c1_data_clk: qup-i2c1-data-clk-pins {
> + qup_i2c1_data_clk: qup-i2c1-data-clk-state {
> pins = "gpio4", "gpio5";
> function = "qup01";
> };
>
> - qup_i2c2_data_clk: qup-i2c2-data-clk-pins {
> + qup_i2c2_data_clk: qup-i2c2-data-clk-state {
> pins = "gpio8", "gpio9";
> function = "qup02";
> };
>
> - qup_i2c3_data_clk: qup-i2c3-data-clk-pins {
> + qup_i2c3_data_clk: qup-i2c3-data-clk-state {
> pins = "gpio12", "gpio13";
> function = "qup03";
> };
>
> - qup_i2c4_data_clk: qup-i2c4-data-clk-pins {
> + qup_i2c4_data_clk: qup-i2c4-data-clk-state {
> pins = "gpio16", "gpio17";
> function = "qup04";
> };
>
> - qup_i2c5_data_clk: qup-i2c5-data-clk-pins {
> + qup_i2c5_data_clk: qup-i2c5-data-clk-state {
> pins = "gpio20", "gpio21";
> function = "qup05";
> };
>
> - qup_i2c6_data_clk: qup-i2c6-data-clk-pins {
> + qup_i2c6_data_clk: qup-i2c6-data-clk-state {
> pins = "gpio24", "gpio25";
> function = "qup06";
> };
>
> - qup_i2c7_data_clk: qup-i2c7-data-clk-pins {
> + qup_i2c7_data_clk: qup-i2c7-data-clk-state {
> pins = "gpio28", "gpio29";
> function = "qup07";
> };
>
> - qup_i2c8_data_clk: qup-i2c8-data-clk-pins {
> + qup_i2c8_data_clk: qup-i2c8-data-clk-state {
> pins = "gpio32", "gpio33";
> function = "qup10";
> };
>
> - qup_i2c9_data_clk: qup-i2c9-data-clk-pins {
> + qup_i2c9_data_clk: qup-i2c9-data-clk-state {
> pins = "gpio36", "gpio37";
> function = "qup11";
> };
>
> - qup_i2c10_data_clk: qup-i2c10-data-clk-pins {
> + qup_i2c10_data_clk: qup-i2c10-data-clk-state {
> pins = "gpio40", "gpio41";
> function = "qup12";
> };
>
> - qup_i2c11_data_clk: qup-i2c11-data-clk-pins {
> + qup_i2c11_data_clk: qup-i2c11-data-clk-state {
> pins = "gpio44", "gpio45";
> function = "qup13";
> };
>
> - qup_i2c12_data_clk: qup-i2c12-data-clk-pins {
> + qup_i2c12_data_clk: qup-i2c12-data-clk-state {
> pins = "gpio48", "gpio49";
> function = "qup14";
> };
>
> - qup_i2c13_data_clk: qup-i2c13-data-clk-pins {
> + qup_i2c13_data_clk: qup-i2c13-data-clk-state {
> pins = "gpio52", "gpio53";
> function = "qup15";
> };
>
> - qup_i2c14_data_clk: qup-i2c14-data-clk-pins {
> + qup_i2c14_data_clk: qup-i2c14-data-clk-state {
> pins = "gpio56", "gpio57";
> function = "qup16";
> };
>
> - qup_i2c15_data_clk: qup-i2c15-data-clk-pins {
> + qup_i2c15_data_clk: qup-i2c15-data-clk-state {
> pins = "gpio60", "gpio61";
> function = "qup17";
> };
>
> - qup_spi0_data_clk: qup-spi0-data-clk-pins {
> + qup_spi0_data_clk: qup-spi0-data-clk-state {
> pins = "gpio0", "gpio1", "gpio2";
> function = "qup00";
> };
>
> - qup_spi0_cs: qup-spi0-cs-pins {
> + qup_spi0_cs: qup-spi0-cs-state {
> pins = "gpio3";
> function = "qup00";
> };
>
> - qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins {
> + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
> pins = "gpio3";
> function = "gpio";
> };
>
> - qup_spi1_data_clk: qup-spi1-data-clk-pins {
> + qup_spi1_data_clk: qup-spi1-data-clk-state {
> pins = "gpio4", "gpio5", "gpio6";
> function = "qup01";
> };
>
> - qup_spi1_cs: qup-spi1-cs-pins {
> + qup_spi1_cs: qup-spi1-cs-state {
> pins = "gpio7";
> function = "qup01";
> };
>
> - qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins {
> + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
> pins = "gpio7";
> function = "gpio";
> };
>
> - qup_spi2_data_clk: qup-spi2-data-clk-pins {
> + qup_spi2_data_clk: qup-spi2-data-clk-state {
> pins = "gpio8", "gpio9", "gpio10";
> function = "qup02";
> };
>
> - qup_spi2_cs: qup-spi2-cs-pins {
> + qup_spi2_cs: qup-spi2-cs-state {
> pins = "gpio11";
> function = "qup02";
> };
>
> - qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins {
> + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
> pins = "gpio11";
> function = "gpio";
> };
>
> - qup_spi3_data_clk: qup-spi3-data-clk-pins {
> + qup_spi3_data_clk: qup-spi3-data-clk-state {
> pins = "gpio12", "gpio13", "gpio14";
> function = "qup03";
> };
>
> - qup_spi3_cs: qup-spi3-cs-pins {
> + qup_spi3_cs: qup-spi3-cs-state {
> pins = "gpio15";
> function = "qup03";
> };
>
> - qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins {
> + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
> pins = "gpio15";
> function = "gpio";
> };
>
> - qup_spi4_data_clk: qup-spi4-data-clk-pins {
> + qup_spi4_data_clk: qup-spi4-data-clk-state {
> pins = "gpio16", "gpio17", "gpio18";
> function = "qup04";
> };
>
> - qup_spi4_cs: qup-spi4-cs-pins {
> + qup_spi4_cs: qup-spi4-cs-state {
> pins = "gpio19";
> function = "qup04";
> };
>
> - qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins {
> + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
> pins = "gpio19";
> function = "gpio";
> };
>
