[PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Stefan Wahren]

This patch series implements DT polarity support for the 1st level interrupt
controller.

Stefan Wahren (3):
  dt-bindings: bcm2836-l1-intc: add interrupt polarity support
  irqchip: irq-bcm2836: add support for DT interrupt polarity
  ARM: dts: bcm283x: Define polarity of per-cpu interrupts

 .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
 arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
 arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
 arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
 drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
 5 files changed, 44 insertions(+), 33 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/3] dt-bindings: bcm2836-l1-intc: add interrupt polarity support

[Stefan Wahren]

This increases the interrupt cells for the 1st level interrupt controller
binding in order to describe the polarity like on the other ARM platforms.

Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
---
 .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index f320dcd..8ced169 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -12,7 +12,7 @@ Required properties:
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
 - #interrupt-cells:	Specifies the number of cells needed to encode an
-			  interrupt source. The value shall be 1
+			  interrupt source. The value shall be 2
 
 Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
@@ -32,6 +32,6 @@ local_intc: local_intc {
 	compatible = "brcm,bcm2836-l1-intc";
 	reg = <0x40000000 0x100>;
 	interrupt-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-parent = <&local_intc>;
 };
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] dt-bindings: bcm2836-l1-intc: add interrupt polarity support

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 350 bytes --]

Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> writes:

> This increases the interrupt cells for the 1st level interrupt controller
> binding in order to describe the polarity like on the other ARM platforms.
>
> Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>

I'm happy with this.  Any DT maintainer concerns?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH 1/3] dt-bindings: bcm2836-l1-intc: add interrupt polarity support

[Rob Herring]

On Mon, Dec 11, 2017 at 09:39:10PM +0100, Stefan Wahren wrote:
> This increases the interrupt cells for the 1st level interrupt controller
> binding in order to describe the polarity like on the other ARM platforms.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
> ---
>  .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Stefan Wahren]

In order to properly define the polarity of the per-cpu interrupts,
we need to support for a second property cell. But this must be
optional to keep backward compatibility with old DT blobs.

Suggested-by: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
---
 drivers/irqchip/irq-bcm2836.c | 46 ++++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index 667b9e1..dfe4a46 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -98,13 +98,35 @@ static struct irq_chip bcm2836_arm_irqchip_gpu = {
 	.irq_unmask	= bcm2836_arm_irqchip_unmask_gpu_irq,
 };
 
-static void bcm2836_arm_irqchip_register_irq(int hwirq, struct irq_chip *chip)
-{
-	int irq = irq_create_mapping(intc.domain, hwirq);
+static int bcm2836_map(struct irq_domain *d, unsigned int irq,
+		       irq_hw_number_t hw)
+{
+	struct irq_chip *chip;
+
+	switch (hw) {
+	case LOCAL_IRQ_CNTPSIRQ:
+	case LOCAL_IRQ_CNTPNSIRQ:
+	case LOCAL_IRQ_CNTHPIRQ:
+	case LOCAL_IRQ_CNTVIRQ:
+		chip = &bcm2836_arm_irqchip_timer;
+		break;
+	case LOCAL_IRQ_GPU_FAST:
+		chip = &bcm2836_arm_irqchip_gpu;
+		break;
+	case LOCAL_IRQ_PMU_FAST:
+		chip = &bcm2836_arm_irqchip_pmu;
+		break;
+	default:
+		pr_warn_once("Unexpected hw irq: %lu\n", hw);
+		return -EINVAL;
+	}
 
 	irq_set_percpu_devid(irq);
-	irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq);
+	irq_domain_set_info(d, irq, hw, chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
 	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+
+	return 0;
 }
 
 static void
@@ -165,7 +187,8 @@ static int bcm2836_cpu_dying(unsigned int cpu)
 #endif
 
 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
-	.xlate = irq_domain_xlate_onecell
+	.xlate = irq_domain_xlate_onetwocell,
+	.map = bcm2836_map,
 };
 
 static void
@@ -218,19 +241,6 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
 	if (!intc.domain)
 		panic("%pOF: unable to create IRQ domain\n", node);
 
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPSIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPNSIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTHPIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTVIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_GPU_FAST,
-					 &bcm2836_arm_irqchip_gpu);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_PMU_FAST,
-					 &bcm2836_arm_irqchip_pmu);
-
 	bcm2836_arm_irqchip_smp_init();
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/3] ARM: dts: bcm283x: Define polarity of per-cpu interrupts

[Stefan Wahren]

This patch define the polarity of the per-cpu interrupts on BCM2836
and BCM2837 in order to avoid the warnings from ARM arch timer code:

    arch_timer: WARNING: Invalid trigger for IRQ19, assuming level low
    arch_timer: WARNING: Please fix your firmware
    arch_timer: cp15 timer(s) running at 19.20MHz (virt).

Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
---
 arch/arm/boot/dts/bcm2836.dtsi | 14 +++++++-------
 arch/arm/boot/dts/bcm2837.dtsi | 12 ++++++------
 arch/arm/boot/dts/bcm283x.dtsi |  1 +
 3 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 61e1580..1dfd764 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -13,24 +13,24 @@
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
 
 		arm-pmu {
 			compatible = "arm,cortex-a7-pmu";
 			interrupt-parent = <&local_intc>;
-			interrupts = <9>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
 		always-on;
 	};
 
@@ -76,7 +76,7 @@
 	compatible = "brcm,bcm2836-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &cpu_thermal {
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index bc1cca5..efa7d33 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -12,7 +12,7 @@
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
 	};
@@ -20,10 +20,10 @@
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
 		always-on;
 	};
 
@@ -73,7 +73,7 @@
 	compatible = "brcm,bcm2836-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &cpu_thermal {
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index e08203c..0d43bd4 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -2,6 +2,7 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 /* firmware-provided startup stubs live here, where the secondary CPUs are
  * spinning.
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Stefan Wahren]

