[PATCH v3 3/9] regulator: mt6380: Add support for MT6380

[<sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]

From: Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

The MT6380 is a regulator found those boards with MediaTek MT7622 SoC
It is connected as a slave to the SoC using MediaTek PMIC wrapper which
is the common interface connecting with Mediatek made various PMICs.

Signed-off-by: Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6380-regulator.c       | 352 +++++++++++++++++++++++++++++
 include/linux/regulator/mt6380-regulator.h |  32 +++
 4 files changed, 394 insertions(+)
 create mode 100644 drivers/regulator/mt6380-regulator.c
 create mode 100644 include/linux/regulator/mt6380-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 99b9362..1205e82 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -559,6 +559,15 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6380
+	tristate "MediaTek MT6380 PMIC"
+	depends on MTK_PMIC_WRAP
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6380 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6397
 	tristate "MediaTek MT6397 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 95b1e86..81514b8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c
new file mode 100644
index 0000000..127dd72
--- /dev/null
+++ b/drivers/regulator/mt6380-regulator.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6380-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+/* PMIC Registers */
+#define MT6380_ALDO_CON_0                         0x0000
+#define MT6380_BTLDO_CON_0                        0x0004
+#define MT6380_COMP_CON_0                         0x0008
+#define MT6380_CPUBUCK_CON_0                      0x000C
+#define MT6380_CPUBUCK_CON_1                      0x0010
+#define MT6380_CPUBUCK_CON_2                      0x0014
+#define MT6380_DDRLDO_CON_0                       0x0018
+#define MT6380_MLDO_CON_0                         0x001C
+#define MT6380_PALDO_CON_0                        0x0020
+#define MT6380_PHYLDO_CON_0                       0x0024
+#define MT6380_SIDO_CON_0                         0x0028
+#define MT6380_SIDO_CON_1                         0x002C
+#define MT6380_SIDO_CON_2                         0x0030
+#define MT6380_SLDO_CON_0                         0x0034
+#define MT6380_TLDO_CON_0                         0x0038
+#define MT6380_STARTUP_CON_0                      0x003C
+#define MT6380_STARTUP_CON_1                      0x0040
+#define MT6380_SMPS_TOP_CON_0                     0x0044
+#define MT6380_SMPS_TOP_CON_1                     0x0048
+#define MT6380_ANA_CTRL_0                         0x0050
+#define MT6380_ANA_CTRL_1                         0x0054
+#define MT6380_ANA_CTRL_2                         0x0058
+#define MT6380_ANA_CTRL_3                         0x005C
+#define MT6380_ANA_CTRL_4                         0x0060
+#define MT6380_SPK_CON9                           0x0064
+#define MT6380_SPK_CON11                          0x0068
+#define MT6380_SPK_CON12                          0x006A
+#define MT6380_CLK_CTRL                           0x0070
+#define MT6380_PINMUX_CTRL                        0x0074
+#define MT6380_IO_CTRL                            0x0078
+#define MT6380_SLP_MODE_CTRL_0                    0x007C
+#define MT6380_SLP_MODE_CTRL_1                    0x0080
+#define MT6380_SLP_MODE_CTRL_2                    0x0084
+#define MT6380_SLP_MODE_CTRL_3                    0x0088
+#define MT6380_SLP_MODE_CTRL_4                    0x008C
+#define MT6380_SLP_MODE_CTRL_5                    0x0090
+#define MT6380_SLP_MODE_CTRL_6                    0x0094
+#define MT6380_SLP_MODE_CTRL_7                    0x0098
+#define MT6380_SLP_MODE_CTRL_8                    0x009C
+#define MT6380_FCAL_CTRL_0                        0x00A0
+#define MT6380_FCAL_CTRL_1                        0x00A4
+#define MT6380_LDO_CTRL_0                         0x00A8
+#define MT6380_LDO_CTRL_1                         0x00AC
+#define MT6380_LDO_CTRL_2                         0x00B0
+#define MT6380_LDO_CTRL_3                         0x00B4
+#define MT6380_LDO_CTRL_4                         0x00B8
+#define MT6380_DEBUG_CTRL_0                       0x00BC
+#define MT6380_EFU_CTRL_0                         0x0200
+#define MT6380_EFU_CTRL_1                         0x0201
+#define MT6380_EFU_CTRL_2                         0x0202
+#define MT6380_EFU_CTRL_3                         0x0203
+#define MT6380_EFU_CTRL_4                         0x0204
+#define MT6380_EFU_CTRL_5                         0x0205
+#define MT6380_EFU_CTRL_6                         0x0206
+#define MT6380_EFU_CTRL_7                         0x0207
+#define MT6380_EFU_CTRL_8                         0x0208
+
+#define MT6380_REGULATOR_MODE_AUTO	0
+#define MT6380_REGULATOR_MODE_FORCE_PWM	1
+
+/*
+ * mt6380 regulators' information
+ *
+ * @desc: standard fields of regulator description
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @modeset_reg: Register for controlling the buck/LDO control mode
+ * @modeset_mask: Mask for controlling the buck/LDO control mode
+ */
+struct mt6380_regulator_info {
+	struct regulator_desc desc;
+	u32 vselon_reg;
+	u32 modeset_reg;
+	u32 modeset_mask;
+};
+
+#define MT6380_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		    vosel, vosel_mask, enbit, voselon, _modeset_reg,	\