> - qup_spi5_data_clk: qup-spi5-data-clk-pins {
> + qup_spi5_data_clk: qup-spi5-data-clk-state {
> pins = "gpio20", "gpio21", "gpio22";
> function = "qup05";
> };
>
> - qup_spi5_cs: qup-spi5-cs-pins {
> + qup_spi5_cs: qup-spi5-cs-state {
> pins = "gpio23";
> function = "qup05";
> };
>
> - qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins {
> + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
> pins = "gpio23";
> function = "gpio";
> };
>
> - qup_spi6_data_clk: qup-spi6-data-clk-pins {
> + qup_spi6_data_clk: qup-spi6-data-clk-state {
> pins = "gpio24", "gpio25", "gpio26";
> function = "qup06";
> };
>
> - qup_spi6_cs: qup-spi6-cs-pins {
> + qup_spi6_cs: qup-spi6-cs-state {
> pins = "gpio27";
> function = "qup06";
> };
>
> - qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins {
> + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
> pins = "gpio27";
> function = "gpio";
> };
>
> - qup_spi7_data_clk: qup-spi7-data-clk-pins {
> + qup_spi7_data_clk: qup-spi7-data-clk-state {
> pins = "gpio28", "gpio29", "gpio30";
> function = "qup07";
> };
>
> - qup_spi7_cs: qup-spi7-cs-pins {
> + qup_spi7_cs: qup-spi7-cs-state {
> pins = "gpio31";
> function = "qup07";
> };
>
> - qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins {
> + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
> pins = "gpio31";
> function = "gpio";
> };
>
> - qup_spi8_data_clk: qup-spi8-data-clk-pins {
> + qup_spi8_data_clk: qup-spi8-data-clk-state {
> pins = "gpio32", "gpio33", "gpio34";
> function = "qup10";
> };
>
> - qup_spi8_cs: qup-spi8-cs-pins {
> + qup_spi8_cs: qup-spi8-cs-state {
> pins = "gpio35";
> function = "qup10";
> };
>
> - qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins {
> + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
> pins = "gpio35";
> function = "gpio";
> };
>
> - qup_spi9_data_clk: qup-spi9-data-clk-pins {
> + qup_spi9_data_clk: qup-spi9-data-clk-state {
> pins = "gpio36", "gpio37", "gpio38";
> function = "qup11";
> };
>
> - qup_spi9_cs: qup-spi9-cs-pins {
> + qup_spi9_cs: qup-spi9-cs-state {
> pins = "gpio39";
> function = "qup11";
> };
>
> - qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins {
> + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
> pins = "gpio39";
> function = "gpio";
> };
>
> - qup_spi10_data_clk: qup-spi10-data-clk-pins {
> + qup_spi10_data_clk: qup-spi10-data-clk-state {
> pins = "gpio40", "gpio41", "gpio42";
> function = "qup12";
> };
>
> - qup_spi10_cs: qup-spi10-cs-pins {
> + qup_spi10_cs: qup-spi10-cs-state {
> pins = "gpio43";
> function = "qup12";
> };
>
> - qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins {
> + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
> pins = "gpio43";
> function = "gpio";
> };
>
> - qup_spi11_data_clk: qup-spi11-data-clk-pins {
> + qup_spi11_data_clk: qup-spi11-data-clk-state {
> pins = "gpio44", "gpio45", "gpio46";
> function = "qup13";
> };
>
> - qup_spi11_cs: qup-spi11-cs-pins {
> + qup_spi11_cs: qup-spi11-cs-state {
> pins = "gpio47";
> function = "qup13";
> };
>
> - qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins {
> + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
> pins = "gpio47";
> function = "gpio";
> };
>
> - qup_spi12_data_clk: qup-spi12-data-clk-pins {
> + qup_spi12_data_clk: qup-spi12-data-clk-state {
> pins = "gpio48", "gpio49", "gpio50";
> function = "qup14";
> };
>
> - qup_spi12_cs: qup-spi12-cs-pins {
> + qup_spi12_cs: qup-spi12-cs-state {
> pins = "gpio51";
> function = "qup14";
> };
>
> - qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins {
> + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
> pins = "gpio51";
> function = "gpio";
> };
>
> - qup_spi13_data_clk: qup-spi13-data-clk-pins {
> + qup_spi13_data_clk: qup-spi13-data-clk-state {
> pins = "gpio52", "gpio53", "gpio54";
> function = "qup15";
> };
>
> - qup_spi13_cs: qup-spi13-cs-pins {
> + qup_spi13_cs: qup-spi13-cs-state {
> pins = "gpio55";
> function = "qup15";
> };
>
> - qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins {
> + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
> pins = "gpio55";
> function = "gpio";
> };
>
> - qup_spi14_data_clk: qup-spi14-data-clk-pins {
> + qup_spi14_data_clk: qup-spi14-data-clk-state {
> pins = "gpio56", "gpio57", "gpio58";
> function = "qup16";
> };
>
> - qup_spi14_cs: qup-spi14-cs-pins {
> + qup_spi14_cs: qup-spi14-cs-state {
> pins = "gpio59";
> function = "qup16";
> };
>
> - qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins {
> + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
> pins = "gpio59";
> function = "gpio";
> };
>
> - qup_spi15_data_clk: qup-spi15-data-clk-pins {
