devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
To: Adam Ford <aford173-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Michael Turquette
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v5 01/44] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks
Date: Thu, 11 Jan 2018 15:04:28 -0600	[thread overview]
Message-ID: <5832fd62-16aa-e167-7e52-2ce493e33cdc@lechnology.com> (raw)
In-Reply-To: <CAHCN7x+EtQs6NHAYbVga7vU1U+qQLqOxdf+1MW6HewaT+ZF_Xg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

On 01/11/2018 02:58 PM, Adam Ford wrote:
> On Thu, Jan 11, 2018 at 2:04 PM, David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org> wrote:
>> On 01/11/2018 12:50 PM, Adam Ford wrote:
>>>
>>> On Thu, Jan 11, 2018 at 12:29 PM, David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
>>> wrote:
>>>>
>>>> If removing the "clk_ignore_unused" option causes the board to not boot,
>>>> then we still have problems that need to be fixed, so please also test
>>>> without this option.
>>>
>>>
>>> Without this option, it still does not boot.  Without device tree it
>>> hangs after:
>>>
>>> [snip]
>>>
>>> NET: Registered protocol family 17
>>> Loading compiled-in X.509 certificates
>>> console [netcon0] enabled
>>> netconsole: network logging started
>>> davinci_emac davinci_emac.1: using random MAC addr: 5e:38:1a:1f:4f:77
>>> mmc0: host does not support reading read-only switch, assuming
>>> write-enable
>>> hctosys: unable to open rtc device (rtc0)
>>> mmc0: new high speed SDHC card at address b368
>>>
>>>
>>> With device tree it hangs after:
>>>
>>> [snip]
>>> mmc0: host does not support reading read-only switch, assuming
>>> write-enable
>>> mmc0: new high speed SDHC card at address b368
>>> mmcblk0: mmc0:b368 00000 3.75 GiB
>>>    mmcblk0: p1 p2
>>> pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator
>>> pca953x 0-0020: failed reading register
>>> pca953x: probe of 0-0020 failed with error -121
>>> console [netcon0] enabled
>>> netconsole: network logging started
>>> davinci_emac 1e20000.ethernet: incompatible machine/device type for
>>> reading mac address
>>> hctosys: unable to open rtc device (rtc0)
>>>
>>>
>>
>> Please try this change:
>>
>> diff --git a/drivers/clk/davinci/psc-da850.c
>> b/drivers/clk/davinci/psc-da850.c
>> index 3fd6b49..a526cc2 100644
>> --- a/drivers/clk/davinci/psc-da850.c
>> +++ b/drivers/clk/davinci/psc-da850.c
>> @@ -17,7 +17,7 @@ static const struct davinci_psc_clk_info da850_psc0_info[]
>> __initconst = {
>>          LPSC(0, 0, tpcc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>>          LPSC(1, 0, tptc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>>          LPSC(2, 0, tptc1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> -       LPSC(3, 0, aemif, pll0_sysclk3, 0),
>> +       LPSC(3, 0, aemif, pll0_sysclk3, LPSC_ALWAYS_ENABLED),
>>          LPSC(4, 0, spi0, pll0_sysclk2, 0),
>>          LPSC(5, 0, mmcsd0, pll0_sysclk2, 0),
>>          LPSC(6, 0, aintc, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
>>
>>
>>
>> If that does not work, try adding LPSC_ALWAYS_ENABLED to all of the clocks
>> in this file and then eliminate them one by one until you find which one is
>> preventing boot.
>>
> Unfortunately, that didn't work.  I switch all the entries in both
> tables that had a 0 to LPSC_ALWAYS_ENABLED, but no luck booting.
> 
>> If it still does not boot, there is a similar DIVCLK_ALWAYS_ENABLED flag in
>> drivers/clk/davinci/pll-da850.c that you can repeat the exercise with. Add
>> DIVCLK_ALWAYS_ENABLED to all of the clocks there and then eliminate it one
>> by one until you find the clock that is causing the problem.
> 
> Still no good news.  I switched all the entries with a 0 to
> DIVCLK_ALWAYS_ENABLED and it still didn't finish booting.
> 
> I wonder if Sekhar Nori might have some suggestions.  I didn't look at
> the code or try to understand it.  I just changed the settings.
