* [PATCH 0/2] Implement EPSON RX-8035 support
@ 2021-07-07 7:16 Mathew McBride
2021-07-07 7:16 ` [PATCH 1/2] rtc: rx8025: implement " Mathew McBride
2021-07-07 7:16 ` [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035 Mathew McBride
0 siblings, 2 replies; 9+ messages in thread
From: Mathew McBride @ 2021-07-07 7:16 UTC (permalink / raw)
To: linux-rtc, Alessandro Zummo, Alexandre Belloni, Rob Herring, devicetree
Cc: Mathew McBride
The EPSON RX-8035[SA] is a I2C real time clock module with
built-in oscillator[1]. It is a very close relative of the EPSON
RX-8025 that is supported by the rtc-rx8025 driver.
The main difference is that the RX-8035 has inverted the
'oscillator stop' bit in the control register. The operation
of the devices is otherwise identical for the features currently
supported.
Curiously, the RX-8025 is also supported by the ds1307 driver
as the time register set is compatible. The control registers,
however, are not.
I have decided to implement the RX-8035 in rtc-rx8025 due the simplicity
of that driver.
As best as I can determine, the rtc-rx8025 driver was in the tree
some months[1] before rx8025 support was added to ds1307[2].
[1] - https://www5.epsondevice.com/en/products/rtc/rx8035sa.html
[2] - commit 3c2b9075cbdb541dbe486bde45925c9610de6f35
[3] - commit a216685818a54b4f15235068b53908f954850251
Mathew McBride (2):
rtc: rx8025: implement RX-8035 support
dt-bindings: rtc: add Epson RX-8025 and RX-8035
.../devicetree/bindings/rtc/trivial-rtc.yaml | 3 +
drivers/rtc/rtc-rx8025.c | 59 +++++++++++++++++--
2 files changed, 56 insertions(+), 6 deletions(-)
--
2.30.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] rtc: rx8025: implement RX-8035 support
2021-07-07 7:16 [PATCH 0/2] Implement EPSON RX-8035 support Mathew McBride
@ 2021-07-07 7:16 ` Mathew McBride
2021-07-07 21:38 ` Nobuhiro Iwamatsu
2021-07-07 7:16 ` [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035 Mathew McBride
1 sibling, 1 reply; 9+ messages in thread
From: Mathew McBride @ 2021-07-07 7:16 UTC (permalink / raw)
To: linux-rtc, Alessandro Zummo, Alexandre Belloni, Rob Herring, devicetree
Cc: Mathew McBride
The RX-8035 is a newer RTC from EPSON that is very
similar to the RX-8025.
The key difference is in the oscillation stop (XSTP)
bit which is inverted on the RX-8035.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
---
drivers/rtc/rtc-rx8025.c | 59 ++++++++++++++++++++++++++++++++++++----
1 file changed, 53 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index c914091819ba..1a33ec402f4a 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -60,14 +60,24 @@
#define RX8025_ADJ_DATA_MAX 62
#define RX8025_ADJ_DATA_MIN -62
+enum rx_model {
+ model_rx_unknown,
+ model_rx_8025,
+ model_rx_8035,
+ model_last
+};
+
static const struct i2c_device_id rx8025_id[] = {
- { "rx8025", 0 },
+ { "rx8025", model_rx_8025 },
+ { "rx8035", model_rx_8035 },
{ }
};
+
MODULE_DEVICE_TABLE(i2c, rx8025_id);
struct rx8025_data {
struct rtc_device *rtc;
+ enum rx_model type;
u8 ctrl1;
};
@@ -100,10 +110,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
length, values);
}
+static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
+{
+ int xstp = ctrl2 & RX8025_BIT_CTRL2_XST;
+ /* XSTP bit has different polarity on RX-8025 vs RX-8035.
