From: Jon Cormier <jcormier@criticallink.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: linux-hwmon@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Bob Duke <bduke@criticallink.com>,
John Pruitt <jpruitt@criticallink.com>
Subject: Re: [PATCH 1/2] dt-bindings: hwmon: adi,ltc2945: Add binding
Date: Thu, 15 Dec 2022 09:37:27 -0500 [thread overview]
Message-ID: <CADL8D3ZT5znWjhpQpv6u-LTJfHNpkSrHZ-j-Hh_cgCZyTKw=Pg@mail.gmail.com> (raw)
In-Reply-To: <CADL8D3ZUE5WbV0oS6hEVUNh9asrhTKQeGR4McR6Kh6qykSFw=Q@mail.gmail.com>
Resending reply in plain text
On Thu, Dec 15, 2022 at 9:35 AM Jon Cormier <jcormier@criticallink.com> wrote:
>
> On Thu, Dec 15, 2022 at 4:42 AM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 14/12/2022 23:07, Cormier, Jonathan wrote:
>>
>> Missing commit msg. Describe hardware.
>
> Thanks
>>
>>
>>
>>
>> > Signed-off-by: "Cormier, Jonathan" <jcormier@criticallink.com>
>> > ---
>> > .../bindings/hwmon/adi,ltc2945.yaml | 50 +++++++++++++++++++
>> > 1 file changed, 50 insertions(+)
>> > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
>> >
>> > diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
>> > new file mode 100644
>> > index 000000000000..9ca7a886dec8
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
>> > @@ -0,0 +1,50 @@
>> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> > +%YAML 1.2
>> > +---
>> > +$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml#
>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > +
>> > +title: Analog Devices LTC2945 wide range i2c power monitor
>> > +
>> > +maintainers:
>> > + - Guenter Roeck <linux@roeck-us.net>
>> > +
>> > +description: |
>> > + Analog Devices LTC2945 wide range i2c power monitor over I2C.
>> > +
>> > + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf
>> > +
>> > +properties:
>> > + compatible:
>> > + enum:
>> > + - ltc2945
>>
>> That's not a correct compatible. Missing vendor prefix.
>>
> Okay, I assume I'll need to update the driver as well to handle that.
>>
>> > +
>> > + reg:
>> > + maxItems: 1
>> > +
>> > + shunt-resistor-micro-ohms:
>> > + description:
>> > + Shunt resistor value in micro-Ohms
>> > + default: 1000
>> > +
>> > +required:
>> > + - compatible
>> > + - reg
>> > +
>> > +
>>
>> Just one blank line.
>>
>> > +additionalProperties: false
>> > +
>> > +examples:
>> > + - |
>> > + i2c {
>> > + #address-cells = <1>;
>> > + #size-cells = <0>;
>>
>> Use 4 spaces for example indentation.
>>
>> > +
>> > + ltc2945_i2c: ltc2945@6e {
>>
>> Node names should be generic.
>> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>>
>> > + compatible = "ltc2945";
>> > + reg = <0x6e>;
>> > + /* 10 milli-Ohm shunt resistor */
>> > + shunt-resistor-micro-ohms = <10000>;
>> > + };
>> > + };
>> > +...
>>
>> Best regards,
>> Krzysztof
>>
>
>
> --
> Jonathan Cormier
> Software Engineer
>
> Voice: 315.425.4045 x222
>
>
>
> http://www.CriticalLink.com
> 6712 Brooklawn Parkway, Syracuse, NY 13211
>
>
--
Jonathan Cormier
Software Engineer
Voice: 315.425.4045 x222
http://www.CriticalLink.com
6712 Brooklawn Parkway, Syracuse, NY 13211
next prev parent reply other threads:[~2022-12-15 14:37 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-14 22:07 [PATCH 0/2] hwmon: ltc2945: Add binding and shunt resistor support Cormier, Jonathan
2022-12-14 22:07 ` [PATCH 1/2] dt-bindings: hwmon: adi,ltc2945: Add binding Cormier, Jonathan
2022-12-15 9:42 ` Krzysztof Kozlowski
[not found] ` <CADL8D3ZUE5WbV0oS6hEVUNh9asrhTKQeGR4McR6Kh6qykSFw=Q@mail.gmail.com>
2022-12-15 14:37 ` Jon Cormier [this message]
2022-12-14 22:07 ` [PATCH 2/2] hwmon: ltc2945: Allow setting shunt resistor Cormier, Jonathan
2022-12-15 15:11 ` Guenter Roeck
2022-12-15 19:42 ` Jon Cormier
2023-01-09 23:35 ` [PATCH v3 0/2] hwmon: ltc2945: Add binding and shunt resistor support Jonathan Cormier
2023-01-09 23:35 ` [PATCH v3 1/5] dt-bindings: hwmon: adi,ltc2945: Add binding Jonathan Cormier
2023-01-10 9:07 ` Krzysztof Kozlowski
2023-01-09 23:35 ` [PATCH v3 2/5] hwmon: ltc2945: Add devicetree match table Jonathan Cormier
2023-01-09 23:35 ` [PATCH v3 3/5] hwmon: ltc2945: Handle error case in ltc2945_value_store Jonathan Cormier
2023-01-10 0:04 ` Guenter Roeck
2023-01-10 18:19 ` Jon Cormier
2023-01-10 18:22 ` Guenter Roeck
2023-01-10 19:25 ` Jon Cormier
2023-01-12 0:44 ` Guenter Roeck
2023-01-18 18:32 ` Jon Cormier
2023-01-09 23:35 ` [PATCH v3 4/5] hwmon: ltc2945: Allow setting shunt resistor Jonathan Cormier
2023-01-09 23:35 ` [PATCH v3 5/5] hwmon: ltc2945: Convert division to DIV_ROUND_CLOSEST_ULL Jonathan Cormier
2022-12-20 0:04 ` [PATCH v2 0/2] hwmon: ltc2945: Add binding and shunt resistor support Cormier, Jonathan
2022-12-20 0:04 ` [PATCH v2 1/4] dt-bindings: hwmon: adi,ltc2945: Add binding Cormier, Jonathan
2022-12-20 10:15 ` Krzysztof Kozlowski
2022-12-20 14:35 ` Jon Cormier
2022-12-20 14:46 ` Guenter Roeck
2022-12-20 21:47 ` Jon Cormier
2022-12-20 0:04 ` [PATCH v2 2/4] hwmon: ltc2945: Add devicetree match table Cormier, Jonathan
2022-12-28 16:43 ` Guenter Roeck
2022-12-20 0:04 ` [PATCH v2 3/4] hwmon: ltc2945: Allow setting shunt resistor Cormier, Jonathan
2022-12-28 16:49 ` Guenter Roeck
2022-12-20 0:04 ` [PATCH v2 4/4] hwmon: ltc2945: Fix possible overflows Cormier, Jonathan
2022-12-28 17:01 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADL8D3ZT5znWjhpQpv6u-LTJfHNpkSrHZ-j-Hh_cgCZyTKw=Pg@mail.gmail.com' \
--to=jcormier@criticallink.com \
--cc=bduke@criticallink.com \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=jpruitt@criticallink.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).