> + qup_spi15_data_clk: qup-spi15-data-clk-state {
> pins = "gpio60", "gpio61", "gpio62";
> function = "qup17";
> };
>
> - qup_spi15_cs: qup-spi15-cs-pins {
> + qup_spi15_cs: qup-spi15-cs-state {
> pins = "gpio63";
> function = "qup17";
> };
>
> - qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins {
> + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
> pins = "gpio63";
> function = "gpio";
> };
>
> - qup_uart0_cts: qup-uart0-cts-pins {
> + qup_uart0_cts: qup-uart0-cts-state {
> pins = "gpio0";
> function = "qup00";
> };
>
> - qup_uart0_rts: qup-uart0-rts-pins {
> + qup_uart0_rts: qup-uart0-rts-state {
> pins = "gpio1";
> function = "qup00";
> };
>
> - qup_uart0_tx: qup-uart0-tx-pins {
> + qup_uart0_tx: qup-uart0-tx-state {
> pins = "gpio2";
> function = "qup00";
> };
>
> - qup_uart0_rx: qup-uart0-rx-pins {
> + qup_uart0_rx: qup-uart0-rx-state {
> pins = "gpio3";
> function = "qup00";
> };
>
> - qup_uart1_cts: qup-uart1-cts-pins {
> + qup_uart1_cts: qup-uart1-cts-state {
> pins = "gpio4";
> function = "qup01";
> };
>
> - qup_uart1_rts: qup-uart1-rts-pins {
> + qup_uart1_rts: qup-uart1-rts-state {
> pins = "gpio5";
> function = "qup01";
> };
>
> - qup_uart1_tx: qup-uart1-tx-pins {
> + qup_uart1_tx: qup-uart1-tx-state {
> pins = "gpio6";
> function = "qup01";
> };
>
> - qup_uart1_rx: qup-uart1-rx-pins {
> + qup_uart1_rx: qup-uart1-rx-state {
> pins = "gpio7";
> function = "qup01";
> };
>
> - qup_uart2_cts: qup-uart2-cts-pins {
> + qup_uart2_cts: qup-uart2-cts-state {
> pins = "gpio8";
> function = "qup02";
> };
>
> - qup_uart2_rts: qup-uart2-rts-pins {
> + qup_uart2_rts: qup-uart2-rts-state {
> pins = "gpio9";
> function = "qup02";
> };
>
> - qup_uart2_tx: qup-uart2-tx-pins {
> + qup_uart2_tx: qup-uart2-tx-state {
> pins = "gpio10";
> function = "qup02";
> };
>
> - qup_uart2_rx: qup-uart2-rx-pins {
> + qup_uart2_rx: qup-uart2-rx-state {
> pins = "gpio11";
> function = "qup02";
> };
>
> - qup_uart3_cts: qup-uart3-cts-pins {
> + qup_uart3_cts: qup-uart3-cts-state {
> pins = "gpio12";
> function = "qup03";
> };
>
> - qup_uart3_rts: qup-uart3-rts-pins {
> + qup_uart3_rts: qup-uart3-rts-state {
> pins = "gpio13";
> function = "qup03";
> };
>
> - qup_uart3_tx: qup-uart3-tx-pins {
> + qup_uart3_tx: qup-uart3-tx-state {
> pins = "gpio14";
> function = "qup03";
> };
>
> - qup_uart3_rx: qup-uart3-rx-pins {
> + qup_uart3_rx: qup-uart3-rx-state {
> pins = "gpio15";
> function = "qup03";
> };
>
> - qup_uart4_cts: qup-uart4-cts-pins {
> + qup_uart4_cts: qup-uart4-cts-state {
> pins = "gpio16";
> function = "qup04";
> };
>
> - qup_uart4_rts: qup-uart4-rts-pins {
> + qup_uart4_rts: qup-uart4-rts-state {
> pins = "gpio17";
> function = "qup04";
> };
>
> - qup_uart4_tx: qup-uart4-tx-pins {
> + qup_uart4_tx: qup-uart4-tx-state {
> pins = "gpio18";
> function = "qup04";
> };
>
> - qup_uart4_rx: qup-uart4-rx-pins {
> + qup_uart4_rx: qup-uart4-rx-state {
> pins = "gpio19";
> function = "qup04";
> };
>
> - qup_uart5_cts: qup-uart5-cts-pins {
> + qup_uart5_cts: qup-uart5-cts-state {
> pins = "gpio20";
> function = "qup05";
> };
>
> - qup_uart5_rts: qup-uart5-rts-pins {
> + qup_uart5_rts: qup-uart5-rts-state {
> pins = "gpio21";
> function = "qup05";
> };
>
> - qup_uart5_tx: qup-uart5-tx-pins {
> + qup_uart5_tx: qup-uart5-tx-state {
> pins = "gpio22";
> function = "qup05";
> };
>
> - qup_uart5_rx: qup-uart5-rx-pins {
> + qup_uart5_rx: qup-uart5-rx-state {
> pins = "gpio23";
> function = "qup05";
> };
>
> - qup_uart6_cts: qup-uart6-cts-pins {
> + qup_uart6_cts: qup-uart6-cts-state {
> pins = "gpio24";
> function = "qup06";
> };
>
> - qup_uart6_rts: qup-uart6-rts-pins {
> + qup_uart6_rts: qup-uart6-rts-state {
> pins = "gpio25";
> function = "qup06";
> };
>
> - qup_uart6_tx: qup-uart6-tx-pins {
> + qup_uart6_tx: qup-uart6-tx-state {
> pins = "gpio26";
> function = "qup06";
> };
>
> - qup_uart6_rx: qup-uart6-rx-pins {
> + qup_uart6_rx: qup-uart6-rx-state {
> pins = "gpio27";
> function = "qup06";
> };
>
> - qup_uart7_cts: qup-uart7-cts-pins {
> + qup_uart7_cts: qup-uart7-cts-state {
> pins = "gpio28";
> function = "qup07";
> };
>
> - qup_uart7_rts: qup-uart7-rts-pins {
> + qup_uart7_rts: qup-uart7-rts-state {
> pins = "gpio29";
> function = "qup07";
> };
>
> - qup_uart7_tx: qup-uart7-tx-pins {
> + qup_uart7_tx: qup-uart7-tx-state {
> pins = "gpio30";
> function = "qup07";
> };
>
> - qup_uart7_rx: qup-uart7-rx-pins {
> + qup_uart7_rx: qup-uart7-rx-state {
> pins = "gpio31";
> function = "qup07";
> };
>
> - qup_uart8_cts: qup-uart8-cts-pins {
> + qup_uart8_cts: qup-uart8-cts-state {
> pins = "gpio32";
> function = "qup10";
> };
>
