* [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
@ 2022-11-27 20:32 Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 2/3] arm64: dts: qcom: align LED node names with dtschema Krzysztof Kozlowski
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-11-27 20:32 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The preferred name suffix for properties with single and multiple GPIOs
is "gpios". Linux GPIO core code supports both. Bindings are going to
expect the "gpios" one:
qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index d8734913482f..dbd5f7e2df65 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -54,7 +54,7 @@ lp5562@30 {
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
- enable-gpio = <&pm8994_gpios 7 1>;
+ enable-gpios = <&pm8994_gpios 7 1>;
clock-mode = /bits/8 <2>;
label = "button-backlight";
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] arm64: dts: qcom: align LED node names with dtschema
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
@ 2022-11-27 20:32 ` Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 3/3] ARM: " Krzysztof Kozlowski
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-11-27 20:32 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern:
qcom/msm8998-oneplus-cheeseburger.dtb: leds: 'button-backlight' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
qcom/sc7180-trogdor-coachz-r1.dtb: pwmleds: 'keyboard-backlight' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes since v1:
1. Add Rb
---
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts | 2 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index b951f98d1b7b..9fb1fb9b8529 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -22,7 +22,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&button_backlight_default>;
- button-backlight {
+ led-keypad-backlight {
gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_KBD_BACKLIGHT;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 65601bea0797..74a90948db6b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -354,7 +354,7 @@ max98360a: audio-codec-0 {
pwmleds {
compatible = "pwm-leds";
- keyboard_backlight: keyboard-backlight {
+ keyboard_backlight: led-0 {
status = "disabled";
label = "cros_ec::kbd_backlight";
function = LED_FUNCTION_KBD_BACKLIGHT;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 448da9794722..27f479ff9d80 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -307,7 +307,7 @@ max98360a: audio-codec-0 {
pwmleds: pwmleds {
compatible = "pwm-leds";
status = "disabled";
- keyboard_backlight: keyboard-backlight {
+ keyboard_backlight: led-0 {
label = "cros_ec::kbd_backlight";
function = LED_FUNCTION_KBD_BACKLIGHT;
pwms = <&cros_ec_pwm 0>;
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] ARM: dts: qcom: align LED node names with dtschema
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 2/3] arm64: dts: qcom: align LED node names with dtschema Krzysztof Kozlowski
@ 2022-11-27 20:32 ` Krzysztof Kozlowski
2022-11-28 14:58 ` [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Konrad Dybcio
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-11-27 20:32 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern:
qcom-ipq4018-ap120c-ac.dtb: leds: 'wlan2g', 'wlan5g' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes since v1:
1. Add Rb
---
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts | 6 +++---
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index cf7da1ab177c..1b27edce9d4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -9,7 +9,7 @@ / {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "ap120c-ac:green:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@ power {
default-state = "on";
};
- wlan {
+ led-wlan {
label = "ap120c-ac:green:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
- support {
+ led-support {
label = "ap120c-ac:green:support";
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index c4f89b712fd9..a707057c887d 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -7,7 +7,7 @@ / {
leds {
compatible = "gpio-leds";
- status: status {
+ status: led-status {
label = "ap120c-ac:blue:status";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@ status: status {
default-state = "keep";
};
- wlan2g {
+ led-wlan2g {
label = "ap120c-ac:green:wlan2g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@ wlan2g {
linux,default-trigger = "phy0tpt";
};
- wlan5g {
+ led-wlan5g {
label = "ap120c-ac:red:wlan5g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 2/3] arm64: dts: qcom: align LED node names with dtschema Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 3/3] ARM: " Krzysztof Kozlowski
@ 2022-11-28 14:58 ` Konrad Dybcio
2022-12-06 18:19 ` (subset) " Bjorn Andersson
2022-12-28 4:36 ` Bjorn Andersson
4 siblings, 0 replies; 6+ messages in thread
From: Konrad Dybcio @ 2022-11-28 14:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 27.11.2022 21:32, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
>
> Changes since v1:
> 1. New patch
> ---
> arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> index d8734913482f..dbd5f7e2df65 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> @@ -54,7 +54,7 @@ lp5562@30 {
> reg = <0x30>;
> #address-cells = <1>;
> #size-cells = <0>;
> - enable-gpio = <&pm8994_gpios 7 1>;
> + enable-gpios = <&pm8994_gpios 7 1>;
> clock-mode = /bits/8 <2>;
> label = "button-backlight";
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
` (2 preceding siblings ...)
2022-11-28 14:58 ` [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Konrad Dybcio
@ 2022-12-06 18:19 ` Bjorn Andersson
2022-12-28 4:36 ` Bjorn Andersson
4 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2022-12-06 18:19 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, linux-arm-msm, linux-kernel,
devicetree, Andy Gross, Krzysztof Kozlowski, konrad.dybcio
On Sun, 27 Nov 2022 21:32:38 +0100, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
>
> [...]
Applied, thanks!
[3/3] ARM: dts: qcom: align LED node names with dtschema
commit: 3ebeed30209aa50505956076aff1cf00a6381760
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
` (3 preceding siblings ...)
2022-12-06 18:19 ` (subset) " Bjorn Andersson
@ 2022-12-28 4:36 ` Bjorn Andersson
4 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2022-12-28 4:36 UTC (permalink / raw)
To: krzysztof.kozlowski+dt, krzysztof.kozlowski, konrad.dybcio,
linux-kernel, robh+dt, devicetree, agross, linux-arm-msm
On Sun, 27 Nov 2022 21:32:38 +0100, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
>
> [...]
Applied, thanks!
[1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
commit: 4df05b44468cdf5dea7a7aa291eeabd7e639f8ff
[2/3] arm64: dts: qcom: align LED node names with dtschema
(no commit info)
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-12-28 4:37 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-27 20:32 [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 2/3] arm64: dts: qcom: align LED node names with dtschema Krzysztof Kozlowski
2022-11-27 20:32 ` [PATCH v2 3/3] ARM: " Krzysztof Kozlowski
2022-11-28 14:58 ` [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED Konrad Dybcio
2022-12-06 18:19 ` (subset) " Bjorn Andersson
2022-12-28 4:36 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).