>>

Even if a clock had another flag besides zero, you will need to add
LPSC_ALWAYS_ENABLED by or-ing it with the other flag.

diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index 3fd6b49..3375df6a1 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -17,38 +17,38 @@ static const struct davinci_psc_clk_info da850_psc0_info[] __initconst = {
  	LPSC(0, 0, tpcc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
  	LPSC(1, 0, tptc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
  	LPSC(2, 0, tptc1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
-	LPSC(3, 0, aemif, pll0_sysclk3, 0),
-	LPSC(4, 0, spi0, pll0_sysclk2, 0),
-	LPSC(5, 0, mmcsd0, pll0_sysclk2, 0),
+	LPSC(3, 0, aemif, pll0_sysclk3, LPSC_ALWAYS_ENABLED),
+	LPSC(4, 0, spi0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(5, 0, mmcsd0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
  	LPSC(6, 0, aintc, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
  	LPSC(7, 0, arm_rom, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
-	LPSC(9, 0, uart0, pll0_sysclk2, 0),
-	LPSC(13, 0, pruss, pll0_sysclk2, 0),
+	LPSC(9, 0, uart0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(13, 0, pruss, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
  	LPSC(14, 0, arm, pll0_sysclk6, LPSC_ALWAYS_ENABLED),
-	LPSC(15, 1, dsp, pll0_sysclk1, LPSC_FORCE | LPSC_LOCAL_RESET),
+	LPSC(15, 1, dsp, pll0_sysclk1, LPSC_FORCE | LPSC_LOCAL_RESET | LPSC_ALWAYS_ENABLED),
  	{ }
  };
  
  static const struct davinci_psc_clk_info da850_psc1_info[] __initconst = {
  	LPSC(0, 0, tpcc1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
-	LPSC(1, 0, usb0, pll0_sysclk2, 0),
-	LPSC(2, 0, usb1, pll0_sysclk4, 0),
-	LPSC(3, 0, gpio, pll0_sysclk4, 0),
-	LPSC(5, 0, emac, pll0_sysclk4, 0),
+	LPSC(1, 0, usb0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(2, 0, usb1, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
+	LPSC(3, 0, gpio, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
+	LPSC(5, 0, emac, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
  	LPSC(6, 0, emif3, pll0_sysclk5, LPSC_ALWAYS_ENABLED),
-	LPSC(7, 0, mcasp0, async3, 0),
-	LPSC(8, 0, sata, pll0_sysclk2, LPSC_FORCE),
-	LPSC(9, 0, vpif, pll0_sysclk2, 0),
-	LPSC(10, 0, spi1, async3, 0),
-	LPSC(11, 0, i2c1, pll0_sysclk4, 0),
-	LPSC(12, 0, uart1, async3, 0),
-	LPSC(13, 0, uart2, async3, 0),
-	LPSC(14, 0, mcbsp0, async3, 0),
-	LPSC(15, 0, mcbsp1, async3, 0),
-	LPSC(16, 0, lcdc, pll0_sysclk2, 0),
-	LPSC(17, 0, ehrpwm, async3, 0),
-	LPSC(18, 0, mmcsd1, pll0_sysclk2, 0),
-	LPSC(20, 0, ecap, async3, 0),
+	LPSC(7, 0, mcasp0, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(8, 0, sata, pll0_sysclk2, LPSC_FORCE | LPSC_ALWAYS_ENABLED),
+	LPSC(9, 0, vpif, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(10, 0, spi1, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(11, 0, i2c1, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
+	LPSC(12, 0, uart1, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(13, 0, uart2, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(14, 0, mcbsp0, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(15, 0, mcbsp1, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(16, 0, lcdc, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(17, 0, ehrpwm, async3, LPSC_ALWAYS_ENABLED),
+	LPSC(18, 0, mmcsd1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
+	LPSC(20, 0, ecap, async3, LPSC_ALWAYS_ENABLED),
  	LPSC(21, 0, tptc2, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
  	{ }
  };


diff --git a/drivers/clk/davinci/pll-da850.c b/drivers/clk/davinci/pll-da850.c
index 77a7223..f334e69 100644
--- a/drivers/clk/davinci/pll-da850.c
+++ b/drivers/clk/davinci/pll-da850.c
@@ -22,21 +22,21 @@
  
  static const struct davinci_pll_divclk_info
  da850_pll0_divclk_info[] __initconst = {
-	DIVCLK(1, pll0_sysclk1, pll0, DIVCLK_FIXED_DIV),
-	DIVCLK(2, pll0_sysclk2, pll0, DIVCLK_FIXED_DIV),
-	DIVCLK(3, pll0_sysclk3, pll0, 0),