> - qup_uart8_rts: qup-uart8-rts-pins {
> + qup_uart8_rts: qup-uart8-rts-state {
> pins = "gpio33";
> function = "qup10";
> };
>
> - qup_uart8_tx: qup-uart8-tx-pins {
> + qup_uart8_tx: qup-uart8-tx-state {
> pins = "gpio34";
> function = "qup10";
> };
>
> - qup_uart8_rx: qup-uart8-rx-pins {
> + qup_uart8_rx: qup-uart8-rx-state {
> pins = "gpio35";
> function = "qup10";
> };
>
> - qup_uart9_cts: qup-uart9-cts-pins {
> + qup_uart9_cts: qup-uart9-cts-state {
> pins = "gpio36";
> function = "qup11";
> };
>
> - qup_uart9_rts: qup-uart9-rts-pins {
> + qup_uart9_rts: qup-uart9-rts-state {
> pins = "gpio37";
> function = "qup11";
> };
>
> - qup_uart9_tx: qup-uart9-tx-pins {
> + qup_uart9_tx: qup-uart9-tx-state {
> pins = "gpio38";
> function = "qup11";
> };
>
> - qup_uart9_rx: qup-uart9-rx-pins {
> + qup_uart9_rx: qup-uart9-rx-state {
> pins = "gpio39";
> function = "qup11";
> };
>
> - qup_uart10_cts: qup-uart10-cts-pins {
> + qup_uart10_cts: qup-uart10-cts-state {
> pins = "gpio40";
> function = "qup12";
> };
>
> - qup_uart10_rts: qup-uart10-rts-pins {
> + qup_uart10_rts: qup-uart10-rts-state {
> pins = "gpio41";
> function = "qup12";
> };
>
> - qup_uart10_tx: qup-uart10-tx-pins {
> + qup_uart10_tx: qup-uart10-tx-state {
> pins = "gpio42";
> function = "qup12";
> };
>
> - qup_uart10_rx: qup-uart10-rx-pins {
> + qup_uart10_rx: qup-uart10-rx-state {
> pins = "gpio43";
> function = "qup12";
> };
>
> - qup_uart11_cts: qup-uart11-cts-pins {
> + qup_uart11_cts: qup-uart11-cts-state {
> pins = "gpio44";
> function = "qup13";
> };
>
> - qup_uart11_rts: qup-uart11-rts-pins {
> + qup_uart11_rts: qup-uart11-rts-state {
> pins = "gpio45";
> function = "qup13";
> };
>
> - qup_uart11_tx: qup-uart11-tx-pins {
> + qup_uart11_tx: qup-uart11-tx-state {
> pins = "gpio46";
> function = "qup13";
> };
>
> - qup_uart11_rx: qup-uart11-rx-pins {
> + qup_uart11_rx: qup-uart11-rx-state {
> pins = "gpio47";
> function = "qup13";
> };
>
> - qup_uart12_cts: qup-uart12-cts-pins {
> + qup_uart12_cts: qup-uart12-cts-state {
> pins = "gpio48";
> function = "qup14";
> };
>
> - qup_uart12_rts: qup-uart12-rts-pins {
> + qup_uart12_rts: qup-uart12-rts-state {
> pins = "gpio49";
> function = "qup14";
> };
>
> - qup_uart12_tx: qup-uart12-tx-pins {
> + qup_uart12_tx: qup-uart12-tx-state {
> pins = "gpio50";
> function = "qup14";
> };
>
> - qup_uart12_rx: qup-uart12-rx-pins {
> + qup_uart12_rx: qup-uart12-rx-state {
> pins = "gpio51";
> function = "qup14";
> };
>
> - qup_uart13_cts: qup-uart13-cts-pins {
> + qup_uart13_cts: qup-uart13-cts-state {
> pins = "gpio52";
> function = "qup15";
> };
>
> - qup_uart13_rts: qup-uart13-rts-pins {
> + qup_uart13_rts: qup-uart13-rts-state {
> pins = "gpio53";
> function = "qup15";
> };
>
> - qup_uart13_tx: qup-uart13-tx-pins {
> + qup_uart13_tx: qup-uart13-tx-state {
> pins = "gpio54";
> function = "qup15";
> };
>
> - qup_uart13_rx: qup-uart13-rx-pins {
> + qup_uart13_rx: qup-uart13-rx-state {
> pins = "gpio55";
> function = "qup15";
> };
>
> - qup_uart14_cts: qup-uart14-cts-pins {
> + qup_uart14_cts: qup-uart14-cts-state {
> pins = "gpio56";
> function = "qup16";
> };
>
> - qup_uart14_rts: qup-uart14-rts-pins {
> + qup_uart14_rts: qup-uart14-rts-state {
> pins = "gpio57";
> function = "qup16";
> };
>
> - qup_uart14_tx: qup-uart14-tx-pins {
> + qup_uart14_tx: qup-uart14-tx-state {
> pins = "gpio58";
> function = "qup16";
> };
>
> - qup_uart14_rx: qup-uart14-rx-pins {
> + qup_uart14_rx: qup-uart14-rx-state {
> pins = "gpio59";
> function = "qup16";
> };
>
> - qup_uart15_cts: qup-uart15-cts-pins {
> + qup_uart15_cts: qup-uart15-cts-state {
> pins = "gpio60";
> function = "qup17";
> };
>
> - qup_uart15_rts: qup-uart15-rts-pins {
> + qup_uart15_rts: qup-uart15-rts-state {
> pins = "gpio61";
> function = "qup17";
> };
>
> - qup_uart15_tx: qup-uart15-tx-pins {
> + qup_uart15_tx: qup-uart15-tx-state {
> pins = "gpio62";
> function = "qup17";
> };
>
> - qup_uart15_rx: qup-uart15-rx-pins {
> + qup_uart15_rx: qup-uart15-rx-state {
> pins = "gpio63";
> function = "qup17";
> };
>
> - sdc1_clk: sdc1-clk-pins {
> + sdc1_clk: sdc1-clk-state {
> pins = "sdc1_clk";
> };
>
> - sdc1_cmd: sdc1-cmd-pins {
> + sdc1_cmd: sdc1-cmd-state {
> pins = "sdc1_cmd";
> };
>
> - sdc1_data: sdc1-data-pins {
> + sdc1_data: sdc1-data-state {
> pins = "sdc1_data";
> };
>
> - sdc1_rclk: sdc1-rclk-pins {
> + sdc1_rclk: sdc1-rclk-state {
> pins = "sdc1_rclk";
> };
>
> - sdc1_clk_sleep: sdc1-clk-sleep-pins {
> + sdc1_clk_sleep: sdc1-clk-sleep-state {
> pins = "sdc1_clk";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc1_cmd_sleep: sdc1-cmd-sleep-pins {
> + sdc1_cmd_sleep: sdc1-cmd-sleep-state {