+ * RX-8025: 0 == oscillator stopped
+ * RX-8035: 1 == oscillator stopped
+ */
+
+ if (model == model_rx_8025)
+ xstp = !xstp;
+
+ return xstp;
+}
+
static int rx8025_check_validity(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct rx8025_data *drvdata = dev_get_drvdata(dev);
int ctrl2;
+ int xstp;
ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
if (ctrl2 < 0)
@@ -117,7 +143,8 @@ static int rx8025_check_validity(struct device *dev)
return -EINVAL;
}
- if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
+ xstp = rx8025_is_osc_stopped(drvdata->type, ctrl2);
+ if (xstp) {
dev_warn(dev, "crystal stopped, date is invalid\n");
return -EINVAL;
}
@@ -125,7 +152,7 @@ static int rx8025_check_validity(struct device *dev)
return 0;
}
-static int rx8025_reset_validity(struct i2c_client *client)
+static int rx8025_reset_validity(enum rx_model model, struct i2c_client *client)
{
int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
@@ -134,8 +161,13 @@ static int rx8025_reset_validity(struct i2c_client *client)
ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
+ if (model == model_rx_8025)
+ ctrl2 |= RX8025_BIT_CTRL2_XST;
+ else
+ ctrl2 &= ~(RX8025_BIT_CTRL2_XST);
+
return rx8025_write_reg(client, RX8025_REG_CTRL2,
- ctrl2 | RX8025_BIT_CTRL2_XST);
+ ctrl2);
}
static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
@@ -149,7 +181,7 @@ static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
if (status < 0)
goto out;
- if (!(status & RX8025_BIT_CTRL2_XST))
+ if (rx8025_is_osc_stopped(rx8025->type, status))
dev_warn(&client->dev, "Oscillation stop was detected,"
"you may have to readjust the clock\n");
@@ -241,7 +273,7 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
if (ret < 0)
return ret;
- return rx8025_reset_validity(client);
+ return rx8025_reset_validity(rx8025->type, client);
}
static int rx8025_init_client(struct i2c_client *client)
@@ -519,6 +551,21 @@ static int rx8025_probe(struct i2c_client *client,
i2c_set_clientdata(client, rx8025);
+ if (id) {
+ rx8025->type = id->driver_data;
+ switch (rx8025->type) {
+ case model_rx_8025:
+ dev_info(&client->dev, "Type RX-8025");
+ break;
+ case model_rx_8035:
+ dev_info(&client->dev, "Type RX-8035");
+ break;
+ default:
+ dev_warn(&client->dev, "Unknown type: %d\n", rx8025->type);
+ break;
+ }
+ }
+
err = rx8025_init_client(client);
if (err)
return err;
--
2.30.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-07 7:16 [PATCH 0/2] Implement EPSON RX-8035 support Mathew McBride
2021-07-07 7:16 ` [PATCH 1/2] rtc: rx8025: implement " Mathew McBride
@ 2021-07-07 7:16 ` Mathew McBride
2021-07-07 21:46 ` Nobuhiro Iwamatsu
1 sibling, 1 reply; 9+ messages in thread
From: Mathew McBride @ 2021-07-07 7:16 UTC (permalink / raw)
To: linux-rtc, Alessandro Zummo, Alexandre Belloni, Rob Herring, devicetree
Cc: Mathew McBride
These are supported by the rtc-rx8025 module. RX-8025
also has support in ds1307 due to compatible time registers.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
---
Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 7548d8714871..13925bb78ec7 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -32,6 +32,9 @@ properties:
- dallas,ds3232
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE
- epson,rx8010
+ # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+ - epson,rx8025
+ - epson,rx8035
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
- epson,rx8571
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE
--
2.30.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] rtc: rx8025: implement RX-8035 support
2021-07-07 7:16 ` [PATCH 1/2] rtc: rx8025: implement " Mathew McBride
@ 2021-07-07 21:38 ` Nobuhiro Iwamatsu
0 siblings, 0 replies; 9+ messages in thread
From: Nobuhiro Iwamatsu @ 2021-07-07 21:38 UTC (permalink / raw)
To: Mathew McBride
Cc: linux-rtc, Alessandro Zummo, Alexandre Belloni, Rob Herring, devicetree
Hi,
2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
>
> The RX-8035 is a newer RTC from EPSON that is very
> similar to the RX-8025.
>
> The key difference is in the oscillation stop (XSTP)
> bit which is inverted on the RX-8035.
>
> Signed-off-by: Mathew McBride <matt@traverse.com.au>
> ---
> drivers/rtc/rtc-rx8025.c | 59 ++++++++++++++++++++++++++++++++++++----
> 1 file changed, 53 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
> index c914091819ba..1a33ec402f4a 100644
> --- a/drivers/rtc/rtc-rx8025.c
> +++ b/drivers/rtc/rtc-rx8025.c
> @@ -60,14 +60,24 @@
> #define RX8025_ADJ_DATA_MAX 62
> #define RX8025_ADJ_DATA_MIN -62
>
> +enum rx_model {
> + model_rx_unknown,
> + model_rx_8025,
> + model_rx_8035,
> + model_last
> +};
> +
> static const struct d rx8025_id[] = {
> - { "rx8025", 0 },
> + { "rx8025", model_rx_8025 },
> + { "rx8035", model_rx_8035 },
> { }
> };
> +
> MODULE_DEVICE_TABLE(i2c, rx8025_id);
>
> struct rx8025_data {
> struct rtc_device *rtc;
> + enum rx_model type;
I think 'model' is easier to understand than 'type'.
