From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v5 6/6] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
Date: Sun, 28 Jul 2019 11:12:27 +0800 [thread overview]
Message-ID: <20190728031227.49140-7-icenowy@aosc.io> (raw)
In-Reply-To: <20190728031227.49140-1-icenowy@aosc.io>
Lichee zero plus is a core board made by Sipeed, which includes on-board
TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
header, a microUSB slot and a gold finger connector for expansion. It
can use either Sochip S3 or Allwinner S3L SoC.
Add the basic device tree for the core board, w/o optional onboard
storage, and with S3 SoC.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v5:
- Added missing compatible string.
- Set default USB role to "peripheral".
- Switch to use V3 DTSI.
No changes in v4.
Changes in v3:
- Drop common regulator DTSI usage and added vcc3v3 regulator.
Patch introduced in v2.
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/sun8i-s3-lichee-zero-plus.dts | 53 +++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bef2b6e2392d..ef937988b30e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1120,6 +1120,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-s3-lichee-zero-plus.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000000..d18192d51d1b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Sipeed Lichee Zero Plus";
+ compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+ "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
2.21.0
next prev parent reply other threads:[~2019-07-28 3:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-28 3:12 [PATCH v5 0/6] Support for Allwinner V3/S3L and Sochip S3 Icenowy Zheng
2019-07-28 3:12 ` [PATCH v5 1/6] pinctrl: sunxi: v3s: introduce support for V3 Icenowy Zheng
2019-08-05 10:36 ` Linus Walleij
2019-07-28 3:12 ` [PATCH v5 2/6] clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks Icenowy Zheng
2019-07-28 3:12 ` [PATCH v5 3/6] clk: sunxi-ng: v3s: add Allwinner V3 support Icenowy Zheng
2019-07-28 3:12 ` [PATCH v5 4/6] ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs Icenowy Zheng
2019-07-28 3:12 ` [PATCH v5 5/6] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board Icenowy Zheng
2019-07-28 3:12 ` Icenowy Zheng [this message]
2019-08-12 8:07 ` [PATCH v5 0/6] Support for Allwinner V3/S3L and Sochip S3 Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190728031227.49140-7-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).