> pins = "sdc1_cmd";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc1_data_sleep: sdc1-data-sleep-pins {
> + sdc1_data_sleep: sdc1-data-sleep-state {
> pins = "sdc1_data";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc1_rclk_sleep: sdc1-rclk-sleep-pins {
> + sdc1_rclk_sleep: sdc1-rclk-sleep-state {
> pins = "sdc1_rclk";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc2_clk: sdc2-clk-pins {
> + sdc2_clk: sdc2-clk-state {
> pins = "sdc2_clk";
> };
>
> - sdc2_cmd: sdc2-cmd-pins {
> + sdc2_cmd: sdc2-cmd-state {
> pins = "sdc2_cmd";
> };
>
> - sdc2_data: sdc2-data-pins {
> + sdc2_data: sdc2-data-state {
> pins = "sdc2_data";
> };
>
> - sdc2_clk_sleep: sdc2-clk-sleep-pins {
> + sdc2_clk_sleep: sdc2-clk-sleep-state {
> pins = "sdc2_clk";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc2_cmd_sleep: sdc2-cmd-sleep-pins {
> + sdc2_cmd_sleep: sdc2-cmd-sleep-state {
> pins = "sdc2_cmd";
> drive-strength = <2>;
> bias-bus-hold;
> };
>
> - sdc2_data_sleep: sdc2-data-sleep-pins {
> + sdc2_data_sleep: sdc2-data-sleep-state {
> pins = "sdc2_data";
> drive-strength = <2>;
> bias-bus-hold;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names
2022-09-25 11:05 ` [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names Krzysztof Kozlowski
@ 2022-09-27 12:37 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:37 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> There are 175 GPIOs (gpio0-174).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts | 1 -
> arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 -
> arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi | 1 -
> 4 files changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index f0f26af1e421..4e0b013e25f4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -372,5 +372,6 @@ &tlmm {
> "", /* 170 */
> "MOS_BLE_UART_TX",
> "MOS_BLE_UART_RX",
> + "",
> "";
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
> index ccbe50b6249a..739e81bd6d68 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
> @@ -328,6 +328,5 @@ &tlmm {
> "MOS_BLE_UART_TX",
> "MOS_BLE_UART_RX",
> "",
> - "",
> "";
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> index c1a671968725..c8ff13db30b9 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> @@ -358,6 +358,5 @@ &tlmm {
> "MOS_BLE_UART_TX",
> "MOS_BLE_UART_RX",
> "",
> - "",
> "";
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
> index 4566722bf4dd..3dff610fb946 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
> @@ -321,6 +321,5 @@ &tlmm {
> "MOS_BLE_UART_TX",
> "MOS_BLE_UART_RX",
> "",
> - "",
> "";
> };
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions
2022-09-25 11:05 ` [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions Krzysztof Kozlowski
@ 2022-09-27 12:38 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:05, Krzysztof Kozlowski wrote:
> Add default GPIO function to SPI10 and SPI14 chip-select pins on SC7280
> IDP, as required by bindings.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> index b35f3738933c..3cfeb118d379 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
> @@ -95,11 +95,13 @@ h1_ap_int_odl: h1-ap-int-odl-state {
>
> qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
> pins = "gpio43";
> + function = "gpio";
> output-high;
> };
>
> qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
> pins = "gpio59";
> + function = "gpio";
> output-high;
> };
> };
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
2022-09-25 11:06 ` [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-27 12:38 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> qcom/sdm632-fairphone-fp3.dtb: pinctrl@1000000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
> do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +++++++++++++--------------
> 1 file changed, 35 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> index 6b992a6d56c1..db94e6fd18f5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> @@ -460,229 +460,229 @@ tlmm: pinctrl@1000000 {
> interrupt-controller;
> #interrupt-cells = <2>;
>
> - uart_console_active: uart-console-active-pins {
> + uart_console_active: uart-console-active-state {
> pins = "gpio4", "gpio5";
> function = "blsp_uart2";
> drive-strength = <2>;
> bias-disable;
> };
>
> - uart_console_sleep: uart-console-sleep-pins {
> + uart_console_sleep: uart-console-sleep-state {
> pins = "gpio4", "gpio5";
> function = "blsp_uart2";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - sdc1_clk_on: sdc1-clk-on-pins {
> + sdc1_clk_on: sdc1-clk-on-state {
> pins = "sdc1_clk";
> bias-disable;
> drive-strength = <16>;
> };
>
