linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco
@ 2020-08-12 14:13 Miquel Raynal
  2020-08-12 14:13 ` [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding Miquel Raynal
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 14:13 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Thomas Petazzoni, Miquel Raynal, Conor Culhane

Silvaco, Inc. is an EDA provider of software tools used for process
and device development and for analog/mixed-signal, power IC and
memory design [1].

[1] https://www.silvaco.com/company/profile/profile.html

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---

Changes in v2:
* Change the prefix 'svc,' -> 'silvaco,'.

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f3d847832fdc..df780a2a5b78 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1014,6 +1014,8 @@ patternProperties:
     description: Shenzhen Sunchip Technology Co., Ltd
   "^SUNW,.*":
     description: Sun Microsystems, Inc
+  "^silvaco,.*":
+    description: Silvaco, Inc.
   "^swir,.*":
     description: Sierra Wireless
   "^syna,.*":
-- 
2.20.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding
  2020-08-12 14:13 [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Miquel Raynal
@ 2020-08-12 14:13 ` Miquel Raynal
  2020-08-24 23:24   ` Rob Herring
  2020-08-12 14:13 ` [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver Miquel Raynal
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 14:13 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Thomas Petazzoni, Miquel Raynal, Conor Culhane

Silvaco provide a dual-role I3C master.

Description is rather simple: it needs a register mapping, three
clocks and an interrupt.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---

Changes in v2:
* Updated Rob's tool and fixed the mistake reported.
* Updated the vendor prefix.

 .../bindings/i3c/silvaco,i3c-master.yaml      | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml

diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
new file mode 100644
index 000000000000..63731e8a9068
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/silvaco,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silvaco I3C master
+
+maintainers:
+  - Conor Culhane <conor.culhane@silvaco.com>
+
+properties:
+  compatible:
+    const: silvaco,i3c-master
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      There are three clocks:
+        pclk:     System clock
+        fast_clk: Fast clock (for the bus)
+        slow_clk: Slow clock (for other events)
+
+    items:
+      - const: pclk
+      - const: fast_clk
+      - const: slow_clk
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    i3c-master@a0000000 {
+        compatible = "silvaco,i3c-master";
+        clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
+        clock-names = "pclk", "fast_clk", "slow_clk";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        reg = <0xa0000000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
-- 
2.20.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver
  2020-08-12 14:13 [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Miquel Raynal
  2020-08-12 14:13 ` [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding Miquel Raynal
@ 2020-08-12 14:13 ` Miquel Raynal
  2020-08-12 15:18   ` Miquel Raynal
  2020-08-19  9:04   ` Boris Brezillon
  2020-08-12 14:13 ` [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master Miquel Raynal
  2020-08-24 23:21 ` [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Rob Herring
  3 siblings, 2 replies; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 14:13 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Thomas Petazzoni, Miquel Raynal, Conor Culhane

Add support for Silvaco I3C dual-role IP. The master role is supported
in SDR mode only. I2C transfers have not been tested but are shared
because they are so close to the I3C transfers in terms of registers
configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---

Changes in v2:
* Declared all the functions static (2 were missing).
* Catched errors reported by i3c_master_get_free_addr().
* Reworked the IBI handling to avoid sleeping.
* Updated the vendor prefix in the compatible and also use "silvaco"
  instead of "svc" in the driver's name.

 drivers/i3c/master/Kconfig          |    8 +
 drivers/i3c/master/Makefile         |    1 +
 drivers/i3c/master/svc-i3c-master.c | 1349 +++++++++++++++++++++++++++
 3 files changed, 1358 insertions(+)
 create mode 100644 drivers/i3c/master/svc-i3c-master.c

diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
index 4e80a1fcbf91..032b4de14277 100644
--- a/drivers/i3c/master/Kconfig
+++ b/drivers/i3c/master/Kconfig
@@ -21,3 +21,11 @@ config DW_I3C_MASTER
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called dw-i3c-master.
+
+config SVC_I3C_MASTER
+	tristate "Silvaco I3C Dual-Role Master driver"
+	depends on I3C
+	depends on HAS_IOMEM
+	depends on !(ALPHA || PARISC)
+	help
+	  Support for Silvaco I3C Dual-Role Master Controller.
