[PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio

[PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio

[Dan Murphy]

The wake-up of the device can be configured as an optional
feature of the device.  Move the wake-up gpio from a requried
property to an optional property.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 27e1b4cebfbd..7cf5ef7acba4 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -10,7 +10,6 @@ Required properties:
 	- #size-cells: 0
 	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
 			     operate at should be less than or equal to 18 MHz.
-	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 	- interrupt-parent: the phandle to the interrupt controller which provides
                     the interrupt.
 	- interrupts: interrupt specification for data-ready.
@@ -23,6 +22,7 @@ Optional properties:
 		       reset.
 	- device-state-gpios: Input GPIO that indicates if the device is in
 			      a sleep state or if the device is active.
+	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
-- 
2.23.0

[PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Dan Murphy]

The device has the ability to disable the wake-up pin option.
The wake-up pin can be either force to GND or Vsup and does not have to
be tied to a GPIO.  In order for the device to not use the wake-up feature
write the register to disable the WAKE_CONFIG option.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Sean Nyekjaer <sean@geanix.com>
---
 drivers/net/can/m_can/tcan4x5x.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 3db619209fe1..6e37c3fd87af 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -101,6 +101,8 @@
 #define TCAN4X5X_MODE_STANDBY BIT(6)
 #define TCAN4X5X_MODE_NORMAL BIT(7)
 
+#define TCAN4X5X_DISABLE_WAKE_MSK	(BIT(31) | BIT(30))
+
 #define TCAN4X5X_SW_RESET BIT(2)
 
 #define TCAN4X5X_MCAN_CONFIGURED BIT(5)
@@ -338,6 +340,15 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
 	return ret;
 }
 
+static int tcan4x5x_disable_wake(struct m_can_classdev *cdev)
+{
+	struct tcan4x5x_priv *tcan4x5x = cdev->device_data;
+
+	return regmap_update_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
+				  TCAN4X5X_DISABLE_WAKE_MSK, 0x00);
+
+}
+
 static int tcan4x5x_parse_config(struct m_can_classdev *cdev)
 {
 	struct tcan4x5x_priv *tcan4x5x = cdev->device_data;
@@ -345,8 +356,10 @@ static int tcan4x5x_parse_config(struct m_can_classdev *cdev)
 	tcan4x5x->device_wake_gpio = devm_gpiod_get(cdev->dev, "device-wake",
 						    GPIOD_OUT_HIGH);
 	if (IS_ERR(tcan4x5x->device_wake_gpio)) {
-		dev_err(cdev->dev, "device-wake gpio not defined\n");
-		return -EINVAL;
+		if (PTR_ERR(tcan4x5x->power) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		tcan4x5x_disable_wake(cdev);
 	}
 
 	tcan4x5x->reset_gpio = devm_gpiod_get_optional(cdev->dev, "reset",
@@ -428,10 +441,6 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, priv);
 
-	ret = tcan4x5x_parse_config(mcan_class);
-	if (ret)
-		goto out_clk;
-
 	/* Configure the SPI bus */
 	spi->bits_per_word = 32;
 	ret = spi_setup(spi);
@@ -441,6 +450,10 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	priv->regmap = devm_regmap_init(&spi->dev, &tcan4x5x_bus,
 					&spi->dev, &tcan4x5x_regmap);
 
+	ret = tcan4x5x_parse_config(mcan_class);
+	if (ret)
+		goto out_clk;
+
 	tcan4x5x_power_enable(priv->power, 1);
 
 	ret = m_can_class_register(mcan_class);
-- 
2.23.0

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Sean Nyekjaer]

On 04/12/2019 18.51, Dan Murphy wrote:
> The device has the ability to disable the wake-up pin option.
> The wake-up pin can be either force to GND or Vsup and does not have to
> be tied to a GPIO.  In order for the device to not use the wake-up feature
> write the register to disable the WAKE_CONFIG option.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
> ---


Hi Dan,

I would add tcan4x5x to the subject of this patch ->
"net: m_can: tcan4x5x Make wake-up gpio an optional"

Will be testing this during this or the next week...

/Sean

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Dan Murphy]

Marc

On 12/5/19 1:39 AM, Sean Nyekjaer wrote:
>
>
> On 04/12/2019 18.51, Dan Murphy wrote:
>> The device has the ability to disable the wake-up pin option.
>> The wake-up pin can be either force to GND or Vsup and does not have to
>> be tied to a GPIO.  In order for the device to not use the wake-up 
>> feature
>> write the register to disable the WAKE_CONFIG option.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> CC: Sean Nyekjaer <sean@geanix.com>
> Reviewed-by: Sean Nyekjaer <sean@geanix.com>
>> ---
>
>
> Hi Dan,
>
> I would add tcan4x5x to the subject of this patch ->
> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>
Do you want me to submit v2 with the $subject change?

Or would you fix it up when committing it?

