[PATCH] pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control

[PATCH] pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control

[Geert Uytterhoeven]

R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019
changed the configuration bits for drive and bias control for the
DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3.
Update the driver to reflect this.

After this, the handling of drive and bias control for the various
DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W,
M3-W+, and M3-N SoCs.

Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in sh-pfc-for-v5.6.

 drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
index 8bdf33c807f6c7f4..6616f5210b9d96d4 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
@@ -5998,7 +5998,7 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
 		{ PIN_DU_DOTCLKIN1,    0, 2 },	/* DU_DOTCLKIN1 */
 	} },
 	{ PINMUX_DRIVE_REG("DRVCTRL12", 0xe6060330) {
-		{ PIN_DU_DOTCLKIN3,   28, 2 },	/* DU_DOTCLKIN3 */
+		{ PIN_DU_DOTCLKIN3,   24, 2 },	/* DU_DOTCLKIN3 */
 		{ PIN_FSCLKST,        20, 2 },	/* FSCLKST */
 		{ PIN_TMS,             4, 2 },	/* TMS */
 	} },
@@ -6254,8 +6254,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 		[31] = PIN_DU_DOTCLKIN1,	/* DU_DOTCLKIN1 */
 	} },
 	{ PINMUX_BIAS_REG("PUEN3", 0xe606040c, "PUD3", 0xe606044c) {
-		[ 0] = PIN_DU_DOTCLKIN3,	/* DU_DOTCLKIN3 */
-		[ 1] = SH_PFC_PIN_NONE,
+		[ 0] = SH_PFC_PIN_NONE,
+		[ 1] = PIN_DU_DOTCLKIN3,	/* DU_DOTCLKIN3 */
 		[ 2] = PIN_FSCLKST,		/* FSCLKST */
 		[ 3] = PIN_EXTALR,		/* EXTALR*/
 		[ 4] = PIN_TRST_N,		/* TRST# */
-- 
2.17.1