From: Jeff LaBundy <jeff@labundy.com>
To: lee.jones@linaro.org, dmitry.torokhov@gmail.com,
jdelvare@suse.com, linux@roeck-us.net, thierry.reding@gmail.com,
jic23@kernel.org, devicetree@vger.kernel.org
Cc: linux-input@vger.kernel.org, linux-hwmon@vger.kernel.org,
u.kleine-koenig@pengutronix.de, linux-pwm@vger.kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-iio@vger.kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH 0/8] Add support for Azoteq IQS620A/621/622/624/625
Date: Sun, 20 Oct 2019 23:11:15 -0500 [thread overview]
Message-ID: <1571631083-4962-1-git-send-email-jeff@labundy.com> (raw)
This series adds support for six-channel members of the Azoteq ProxFusion
family of sensor devices: IQS620A, IQS621, IQS622, IQS624 and IQS625. Each
device integrates multiple sensor technologies in a single package.
A multi-function device (MFD) driver supports core functions common to all
devices, including device identification, firmware, interrupt handling and
runtime power management. The MFD driver is also responsible for adding all
product-specific sub-devices.
Each device supports self-capacitive, Hall-effect, and (in some cases) mutual-
inductive sensing. These functions represent keys or switches and are supported
by an input driver that covers all five devices. An assortment of pwm, hwmon
and iio drivers support device-specific functions.
This series was tested using the following development hardware: IQS620AEV04,
IQS621EV04, IQS622EV04 and IQS624/5EV04.
Jeff LaBundy (8):
dt-bindings: mfd: iqs62x: Add bindings
mfd: Add support for Azoteq IQS620A/621/622/624/625
input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
hwmon: Add support for Azoteq IQS620AT temperature sensor
pwm: Add support for Azoteq IQS620A PWM generator
iio: light: Add support for Azoteq IQS621 ambient light sensor
iio: proximity: Add support for Azoteq IQS622 proximity sensor
iio: position: Add support for Azoteq IQS624/625 angle sensor
Documentation/devicetree/bindings/mfd/iqs62x.txt | 242 +++++++++
drivers/hwmon/Kconfig | 12 +-
drivers/hwmon/Makefile | 1 +
drivers/hwmon/iqs620at-temp.c | 96 ++++
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/light/Kconfig | 10 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/iqs621-als.c | 361 +++++++++++++
drivers/iio/position/Kconfig | 19 +
drivers/iio/position/Makefile | 7 +
drivers/iio/position/iqs624-pos.c | 302 +++++++++++
drivers/iio/proximity/Kconfig | 10 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/iqs622-prox.c | 334 ++++++++++++
drivers/input/keyboard/Kconfig | 10 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/iqs62x-keys.c | 340 ++++++++++++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 2 +
drivers/mfd/iqs62x-core.c | 638 +++++++++++++++++++++++
drivers/mfd/iqs62x-tables.c | 424 +++++++++++++++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-iqs620a.c | 167 ++++++
include/linux/mfd/iqs62x.h | 148 ++++++
26 files changed, 3151 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.txt
create mode 100644 drivers/hwmon/iqs620at-temp.c
create mode 100644 drivers/iio/light/iqs621-als.c
create mode 100644 drivers/iio/position/Kconfig
create mode 100644 drivers/iio/position/Makefile
create mode 100644 drivers/iio/position/iqs624-pos.c
create mode 100644 drivers/iio/proximity/iqs622-prox.c
create mode 100644 drivers/input/keyboard/iqs62x-keys.c
create mode 100644 drivers/mfd/iqs62x-core.c
create mode 100644 drivers/mfd/iqs62x-tables.c
create mode 100644 drivers/pwm/pwm-iqs620a.c
create mode 100644 include/linux/mfd/iqs62x.h
--
2.7.4
next reply other threads:[~2019-10-21 4:19 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 4:11 Jeff LaBundy [this message]
2019-10-21 4:11 ` [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings Jeff LaBundy
2019-10-22 11:00 ` Jonathan Cameron
2019-10-23 3:36 ` Jeff LaBundy
2019-10-23 9:30 ` Lee Jones
2019-10-24 2:38 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625 Jeff LaBundy
2019-10-31 13:44 ` Lee Jones
2019-10-31 18:42 ` Dmitry Torokhov
2019-11-01 4:59 ` Jeff LaBundy
2019-11-01 8:56 ` Lee Jones
2019-11-02 2:49 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 3/8] input: keyboard: " Jeff LaBundy
2019-10-23 0:22 ` Dmitry Torokhov
2019-10-23 1:29 ` Jeff LaBundy
2019-10-23 23:08 ` Dmitry Torokhov
2019-10-21 4:11 ` [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor Jeff LaBundy
2019-10-21 15:38 ` Guenter Roeck
2019-10-22 2:26 ` Jeff LaBundy
2019-10-22 3:22 ` Guenter Roeck
2019-10-22 11:38 ` Jonathan Cameron
2019-10-23 2:04 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator Jeff LaBundy
2019-10-21 7:34 ` Uwe Kleine-König
2019-10-22 4:36 ` Jeff LaBundy
2019-10-22 6:54 ` Uwe Kleine-König
2019-10-23 2:45 ` Jeff LaBundy
2019-10-23 7:23 ` Uwe Kleine-König
2019-10-24 3:02 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor Jeff LaBundy
2019-10-22 11:23 ` Jonathan Cameron
2019-10-23 2:59 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor Jeff LaBundy
2019-10-22 11:23 ` Jonathan Cameron
2019-10-23 3:09 ` Jeff LaBundy
2019-10-21 4:11 ` [PATCH 8/8] iio: position: Add support for Azoteq IQS624/625 angle sensor Jeff LaBundy
2019-10-22 11:28 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571631083-4962-1-git-send-email-jeff@labundy.com \
--to=jeff@labundy.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jdelvare@suse.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).