> - sdc1_clk_off: sdc1-clk-off-pins {
> + sdc1_clk_off: sdc1-clk-off-state {
> pins = "sdc1_clk";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc1_cmd_on: sdc1-cmd-on-pins {
> + sdc1_cmd_on: sdc1-cmd-on-state {
> pins = "sdc1_cmd";
> bias-disable;
> drive-strength = <10>;
> };
>
> - sdc1_cmd_off: sdc1-cmd-off-pins {
> + sdc1_cmd_off: sdc1-cmd-off-state {
> pins = "sdc1_cmd";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc1_data_on: sdc1-data-on-pins {
> + sdc1_data_on: sdc1-data-on-state {
> pins = "sdc1_data";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc1_data_off: sdc1-data-off-pins {
> + sdc1_data_off: sdc1-data-off-state {
> pins = "sdc1_data";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc1_rclk_on: sdc1-rclk-on-pins {
> + sdc1_rclk_on: sdc1-rclk-on-state {
> pins = "sdc1_rclk";
> bias-pull-down;
> };
>
> - sdc1_rclk_off: sdc1-rclk-off-pins {
> + sdc1_rclk_off: sdc1-rclk-off-state {
> pins = "sdc1_rclk";
> bias-pull-down;
> };
>
> - sdc2_clk_on: sdc2-clk-on-pins {
> + sdc2_clk_on: sdc2-clk-on-state {
> pins = "sdc2_clk";
> drive-strength = <16>;
> bias-disable;
> };
>
> - sdc2_clk_off: sdc2-clk-off-pins {
> + sdc2_clk_off: sdc2-clk-off-state {
> pins = "sdc2_clk";
> bias-disable;
> drive-strength = <2>;
> };
>
> - sdc2_cmd_on: sdc2-cmd-on-pins {
> + sdc2_cmd_on: sdc2-cmd-on-state {
> pins = "sdc2_cmd";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc2_cmd_off: sdc2-cmd-off-pins {
> + sdc2_cmd_off: sdc2-cmd-off-state {
> pins = "sdc2_cmd";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc2_data_on: sdc2-data-on-pins {
> + sdc2_data_on: sdc2-data-on-state {
> pins = "sdc2_data";
> bias-pull-up;
> drive-strength = <10>;
> };
>
> - sdc2_data_off: sdc2-data-off-pins {
> + sdc2_data_off: sdc2-data-off-state {
> pins = "sdc2_data";
> bias-pull-up;
> drive-strength = <2>;
> };
>
> - sdc2_cd_on: cd-on-pins {
> + sdc2_cd_on: cd-on-state {
> pins = "gpio133";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - sdc2_cd_off: cd-off-pins {
> + sdc2_cd_off: cd-off-state {
> pins = "gpio133";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - gpio_key_default: gpio-key-default-pins {
> + gpio_key_default: gpio-key-default-state {
> pins = "gpio85";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - i2c_1_default: i2c-1-default-pins {
> + i2c_1_default: i2c-1-default-state {
> pins = "gpio2", "gpio3";
> function = "blsp_i2c1";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_1_sleep: i2c-1-sleep-pins {
> + i2c_1_sleep: i2c-1-sleep-state {
> pins = "gpio2", "gpio3";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_2_default: i2c-2-default-pins {
> + i2c_2_default: i2c-2-default-state {
> pins = "gpio6", "gpio7";
> function = "blsp_i2c2";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_2_sleep: i2c-2-sleep-pins {
> + i2c_2_sleep: i2c-2-sleep-state {
> pins = "gpio6", "gpio7";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_3_default: i2c-3-default-pins {
> + i2c_3_default: i2c-3-default-state {
> pins = "gpio10", "gpio11";
> function = "blsp_i2c3";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_3_sleep: i2c-3-sleep-pins {
> + i2c_3_sleep: i2c-3-sleep-state {
> pins = "gpio10", "gpio11";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_4_default: i2c-4-default-pins {
> + i2c_4_default: i2c-4-default-state {
> pins = "gpio14", "gpio15";
> function = "blsp_i2c4";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_4_sleep: i2c-4-sleep-pins {
> + i2c_4_sleep: i2c-4-sleep-state {
> pins = "gpio14", "gpio15";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_5_default: i2c-5-default-pins {
> + i2c_5_default: i2c-5-default-state {
> pins = "gpio18", "gpio19";
> function = "blsp_i2c5";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_5_sleep: i2c-5-sleep-pins {
> + i2c_5_sleep: i2c-5-sleep-state {
> pins = "gpio18", "gpio19";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_6_default: i2c-6-default-pins {
> + i2c_6_default: i2c-6-default-state {
> pins = "gpio22", "gpio23";
> function = "blsp_i2c6";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_6_sleep: i2c-6-sleep-pins {
> + i2c_6_sleep: i2c-6-sleep-state {
> pins = "gpio22", "gpio23";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_7_default: i2c-7-default-pins {
> + i2c_7_default: i2c-7-default-state {
> pins = "gpio135", "gpio136";
> function = "blsp_i2c7";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_7_sleep: i2c-7-sleep-pins {
> + i2c_7_sleep: i2c-7-sleep-state {
> pins = "gpio135", "gpio136";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_8_default: i2c-8-default-pins {
> + i2c_8_default: i2c-8-default-state {