-	DIVCLK(4, pll0_sysclk4, pll0, DIVCLK_FIXED_DIV),
-	DIVCLK(5, pll0_sysclk5, pll0, 0),
-	DIVCLK(6, pll0_sysclk6, pll0, DIVCLK_ARM_RATE | DIVCLK_FIXED_DIV),
-	DIVCLK(7, pll0_sysclk7, pll0, 0),
+	DIVCLK(1, pll0_sysclk1, pll0, DIVCLK_FIXED_DIV | DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(2, pll0_sysclk2, pll0, DIVCLK_FIXED_DIV | DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(3, pll0_sysclk3, pll0, DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(4, pll0_sysclk4, pll0, DIVCLK_FIXED_DIV | DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(5, pll0_sysclk5, pll0, DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(6, pll0_sysclk6, pll0, DIVCLK_ARM_RATE | DIVCLK_FIXED_DIV| DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(7, pll0_sysclk7, pll0, DIVCLK_ALWAYS_ENABLED),
  	{ }
  };
  
  static const struct davinci_pll_divclk_info
  da850_pll1_divclk_info[] __initconst = {
  	DIVCLK(1, pll1_sysclk1, pll1, DIVCLK_ALWAYS_ENABLED),
-	DIVCLK(2, pll1_sysclk2, pll1, 0),
-	DIVCLK(3, pll1_sysclk3, pll1, 0),
+	DIVCLK(2, pll1_sysclk2, pll1, DIVCLK_ALWAYS_ENABLED),
+	DIVCLK(3, pll1_sysclk3, pll1, DIVCLK_ALWAYS_ENABLED),
  	{ }
  };
  

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2018-01-11 21:04 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-08  2:16 [PATCH v5 00/44] ARM: davinci: convert to common clock framework​ David Lechner
2018-01-08  2:17 ` [PATCH v5 01/44] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks David Lechner
     [not found]   ` <1515377863-20358-2-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-08 14:00     ` Sekhar Nori
2018-01-08 16:29       ` David Lechner
2018-01-09 12:35         ` Sekhar Nori
     [not found]           ` <0f90b5f7-f21e-5f81-1154-9a815bbb786d-l0cyMroinI0@public.gmane.org>
2018-01-10  3:01             ` David Lechner
2018-01-10 18:52               ` Sekhar Nori
2018-01-10 22:24                 ` Adam Ford
     [not found]                   ` <CAHCN7x+ZYezmEU_0mF=6_gF14DZxKnuDp1Cx=aC2=eN_QLNdJQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-11  2:50                     ` David Lechner
2018-01-11 12:45                       ` Adam Ford
2018-01-11 15:47                         ` Sekhar Nori
     [not found]                           ` <14320e05-c6f7-fa2d-35cd-c01414c59f2f-l0cyMroinI0@public.gmane.org>
2018-01-11 16:14                             ` Adam Ford
2018-01-11 17:22                         ` David Lechner
2018-01-11 18:09                           ` Adam Ford
2018-01-11 18:29                             ` David Lechner
2018-01-11 18:50                               ` Adam Ford
     [not found]                                 ` <CAHCN7x+G5pxOeD7TahqiQUePEu1Z4Hyinkjq_bcSM+Hz36xoSg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-11 20:04                                   ` David Lechner
2018-01-11 20:58                                     ` Adam Ford
     [not found]                                       ` <CAHCN7x+EtQs6NHAYbVga7vU1U+qQLqOxdf+1MW6HewaT+ZF_Xg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-11 21:04                                         ` David Lechner [this message]
     [not found]                                           ` <5832fd62-16aa-e167-7e52-2ce493e33cdc-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-11 21:34                                             ` Adam Ford
2018-01-11 21:46                                               ` David Lechner
     [not found]                                                 ` <c1e27013-cbad-3b09-0e0d-f68d75162c1f-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-12  6:03                                                   ` Sekhar Nori
2018-01-16 11:22                                               ` Sekhar Nori
2018-01-16 12:21                                                 ` Adam Ford
2018-01-16 16:41                                                   ` David Lechner
2018-01-11 23:20                             ` David Lechner