Dan

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1209 bytes --]

On 12/5/19 2:26 PM, Dan Murphy wrote:
> On 12/5/19 1:39 AM, Sean Nyekjaer wrote:
>>
>>
>> On 04/12/2019 18.51, Dan Murphy wrote:
>>> The device has the ability to disable the wake-up pin option.
>>> The wake-up pin can be either force to GND or Vsup and does not have to
>>> be tied to a GPIO.  In order for the device to not use the wake-up 
>>> feature
>>> write the register to disable the WAKE_CONFIG option.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> CC: Sean Nyekjaer <sean@geanix.com>
>> Reviewed-by: Sean Nyekjaer <sean@geanix.com>
>>> ---
>>
>>
>> Hi Dan,
>>
>> I would add tcan4x5x to the subject of this patch ->
>> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>>
> Do you want me to submit v2 with the $subject change?
> 
> Or would you fix it up when committing it?

I'll change the subject while applying.

Dan, what about maintainerchip of the tcan4x5?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Dan Murphy]

Marc

On 12/5/19 8:39 AM, Marc Kleine-Budde wrote:
> On 12/5/19 2:26 PM, Dan Murphy wrote:
>> On 12/5/19 1:39 AM, Sean Nyekjaer wrote:
>>>
>>> On 04/12/2019 18.51, Dan Murphy wrote:
>>>> The device has the ability to disable the wake-up pin option.
>>>> The wake-up pin can be either force to GND or Vsup and does not have to
>>>> be tied to a GPIO.  In order for the device to not use the wake-up
>>>> feature
>>>> write the register to disable the WAKE_CONFIG option.
>>>>
>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>> CC: Sean Nyekjaer <sean@geanix.com>
>>> Reviewed-by: Sean Nyekjaer <sean@geanix.com>
>>>> ---
>>>
>>> Hi Dan,
>>>
>>> I would add tcan4x5x to the subject of this patch ->
>>> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>>>
>> Do you want me to submit v2 with the $subject change?
>>
>> Or would you fix it up when committing it?
> I'll change the subject while applying.
>
> Dan, what about maintainerchip of the tcan4x5?

Ooops that was buried in my inbox.

It only makes sense for someone from TI to take maintainership of the 
TCAN device.

Do I need to submit a patch to the maintainers file or is the authorship 
enough?

As far as a device what country do you reside in?

Dan


> regards,
> Marc
>

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1857 bytes --]

On 12/5/19 4:01 PM, Dan Murphy wrote:
>> Dan, what about maintainerchip of the tcan4x5?
> 
> Ooops that was buried in my inbox.
> 
> It only makes sense for someone from TI to take maintainership of the 
> TCAN device.

Sriram Dash (Cc'ed) is maintainer of the MMIO driver:

> +F:     Documentation/devicetree/bindings/net/can/m_can.txt                                                                                                                                                        
> +F:     drivers/net/can/m_can/m_can.c                                                                                                                                                                              
> +F:     drivers/net/can/m_can/m_can.h                                                                                                                                                                              
> +F:     drivers/net/can/m_can/m_can_platform.c                                                                                                                                                                     

See:

> Do I need to submit a patch to the maintainers file or is the authorship 
> enough?

Yes, please send a patch, see Sriram's patch as an example:

> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/commit/?h=linux-can-fixes-for-5.5-20191203&id=8c2a58568d6d952f7c7f1dac125b33dc8414627b

> As far as a device what country do you reside in?

Germany, I'll drop you the address in a private Mail.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Dan Murphy]

Marc

On 12/5/19 8:39 AM, Marc Kleine-Budde wrote:
> On 12/5/19 2:26 PM, Dan Murphy wrote:
>> On 12/5/19 1:39 AM, Sean Nyekjaer wrote:
>>>
>>> On 04/12/2019 18.51, Dan Murphy wrote:
>>>> The device has the ability to disable the wake-up pin option.
>>>> The wake-up pin can be either force to GND or Vsup and does not have to
>>>> be tied to a GPIO.  In order for the device to not use the wake-up
>>>> feature
>>>> write the register to disable the WAKE_CONFIG option.
>>>>
>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>> CC: Sean Nyekjaer <sean@geanix.com>
>>> Reviewed-by: Sean Nyekjaer <sean@geanix.com>
>>>> ---
>>>
>>> Hi Dan,
>>>
>>> I would add tcan4x5x to the subject of this patch ->
>>> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>>>
>> Do you want me to submit v2 with the $subject change?
>>
>> Or would you fix it up when committing it?
> I'll change the subject while applying.
>
> Dan, what about maintainerchip of the tcan4x5?

Do you know when you will be applying these?

I have 2 patches I need to put on top.