Hi Marc,

Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
> This patch series implements DT polarity support for the 1st level interrupt
> controller.
>
> Stefan Wahren (3):
>    dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>    irqchip: irq-bcm2836: add support for DT interrupt polarity
>    ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>
>   .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>   arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>   arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>   arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>   drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>   5 files changed, 44 insertions(+), 33 deletions(-)
>

is this series okay?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Marc Zyngier]

On 19/12/17 07:02, Stefan Wahren wrote:
> Hi Marc,
> 
> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>> This patch series implements DT polarity support for the 1st level interrupt
>> controller.
>>
>> Stefan Wahren (3):
>>    dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>    irqchip: irq-bcm2836: add support for DT interrupt polarity
>>    ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>
>>   .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>   arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>   arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>   arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>   drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>   5 files changed, 44 insertions(+), 33 deletions(-)
>>
> 
> is this series okay?

Yes, it does look good. I'll queue that for 4.16.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1084 bytes --]

Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org> writes:

> On 19/12/17 07:02, Stefan Wahren wrote:
>> Hi Marc,
>> 
>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>> This patch series implements DT polarity support for the 1st level interrupt
>>> controller.
>>>
>>> Stefan Wahren (3):
>>>    dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>    irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>    ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>
>>>   .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>   arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>   arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>   arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>   drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>   5 files changed, 44 insertions(+), 33 deletions(-)
>>>
>> 
>> is this series okay?
>
> Yes, it does look good. I'll queue that for 4.16.

Are you grabbing all 3, or should I be grabbing the DT one?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Marc Zyngier]

On 19/12/17 18:41, Eric Anholt wrote:
> Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org> writes:
> 
>> On 19/12/17 07:02, Stefan Wahren wrote:
>>> Hi Marc,
>>>
>>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>>> This patch series implements DT polarity support for the 1st level interrupt
>>>> controller.
>>>>
>>>> Stefan Wahren (3):
>>>>    dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>>    irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>>    ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>>
>>>>   .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>>   arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>>   arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>>   arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>>   drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>>   5 files changed, 44 insertions(+), 33 deletions(-)
>>>>
>>>
>>> is this series okay?
>>
>> Yes, it does look good. I'll queue that for 4.16.
> 
> Are you grabbing all 3, or should I be grabbing the DT one?

All 3, if that's OK with you.

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1299 bytes --]

Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org> writes:

> On 19/12/17 18:41, Eric Anholt wrote:
>> Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org> writes:
>> 
>>> On 19/12/17 07:02, Stefan Wahren wrote:
>>>> Hi Marc,
>>>>
>>>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>>>> This patch series implements DT polarity support for the 1st level interrupt
>>>>> controller.
>>>>>
>>>>> Stefan Wahren (3):
>>>>>    dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>>>    irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>>>    ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>>>
>>>>>   .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>>>   arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>>>   arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>>>   arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>>>   drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>>>   5 files changed, 44 insertions(+), 33 deletions(-)
>>>>>
>>>>
>>>> is this series okay?
>>>
>>> Yes, it does look good. I'll queue that for 4.16.
>> 
>> Are you grabbing all 3, or should I be grabbing the DT one?
>
> All 3, if that's OK with you.

Go for it.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Stefan Wahren]

Hi Marc,


Am 19.12.2017 um 17:36 schrieb Marc Zyngier:
> On 19/12/17 07:02, Stefan Wahren wrote:
>> Hi Marc,
>>
>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>> This patch series implements DT polarity support for the 1st level interrupt
>>> controller.
>>>
>>> Stefan Wahren (3):
>>>     dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>     irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>     ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>
>>>    .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>    arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>    arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>    arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>    drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>    5 files changed, 44 insertions(+), 33 deletions(-)
>>>
>> is this series okay?
> Yes, it does look good. I'll queue that for 4.16.
>
> Thanks,
>
> 	M.

since i didn't found this in linux-next, please take this as a gentle 
reminder.

Thanks
Stefan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity

[Marc Zyngier]

On 03/01/18 17:10, Stefan Wahren wrote:
> Hi Marc,
> 
> 
> Am 19.12.2017 um 17:36 schrieb Marc Zyngier:
>> On 19/12/17 07:02, Stefan Wahren wrote:
>>> Hi Marc,
>>>
>>> Am 11.12.2017 um 21:39 schrieb Stefan Wahren:
>>>> This patch series implements DT polarity support for the 1st level interrupt
>>>> controller.
>>>>
>>>> Stefan Wahren (3):
>>>>     dt-bindings: bcm2836-l1-intc: add interrupt polarity support
>>>>     irqchip: irq-bcm2836: add support for DT interrupt polarity
>>>>     ARM: dts: bcm283x: Define polarity of per-cpu interrupts
>>>>
>>>>    .../interrupt-controller/brcm,bcm2836-l1-intc.txt  |  4 +-
>>>>    arch/arm/boot/dts/bcm2836.dtsi                     | 14 +++----
>>>>    arch/arm/boot/dts/bcm2837.dtsi                     | 12 +++---
>>>>    arch/arm/boot/dts/bcm283x.dtsi                     |  1 +
>>>>    drivers/irqchip/irq-bcm2836.c                      | 46 +++++++++++++---------
>>>>    5 files changed, 44 insertions(+), 33 deletions(-)
>>>>
>>> is this series okay?
>> Yes, it does look good. I'll queue that for 4.16.
>>
>> Thanks,
>>
>> 	M.
> 
> since i didn't found this in linux-next, please take this as a gentle 
> reminder.

It will take some time before I push this to tglx, as I'm otherwise
engaged. Patches are not lost.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html