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
index 7eea9e086144..69e5f5479df9 100644
--- a/drivers/i3c/master/Makefile
+++ b/drivers/i3c/master/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CDNS_I3C_MASTER)		+= i3c-master-cdns.o
 obj-$(CONFIG_DW_I3C_MASTER)		+= dw-i3c-master.o
+obj-$(CONFIG_SVC_I3C_MASTER)		+= svc-i3c-master.o
diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
new file mode 100644
index 000000000000..580400b6501c
--- /dev/null
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -0,0 +1,1349 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Silvaco dual-role I3C master driver
+ *
+ * Copyright (C) 2020 Silvaco
+ * Author: Miquel RAYNAL <miquel.raynal@bootlin.com>
+ * Based on a work from: Conor Culhane <conor.culhane@silvaco.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/i3c/master.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/* Master Mode Registers */
+#define SVC_I3C_MCONFIG      0x000
+#define   SVC_I3C_MCONFIG_MASTER_EN BIT(0)
+#define   SVC_I3C_MCONFIG_DISTO(x) FIELD_PREP(BIT(3), (x))
+#define   SVC_I3C_MCONFIG_HKEEP(x) FIELD_PREP(GENMASK(5, 4), (x))
+#define   SVC_I3C_MCONFIG_ODSTOP(x) FIELD_PREP(BIT(6), (x))
+#define   SVC_I3C_MCONFIG_PPBAUD(x) FIELD_PREP(GENMASK(11, 8), (x))
+#define   SVC_I3C_MCONFIG_PPLOW(x) FIELD_PREP(GENMASK(15, 12), (x))
+#define   SVC_I3C_MCONFIG_ODBAUD(x) FIELD_PREP(GENMASK(23, 16), (x))
+#define   SVC_I3C_MCONFIG_ODHPP(x) FIELD_PREP(BIT(24), (x))
+#define   SVC_I3C_MCONFIG_SKEW(x) FIELD_PREP(GENMASK(27, 25), (x))
+#define   SVC_I3C_MCONFIG_I2CBAUD(x) FIELD_PREP(GENMASK(31, 28), (x))
+
+#define SVC_I3C_MCTRL        0x084
+#define   SVC_I3C_MCTRL_REQUEST_START_ADDR    1
+#define   SVC_I3C_MCTRL_REQUEST_STOP          2
+#define   SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK   3
+#define   SVC_I3C_MCTRL_REQUEST_PROC_DAA      4
+#define   SVC_I3C_MCTRL_REQUEST_AUTO_IBI      7
+#define   SVC_I3C_MCTRL_TYPE_I3C 0
+#define   SVC_I3C_MCTRL_TYPE_I2C BIT(4)
+#define   SVC_I3C_MCTRL_IBIRESP_ACK_WITHOUT_BYTE 0
+#define   SVC_I3C_MCTRL_IBIRESP_ACK_WITH_BYTE BIT(7)
+#define   SVC_I3C_MCTRL_IBIRESP_NACK BIT(6)
+#define   SVC_I3C_MCTRL_IBIRESP_MANUAL GENMASK(7, 6)
+#define   SVC_I3C_MCTRL_DIR(x) FIELD_PREP(BIT(8), (x))
+#define   SVC_I3C_MCTRL_DIR_WRITE 0
+#define   SVC_I3C_MCTRL_DIR_READ 1
+#define   SVC_I3C_MCTRL_ADDR(x) FIELD_PREP(GENMASK(15, 9), (x))
+#define   SVC_I3C_MCTRL_RDTERM(x) FIELD_PREP(GENMASK(23, 16), (x))
+
+#define SVC_I3C_MSTATUS      0x088
+#define   SVC_I3C_MSTATUS_STATE(x) FIELD_GET(GENMASK(2, 0), (x))
+#define   SVC_I3C_MSTATUS_STATE_DAA(x) (SVC_I3C_MSTATUS_STATE(x) == 5)
+#define   SVC_I3C_MSTATUS_STATE_IDLE(x) (SVC_I3C_MSTATUS_STATE(x) == 0)
+#define   SVC_I3C_MSTATUS_BETWEEN(x) FIELD_GET(BIT(4), (x))
+#define   SVC_I3C_MSTATUS_NACKED(x) FIELD_GET(BIT(5), (x))
+#define   SVC_I3C_MSTATUS_IBITYPE(x) FIELD_GET(GENMASK(7, 6), (x))
+#define   SVC_I3C_MSTATUS_IBITYPE_IBI 1
+#define   SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST 2
+#define   SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN 3
+#define   SVC_I3C_MSTATUS_MCTRLDONE(x) FIELD_GET(BIT(9), (x))
+#define   SVC_I3C_MSTATUS_COMPLETE(x) FIELD_GET(BIT(10), (x))
+#define   SVC_I3C_MSTATUS_ERRWARN(x) FIELD_GET(BIT(15), (x))
+#define   SVC_I3C_MSTATUS_IBIADDR(x) FIELD_GET(GENMASK(30, 24), (x))
+
+#define SVC_I3C_IBIRULES     0x08C
+#define SVC_I3C_MINTSET      0x090
+#define SVC_I3C_MINTCLR      0x094
+#define SVC_I3C_MINTMASKED   0x098
+#define   SVC_I3C_MINT_SLVSTART BIT(8)
+#define   SVC_I3C_MINT_MCTRLDONE BIT(9)
+#define   SVC_I3C_MINT_RXPEND BIT(11)
+#define   SVC_I3C_MINT_TXNOTFULL BIT(12)
+#define   SVC_I3C_MINT_IBIWON BIT(13)
+
+#define SVC_I3C_MERRWARN     0x09C
+#define SVC_I3C_MDMACTRL     0x0A0
+#define SVC_I3C_MDATACTRL    0x0AC
+#define   SVC_I3C_MDATACTRL_FLUSHTB BIT(0)
+#define   SVC_I3C_MDATACTRL_FLUSHRB BIT(1)
+#define   SVC_I3C_MDATACTRL_UNLOCK_TRIG BIT(3)
+#define   SVC_I3C_MDATACTRL_TXTRIG_FIFO_NOT_FULL GENMASK(5, 4)
+#define   SVC_I3C_MDATACTRL_RXTRIG_FIFO_NOT_EMPTY 0
+#define   SVC_I3C_MDATACTRL_RXCOUNT(x) FIELD_GET(GENMASK(28, 24), (x))
+#define   SVC_I3C_MDATACTRL_TXFULL BIT(30)
+#define   SVC_I3C_MDATACTRL_RXEMPTY BIT(31)
+
+#define SVC_I3C_MWDATAB      0x0B0
