From: Akash Asthana <akashast@codeaurora.org>
To: gregkh@linuxfoundation.org, agross@kernel.org,
bjorn.andersson@linaro.org, wsa@the-dreams.de,
broonie@kernel.org, mark.rutland@arm.com, robh+dt@kernel.org
Cc: linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, swboyd@chromium.org,
mgautam@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-serial@vger.kernel.org, mka@chromium.org,
dianders@chromium.org, evgreen@chromium.org,
georgi.djakov@linaro.org, Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH V5 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
Date: Fri, 8 May 2020 12:03:39 +0530 [thread overview]
Message-ID: <1588919619-21355-8-git-send-email-akashast@codeaurora.org> (raw)
In-Reply-To: <1588919619-21355-1-git-send-email-akashast@codeaurora.org>
Add interconnect ports for GENI QUPs and QSPI to set bus capabilities.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
Changes in V2:
- As per Bjorn's comment, ignoring 80 char limit in defining interconnects
paths.
Changes in V3:
- No change.
Change in V4:
- No change.
Changes in V5:
- No change.
arch/arm64/boot/dts/qcom/sc7180.dtsi | 127 +++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 4216b57..21ed9a1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -506,6 +506,8 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+ interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@@ -518,6 +520,11 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -531,6 +538,9 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -542,6 +552,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -555,6 +568,11 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -568,6 +586,9 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -579,6 +600,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -592,6 +616,11 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -603,6 +632,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -616,6 +648,11 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -629,6 +666,9 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -640,6 +680,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -653,6 +696,11 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -664,6 +712,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -677,6 +728,11 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+ <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -690,6 +746,9 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -701,6 +760,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
@@ -715,6 +777,8 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+ interconnect-names = "qup-core";
status = "disabled";
i2c6: i2c@a80000 {
@@ -727,6 +791,11 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -740,6 +809,9 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -751,6 +823,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -764,6 +839,11 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -775,6 +855,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -788,6 +871,11 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -801,6 +889,9 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -812,6 +903,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -825,6 +919,11 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -836,6 +935,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -849,6 +951,11 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -862,6 +969,9 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -873,6 +983,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -886,6 +999,11 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+ <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "qup-core", "qup-config",
+ "qup-memory";
status = "disabled";
};
@@ -899,6 +1017,9 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -910,6 +1031,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
@@ -1885,6 +2009,9 @@
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
+ interconnects = <&gem_noc MASTER_APPSS_PROC
+ &config_noc SLAVE_QSPI_0>;
+ interconnect-names = "qspi-config";
status = "disabled";
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
prev parent reply other threads:[~2020-05-08 6:35 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 6:33 [PATCH V5 0/7] Add interconnect support to QSPI and QUP drivers Akash Asthana
2020-05-08 6:33 ` [PATCH V5 1/7] soc: qcom: geni: Support for ICC voting Akash Asthana
2020-05-08 17:13 ` Matthias Kaehlcke
2020-05-12 14:02 ` Akash Asthana
2020-05-08 19:03 ` Matthias Kaehlcke
2020-05-12 14:26 ` Akash Asthana
2020-05-08 6:33 ` [PATCH V5 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash Akash Asthana
2020-05-08 17:59 ` Matthias Kaehlcke
2020-05-08 19:14 ` Matthias Kaehlcke
2020-05-14 7:03 ` Akash Asthana
2020-05-14 6:45 ` Akash Asthana
2020-05-09 12:11 ` Andy Shevchenko
2020-05-14 7:34 ` Akash Asthana
2020-05-08 6:33 ` [PATCH V5 3/7] i2c: i2c-qcom-geni: Add interconnect support Akash Asthana
2020-05-08 18:16 ` Matthias Kaehlcke
2020-05-15 10:03 ` Wolfram Sang
2020-05-08 6:33 ` [PATCH V5 4/7] spi: spi-geni-qcom: " Akash Asthana
2020-05-08 10:16 ` Mark Brown
2020-05-08 18:25 ` Matthias Kaehlcke
2020-05-14 7:37 ` Akash Asthana
2020-05-08 6:33 ` [PATCH V5 5/7] tty: serial: qcom_geni_serial: " Akash Asthana
2020-05-08 18:38 ` Matthias Kaehlcke
2020-05-08 6:33 ` [PATCH V5 6/7] spi: spi-qcom-qspi: " Akash Asthana
2020-05-08 10:16 ` Mark Brown
2020-05-08 18:53 ` Matthias Kaehlcke
2020-05-18 13:10 ` Akash Asthana
2020-05-08 6:33 ` Akash Asthana [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588919619-21355-8-git-send-email-akashast@codeaurora.org \
--to=akashast@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).