> pins = "gpio98", "gpio99";
> function = "blsp_i2c8";
> drive-strength = <2>;
> bias-disable;
> };
>
> - i2c_8_sleep: i2c-8-sleep-pins {
> + i2c_8_sleep: i2c-8-sleep-state {
> pins = "gpio98", "gpio99";
> function = "gpio";
> drive-strength = <2>;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 08/15] arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
2022-09-25 11:06 ` [PATCH 08/15] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
@ 2022-09-27 12:39 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:39 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> qcom/sdm845-lg-judyln.dtb: gpios@c000: 'vol-up-active-pins' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> index 20f275f8694d..1eb423e4be24 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> @@ -604,7 +604,7 @@ pinconf {
> };
>
> &pm8998_gpio {
> - vol_up_pin_a: vol-up-active-pins {
> + vol_up_pin_a: vol-up-active-state {
> pins = "gpio6";
> function = "normal";
> input-enable;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions
2022-09-25 11:06 ` [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions Krzysztof Kozlowski
@ 2022-09-27 12:39 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:39 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> Add default GPIO function to SD card detect pins on SM6125 Sony Xperia,
> as required by bindings:
>
> qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: sdc2-off-state: 'oneOf' conditional failed, one must be fixed:
> 'pins' is a required property
> 'function' is a required property
> 'clk-pins', 'cmd-pins', 'data-pins', 'sd-cd-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 6a8b88cc4385..9af4b76fa6d7 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -89,6 +89,7 @@ &hsusb_phy1 {
> &sdc2_off_state {
> sd-cd-pins {
> pins = "gpio98";
> + function = "gpio";
> drive-strength = <2>;
> bias-disable;
> };
> @@ -97,6 +98,7 @@ sd-cd-pins {
> &sdc2_on_state {
> sd-cd-pins {
> pins = "gpio98";
> + function = "gpio";
> drive-strength = <2>;
> bias-pull-up;
> };
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
2022-09-25 11:06 ` [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-09-27 12:39 ` Konrad Dybcio
0 siblings, 0 replies; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:39 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 1fe3fa3ad877..af49a748e511 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -407,13 +407,13 @@ data-pins {
> };
>
> sdc2_on_state: sdc2-on-state {
> - clk {
> + clk-pins {
> pins = "sdc2_clk";
> drive-strength = <16>;
> bias-disable;
> };
>
> - cmd-pins-pins {
> + cmd-pins {
> pins = "sdc2_cmd";
> drive-strength = <10>;
> bias-pull-up;
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
@ 2022-09-27 12:41 ` Konrad Dybcio
2022-09-27 13:54 ` Krzysztof Kozlowski
2022-09-29 20:16 ` Rob Herring
1 sibling, 1 reply; 33+ messages in thread
From: Konrad Dybcio @ 2022-09-27 12:41 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> Document common GPIO properties (gpio-reserved-ranges and
> gpio-line-names), already used on qrb5165-rb5 board.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> index c44d02d28bc9..d7d8e5d3b659 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> @@ -49,6 +49,13 @@ properties:
> gpio-ranges:
> maxItems: 1
>
> + gpio-reserved-ranges:
> + minItems: 1
Not sure about this.. However, this will apply to 99.9% of boards, so:
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> + maxItems: 90
> +
> + gpio-line-names:
> + maxItems: 180
> +
> wakeup-parent: true
>
> #PIN CONFIGURATION NODES
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names
2022-09-27 12:41 ` Konrad Dybcio
@ 2022-09-27 13:54 ` Krzysztof Kozlowski
0 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-27 13:54 UTC (permalink / raw)
To: Konrad Dybcio, Andy Gross, Bjorn Andersson, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
On 27/09/2022 14:41, Konrad Dybcio wrote:
>
>
> On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
>> Document common GPIO properties (gpio-reserved-ranges and
>> gpio-line-names), already used on qrb5165-rb5 board.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> index c44d02d28bc9..d7d8e5d3b659 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> @@ -49,6 +49,13 @@ properties:
>> gpio-ranges:
>> maxItems: 1
>>
>> + gpio-reserved-ranges:
>> + minItems: 1
> Not sure about this.. However, this will apply to 99.9% of boards, so:
We need some minimum number.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
2022-09-27 12:41 ` Konrad Dybcio
@ 2022-09-29 20:16 ` Rob Herring
