devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
[RFC] devicetree: new FDT format version
 2018-01-29  0:53 UTC  (19+ messages)

[PATCH v2 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
 2018-01-28 23:29 UTC  (17+ messages)
` [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support
  ` [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
  ` [PATCH v2 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC
  ` [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
  ` [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
  ` [PATCH v2 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
  ` [PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
  ` [PATCH v2 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
  ` [PATCH v2 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  ` [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T "
  ` [PATCH v2 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
  ` [PATCH v2 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3
  ` [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3
  ` [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  ` [PATCH v2 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T
  ` [PATCH v2 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T

[PATCH v5 00/11] PCI: Add support to the Cadence PCIe controller
 2018-01-28 21:47 UTC  (13+ messages)
  ` [PATCH v5 01/11] PCI: Regroup all PCI related entries into drivers/pci/Makefile
  ` [PATCH v5 02/11] PCI: OF: Add generic function to parse and allocate PCI resources
  ` [PATCH v5 03/11] PCI: generic: fix missing call of pci_free_resource_list()
  ` [PATCH v5 04/11] PCI: Add generic function to probe PCI host controllers
  ` [PATCH v5 05/11] PCI: Add vendor ID for Cadence
` [PATCH v5 06/11] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
` [PATCH v5 07/11] PCI: cadence: Add host driver for Cadence PCIe controller
` [PATCH v5 08/11] PCI: endpoint: Add the function number as argument to EPC ops
` [PATCH v5 09/11] PCI: endpoint: Fix EPF device name to support multi-function devices
` [PATCH v5 10/11] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
` [PATCH v5 11/11] PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller

[PATCH 0/5] improvements and fixes for the phy-meson-gxl-usb2 driver
 2018-01-28 20:22 UTC  (6+ messages)
  ` [PATCH 1/5] dt-bindings: phy: meson-gxl-usb2-phy: add the reset line and clock
  ` [PATCH 2/5] phy: amlogic: phy-meson-gxl-usb2: support the clock and reset line
  ` [PATCH 3/5] phy: amlogic: phy-meson-gxl-usb2: default to host mode
  ` [PATCH 4/5] phy: amlogic: phy-meson-gxl-usb2: don't log an error on -EPROBE_DEFER
  ` [PATCH 5/5] phy: amlogic: phy-meson-gxl-usb2: rename some of the U2P_R2 registers

[PATCH v2 0/2] Meson GXL USB3 PHY driver
 2018-01-28 20:15 UTC  (3+ messages)
  ` [PATCH v2 1/2] dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs
  ` [PATCH v2 2/2] phy: amlogic: add USB3 PHY support for Meson GXL and GXM

[PATCH 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs
 2018-01-28 20:03 UTC  (4+ messages)
  ` [PATCH 1/3] dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX
  ` [PATCH 2/3] usb: dwc3: of-simple: add support for shared and pulsed reset lines
  ` [PATCH 3/3] usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs

[PATCH v2 0/6] Nintendo Wii GPIO driver
 2018-01-28 17:31 UTC  (8+ messages)
` [PATCH v2 1/6] resource: Extend the PPC32 reserved memory hack
` [PATCH v2 3/6] gpio: Add GPIO driver for Nintendo Wii

[PATCH 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
 2018-01-28 14:39 UTC  (38+ messages)
  ` [PATCH 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
  ` [PATCH 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC
  ` [PATCH 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
  ` [PATCH 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
  ` [PATCH 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
  ` [PATCH 06/16] iio: adc: sun4i-gpadc-iio: rework: support multible sensors
  ` [PATCH 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
  ` [PATCH 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support
  ` [PATCH 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  ` [PATCH 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T "
      ` [linux-sunxi] "
  ` [PATCH 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
  ` [PATCH 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3
  ` [PATCH 13/16] arm: dts: sun8i: h3: add thermal zone to H3
          ` [linux-sunxi] "
  ` [PATCH 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  ` [PATCH 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T
  ` [PATCH 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T
        ` [linux-sunxi] "

[PATCH] Nokia N9: add support for up/down keys in the dts
 2018-01-28  9:16 UTC  (5+ messages)

[PATCH v3 00/16] add support for AXP813 ADC and battery power supply
 2018-01-28  8:12 UTC  (5+ messages)
` [PATCH v3 07/16] iio: adc: axp20x_adc: add support for AXP813 ADC

[PATCH v6 2/2] media: V3s: Add support for Allwinner CSI
 2018-01-28  2:39 UTC  (9+ messages)
          ` [linux-sunxi] "