+#define   SVC_I3C_MWDATAB_END BIT(8)
+
+#define SVC_I3C_MWDATABE     0x0B4
+#define SVC_I3C_MWDATAH      0x0B8
+#define SVC_I3C_MWDATAHE     0x0BC
+#define SVC_I3C_MRDATAB      0x0C0
+#define SVC_I3C_MRDATAH      0x0C8
+#define SVC_I3C_MWMSG_SDR    0x0D0
+#define SVC_I3C_MRMSG_SDR    0x0D4
+#define SVC_I3C_MWMSG_DDR    0x0D8
+#define SVC_I3C_MRMSG_DDR    0x0DC
+
+#define SVC_I3C_MDYNADDR     0x0E4
+#define   SVC_MDYNADDR_VALID BIT(0)
+#define   SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
+
+#define SVC_I3C_MAX_DEVS 32
+
+struct svc_i3c_cmd {
+	u8 addr;
+	bool rnw;
+	u8 *in;
+	const void *out;
+	unsigned int len;
+	unsigned int read_len;
+	bool continued;
+};
+
+struct svc_i3c_xfer {
+	struct list_head node;
+	struct completion comp;
+	int ret;
+	unsigned int type;
+	unsigned int ncmds;
+	struct svc_i3c_cmd cmds[];
+};
+
+/**
+ * struct svc_i3c_master - Silvaco I3C Master structure
+ * @base: I3C master controller
+ * @dev: Corresponding device
+ * @regs: Memory mapping
+ * @free_slots: Bit array of available slots
+ * @addrs: Array containing the dynamic addresses of each attached device
+ * @descs: Array of descriptors, one per attached device
+ * @hj_work: Hot-join work
+ * @irq: Main interrupt
+ * @pclk: System clock
+ * @fclk: Fast clock (bus)
+ * @sclk: Slow clock (other events)
+ * @xferqueue: Transfer queue structure
+ * @xferqueue.list: List member
+ * @xferqueue.cur: Current ongoing transfer
+ * @xferqueue.lock: Queue lock
+ * @ibi: IBI structure
+ * @ibi.num_slots: Number of slots available in @ibi.slots
+ * @ibi.slots: Available IBI slots
+ * @ibi.lock: IBI lock
+ * @bus_lock: Bus lock
+ */
+struct svc_i3c_master {
+	struct i3c_master_controller base;
+	struct device *dev;
+	void __iomem *regs;
+	u32 free_slots;
+	u8 addrs[SVC_I3C_MAX_DEVS];
+	struct i3c_dev_desc *descs[SVC_I3C_MAX_DEVS];
+	struct work_struct hj_work;
+	int irq;
+	struct clk *pclk;
+	struct clk *fclk;
+	struct clk *sclk;
+	struct {
+		struct list_head list;
+		struct svc_i3c_xfer *cur;
+		/* Prevent races between transfers */
+		spinlock_t lock;
+	} xferqueue;
+	struct {
+		unsigned int num_slots;
+		struct i3c_dev_desc **slots;
+		/* Prevent races within IBI handlers */
+		spinlock_t lock;
+	} ibi;
+};
+
+/**
+ * struct svc_i3c_i3c_dev_data - Device specific data
+ * @index: Index in the master tables corresponding to this device
+ * @ibi: IBI slot index in the master structure
+ * @ibi_pool: IBI pool associated to this device
+ */
+struct svc_i3c_i2c_dev_data {
+	u8 index;
+	int ibi;
+	struct i3c_generic_ibi_pool *ibi_pool;
+};
+
+static void svc_i3c_master_enable_interrupts(struct svc_i3c_master *master, u32 mask)
+{
+	writel(mask, master->regs + SVC_I3C_MINTSET);
+}
+
+static void svc_i3c_master_disable_interrupts(struct svc_i3c_master *master)
+{
+	u32 mask = readl(master->regs + SVC_I3C_MINTSET);
+
+	writel(mask, master->regs + SVC_I3C_MINTCLR);
+}
+
+static inline struct svc_i3c_master *
+to_svc_i3c_master(struct i3c_master_controller *master)
+{
+	return container_of(master, struct svc_i3c_master, base);
+}
+
+static void svc_i3c_master_hj(struct work_struct *work)
+{
+	struct svc_i3c_master *master;
+
+	master = container_of(work, struct svc_i3c_master, hj_work);
+	i3c_master_do_daa(&master->base);
+}
+
+static void svc_i3c_master_flush_fifo(struct svc_i3c_master *master)
+{
+	writel(SVC_I3C_MDATACTRL_FLUSHTB | SVC_I3C_MDATACTRL_FLUSHRB,
+	       master->regs + SVC_I3C_MDATACTRL);
+}
+
+static struct i3c_dev_desc *
+svc_i3c_master_dev_from_addr(struct svc_i3c_master *master,
+			     unsigned int ibiaddr)
+{
+	int i;
+
+	for (i = 0; i < SVC_I3C_MAX_DEVS; i++)
+		if (master->addrs[i] == ibiaddr)
+			break;
+
+	if (i == SVC_I3C_MAX_DEVS)
+		return NULL;
+
+	return master->descs[i];
+}
+
+static void svc_i3c_master_emit_stop(struct svc_i3c_master *master)
+{
+	writel(SVC_I3C_MCTRL_REQUEST_STOP, master->regs + SVC_I3C_MCTRL);
+}
+
+static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
+				     struct i3c_dev_desc *dev)
+{
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	struct i3c_ibi_slot *slot;
+	unsigned int count;
+	u32 mdatactrl;
+	int ret = 0;
+	u8 *buf;
+
+	spin_lock(&master->ibi.lock);
+
+	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