> u8 ctrl1;
> };
>
> @@ -100,10 +110,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
> length, values);
> }
>
> +static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
> +{
> + int xstp = ctrl2 & RX8025_BIT_CTRL2_XST;
> + /* XSTP bit has different polarity on RX-8025 vs RX-8035.
> + * RX-8025: 0 == oscillator stopped
> + * RX-8035: 1 == oscillator stopped
> + */
> +
> + if (model == model_rx_8025)
> + xstp = !xstp;
> +
> + return xstp;
> +}
> +
> static int rx8025_check_validity(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> + struct rx8025_data *drvdata = dev_get_drvdata(dev);
> int ctrl2;
> + int xstp;
>
> ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
> if (ctrl2 < 0)
> @@ -117,7 +143,8 @@ static int rx8025_check_validity(struct device *dev)
> return -EINVAL;
> }
>
> - if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
> + xstp = rx8025_is_osc_stopped(drvdata->type, ctrl2);
> + if (xstp) {
> dev_warn(dev, "crystal stopped, date is invalid\n");
> return -EINVAL;
> }
> @@ -125,7 +152,7 @@ static int rx8025_check_validity(struct device *dev)
> return 0;
> }
>
> -static int rx8025_reset_validity(struct i2c_client *client)
> +static int rx8025_reset_validity(enum rx_model model, struct i2c_client *client)
We can get the struct rx8025_data by using i2c_get_clientdata().
Therefore, I think that it can be updated without increasing the arguments.
```
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
if (rx8025->type == model_rx_8025)
```
> {
> int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
>
> @@ -134,8 +161,13 @@ static int rx8025_reset_validity(struct i2c_client *client)
>
> ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
>
> + if (model == model_rx_8025)
> + ctrl2 |= RX8025_BIT_CTRL2_XST;
> + else
> + ctrl2 &= ~(RX8025_BIT_CTRL2_XST);
> +
> return rx8025_write_reg(client, RX8025_REG_CTRL2,
> - ctrl2 | RX8025_BIT_CTRL2_XST);
> + ctrl2);
> }
>
> static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
> @@ -149,7 +181,7 @@ static irqreturn_t (int irq, void *dev_id)
> if (status < 0)
> goto out;
>
> - if (!(status & RX8025_BIT_CTRL2_XST))
> + if (rx8025_is_osc_stopped(rx8025->type, status))
In rx8025_check_validity(), the return value is put in xstp and confirmed.
I thought it would be better to unify to either one.
> dev_warn(&client->dev, "Oscillation stop was detected,"
> "you may have to readjust the clock\n");
>
> @@ -241,7 +273,7 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
> if (ret < 0)
> return ret;
>
> - return rx8025_reset_validity(client);
> + return rx8025_reset_validity(rx8025->type, client);
> }
>
> static int rx8025_init_client(struct i2c_client *client)
> @@ -519,6 +551,21 @@ static int rx8025_probe(struct i2c_client *client,
>
> i2c_set_clientdata(client, rx8025);
>
> + if (id) {
> + rx8025->type = id->driver_data;
> + switch (rx8025->type) {
> + case model_rx_8025:
> + dev_info(&client->dev, "Type RX-8025");
> + break;
Please fix indent.
> + case model_rx_8035:
> + dev_info(&client->dev, "Type RX-8035");
> + break;
> + default:
> + dev_warn(&client->dev, "Unknown type: %d\n", rx8025->type);
> + break;
ditto.
> + }
> + }
> +
> err = rx8025_init_client(client);
> if (err)
> return err;
> --
> 2.30.1
>
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org / kernel.org}
GPG ID: 40AD1FA6
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-07 7:16 ` [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035 Mathew McBride
@ 2021-07-07 21:46 ` Nobuhiro Iwamatsu
2021-07-07 21:52 ` Alexandre Belloni
0 siblings, 1 reply; 9+ messages in thread
From: Nobuhiro Iwamatsu @ 2021-07-07 21:46 UTC (permalink / raw)
To: Mathew McBride
Cc: linux-rtc, Alessandro Zummo, Alexandre Belloni, Rob Herring, devicetree
Hi,
2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
>
> These are supported by the rtc-rx8025 module. RX-8025
> also has support in ds1307 due to compatible time registers.
