Re: [PATCH v2 1/4] dt-bindings: hwmon: adi,ltc2945: Add binding

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/12/2022 01:04, Cormier, Jonathan wrote:
> Create initial binding for the LTC2945 I2C power monitor.
> Also adds shunt-resistor-micro-ohms parameter

The last sentence does not make sense. I propose to skip it.

> 
> Signed-off-by: "Cormier, Jonathan" <jcormier@criticallink.com>
> ---
>  .../bindings/hwmon/adi,ltc2945.yaml           | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
> new file mode 100644
> index 000000000000..f90d40919ee6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices LTC2945 wide range i2c power monitor
> +
> +maintainers:
> +  - Guenter Roeck <linux@roeck-us.net>

Maintainer of binding is person interested in the device, e.g. having
the hardware or datasheet. Not the subsystem maintainer. Unless by
coincidence this is the same person here?

> +
> +description: |
> +  Analog Devices LTC2945 wide range i2c power monitor over I2C.
> +
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ltc2945
> +
> +  reg:
> +    maxItems: 1
> +
> +  shunt-resistor-micro-ohms:
> +    description:
> +      Shunt resistor value in micro-Ohms
> +    default: 1000
> +
> +required:
> +  - compatible
> +  - reg
> +
> +
This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +additionalProperties: false
> +

Best regards,
Krzysztof