2018-01-11  2:54                 ` David Lechner
2018-01-08  2:17 ` [PATCH v5 02/44] clk: davinci: New driver for davinci " David Lechner
2018-01-12  9:21   ` Sekhar Nori
2018-01-12 15:25     ` David Lechner
     [not found]       ` <01fbde0e-36a0-2b19-e385-e63bc4a3ae4a-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-12 15:30         ` Adam Ford
     [not found]           ` <CAHCN7xK44_zv27xe5yxL8Efey=VC-nypK6hY6VWqsoLqnKe04g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-12 15:48             ` David Lechner
2018-01-12 16:18       ` Sekhar Nori
     [not found]         ` <eb2b1a63-9c7c-aeca-170f-d38642442438-l0cyMroinI0@public.gmane.org>
2018-01-13  1:11           ` David Lechner
2018-01-16  6:48             ` Sekhar Nori
2018-01-13  2:13     ` David Lechner
2018-01-16  6:32       ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 03/44] clk: davinci: Add platform information for TI DA830 PLL David Lechner
     [not found]   ` <1515377863-20358-4-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-12  9:41     ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 04/44] clk: davinci: Add platform information for TI DA850 PLL David Lechner
2018-01-16  8:37   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 05/44] clk: davinci: Add platform information for TI DM355 PLL David Lechner
2018-01-16  8:38   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 06/44] clk: davinci: Add platform information for TI DM365 PLL David Lechner
     [not found]   ` <1515377863-20358-7-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-16  8:48     ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 07/44] clk: davinci: Add platform information for TI DM644x PLL David Lechner
     [not found]   ` <1515377863-20358-8-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-16  8:56     ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 08/44] clk: davinci: Add platform information for TI DM646x PLL David Lechner
2018-01-16  9:01   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 09/44] dt-bindings: clock: New bindings for TI Davinci PSC David Lechner
     [not found]   ` <1515377863-20358-10-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-11 21:22     ` Rob Herring
2018-01-08  2:17 ` [PATCH v5 10/44] clk: davinci: New driver for davinci PSC clocks David Lechner
2018-01-16 11:03   ` Sekhar Nori
2018-01-16 16:51     ` David Lechner
     [not found]       ` <83f3d207-9645-cbdf-d6cf-b6e6a8458abe-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-17 12:25         ` Sekhar Nori
2018-01-17 17:28           ` David Lechner
2018-01-08  2:17 ` [PATCH v5 11/44] clk: davinci: Add platform information for TI DA830 PSC David Lechner
     [not found]   ` <1515377863-20358-12-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-16 13:38     ` Sekhar Nori
     [not found]       ` <91fe16dc-907e-6dbb-c8db-c27561132093-l0cyMroinI0@public.gmane.org>
2018-01-16 17:16         ` David Lechner
     [not found]           ` <4dd36ca7-e41d-58d8-ec8c-787978307943-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-17 12:18             ` Sekhar Nori
     [not found]               ` <86581de6-a982-7a7b-9a83-22c869417211-l0cyMroinI0@public.gmane.org>
2018-01-17 17:32                 ` David Lechner
2018-01-18  7:53                   ` Sekhar Nori
     [not found] ` <1515377863-20358-1-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-08  2:17   ` [PATCH v5 12/44] clk: davinci: Add platform information for TI DA850 PSC David Lechner
     [not found]     ` <1515377863-20358-13-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-16 14:00       ` Sekhar Nori
2018-01-16 17:21         ` David Lechner
2018-01-17 11:57           ` Sekhar Nori
2018-01-17 17:33             ` David Lechner
2018-01-17 19:08             ` David Lechner
2018-01-18  6:37               ` Sekhar Nori
2018-02-09 16:22     ` Bartosz Golaszewski
2018-02-09 16:48       ` Michael Turquette