1 sibling, 0 replies; 33+ messages in thread
From: Rob Herring @ 2022-09-29 20:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Krzysztof Kozlowski, devicetree, Konrad Dybcio, linux-kernel,
linux-arm-msm, Bjorn Andersson, Rob Herring, Andy Gross,
Linus Walleij, linux-gpio
On Sun, 25 Sep 2022 13:06:04 +0200, Krzysztof Kozlowski wrote:
> Document common GPIO properties (gpio-reserved-ranges and
> gpio-line-names), already used on qrb5165-rb5 board.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable
2022-09-25 11:06 ` [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable Krzysztof Kozlowski
@ 2022-09-29 20:16 ` Rob Herring
0 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2022-09-29 20:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, linux-arm-msm, linux-kernel, Bjorn Andersson,
Konrad Dybcio, devicetree, Krzysztof Kozlowski, linux-gpio,
Andy Gross, Linus Walleij
On Sun, 25 Sep 2022 13:06:06 +0200, Krzysztof Kozlowski wrote:
> The SM8250 pinctrl driver supports input-enable and DTS already use it
> (sm8250-sony-xperia-edo-pdx203).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable
2022-09-25 11:06 ` [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable Krzysztof Kozlowski
@ 2022-09-29 20:17 ` Rob Herring
0 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2022-09-29 20:17 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Linus Walleij, linux-kernel, Bjorn Andersson, Konrad Dybcio,
devicetree, Andy Gross, linux-gpio, linux-arm-msm, Rob Herring,
Krzysztof Kozlowski
On Sun, 25 Sep 2022 13:06:07 +0200, Krzysztof Kozlowski wrote:
> The SC7280 pinctrl driver supports bias-bus-hold and input-enable, and
> DTS already use it (sc7280-idp).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs
2022-09-25 11:06 ` [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs Krzysztof Kozlowski
@ 2022-09-29 20:17 ` Rob Herring
0 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2022-09-29 20:17 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-gpio, Rob Herring, Linus Walleij, linux-arm-msm,
Krzysztof Kozlowski, Konrad Dybcio, Bjorn Andersson, Andy Gross,
linux-kernel, devicetree
On Sun, 25 Sep 2022 13:06:08 +0200, Krzysztof Kozlowski wrote:
> SC7280 has 175 GPIOs (gpio0-174), so correct size of gpio-line-names and
> narrow the pattern for matching pin names.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2022-09-29 20:17 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-25 11:05 [PATCH 00/15] pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings Krzysztof Kozlowski
2022-09-25 11:05 ` [PATCH 01/15] arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:33 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 02/15] arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable Krzysztof Kozlowski
2022-09-27 12:33 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 03/15] arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:34 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 04/15] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really) Krzysztof Kozlowski
2022-09-27 12:36 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 05/15] arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names Krzysztof Kozlowski
2022-09-27 12:37 ` Konrad Dybcio
2022-09-25 11:05 ` [PATCH 06/15] arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions Krzysztof Kozlowski
2022-09-27 12:38 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 07/15] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:38 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 08/15] arm64: dts: qcom: sdm845: " Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 09/15] arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 10/15] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-09-27 12:39 ` Konrad Dybcio
2022-09-25 11:06 ` [PATCH 11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names Krzysztof Kozlowski
2022-09-27 12:41 ` Konrad Dybcio
2022-09-27 13:54 ` Krzysztof Kozlowski
2022-09-29 20:16 ` Rob Herring
2022-09-25 11:06 ` [PATCH 12/15] dt-bindings: pinctrl: qcom,sm8250: fix matching pin config Krzysztof Kozlowski
2022-09-26 8:47 ` Krzysztof Kozlowski
2022-09-25 11:06 ` [PATCH 13/15] dt-bindings: pinctrl: qcom,sm8250: add input-enable Krzysztof Kozlowski
2022-09-29 20:16 ` Rob Herring
2022-09-25 11:06 ` [PATCH 14/15] dt-bindings: pinctrl: qcom,sc7280: add bias-bus-hold and input-enable Krzysztof Kozlowski
2022-09-29 20:17 ` Rob Herring
2022-09-25 11:06 ` [PATCH 15/15] dt-bindings: pinctrl: qcom,sc7280: correct number of GPIOs Krzysztof Kozlowski
2022-09-29 20:17 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).