>
> Signed-off-by: Mathew McBride <matt@traverse.com.au>
> ---
> Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> index 7548d8714871..13925bb78ec7 100644
> --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> @@ -32,6 +32,9 @@ properties:
> - dallas,ds3232
> # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> - epson,rx8010
> + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> + - epson,rx8025
> + - epson,rx8035
'epson,rx8035' is unnsecessary.
This lists compatible string, so we don't list compatible that doesn't exist.
> # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
> - epson,rx8571
> # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> --
> 2.30.1
>
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org / kernel.org}
GPG ID: 40AD1FA6
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-07 21:46 ` Nobuhiro Iwamatsu
@ 2021-07-07 21:52 ` Alexandre Belloni
2021-07-09 7:19 ` Nobuhiro Iwamatsu
0 siblings, 1 reply; 9+ messages in thread
From: Alexandre Belloni @ 2021-07-07 21:52 UTC (permalink / raw)
To: Nobuhiro Iwamatsu
Cc: Mathew McBride, linux-rtc, Alessandro Zummo, Rob Herring, devicetree
On 08/07/2021 06:46:31+0900, Nobuhiro Iwamatsu wrote:
> Hi,
>
> 2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
> >
> > These are supported by the rtc-rx8025 module. RX-8025
> > also has support in ds1307 due to compatible time registers.
> >
> > Signed-off-by: Mathew McBride <matt@traverse.com.au>
> > ---
> > Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > index 7548d8714871..13925bb78ec7 100644
> > --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > @@ -32,6 +32,9 @@ properties:
> > - dallas,ds3232
> > # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > - epson,rx8010
> > + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > + - epson,rx8025
> > + - epson,rx8035
>
> 'epson,rx8035' is unnsecessary.
> This lists compatible string, so we don't list compatible that doesn't exist.
>
Well, the previous patch adds it.
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-07 21:52 ` Alexandre Belloni
@ 2021-07-09 7:19 ` Nobuhiro Iwamatsu
2021-07-10 0:40 ` Alexandre Belloni
0 siblings, 1 reply; 9+ messages in thread
From: Nobuhiro Iwamatsu @ 2021-07-09 7:19 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Mathew McBride, linux-rtc, Alessandro Zummo, Rob Herring, devicetree
Hi,
2021年7月8日(木) 6:52 Alexandre Belloni <alexandre.belloni@bootlin.com>:
>
> On 08/07/2021 06:46:31+0900, Nobuhiro Iwamatsu wrote:
> > Hi,
> >
> > 2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
> > >
> > > These are supported by the rtc-rx8025 module. RX-8025
> > > also has support in ds1307 due to compatible time registers.
> > >
> > > Signed-off-by: Mathew McBride <matt@traverse.com.au>
> > > ---
> > > Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > index 7548d8714871..13925bb78ec7 100644
> > > --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > @@ -32,6 +32,9 @@ properties:
> > > - dallas,ds3232
> > > # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > - epson,rx8010
> > > + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > + - epson,rx8025
> > > + - epson,rx8035
> >
> > 'epson,rx8035' is unnsecessary.
> > This lists compatible string, so we don't list compatible that doesn't exist.
> >
>
> Well, the previous patch adds it.
>
I couldn't find anything to add "epson,rx8035" as device tree compatible in
previous patch(rtc: rx8025: implement RX-8035 support)....
I think that i2c_device_id was added and it is not device tree compatible.
Can you tell me if my understanding is wrong?
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-09 7:19 ` Nobuhiro Iwamatsu
@ 2021-07-10 0:40 ` Alexandre Belloni
2021-07-12 0:02 ` Nobuhiro Iwamatsu
0 siblings, 1 reply; 9+ messages in thread
From: Alexandre Belloni @ 2021-07-10 0:40 UTC (permalink / raw)
To: Nobuhiro Iwamatsu
Cc: Mathew McBride, linux-rtc, Alessandro Zummo, Rob Herring, devicetree
Hello,
On 09/07/2021 16:19:49+0900, Nobuhiro Iwamatsu wrote:
> Hi,
>
> 2021年7月8日(木) 6:52 Alexandre Belloni <alexandre.belloni@bootlin.com>:
> >
> > On 08/07/2021 06:46:31+0900, Nobuhiro Iwamatsu wrote:
> > > Hi,
> > >
> > > 2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
> > > >
> > > > These are supported by the rtc-rx8025 module. RX-8025
> > > > also has support in ds1307 due to compatible time registers.