2018-02-12  3:03         ` David Lechner
2018-04-05 13:09         ` Sekhar Nori
2018-04-05 13:44           ` Bartosz Golaszewski
2018-04-05 14:36             ` Sekhar Nori
2018-04-05 15:37               ` David Lechner
2018-04-05 15:51               ` Bartosz Golaszewski
2018-04-06  9:37                 ` Sekhar Nori
2018-04-06 16:46                   ` Stephen Boyd
2018-04-23 14:59                     ` David Lechner
2018-04-24  8:28                       ` Sekhar Nori
2018-04-24 16:11                         ` David Lechner
2018-04-25  6:07                           ` Sekhar Nori
2018-04-25 10:09                             ` Bartosz Golaszewski
2018-04-25 10:26                               ` Bartosz Golaszewski
2018-01-08  2:17   ` [PATCH v5 13/44] clk: davinci: Add platform information for TI DM355 PSC David Lechner
     [not found]     ` <1515377863-20358-14-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-16 14:15       ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 14/44] clk: davinci: Add platform information for TI DM365 PSC David Lechner
2018-01-16 14:16   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 15/44] clk: davinci: Add platform information for TI DM644x PSC David Lechner
2018-01-17 13:57   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 16/44] clk: davinci: Add platform information for TI DM646x PSC David Lechner
2018-01-17 14:59   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 17/44] dt-bindings: clock: Add bindings for DA8XX CFGCHIP gate clocks David Lechner
     [not found]   ` <1515377863-20358-18-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-11 21:45     ` Rob Herring
2018-01-11 21:51       ` David Lechner
2018-01-08  2:17 ` [PATCH v5 18/44] dt-bindings: clock: Add binding for TI DA8XX CFGCHIP mux clocks David Lechner
2018-01-08  2:17 ` [PATCH v5 19/44] clk: davinci: New driver for TI DA8XX CFGCHIP clocks David Lechner
2018-01-17 15:31   ` Sekhar Nori
2018-01-17 17:35     ` David Lechner
2018-01-08  2:17 ` [PATCH v5 20/44] dt-bindings: clock: Add bindings for TI DA8XX USB PHY clocks David Lechner
2018-01-18 12:10   ` Sekhar Nori
     [not found]     ` <33f0feba-adee-e365-54d5-16fe3d49302d-l0cyMroinI0@public.gmane.org>
2018-01-18 19:00       ` David Lechner
2018-01-19  6:17         ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 21/44] clk: davinci: New driver " David Lechner
2018-01-18 13:05   ` Sekhar Nori
     [not found]     ` <493e4809-6b77-7772-70c7-ad0fa04e9033-l0cyMroinI0@public.gmane.org>
2018-01-18 18:49       ` David Lechner
2018-01-19  5:04         ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 22/44] ARM: davinci: move davinci_clk_init() to init_time David Lechner
2018-01-08  2:17 ` [PATCH v5 23/44] ARM: da830: add new clock init using common clock framework David Lechner
2018-01-08  2:17 ` [PATCH v5 24/44] ARM: da850: " David Lechner
     [not found]   ` <1515377863-20358-25-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-18 15:24     ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 25/44] ARM: dm355: " David Lechner
2018-01-08  2:17 ` [PATCH v5 26/44] ARM: dm365: " David Lechner
2018-01-08  2:17 ` [PATCH v5 27/44] ARM: dm644x: " David Lechner
2018-01-08  2:17 ` [PATCH v5 28/44] ARM: dm646x: " David Lechner
2018-01-08  2:17 ` [PATCH v5 29/44] ARM: da8xx: add new USB PHY " David Lechner
2018-01-18 15:14   ` Sekhar Nori
     [not found]     ` <83dfab9a-be30-6313-d756-50fa018e757e-l0cyMroinI0@public.gmane.org>
2018-01-18 18:43       ` David Lechner
2018-01-19  5:08         ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 35/44] ARM: da850: Remove legacy clock init David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5832fd62-16aa-e167-7e52-2ce493e33cdc@lechnology.com \
    --to=david-nq/r/kbu++upp/zk7jdf2g@public.gmane.org \
    --cc=aford173-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=nsekhar-l0cyMroinI0@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).