Dan

> regards,
> Marc
>

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1061 bytes --]

On 12/9/19 10:01 PM, Dan Murphy wrote:
>>>> I would add tcan4x5x to the subject of this patch ->
>>>> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>>>>
>>> Do you want me to submit v2 with the $subject change?
>>>
>>> Or would you fix it up when committing it?
>> I'll change the subject while applying.
>>
>> Dan, what about maintainerchip of the tcan4x5?
> 
> Do you know when you will be applying these?

The patch is already upstream. See linux-can/mater:

https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/

https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/commit/?id=2de497356955ce58cd066fb03d2da5235f3c7c23

> I have 2 patches I need to put on top.

Please post them as linux-can/master as base.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Dan Murphy]

Marc

On 12/9/19 3:06 PM, Marc Kleine-Budde wrote:
> On 12/9/19 10:01 PM, Dan Murphy wrote:
>>>>> I would add tcan4x5x to the subject of this patch ->
>>>>> "net: m_can: tcan4x5x Make wake-up gpio an optional"
>>>>>
>>>> Do you want me to submit v2 with the $subject change?
>>>>
>>>> Or would you fix it up when committing it?
>>> I'll change the subject while applying.
>>>
>>> Dan, what about maintainerchip of the tcan4x5?
>> Do you know when you will be applying these?
> The patch is already upstream. See linux-can/mater:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/commit/?id=2de497356955ce58cd066fb03d2da5235f3c7c23

Ah I was looking here

https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git

>

Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 800 bytes --]

On 12/9/19 10:07 PM, Dan Murphy wrote:
>>> Do you know when you will be applying these?
>> The patch is already upstream. See linux-can/mater:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/commit/?id=2de497356955ce58cd066fb03d2da5235f3c7c23
> 
> Ah I was looking here
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git

Bugfixes go to linux-can. New features to linux-can-next.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio

[Sean Nyekjaer]

On 04/12/2019 18.51, Dan Murphy wrote:
> The wake-up of the device can be configured as an optional
> feature of the device.  Move the wake-up gpio from a requried
> property to an optional property.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Rob Herring <robh@kernel.org>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
> ---
>   Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> index 27e1b4cebfbd..7cf5ef7acba4 100644
> --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> @@ -10,7 +10,6 @@ Required properties:
>   	- #size-cells: 0
>   	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
>   			     operate at should be less than or equal to 18 MHz.
> -	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>   	- interrupt-parent: the phandle to the interrupt controller which provides
>                       the interrupt.
>   	- interrupts: interrupt specification for data-ready.
> @@ -23,6 +22,7 @@ Optional properties:
>   		       reset.
>   	- device-state-gpios: Input GPIO that indicates if the device is in
>   			      a sleep state or if the device is active.
> +	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>   
>   Example:
>   tcan4x5x: tcan4x5x@0 {
> 

Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio

[Sean Nyekjaer]

On 05/12/2019 08.36, Sean Nyekjaer wrote:
> 
> 
> On 04/12/2019 18.51, Dan Murphy wrote:
>> The wake-up of the device can be configured as an optional
>> feature of the device.  Move the wake-up gpio from a requried
>> property to an optional property.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> CC: Rob Herring <robh@kernel.org>
> Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
>> ---
>>   Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt 
>> b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>> index 27e1b4cebfbd..7cf5ef7acba4 100644
>> --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>> +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>> @@ -10,7 +10,6 @@ Required properties:
>>       - #size-cells: 0
>>       - spi-max-frequency: Maximum frequency of the SPI bus the chip can
>>                    operate at should be less than or equal to 18 MHz.
>> -    - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>>       - interrupt-parent: the phandle to the interrupt controller 
>> which provides
>>                       the interrupt.
>>       - interrupts: interrupt specification for data-ready.
>> @@ -23,6 +22,7 @@ Optional properties:
>>                  reset.
>>       - device-state-gpios: Input GPIO that indicates if the device is in
>>                     a sleep state or if the device is active.
>> +    - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>>   Example:
>>   tcan4x5x: tcan4x5x@0 {
>>

Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio

[Sean Nyekjaer]

On 04/12/2019 18.51, Dan Murphy wrote:
> The wake-up of the device can be configured as an optional
> feature of the device.  Move the wake-up gpio from a requried
> property to an optional property.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Rob Herring <robh@kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
> ---
>   Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> index 27e1b4cebfbd..7cf5ef7acba4 100644
> --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
> @@ -10,7 +10,6 @@ Required properties:
>   	- #size-cells: 0
>   	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
>   			     operate at should be less than or equal to 18 MHz.
> -	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>   	- interrupt-parent: the phandle to the interrupt controller which provides
>                       the interrupt.
>   	- interrupts: interrupt specification for data-ready.
> @@ -23,6 +22,7 @@ Optional properties:
>   		       reset.
>   	- device-state-gpios: Input GPIO that indicates if the device is in
>   			      a sleep state or if the device is active.
> +	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
>   
>   Example:
>   tcan4x5x: tcan4x5x@0 {
>