[PATCH] kbuild: fix W= option checks for extra DTC warnings
 2018-01-28  1:41 UTC  (2+ messages)

[PATCH] ARM: dts: imx25-pinfunc: Always set SION for SD CMD
 2018-01-27 20:43 UTC  (5+ messages)

[PATCH v11 0/6] Add support for Qualcomm A53 CPU clock
 2018-01-27  3:44 UTC  (8+ messages)
` [PATCH v11 2/6] mailbox: qcom: Create APCS child device for clock controller

[PATCH v2 1/6] mfd: syscon: Add ingenic-tcu.h header
 2018-01-27  0:37 UTC  (4+ messages)
` [PATCH v3 1/9] "
  ` [PATCH v3 7/9] clk: ingenic: Add JZ47xx TCU clocks driver

[PATCH v2] of: use hash based search in of_find_node_by_phandle
 2018-01-26 23:26 UTC  (7+ messages)

[PATCH 0/2] Add DTS for SDM845 SoC and MTP
 2018-01-26 22:18 UTC  (6+ messages)
` [PATCH 1/2] arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 "
` [PATCH 2/2] arm64: dts: sdm845: Add serial console support

[PATCH] of: use hash based search in of_find_node_by_phandle
 2018-01-26 21:34 UTC  (9+ messages)

[PATCH v2 0/5] GICv3 Save and Restore
 2018-01-26 21:13 UTC  (4+ messages)
` [PATCH v2 2/5] irqchip/gic-v3-its: add ability to save/restore ITS state

[RFC PATCH 0/9] initial support for "suniv" Allwinner new ARM9 SoC
 2018-01-26 20:57 UTC  (7+ messages)

[PATCH BUGFIX] ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration
 2018-01-26 20:00 UTC  (2+ messages)

[PATCH v2 3/7] soc: qcom: Add GENI based QUP Wrapper driver
 2018-01-26 19:38 UTC  (2+ messages)
` [v2,3/7] "

[RFC 00/37] Fix watchdog on Renesas R-Car Gen2 and RZ/G1
 2018-01-26 18:00 UTC  (38+ messages)
` [RFC 01/37] ARM: shmobile: Add watchdog support
        ` [RFC v2 "
          ` [RFC v2 23/37] ARM: shmobile: rcar-gen2: Export shmobile_set_wdt_clock_status function
` [RFC 10/37] soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2
` [RFC 22/37] watchdog: renesas_wdt: Add restart support
` [RFC 24/37] watchdog: renesas_wdt_gen2: Add Gen2 specific driver
` [RFC 26/37] clk: renesas: r8a7743: Add rwdt clock
` [RFC 29/37] clk: renesas: r8a7791/r8a7793: "
` [RFC 30/37] clk: renesas: r8a7794: "
` [RFC 31/37] ARM: dts: r8a7743: Add watchdog support to SoC dtsi
` [RFC 32/37] ARM: dts: r8a7745: "
` [RFC 33/37] ARM: dts: r8a7790: "
` [RFC 34/37] ARM: dts: r8a7791: "
` [RFC 35/37] ARM: dts: r8a7794: "
` [RFC 36/37] ARM: dts: iwg20m: Add watchdog support to SoM dtsi
` [RFC 37/37] ARM: dts: iwg22m: "

[PATCH v4 0/8] PCI: brcmstb: Add Broadcom Settopbox PCIe support
 2018-01-26 17:46 UTC  (11+ messages)
` [PATCH v4 4/8] PCI: brcmstb: Add dma-range mapping for inbound traffic

[PATCH v3 1/4] regulator: core: Move of_find_regulator_by_node() to of_regulator.c
 2018-01-26 17:35 UTC  (2+ messages)
` Applied "regulator: core: Move of_find_regulator_by_node() to of_regulator.c" to the regulator tree

[PATCH v4 2/7] regulator: core: Refactor regulator_list_voltage()
 2018-01-26 17:35 UTC  (2+ messages)
` Applied "regulator: core: Refactor regulator_list_voltage()" to the regulator tree

[PATCH v4 0/7] Add coupled regulators mechanism
 2018-01-26 17:31 UTC  (2+ messages)

KSZ9031 (micrel rgmii phy) devicetree for Toradex iMX7
 2018-01-26 17:21 UTC 

[PATCH] ARM: dts: stm32: Fix HSE clock frequency for stm32h743i-disco board
 2018-01-26 16:23 UTC 

