Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Lars Povlsen <lars.povlsen@microchip.com>
To: SoC Team <soc@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
	Olof Johansson <olof@lixom.net>,
	"Michael Turquette" <mturquette@baylibre.com>,
	<devicetree@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v4 00/10] Adding support for Microchip Sparx5 SoC
Date: Mon, 27 Jul 2020 10:42:01 +0200
Message-ID: <20200727084211.6632-1-lars.povlsen@microchip.com> (raw)

This patch series adds support for Microchip Sparx5 SoC, the CPU
system of a advanced, TSN capable gigabit switch. The CPU is an armv8
x 2 CPU core (A53).

Although this is an ARM core, it shares some peripherals with the
Microsemi Ocelot MIPS SoC.

NB: This version *only* updates the drivers/clk/clk-sparx5.c driver

Changes in v4:
- Updates to the clock driver per Stephen Boyd <sboyd@kernel.org>
 - Remove unused include of of_address.h
 - Remove unused member in s5_hw_clk struct
 - Changed type (to unsigned long) for freq in s5_pll_conf struct
 - Use .parent_data instead of looking up parent name
 - Use devm_of_clk_add_hw_provider
 - Some minor comsmetics

Changes in v3:
- a "gpio-restart" node has been added to the pcb134/pcb135 DT files.
- pinctrl-ocelot.c: ENOTSUPP replaced by EOPNOTSUPP. Fixed non-static
  ocelot_pinconf_set(), Fixed ocelot_hw_get_value() not returning proper
  read value.
- Rebased on v5.8-rc1

Changes in v2:
- Misc fixes to bindings/arm/microchip,sparx5.yaml
- Changed clock driver to platform driver, using bitfields, recalc
  properly implented, using proper clock parent.
- arch/arm64/boot/dts/microchip/sparx5.dtsi:
 - Added pmu and psci node, using PSCI
 - Updates to GICv3 register spaces (GICV/GICH)
 - Updated timer interrupt specifiers
- pinctrl: ocelot: Fixed symbol clashes from powerpc

Lars Povlsen (10):
  dt-bindings: arm: sparx5: Add documentation for Microchip Sparx5 SoC
  arm64: sparx5: Add support for Microchip 2xA53 SoC
  arm64: dts: sparx5: Add basic cpu support
  arm64: dts: sparx5: Add pinctrl support
  pinctrl: ocelot: Add Sparx5 SoC support
  dt-bindings: clock: sparx5: Add Sparx5 SoC DPLL clock
  dt-bindings: clock: sparx5: Add bindings include file
  clk: sparx5: Add Sparx5 SoC DPLL clock driver
  arm64: dts: sparx5: Add Sparx5 SoC DPLL clock
  arm64: dts: sparx5: Add i2c devices, i2c muxes

 .../bindings/arm/microchip,sparx5.yaml        |  65 +++
 .../bindings/clock/microchip,sparx5-dpll.yaml |  52 +++
 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 MAINTAINERS                                   |   9 +
 arch/arm64/Kconfig.platforms                  |  14 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/microchip/Makefile        |   4 +
 arch/arm64/boot/dts/microchip/sparx5.dtsi     | 213 +++++++++
 .../boot/dts/microchip/sparx5_pcb125.dts      |  21 +
 .../boot/dts/microchip/sparx5_pcb134.dts      |  17 +
 .../dts/microchip/sparx5_pcb134_board.dtsi    | 252 ++++++++++
 .../boot/dts/microchip/sparx5_pcb134_emmc.dts |  17 +
 .../boot/dts/microchip/sparx5_pcb135.dts      |  17 +
 .../dts/microchip/sparx5_pcb135_board.dtsi    |  92 ++++
 .../boot/dts/microchip/sparx5_pcb135_emmc.dts |  17 +
 .../boot/dts/microchip/sparx5_pcb_common.dtsi |  19 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-sparx5.c                      | 295 ++++++++++++
 drivers/pinctrl/pinctrl-ocelot.c              | 430 +++++++++++++++++-
 include/dt-bindings/clock/microchip,sparx5.h  |  23 +
 20 files changed, 1559 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
 create mode 100644 arch/arm64/boot/dts/microchip/Makefile
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5.dtsi
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
 create mode 100644 drivers/clk/clk-sparx5.c
 create mode 100644 include/dt-bindings/clock/microchip,sparx5.h

--
2.27.0

             reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-27  8:42 Lars Povlsen [this message]
2020-07-27  8:42 ` [PATCH v4 01/10] dt-bindings: arm: sparx5: Add documentation " Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 02/10] arm64: sparx5: Add support for Microchip 2xA53 SoC Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 03/10] arm64: dts: sparx5: Add basic cpu support Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 04/10] arm64: dts: sparx5: Add pinctrl support Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 05/10] pinctrl: ocelot: Add Sparx5 SoC support Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 06/10] dt-bindings: clock: sparx5: Add Sparx5 SoC DPLL clock Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 07/10] dt-bindings: clock: sparx5: Add bindings include file Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 08/10] clk: sparx5: Add Sparx5 SoC DPLL clock driver Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 09/10] arm64: dts: sparx5: Add Sparx5 SoC DPLL clock Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 10/10] arm64: dts: sparx5: Add i2c devices, i2c muxes Lars Povlsen
2020-07-27  9:50 ` [PATCH v4 00/10] Adding support for Microchip Sparx5 SoC Alexandre Belloni
2020-07-27 10:29   ` Lars Povlsen
2020-07-27 11:07     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200727084211.6632-1-lars.povlsen@microchip.com \
    --to=lars.povlsen@microchip.com \
    --cc=Steen.Hegelund@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git