+	if (!slot) {
+		ret = -ENOSPC;
+		goto unlock;
+	}
+
+	slot->len = 0;
+	buf = slot->data;
+	while (readl(master->regs + SVC_I3C_MSTATUS) & SVC_I3C_MINT_RXPEND) {
+		mdatactrl = readl(master->regs + SVC_I3C_MDATACTRL);
+		count = SVC_I3C_MDATACTRL_RXCOUNT(mdatactrl);
+		readsl(master->regs + SVC_I3C_MRDATAB, buf, count);
+		slot->len += count;
+		buf += count;
+	}
+
+	i3c_master_queue_ibi(dev, slot);
+
+unlock:
+	spin_unlock(&master->ibi.lock);
+	svc_i3c_master_emit_stop(master);
+	svc_i3c_master_flush_fifo(master);
+
+	return ret;
+}
+
+static void svc_i3c_master_ack_ibi(struct svc_i3c_master *master,
+				   bool mandatory_byte)
+{
+	unsigned int ibi_ack_nack;
+
+	ibi_ack_nack = SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK;
+	if (mandatory_byte)
+		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITH_BYTE;
+	else
+		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITHOUT_BYTE;
+
+	writel(ibi_ack_nack, master->regs + SVC_I3C_MCTRL);
+}
+
+static void svc_i3c_master_nack_ibi(struct svc_i3c_master *master)
+{
+	writel(SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK |
+	       SVC_I3C_MCTRL_IBIRESP_NACK,
+	       master->regs + SVC_I3C_MCTRL);
+}
+
+static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id)
+{
+	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
+	u32 active = readl(master->regs + SVC_I3C_MINTMASKED);
+	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
+	unsigned int ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
+	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
+	struct i3c_dev_desc *dev;
+	bool rdata;
+
+	if (active & SVC_I3C_MINT_SLVSTART) {
+		writel(SVC_I3C_MINT_SLVSTART, master->regs + SVC_I3C_MSTATUS);
+		writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
+		       SVC_I3C_MCTRL_IBIRESP_MANUAL,
+		       master->regs + SVC_I3C_MCTRL);
+		return IRQ_HANDLED;
+	}
+
+	if (!(active & SVC_I3C_MINT_IBIWON))
+		return IRQ_NONE;
+
+	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
+
+	switch (ibitype) {
+	case SVC_I3C_MSTATUS_IBITYPE_IBI:
+		dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
+		if (WARN_ON(!dev)) {
+			svc_i3c_master_nack_ibi(master);
+			break;
+		}
+
+		rdata = dev->info.bcr & I3C_BCR_IBI_PAYLOAD;
+		svc_i3c_master_ack_ibi(master, rdata);
+		if (rdata) {
+			svc_i3c_master_disable_interrupts(master);
+			return IRQ_WAKE_THREAD;
+		}
+
+		break;
+	case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST:
+		svc_i3c_master_nack_ibi(master);
+		break;
+	case SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN:
+		svc_i3c_master_ack_ibi(master, false);
+		queue_work(master->base.wq, &master->hj_work);
+		break;
+	default:
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t svc_i3c_master_threaded_handler(int irq, void *dev_id)
+{
+	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
+	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
+	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
+	struct i3c_dev_desc *dev;
+
+	dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
+	if (WARN_ON(!dev)) {
+		svc_i3c_master_emit_stop(master);
+		svc_i3c_master_flush_fifo(master);
+		return IRQ_HANDLED;
+	}
+
+	svc_i3c_master_handle_ibi(master, dev);
+	svc_i3c_master_enable_interrupts(master,
+					 SVC_I3C_MINT_SLVSTART |
+					 SVC_I3C_MINT_IBIWON);
+
+	return IRQ_HANDLED;
+}
+
+static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
+{
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct i3c_bus *bus = i3c_master_get_bus(m);
+	struct i3c_device_info info = {};
+	unsigned long fclk_rate, fclk_period_ns;
+	unsigned int high_period_ns, od_low_period_ns;
+	u32 ppbaud, pplow, odhpp, odbaud, i2cbaud, reg;
+	int ret;
+
+	/* Timings derivation */
+	fclk_rate = clk_get_rate(master->fclk);
+	if (!fclk_rate)
+		return -EINVAL;
+
+	fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
+
+	/*
+	 * Using I3C Push-Pull mode, target is 12.5MHz/80ns period.
+	 * Simplest configuration is using a 50% duty-cycle of 40ns.
+	 */
+	ppbaud = DIV_ROUND_UP(40, fclk_period_ns) - 1;
+	pplow = 0;
+
+	/*
+	 * Using I3C Open-Drain mode, target is 4.17MHz/240ns with a
+	 * duty-cycle tuned so that high levels are filetered out by
+	 * the 50ns filter (target being 40ns).
+	 */
+	odhpp = 1;
+	high_period_ns = (ppbaud + 1) * fclk_period_ns;
+	odbaud = DIV_ROUND_UP(240 - high_period_ns, high_period_ns) - 1;
+	od_low_period_ns = (odbaud + 1) * high_period_ns;
+
+	switch (bus->mode) {
+	case I3C_BUS_MODE_PURE:
+		i2cbaud = 0;
+		break;
+	case I3C_BUS_MODE_MIXED_FAST:
+	case I3C_BUS_MODE_MIXED_LIMITED:
+		/*
+		 * Using I2C Fm+ mode, target is 1MHz/1000ns, the difference
+		 * between the high and low period does not really matter.
+		 */
+		i2cbaud = DIV_ROUND_UP(1000, od_low_period_ns) - 2;
+		break;
+	case I3C_BUS_MODE_MIXED_SLOW:
+		/*
+		 * Using I2C Fm mode, target is 0.4MHz/2500ns, with the same
+		 * constraints as the FM+ mode.
+		 */
+		i2cbaud = DIV_ROUND_UP(2500, od_low_period_ns) - 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = SVC_I3C_MCONFIG_MASTER_EN |
+	      SVC_I3C_MCONFIG_DISTO(0) |
+	      SVC_I3C_MCONFIG_HKEEP(0) |
+	      SVC_I3C_MCONFIG_ODSTOP(0) |
+	      SVC_I3C_MCONFIG_PPBAUD(ppbaud) |
+	      SVC_I3C_MCONFIG_PPLOW(pplow) |
+	      SVC_I3C_MCONFIG_ODBAUD(odbaud) |
+	      SVC_I3C_MCONFIG_ODHPP(odhpp) |
+	      SVC_I3C_MCONFIG_SKEW(0) |
+	      SVC_I3C_MCONFIG_I2CBAUD(i2cbaud);
+	writel(reg, master->regs + SVC_I3C_MCONFIG);
+
+	/* Master core's registration */
+	ret = i3c_master_get_free_addr(m, 0);
+	if (ret < 0)
+		return ret;
+
+	info.dyn_addr = ret;
+
+	writel(SVC_MDYNADDR_VALID | SVC_MDYNADDR_ADDR(info.dyn_addr),
+	       master->regs + SVC_I3C_MDYNADDR);
+
+	ret = i3c_master_set_info(&master->base, &info);
+	if (ret)
+		return ret;
+
+	svc_i3c_master_enable_interrupts(master,
+					 SVC_I3C_MINT_SLVSTART |
+					 SVC_I3C_MINT_IBIWON);
+
+	return 0;
+}
+
+static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
+{
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+
+	svc_i3c_master_disable_interrupts(master);
+
+	/* Disable master */
+	writel(0, master->regs + SVC_I3C_MCONFIG);
+}
+
+static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
+{
+	unsigned int slot;
+
+	if (!(master->free_slots & GENMASK(SVC_I3C_MAX_DEVS - 1, 0)))
+		return -ENOSPC;
+
+	slot = ffs(master->free_slots) - 1;
+
+	master->free_slots &= ~BIT(slot);
+
+	return slot;
+}
+
+static void svc_i3c_master_release_slot(struct svc_i3c_master *master,
+					unsigned int slot)
+{
+	master->free_slots |= BIT(slot);
+}
+
+static int svc_i3c_master_attach_i3c_dev(struct i3c_dev_desc *dev)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data;
+	int slot;
+
+	slot = svc_i3c_master_reserve_slot(master);
+	if (slot < 0)
+		return slot;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		svc_i3c_master_release_slot(master, slot);
+		return -ENOMEM;
+	}
+
+	data->ibi = -1;
+	data->index = slot;
+	master->addrs[slot] = dev->info.dyn_addr ? dev->info.dyn_addr :
+						   dev->info.static_addr;
+	master->descs[slot] = dev;
+
+	i3c_dev_set_master_data(dev, data);
+
+	return 0;
+}
+
+static int svc_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
+					   u8 old_dyn_addr)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+
+	master->addrs[data->index] = dev->info.dyn_addr ? dev->info.dyn_addr :
+							  dev->info.static_addr;
+
+	return 0;
+}
+
+static void svc_i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev)
+{
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+
+	svc_i3c_master_release_slot(master, data->index);
+
+	kfree(data);
+}
+
+static int svc_i3c_master_attach_i2c_dev(struct i2c_dev_desc *dev)
+{
+	struct i3c_master_controller *m = i2c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data;
+	int slot;
+
+	slot = svc_i3c_master_reserve_slot(master);
+	if (slot < 0)
+		return slot;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		svc_i3c_master_release_slot(master, slot);
+		return -ENOMEM;
+	}
+
+	data->index = slot;
+	master->addrs[slot] = dev->addr;
+
+	i2c_dev_set_master_data(dev, data);
+
+	return 0;
+}
+
+static void svc_i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
+{
+	struct svc_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev);
+	struct i3c_master_controller *m = i2c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+
+	svc_i3c_master_release_slot(master, data->index);
+
+	kfree(data);
+}
+
+static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
+					u8 *addrs, unsigned int *count)
+{
+	u64 prov_id[SVC_I3C_MAX_DEVS] = {}, nacking_prov_id = 0;
+	unsigned int dev_nb = 0, last_addr = 0;
+	u32 reg;
+	int ret, i;
+
+	while (true) {
+		/* Enter/proceed with DAA */
+		writel(SVC_I3C_MCTRL_REQUEST_PROC_DAA |
+		       SVC_I3C_MCTRL_TYPE_I3C |
+		       SVC_I3C_MCTRL_IBIRESP_MANUAL |
+		       SVC_I3C_MCTRL_DIR(SVC_I3C_MCTRL_DIR_WRITE),
+		       master->regs + SVC_I3C_MCTRL);
+
+		/*
+		 * Either one slave will send its ID, or the assignment process
+		 * is done.
+		 */
+		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
+					 reg & (SVC_I3C_MINT_RXPEND |
+						SVC_I3C_MINT_MCTRLDONE),
+					 1, 1000);
+		if (ret)
+			return ret;
+
+		if (reg & SVC_I3C_MINT_RXPEND) {
+			u8 datab;
+
+			/*
+			 * We only care about the 48-bit provisional ID yet to
+			 * be sure a device does not nack an address twice.
+			 * Otherwise, we would just need to flush the RX FIFO.
+			 */
+			for (i = 0; i < 6; i++) {
+				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
+							 reg,
+							 reg & SVC_I3C_MINT_RXPEND,
+							 0, 1000);
+				if (ret)
+					return ret;
+
+				datab = readl(master->regs + SVC_I3C_MRDATAB);
+				prov_id[dev_nb] |= (u64)(datab) << (8 * (5 - i));
+			}
+
+			/* We do not care about the BCR and DCR yet */
+			for (i = 0; i < 2; i++) {
+				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
+							 reg,
+							 reg & SVC_I3C_MINT_RXPEND,
+							 0, 1000);
+				if (ret)
+					return ret;
+
+				reg = readl(master->regs + SVC_I3C_MRDATAB);
+			}
+		} else if (SVC_I3C_MSTATUS_MCTRLDONE(reg)) {
+			if (SVC_I3C_MSTATUS_STATE_IDLE(reg) &&
+			    SVC_I3C_MSTATUS_COMPLETE(reg)) {
+				/*
+				 * All devices received and acked they dynamic
+				 * address, this is the natural end of the DAA
+				 * procedure.
+				 */
+				break;
+			} else if (SVC_I3C_MSTATUS_NACKED(reg)) {
+				/*
+				 * A slave device nacked the address, this is
+				 * allowed only once, DAA will be stopped and
+				 * then resumed. The same device is supposed to
+				 * answer again immediately and shall ack the
+				 * address this time.
+				 */
+				if (prov_id[dev_nb] == nacking_prov_id)
+					return -EIO;
+
+				dev_nb--;
+				nacking_prov_id = prov_id[dev_nb];
+				svc_i3c_master_emit_stop(master);
+
+				continue;
+			} else {
+				return -EIO;
+			}
+		}
+
+		/* Wait for the slave to be ready to receive its address */
+		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
+					 SVC_I3C_MSTATUS_MCTRLDONE(reg) &&
+					 SVC_I3C_MSTATUS_STATE_DAA(reg) &&
+					 SVC_I3C_MSTATUS_BETWEEN(reg),
+					 0, 1000);
+		if (ret)
+			return ret;
+
+		/* Give the slave device a suitable dynamic address */
+		ret = i3c_master_get_free_addr(&master->base, last_addr + 1);
+		if (ret < 0)
+			return ret;
+
+		addrs[dev_nb] = ret;
+
+		writel(addrs[dev_nb], master->regs + SVC_I3C_MWDATAB);
+		last_addr = addrs[dev_nb++];
+	}
+
+	*count = dev_nb;
+
+	return 0;
+}
+
+static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
+{
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	u8 addrs[SVC_I3C_MAX_DEVS];
+	unsigned long flags;
+	unsigned int dev_nb;
+	int ret, i;
+
+	spin_lock_irqsave(&master->xferqueue.lock, flags);
+	ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
+	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
+	if (ret)
+		goto emit_stop;
+
+	/* Register all devices who participated to the core */
+	for (i = 0; i < dev_nb; i++) {
+		ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
+		if (ret)
+			return ret;
+	}
+
+	i3c_master_enec_locked(m, I3C_BROADCAST_ADDR,
+			       I3C_CCC_EVENT_HJ |
+			       I3C_CCC_EVENT_MR |
+			       I3C_CCC_EVENT_SIR);
+
+	return 0;
+
+emit_stop:
+	svc_i3c_master_emit_stop(master);
+
+	return ret;
+}
+
+static int svc_i3c_master_read(struct svc_i3c_master *master,
+			       u8 *in, unsigned int len)
+{
+	int offset = 0, i, ret;
+	u32 mdctrl;
+
+	while (offset < len) {
+		unsigned int count;
+
+		ret = readl_poll_timeout(master->regs + SVC_I3C_MDATACTRL,
+					 mdctrl,
+					 !(mdctrl & SVC_I3C_MDATACTRL_RXEMPTY),
+					 0, 1000);
+		if (ret)
+			return ret;
+
+		count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
+		for (i = 0; i < count; i++)
+			in[offset + i] = readl(master->regs + SVC_I3C_MRDATAB);
+
+		offset += count;
+	}
+
+	return 0;
+}
+
+static int svc_i3c_master_write(struct svc_i3c_master *master,
+				const u8 *out, unsigned int len)
+{
+	int offset = 0, ret;
+	u32 mdctrl;
+
+	while (offset < len) {
+		ret = readl_poll_timeout(master->regs + SVC_I3C_MDATACTRL,
+					 mdctrl,
+					 !(mdctrl & SVC_I3C_MDATACTRL_TXFULL),
+					 0, 1000);
+		if (ret)
+			return ret;
+
+		/*
+		 * The last byte to be sent over the bus must either have the
+		 * "end" bit set or be written in MWDATABE.
+		 */
+		if (likely(offset < (len - 1)))
+			writel(out[offset++], master->regs + SVC_I3C_MWDATAB);
+		else
+			writel(out[offset++], master->regs + SVC_I3C_MWDATABE);
+	}
+
+	return 0;
+}
+
+static int svc_i3c_master_xfer(struct svc_i3c_master *master,
+			       bool rnw, unsigned int xfer_type, u8 addr,
+			       u8 *in, const u8 *out, unsigned int xfer_len,
+			       unsigned int read_len, bool continued)
+{
+	u32 reg;
+	int ret;
+
+	svc_i3c_master_flush_fifo(master);
+
+	writel(SVC_I3C_MCTRL_REQUEST_START_ADDR |
+	       xfer_type |
+	       SVC_I3C_MCTRL_IBIRESP_MANUAL |
+	       SVC_I3C_MCTRL_DIR(rnw) |
+	       SVC_I3C_MCTRL_ADDR(addr) |
+	       SVC_I3C_MCTRL_RDTERM(read_len),
+	       master->regs + SVC_I3C_MCTRL);
+
+	ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
+				 SVC_I3C_MSTATUS_MCTRLDONE(reg), 0, 1000);
+	if (ret)
+		goto emit_stop;
+
+	if (rnw)
+		ret = svc_i3c_master_read(master, in, xfer_len);
+	else
+		ret = svc_i3c_master_write(master, out, xfer_len);
+	if (ret)
+		goto emit_stop;
+
+	ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
+				 SVC_I3C_MSTATUS_COMPLETE(reg), 0, 1000);
+	if (ret)
+		goto emit_stop;
+
+	if (!continued)
+		svc_i3c_master_emit_stop(master);
+
+	return 0;
+
+emit_stop:
+	svc_i3c_master_emit_stop(master);
+
+	return ret;
+}
+
+static struct svc_i3c_xfer *
+svc_i3c_master_alloc_xfer(struct svc_i3c_master *master, unsigned int ncmds)
+{
+	struct svc_i3c_xfer *xfer;
+
+	xfer = kzalloc(struct_size(xfer, cmds, ncmds), GFP_KERNEL);
+	if (!xfer)
+		return NULL;
+
+	INIT_LIST_HEAD(&xfer->node);
+	xfer->ncmds = ncmds;
+	xfer->ret = -ETIMEDOUT;
+
+	return xfer;
+}
+
+static void svc_i3c_master_free_xfer(struct svc_i3c_xfer *xfer)
+{
+	kfree(xfer);
+}
+
+static void svc_i3c_master_dequeue_xfer_locked(struct svc_i3c_master *master,
+					       struct svc_i3c_xfer *xfer)
+{
+	if (master->xferqueue.cur == xfer)
+		master->xferqueue.cur = NULL;
+	else
+		list_del_init(&xfer->node);
+}
+
+static void svc_i3c_master_dequeue_xfer(struct svc_i3c_master *master,
+					struct svc_i3c_xfer *xfer)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&master->xferqueue.lock, flags);
+	svc_i3c_master_dequeue_xfer_locked(master, xfer);
+	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
+}
+
+static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
+{
+	struct svc_i3c_xfer *xfer = master->xferqueue.cur;
+	int ret, i;
+
+	if (!xfer)
+		return;
+
+	for (i = 0; i < xfer->ncmds; i++) {
+		struct svc_i3c_cmd *cmd = &xfer->cmds[i];
+
+		ret = svc_i3c_master_xfer(master, cmd->rnw, xfer->type,
+					  cmd->addr, cmd->in, cmd->out,
+					  cmd->len, cmd->read_len,
+					  cmd->continued);
+		if (ret)
+			break;
+	}
+
+	xfer->ret = ret;
+	complete(&xfer->comp);
+
+	if (ret < 0)
+		svc_i3c_master_dequeue_xfer_locked(master, xfer);
+
+	xfer = list_first_entry_or_null(&master->xferqueue.list,
+					struct svc_i3c_xfer,
+					node);
+	if (xfer)
+		list_del_init(&xfer->node);
+
+	master->xferqueue.cur = xfer;
+	svc_i3c_master_start_xfer_locked(master);
+}
+
+static void svc_i3c_master_enqueue_xfer(struct svc_i3c_master *master,
+					struct svc_i3c_xfer *xfer)
+{
+	unsigned long flags;
+
+	init_completion(&xfer->comp);
+	spin_lock_irqsave(&master->xferqueue.lock, flags);
+	if (master->xferqueue.cur) {
+		list_add_tail(&xfer->node, &master->xferqueue.list);
+	} else {
+		master->xferqueue.cur = xfer;
+		svc_i3c_master_start_xfer_locked(master);
+	}
+	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
+}
+
+static bool
+svc_i3c_master_supports_ccc_cmd(struct i3c_master_controller *master,
+				const struct i3c_ccc_cmd *cmd)
+{
+	/* No software support for CCC commands targeting more than one slave */
+	return (cmd->ndests == 1);
+}
+