+		    _modeset_mask)					\
+[MT6380_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6380_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6380_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ((max) - (min)) / (step) + 1,		\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.vselon_reg = voselon,						\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6380_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		   vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6380_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6380_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6380_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6380_REG_FIXED(match, vreg, enreg, enbit, volt,		\
+			 _modeset_reg, _modeset_mask)			\
+[MT6380_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6380_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6380_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000),
+};
+
+static const u32 ldo_volt_table1[] = {
+	1400000, 1350000, 1300000, 1250000, 1200000, 1150000, 1100000, 1050000,
+};
+
+static const u32 ldo_volt_table2[] = {
+	2200000, 3300000,
+};
+
+static const u32 ldo_volt_table3[] = {
+	1240000, 1390000, 1540000, 1840000,
+};
+
+static const u32 ldo_volt_table4[] = {
+	2200000, 3300000,
+};
+
+static int mt6380_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = MT6380_REGULATOR_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_FAST:
+		val = MT6380_REGULATOR_MODE_FORCE_PWM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				 info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6380_regulator_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	switch (val) {
+	case MT6380_REGULATOR_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case MT6380_REGULATOR_MODE_FORCE_PWM:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return mode;
+}
+
+static const struct regulator_ops mt6380_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mt6380_regulator_set_mode,
+	.get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mt6380_regulator_set_mode,
+	.get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mt6380_regulator_set_mode,
+	.get_mode = mt6380_regulator_get_mode,
+};
+
+/* The array is indexed by id(MT6380_ID_XXX) */
+static struct mt6380_regulator_info mt6380_regulators[] = {
+	MT6380_BUCK("buck-vcore1", VCPU, 600000, 1393750, 6250,
+		    buck_volt_range1, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_1,
+		    0xfe, 3, MT6380_ANA_CTRL_1,
+		    MT6380_CPUBUCK_CON_0, 0x8000000),
+	MT6380_BUCK("buck-vcore", VCORE, 600000, 1393750, 6250,
+		    buck_volt_range2, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_2,
+		    0xfe, 2, MT6380_ANA_CTRL_2, MT6380_SIDO_CON_0, 0x1000000),
+	MT6380_BUCK("buck-vrf", VRF, 1200000, 1575000, 25000,
+		    buck_volt_range3, MT6380_ANA_CTRL_3, MT6380_SIDO_CON_0,
+		    0x78, 1, MT6380_SIDO_CON_0, MT6380_SIDO_CON_0, 0x8000),
+	MT6380_LDO("ldo-vm", VMLDO, ldo_volt_table1, MT6380_LDO_CTRL_0,
+		   1, MT6380_MLDO_CON_0, 0xE000, MT6380_ANA_CTRL_1, 0x4000000),
+	MT6380_LDO("ldo-va", VALDO, ldo_volt_table2, MT6380_LDO_CTRL_0,
+		   2, MT6380_ALDO_CON_0, 0x400, MT6380_ALDO_CON_0, 0x20),
+	MT6380_REG_FIXED("ldo-vphy", VPHYLDO, MT6380_LDO_CTRL_0, 7, 1800000,
+			 MT6380_PHYLDO_CON_0, 0x80),
+	MT6380_LDO("ldo-vddr", VDDRLDO, ldo_volt_table3, MT6380_LDO_CTRL_0,
+		   8, MT6380_DDRLDO_CON_0, 0x3000, MT6380_DDRLDO_CON_0, 0x80),
+	MT6380_LDO("ldo-vt", VTLDO, ldo_volt_table4, MT6380_LDO_CTRL_0, 3,
+		   MT6380_TLDO_CON_0, 0x400, MT6380_TLDO_CON_0, 0x20),
+};
+
+static int mt6380_regulator_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	for (i = 0; i < MT6380_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6380_regulators[i];
+		config.regmap = regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+					       &mt6380_regulators[i].desc,
+				&config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6380_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6380_platform_ids[] = {
+	{"mt6380-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6380_platform_ids);
+
+static const struct of_device_id mt6380_of_match[] = {
+	{ .compatible = "mediatek,mt6380-regulator", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt6380_of_match);
+
+static struct platform_driver mt6380_regulator_driver = {
+	.driver = {
+		.name = "mt6380-regulator",
+		.of_match_table = of_match_ptr(mt6380_of_match),
+	},
+	.probe = mt6380_regulator_probe,
+	.id_table = mt6380_platform_ids,
+};
+
+module_platform_driver(mt6380_regulator_driver);
+
+MODULE_AUTHOR("Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6380 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/mt6380-regulator.h b/include/linux/regulator/mt6380-regulator.h
new file mode 100644
index 0000000..465182d
--- /dev/null
+++ b/include/linux/regulator/mt6380-regulator.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_mt6380_H
+#define __LINUX_REGULATOR_mt6380_H
+
+enum {
+	MT6380_ID_VCPU = 0,
+	MT6380_ID_VCORE,
+	MT6380_ID_VRF,
+	MT6380_ID_VMLDO,
+	MT6380_ID_VALDO,
+	MT6380_ID_VPHYLDO,
+	MT6380_ID_VDDRLDO,
+	MT6380_ID_VTLDO,
+	MT6380_ID_RG_MAX,
+};
+
+#define MT6380_MAX_REGULATOR	MT6380_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_mt6380_H */
-- 
2.7.4