Linux-Hwmon Archive on
 help / color / Atom feed
From: Guenter Roeck <>
To: Nicolin Chen <>
Subject: Re: ABI for these two registers?
Date: Thu, 12 Sep 2019 11:32:18 -0700
Message-ID: <> (raw)
In-Reply-To: <>

On Wed, Sep 11, 2019 at 05:28:14PM -0700, Nicolin Chen wrote:
> Hello Guenter,
> Datasheet:
> (At page 32, chapter and
> I have two registers that I need to expose to user space:
> 	Shunt-Voltage-Sum and Shunt-Voltage-Limit registers
> Right now in[123]_input of INA3221 are for voltage channels
> while in[456]_input are for Shunt voltage channels.
> So can I just use in7_input and in7_crit for them?
Doesn't Shunt-Voltage-Limit apply to in[456]_input ?
If so, the limit should be attached to those.
in7_input for Shunt-Voltage-Sum would be fine.


  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-12  0:28 Nicolin Chen
2019-09-12 18:32 ` Guenter Roeck [this message]
2019-09-12 21:09   ` Nicolin Chen
2019-09-12 22:09     ` Guenter Roeck
2019-09-12 22:45       ` Nicolin Chen
2019-09-13  0:12         ` Nicolin Chen

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox