Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: Clemens Ladisch <clemens@ladisch.de>,
	Jean Delvare <jdelvare@suse.com>,
	linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [RFT PATCH 4/4] hwmon: (k10temp) Show core and SoC current and voltages on Zen CPUs
Date: Thu, 16 Jan 2020 06:18:00 -0800
Message-ID: <20200116141800.9828-5-linux@roeck-us.net> (raw)
In-Reply-To: <20200116141800.9828-1-linux@roeck-us.net>

Zen CPUs report core and SoC voltages and currents. Add support for it
to the k10temp driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/k10temp.c | 116 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 113 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 944ba8008bc4..bce862bacbc5 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -11,6 +11,13 @@
  *   convert raw register values is from https://github.com/ocerman/zenpower.
  *   The information is not confirmed from chip datasheets, but experiments
  *   suggest that it provides reasonable temperature values.
+ * - Register addresses to read chip voltage and current is also from
+ *   https://github.com/ocerman/zenpower, and not confirmed from chip
+ *   datasheets. Experiments suggest that reported current and voltage
+ *   information is reasonable.
+ * - It is unknown if the mechanism to read CCD1/CCD2 temperature as well as
+ *   current and voltage information works on higher-end Ryzen CPUs, or if
+ *   additional information is available on those CPUs.
  */
 
 #include <linux/bitops.h>
@@ -70,6 +77,10 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 #define F17H_M70H_CCD1_TEMP			0x00059954
 #define F17H_M70H_CCD2_TEMP			0x00059958
 
+#define F17H_M01H_SVI				0x0005A000
+#define F17H_M01H_SVI_TEL_PLANE0		(F17H_M01H_SVI + 0xc)
+#define F17H_M01H_SVI_TEL_PLANE1		(F17H_M01H_SVI + 0x10)
+
 #define CUR_TEMP_SHIFT				21
 #define CUR_TEMP_RANGE_SEL_MASK			BIT(19)
 
@@ -82,6 +93,9 @@ struct k10temp_data {
 	bool show_tdie;
 	bool show_tccd1;
 	bool show_tccd2;
+	u32 svi_addr[2];
+	bool show_current;
+	int cfactor[2];
 };
 
 struct tctl_offset {
@@ -157,16 +171,76 @@ const char *k10temp_temp_label[] = {
 	"Tccd2",
 };
 
+const char *k10temp_in_label[] = {
+	"Vcore",
+	"Vsoc",
+};
+
+const char *k10temp_curr_label[] = {
+	"Icore",
+	"Isoc",
+};
+
 static int k10temp_read_labels(struct device *dev,
 			       enum hwmon_sensor_types type,
 			       u32 attr, int channel, const char **str)
 {
-	*str = k10temp_temp_label[channel];
+	switch (type) {
+	case hwmon_temp:
+		*str = k10temp_temp_label[channel];
+		break;
+	case hwmon_in:
+		*str = k10temp_in_label[channel];
+		break;
+	case hwmon_curr:
+		*str = k10temp_curr_label[channel];
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
 	return 0;
 }
 
-static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
-			u32 attr, int channel, long *val)
+static int k10temp_read_curr(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	u32 regval;
+
+	switch (attr) {
+	case hwmon_curr_input:
+		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+			     data->svi_addr[channel], &regval);
+		*val = DIV_ROUND_CLOSEST(data->cfactor[channel] *
+					 (regval & 0xff),
+					 1000);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int k10temp_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	u32 regval;
+
+	switch (attr) {
+	case hwmon_in_input:
+		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+			     data->svi_addr[channel], &regval);
+		regval = (regval >> 16) & 0xff;
+		*val = 1550 - DIV_ROUND_CLOSEST(625 * regval, 100);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
+			     long *val)
 {
 	struct k10temp_data *data = dev_get_drvdata(dev);
 	u32 regval;
@@ -216,6 +290,21 @@ static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
 	return 0;
 }
 
+static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return k10temp_read_temp(dev, attr, channel, val);
+	case hwmon_in:
+		return k10temp_read_in(dev, attr, channel, val);
+	case hwmon_curr:
+		return k10temp_read_curr(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t k10temp_is_visible(const void *_data,
 				  enum hwmon_sensor_types type,
 				  u32 attr, int channel)
@@ -290,6 +379,11 @@ static umode_t k10temp_is_visible(const void *_data,
 			return 0;
 		}
 		break;
+	case hwmon_in:
+	case hwmon_curr:
+		if (!data->show_current)
+			return 0;
+		break;
 	default:
 		return 0;
 	}
@@ -338,6 +432,12 @@ static const struct hwmon_channel_info *k10temp_info[] = {
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL),
 	NULL
 };
 
@@ -393,8 +493,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		case 0x8:	/* Zen+ */
 		case 0x11:	/* Zen APU */
 		case 0x18:	/* Zen+ APU */
+			data->show_current = true;
+			data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE0;
+			data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE1;
+			data->cfactor[0] = 1039211;	/* core */
+			data->cfactor[1] = 360772;	/* SoC */
 			break;
 		case 0x71:	/* Zen2 */
+			data->show_current = true;
+			data->cfactor[0] = 658823;	/* core */
+			data->cfactor[1] = 294300;	/* SoC */
+			data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE1;
+			data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE0;
 			amd_smn_read(amd_pci_dev_to_node_id(pdev),
 				     F17H_M70H_CCD1_TEMP, &regval);
 			if (regval & 0xfff)
-- 
2.17.1


  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 14:17 [RFT PATCH 0/4] hwmon: k10temp driver improvements Guenter Roeck
2020-01-16 14:17 ` [RFT PATCH 1/4] hwmon: (k10temp) Use bitops Guenter Roeck
2020-01-16 14:17 ` [RFT PATCH 2/4] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-16 14:17 ` [RFT PATCH 3/4] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-16 14:18 ` Guenter Roeck [this message]
2020-01-16 20:55 ` [RFT PATCH 0/4] hwmon: k10temp driver improvements Darren Salt
2020-01-16 21:11   ` Guenter Roeck
2020-01-16 22:46 ` Bernhard Gebetsberger
2020-01-16 22:52   ` Guenter Roeck
2020-01-17  0:38 ` Ken Moffat
2020-01-17  3:58   ` Guenter Roeck
2020-01-17  4:47     ` Ken Moffat
2020-01-17 14:14       ` Guenter Roeck
2020-01-17 18:58         ` Ken Moffat
2020-01-17  9:46 ` Ondrej Čerman
2020-01-17 18:46   ` Guenter Roeck
2020-01-17 22:48     ` Ondrej Čerman
2020-01-17  9:58 ` Holger Kiehl
2020-01-17 19:15 ` Sebastian Reichel
2020-01-18  8:52 ` Brad Campbell
2020-01-18 17:14   ` Guenter Roeck
2020-01-19  1:59     ` Brad Campbell

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116141800.9828-5-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=clemens@ladisch.de \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git