From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Linus Walleij <linus.walleij@linaro.org>, linux-spi@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
linux-gpio@vger.kernel.org
Subject: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Date: Fri, 8 Nov 2019 13:33:26 +0100 [thread overview]
Message-ID: <e9981d69-2a33-fec9-7d12-15fcb948364d@c-s.fr> (raw)
Hi Linus,
With the above mentionned commit, I get a crash on boot:
[ 3.146041] ------------[ cut here ]------------
[ 3.150340] kernel BUG at lib/genalloc.c:516!
[ 3.154649] Oops: Exception in kernel mode, sig: 5 [#1]
[ 3.159821] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 3.164053] CPU: 0 PID: 1 Comm: swapper Not tainted
5.4.0-rc5-s3k-dev-00785-gab26ba2f2775 #2471
[ 3.172630] NIP: c0249054 LR: c0249054 CTR: 00000000
[ 3.177631] REGS: c60e1c50 TRAP: 0700 Not tainted
(5.4.0-rc5-s3k-dev-00785-gab26ba2f2775)
[ 3.185953] MSR: 00021032 <ME,IR,DR,RI> CR: 24002422 XER: 20000000
[ 3.192322]
[ 3.192322] GPR00: c0249054 c60e1d08 c60d4000 c600c200 00009d80
00000000 00000000 00000000
[ 3.192322] GPR08: 00000000 00000000 00009bbf 000affff 24000422
00000000 c0003890 00000000
[ 3.192322] GPR16: 00000000 00000000 00000000 00000000 00000000
00000000 c0800000 0000009e
[ 3.192322] GPR24: c0852778 00000000 00000000 00000000 00000000
c600c200 00009d80 c600c200
[ 3.227053] NIP [c0249054] gen_pool_free_owner+0xfc/0x100
[ 3.232377] LR [c0249054] gen_pool_free_owner+0xfc/0x100
[ 3.237588] Call Trace:
[ 3.240037] [c60e1d08] [c0249054] gen_pool_free_owner+0xfc/0x100
(unreliable)
[ 3.247113] [c60e1d38] [c0299020] cpm_muram_free+0x84/0xf4
[ 3.252517] [c60e1d58] [c030e7a4] fsl_spi_cpm_free+0x94/0x100
[ 3.258198] [c60e1d68] [c030f2d4] of_fsl_spi_probe+0x260/0x3a0
[ 3.263965] [c60e1db8] [c02c5458] platform_drv_probe+0x44/0xa4
[ 3.269754] [c60e1dc8] [c02c35fc] really_probe+0x1ac/0x418
[ 3.275164] [c60e1df8] [c02c407c] device_driver_attach+0x88/0x90
[ 3.281099] [c60e1e18] [c02c4124] __driver_attach+0xa0/0x154
[ 3.286691] [c60e1e38] [c02c165c] bus_for_each_dev+0x64/0xb4
[ 3.292284] [c60e1e68] [c02c2038] bus_add_driver+0xe0/0x218
[ 3.297783] [c60e1e88] [c02c48dc] driver_register+0x84/0x148
[ 3.303394] [c60e1e98] [c06d8d30] do_one_initcall+0x8c/0x1cc
[ 3.308978] [c60e1ef8] [c06d8fac] kernel_init_freeable+0x13c/0x1ec
[ 3.315087] [c60e1f28] [c00038a4] kernel_init+0x14/0x110
[ 3.320342] [c60e1f38] [c000e1cc] ret_from_kernel_thread+0x14/0x1c
[ 3.326401] Instruction dump:
[ 3.329337] 40a2fff4 4192000c 813f0010 913a0000 80010034 81810010
7c0803a6 bb210014
[ 3.336994] 7d808120 38210030 4be1d7a8 4be1d7a5 <0fe00000> 7c0802a6
9421ffe0 bf810010
[ 3.344864] ---[ end trace 2200b36c5d6384b0 ]---
[ 3.349380]
[ 4.320994] note: swapper[1] exited with preempt_count 1
[ 4.326187] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000005
[ 4.333602] Rebooting in 180 seconds..
Reverting 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
solves the issue.
Renaming the gpios item to cs-gpios in the devicetree fixes the crash on
boot but the following warning appears during boot and SPI doesn't work
(can't read board temperature on LM74 chip):
[ 3.145635] ------------[ cut here ]------------
[ 3.150048] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-fsl-spi.c:716
fsl_spi_cs_control+0x64/0x7c
[ 3.158715] CPU: 0 PID: 1 Comm: swapper Not tainted
5.4.0-rc5-s3k-dev-00785-gab26ba2f2775 #2473
[ 3.167296] NIP: c030ee68 LR: c030ee3c CTR: c030ee04
[ 3.172295] REGS: c60e1bd0 TRAP: 0700 Not tainted
(5.4.0-rc5-s3k-dev-00785-gab26ba2f2775)
[ 3.180618] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24004842 XER: 20000000
[ 3.187246]
[ 3.187246] GPR00: c030fbd4 c60e1c88 c60d4000 c6211c50 00000000
00000000 07de2900 c61f2210
[ 3.187246] GPR08: 00001208 c61f2210 00001200 000affff 24004848
00000000 c0003890 00000000
[ 3.187246] GPR16: 00000000 00000000 00000000 c7fdd478 c06aa8dc
c06b0000 c06aa7f8 c06aa804
[ 3.187246] GPR24: c06aa810 c06aa81c 00000000 c61f2210 c07b72fc
00000000 c6244a40 00000000
[ 3.221966] NIP [c030ee68] fsl_spi_cs_control+0x64/0x7c
[ 3.227126] LR [c030ee3c] fsl_spi_cs_control+0x38/0x7c
[ 3.232167] Call Trace:
[ 3.234616] [c60e1c98] [c030fbd4] fsl_spi_setup+0xc4/0x148
[ 3.240070] [c60e1cb8] [c030c45c] spi_setup+0xd0/0x1c4
[ 3.245129] [c60e1cd8] [c030c5f4] spi_add_device+0xa4/0x190
[ 3.250640] [c60e1cf8] [c030d0ec] spi_register_controller+0x75c/0xb50
[ 3.257009] [c60e1d48] [c030d520] devm_spi_register_controller+0x40/0x98
[ 3.263619] [c60e1d68] [c030f354] of_fsl_spi_probe+0x2e0/0x3a0
[ 3.269388] [c60e1db8] [c02c5458] platform_drv_probe+0x44/0xa4
[ 3.275178] [c60e1dc8] [c02c35fc] really_probe+0x1ac/0x418
[ 3.280587] [c60e1df8] [c02c407c] device_driver_attach+0x88/0x90
[ 3.286523] [c60e1e18] [c02c4124] __driver_attach+0xa0/0x154
[ 3.292115] [c60e1e38] [c02c165c] bus_for_each_dev+0x64/0xb4
[ 3.297708] [c60e1e68] [c02c2038] bus_add_driver+0xe0/0x218
[ 3.303205] [c60e1e88] [c02c48dc] driver_register+0x84/0x148
[ 3.308815] [c60e1e98] [c06d8d30] do_one_initcall+0x8c/0x1cc
[ 3.314400] [c60e1ef8] [c06d8fac] kernel_init_freeable+0x13c/0x1ec
[ 3.320508] [c60e1f28] [c00038a4] kernel_init+0x14/0x110
[ 3.325762] [c60e1f38] [c000e1cc] ret_from_kernel_thread+0x14/0x1c
[ 3.331824] Instruction dump:
[ 3.334759] 4bfffab1 80830018 2f840000 419e0024 80010014 215f0000
7c0803a6 83e1000c
[ 3.342416] 7c631910 54630000 38210010 4bcffa84 <0fe00000> 80010014
83e1000c 7c0803a6
[ 3.350277] ---[ end trace 15d6993a62672e78 ]---
Any idea ?
Thanks,
Christophe
next reply other threads:[~2019-11-08 12:33 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-08 12:33 Christophe Leroy [this message]
2019-11-08 13:09 ` Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Linus Walleij
2019-11-08 13:34 ` Christophe Leroy
2019-11-26 15:01 ` Christophe Leroy
2019-11-26 15:35 ` Fabio Estevam
2019-11-26 16:16 ` Christophe Leroy
2019-11-26 16:23 ` Mark Brown
2019-11-26 15:48 ` Linus Walleij
2019-11-26 19:08 ` Christophe Leroy
2019-11-26 19:14 ` Christophe Leroy
2019-11-27 8:26 ` Linus Walleij
2019-11-27 8:57 ` Christophe Leroy
2019-11-27 9:07 ` Christophe Leroy
2019-11-27 9:11 ` Linus Walleij
2019-11-27 9:34 ` Christophe Leroy
2019-11-27 10:02 ` Linus Walleij
2019-11-27 10:39 ` Christophe Leroy
2019-11-27 10:55 ` Linus Walleij
2019-11-27 12:04 ` Christophe Leroy
2019-11-27 13:00 ` Linus Walleij
2019-11-27 13:44 ` Christophe Leroy
2019-11-27 13:52 ` Linus Walleij
2019-11-27 13:54 ` Christophe Leroy
2019-11-27 13:56 ` Linus Walleij
2019-11-27 14:29 ` Christophe Leroy
2019-11-28 8:42 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e9981d69-2a33-fec9-7d12-15fcb948364d@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).