[PATCH V4 1/5] bindings: regulator: added support for suspend states
 2018-01-26 15:26 UTC  (2+ messages)
  ` Applied "regulator: added support for suspend states" to the regulator tree

[PATCH v3 3/5] drivers: regulator: leave one item to record whether regulator is enabled
 2018-01-26 15:26 UTC  (2+ messages)
` Applied "regulator: leave one item to record whether regulator is enabled" to the regulator tree

[PATCH 4/5] drivers: regulator: empty the old suspend functions
 2018-01-26 15:26 UTC  (2+ messages)
  ` Applied "regulator: empty the old suspend functions" to the regulator tree

[PATCH v2 0/8] Add support for PWM input capture on STM32
 2018-01-26 15:11 UTC  (9+ messages)
` [PATCH v2 1/8] pwm: stm32: fix, remove unused struct device
` [PATCH v2 2/8] pwm: stm32: protect common prescaler for all channels
` [PATCH v2 3/8] dt-bindings: mfd: stm32-timers: add support for dmas
` [PATCH v2 4/8] "
` [PATCH v2 5/8] pwm: stm32: add capture support
` [PATCH v2 6/8] pwm: stm32: improve capture by tuning counter prescaler
` [PATCH v2 7/8] pwm: stm32: use input prescaler to improve period capture
` [PATCH v2 8/8] ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval

[PATCH] ARM: dts: ls1021a: add quadspi node
 2018-01-26 14:20 UTC 

[PATCH v7 00/11] Renesas Capture Engine Unit (CEU) V4L2 driver
 2018-01-26 13:56 UTC  (18+ messages)
` [PATCH v7 01/11] dt-bindings: media: Add Renesas CEU bindings
` [PATCH v7 02/11] include: media: Add Renesas CEU driver interface
` [PATCH v7 03/11] media: platform: Add Renesas CEU driver
` [PATCH v7 3/9] v4l: "
` [PATCH v7 04/11] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
` [PATCH v7 05/11] media: i2c: Copy ov772x soc_camera sensor driver
` [PATCH v7 5/9] v4l: "
` [PATCH v7 06/11] media: i2c: ov772x: Remove soc_camera dependencies
` [PATCH v7 07/11] media: i2c: ov772x: Support frame interval handling
` [PATCH v7 7/9] v4l: i2c: Copy tw9910 soc_camera sensor driver
` [PATCH v7 08/11] media: "
` [PATCH v7 8/9] media: i2c: tw9910: Remove soc_camera dependencies
` [PATCH v7 9/9] arch: sh: migor: Use new renesas-ceu camera driver
` [PATCH v7 09/11] media: i2c: tw9910: Remove soc_camera dependencies
` [PATCH v7 10/11] arch: sh: migor: Use new renesas-ceu camera driver

[PATCH v7 00/11] Renesas Capture Engine Unit (CEU) V4L2 driver
 2018-01-26 13:55 UTC  (12+ messages)
` [PATCH v7 01/11] dt-bindings: media: Add Renesas CEU bindings
` [PATCH v7 02/11] include: media: Add Renesas CEU driver interface
` [PATCH v7 03/11] media: platform: Add Renesas CEU driver
` [PATCH v7 04/11] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
` [PATCH v7 05/11] media: i2c: Copy ov772x soc_camera sensor driver
` [PATCH v7 06/11] media: i2c: ov772x: Remove soc_camera dependencies
` [PATCH v7 07/11] media: i2c: ov772x: Support frame interval handling
` [PATCH v7 08/11] media: i2c: Copy tw9910 soc_camera sensor driver
` [PATCH v7 09/11] media: i2c: tw9910: Remove soc_camera dependencies
` [PATCH v7 10/11] arch: sh: migor: Use new renesas-ceu camera driver
` [PATCH v7 11/11] media: i2c: ov7670: Fully set mbus frame fmt

[PATCH 1/2] drm/panel: Device tree bindings for ARM Versatile panels
 2018-01-26 13:33 UTC 

[PATCH V5 0/5] Add regulator suspend and resume support
 2018-01-26 13:08 UTC  (6+ messages)
` [PATCH V5 1/5] bindings: regulator: added support for suspend states
` [PATCH V5 2/5] regulator: make regulator voltage be an array to support more states
` [PATCH V5 3/5] drivers: regulator: leave one item to record whether regulator is enabled
` [PATCH V5 4/5] drivers: regulator: empty the old suspend functions
` [PATCH V5 5/5] regulator: add PM suspend and resume hooks

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).