* [PATCH] pinctrl: qcom: ipq8074: route gpio interrupts to APPS
@ 2020-07-07 4:58 Kathiravan T
2020-07-07 5:14 ` Bjorn Andersson
0 siblings, 1 reply; 3+ messages in thread
From: Kathiravan T @ 2020-07-07 4:58 UTC (permalink / raw)
To: agross, bjorn.andersson, linus.walleij, linux-arm-msm,
linux-gpio, linux-kernel
Cc: sivaprak, sricharan, Kathiravan T, Rajkumar Ayyasamy
set target proc as APPS to route the gpio interrupts to APPS
Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
---
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
index 0edd41c..aec68b1 100644
--- a/drivers/pinctrl/qcom/pinctrl-ipq8074.c
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
@@ -50,6 +50,7 @@
.intr_enable_bit = 0, \
.intr_status_bit = 0, \
.intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
.intr_raw_status_bit = 4, \
.intr_polarity_bit = 1, \
.intr_detection_bit = 2, \
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] pinctrl: qcom: ipq8074: route gpio interrupts to APPS
2020-07-07 4:58 [PATCH] pinctrl: qcom: ipq8074: route gpio interrupts to APPS Kathiravan T
@ 2020-07-07 5:14 ` Bjorn Andersson
2020-07-07 7:42 ` Kathiravan T
0 siblings, 1 reply; 3+ messages in thread
From: Bjorn Andersson @ 2020-07-07 5:14 UTC (permalink / raw)
To: Kathiravan T
Cc: agross, linus.walleij, linux-arm-msm, linux-gpio, linux-kernel,
sivaprak, sricharan, Rajkumar Ayyasamy
On Mon 06 Jul 21:58 PDT 2020, Kathiravan T wrote:
> set target proc as APPS to route the gpio interrupts to APPS
>
> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
> Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
This says "first Rajkumar certified the patch's origin, then you picked
it up and certified its origin". As such I would expect that Rajkumar is
the author of the patch.
If you both came up with the patch add a Co-developed-by: tag.
Regards,
Bjorn
> ---
> drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
> index 0edd41c..aec68b1 100644
> --- a/drivers/pinctrl/qcom/pinctrl-ipq8074.c
> +++ b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
> @@ -50,6 +50,7 @@
> .intr_enable_bit = 0, \
> .intr_status_bit = 0, \
> .intr_target_bit = 5, \
> + .intr_target_kpss_val = 3, \
> .intr_raw_status_bit = 4, \
> .intr_polarity_bit = 1, \
> .intr_detection_bit = 2, \
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] pinctrl: qcom: ipq8074: route gpio interrupts to APPS
2020-07-07 5:14 ` Bjorn Andersson
@ 2020-07-07 7:42 ` Kathiravan T
0 siblings, 0 replies; 3+ messages in thread
From: Kathiravan T @ 2020-07-07 7:42 UTC (permalink / raw)
To: Bjorn Andersson
Cc: agross, linus.walleij, linux-arm-msm, linux-gpio, linux-kernel,
sivaprak, sricharan, Rajkumar Ayyasamy
Hi Bjorn,
On 7/7/2020 10:44 AM, Bjorn Andersson wrote:
> On Mon 06 Jul 21:58 PDT 2020, Kathiravan T wrote:
>
>> set target proc as APPS to route the gpio interrupts to APPS
>>
>> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org>
>> Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
> This says "first Rajkumar certified the patch's origin, then you picked
> it up and certified its origin". As such I would expect that Rajkumar is
> the author of the patch.
>
> If you both came up with the patch add a Co-developed-by: tag.
>
> Regards,
> Bjorn
Thanks, fixed in V2.
>> ---
>> drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
>> index 0edd41c..aec68b1 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-ipq8074.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
>> @@ -50,6 +50,7 @@
>> .intr_enable_bit = 0, \
>> .intr_status_bit = 0, \
>> .intr_target_bit = 5, \
>> + .intr_target_kpss_val = 3, \
>> .intr_raw_status_bit = 4, \
>> .intr_polarity_bit = 1, \
>> .intr_detection_bit = 2, \
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-07 7:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-07 4:58 [PATCH] pinctrl: qcom: ipq8074: route gpio interrupts to APPS Kathiravan T
2020-07-07 5:14 ` Bjorn Andersson
2020-07-07 7:42 ` Kathiravan T
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).