> > > >
> > > > Signed-off-by: Mathew McBride <matt@traverse.com.au>
> > > > ---
> > > > Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
> > > > 1 file changed, 3 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > index 7548d8714871..13925bb78ec7 100644
> > > > --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > @@ -32,6 +32,9 @@ properties:
> > > > - dallas,ds3232
> > > > # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > > - epson,rx8010
> > > > + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > > + - epson,rx8025
> > > > + - epson,rx8035
> > >
> > > 'epson,rx8035' is unnsecessary.
> > > This lists compatible string, so we don't list compatible that doesn't exist.
> > >
> >
> > Well, the previous patch adds it.
> >
>
> I couldn't find anything to add "epson,rx8035" as device tree compatible in
> previous patch(rtc: rx8025: implement RX-8035 support)....
> I think that i2c_device_id was added and it is not device tree compatible.
> Can you tell me if my understanding is wrong?
Having "rx8035" in the struct i2c_device_id array is enough to have the
driver probed using DT. IIRC, it is a side effect of
i2c_of_match_device_sysfs()
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035
2021-07-10 0:40 ` Alexandre Belloni
@ 2021-07-12 0:02 ` Nobuhiro Iwamatsu
0 siblings, 0 replies; 9+ messages in thread
From: Nobuhiro Iwamatsu @ 2021-07-12 0:02 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Mathew McBride, linux-rtc, Alessandro Zummo, Rob Herring, devicetree
Hi,
2021年7月10日(土) 9:41 Alexandre Belloni <alexandre.belloni@bootlin.com>:
>
> Hello,
>
> On 09/07/2021 16:19:49+0900, Nobuhiro Iwamatsu wrote:
> > Hi,
> >
> > 2021年7月8日(木) 6:52 Alexandre Belloni <alexandre.belloni@bootlin.com>:
> > >
> > > On 08/07/2021 06:46:31+0900, Nobuhiro Iwamatsu wrote:
> > > > Hi,
> > > >
> > > > 2021年7月7日(水) 16:17 Mathew McBride <matt@traverse.com.au>:
> > > > >
> > > > > These are supported by the rtc-rx8025 module. RX-8025
> > > > > also has support in ds1307 due to compatible time registers.
> > > > >
> > > > > Signed-off-by: Mathew McBride <matt@traverse.com.au>
> > > > > ---
> > > > > Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++
> > > > > 1 file changed, 3 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > > index 7548d8714871..13925bb78ec7 100644
> > > > > --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > > +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> > > > > @@ -32,6 +32,9 @@ properties:
> > > > > - dallas,ds3232
> > > > > # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > > > - epson,rx8010
> > > > > + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
> > > > > + - epson,rx8025
> > > > > + - epson,rx8035
> > > >
> > > > 'epson,rx8035' is unnsecessary.
> > > > This lists compatible string, so we don't list compatible that doesn't exist.
> > > >
> > >
> > > Well, the previous patch adds it.
> > >
> >
> > I couldn't find anything to add "epson,rx8035" as device tree compatible in
> > previous patch(rtc: rx8025: implement RX-8035 support)....
> > I think that i2c_device_id was added and it is not device tree compatible.
> > Can you tell me if my understanding is wrong?
>
> Having "rx8035" in the struct i2c_device_id array is enough to have the
> driver probed using DT. IIRC, it is a side effect of
> i2c_of_match_device_sysfs()
I understood. Thanks for the explanation.
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-07-12 0:03 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-07 7:16 [PATCH 0/2] Implement EPSON RX-8035 support Mathew McBride
2021-07-07 7:16 ` [PATCH 1/2] rtc: rx8025: implement " Mathew McBride
2021-07-07 21:38 ` Nobuhiro Iwamatsu
2021-07-07 7:16 ` [PATCH 2/2] dt-bindings: rtc: add Epson RX-8025 and RX-8035 Mathew McBride
2021-07-07 21:46 ` Nobuhiro Iwamatsu
2021-07-07 21:52 ` Alexandre Belloni
2021-07-09 7:19 ` Nobuhiro Iwamatsu
2021-07-10 0:40 ` Alexandre Belloni
2021-07-12 0:02 ` Nobuhiro Iwamatsu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).