+static int svc_i3c_master_send_bdcast_ccc_cmd(struct svc_i3c_master *master,
+					      struct i3c_ccc_cmd *ccc)
+{
+	unsigned int xfer_len = ccc->dests[0].payload.len + 1;
+	struct svc_i3c_xfer *xfer;
+	struct svc_i3c_cmd *cmd;
+	u8 *buf;
+	int ret;
+
+	xfer = svc_i3c_master_alloc_xfer(master, 1);
+	if (!xfer)
+		return -ENOMEM;
+
+	buf = kmalloc(xfer_len, GFP_KERNEL);
+	if (!buf) {
+		svc_i3c_master_free_xfer(xfer);
+		return -ENOMEM;
+	}
+
+	buf[0] = ccc->id;
+	memcpy(&buf[1], ccc->dests[0].payload.data, ccc->dests[0].payload.len);
+
+	xfer->type = SVC_I3C_MCTRL_TYPE_I3C;
+
+	cmd = &xfer->cmds[0];
+	cmd->addr = ccc->dests[0].addr;
+	cmd->rnw = ccc->rnw;
+	cmd->in = NULL;
+	cmd->out = buf;
+	cmd->len = xfer_len;
+	cmd->read_len = 0;
+	cmd->continued = false;
+
+	svc_i3c_master_enqueue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		svc_i3c_master_dequeue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	kfree(buf);
+	svc_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static int svc_i3c_master_send_direct_ccc_cmd(struct svc_i3c_master *master,
+					      struct i3c_ccc_cmd *ccc)
+{
+	unsigned int xfer_len = ccc->dests[0].payload.len;
+	unsigned int read_len = ccc->rnw ? xfer_len : 0;
+	struct svc_i3c_xfer *xfer;
+	struct svc_i3c_cmd *cmd;
+	int ret;
+
+	xfer = svc_i3c_master_alloc_xfer(master, 2);
+	if (!xfer)
+		return -ENOMEM;
+
+	xfer->type = SVC_I3C_MCTRL_TYPE_I3C;
+
+	/* Broadcasted message */
+	cmd = &xfer->cmds[0];
+	cmd->addr = I3C_BROADCAST_ADDR;
+	cmd->rnw = 0;
+	cmd->in = NULL;
+	cmd->out = &ccc->id;
+	cmd->len = 1;
+	cmd->read_len = xfer_len;
+	cmd->read_len = 0;
+	cmd->continued = true;
+
+	/* Directed message */
+	cmd = &xfer->cmds[1];
+	cmd->addr = ccc->dests[0].addr;
+	cmd->rnw = ccc->rnw;
+	cmd->in = ccc->rnw ? ccc->dests[0].payload.data : NULL;
+	cmd->out = ccc->rnw ? NULL : ccc->dests[0].payload.data,
+	cmd->len = xfer_len;
+	cmd->read_len = read_len;
+	cmd->continued = false;
+
+	svc_i3c_master_enqueue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		svc_i3c_master_dequeue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	svc_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static int svc_i3c_master_send_ccc_cmd(struct i3c_master_controller *m,
+				       struct i3c_ccc_cmd *cmd)
+{
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	bool broadcast = cmd->id < 0x80;
+
+	if (broadcast)
+		return svc_i3c_master_send_bdcast_ccc_cmd(master, cmd);
+	else
+		return svc_i3c_master_send_direct_ccc_cmd(master, cmd);
+}
+
+static int svc_i3c_master_priv_xfers(struct i3c_dev_desc *dev,
+				     struct i3c_priv_xfer *xfers,
+				     int nxfers)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	struct svc_i3c_xfer *xfer;
+	int ret, i;
+
+	xfer = svc_i3c_master_alloc_xfer(master, nxfers);
+	if (!xfer)
+		return -ENOMEM;
+
+	xfer->type = SVC_I3C_MCTRL_TYPE_I3C;
+
+	for (i = 0; i < nxfers; i++) {
+		struct svc_i3c_cmd *cmd = &xfer->cmds[i];
+
+		cmd->addr = master->addrs[data->index];
+		cmd->rnw = xfers[i].rnw;
+		cmd->in = xfers[i].rnw ? xfers[i].data.in : NULL;
+		cmd->out = xfers[i].rnw ? NULL : xfers[i].data.out;
+		cmd->len = xfers[i].len;
+		cmd->read_len = xfers[i].rnw ? xfers[i].len : 0;
+		cmd->continued = (i + 1) < nxfers;
+	}
+
+	svc_i3c_master_enqueue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		svc_i3c_master_dequeue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	svc_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static int svc_i3c_master_i2c_xfers(struct i2c_dev_desc *dev,
+				    const struct i2c_msg *xfers,
+				    int nxfers)
+{
+	struct i3c_master_controller *m = i2c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev);
+	struct svc_i3c_xfer *xfer;
+	int ret, i;
+
+	xfer = svc_i3c_master_alloc_xfer(master, nxfers);
+	if (!xfer)
+		return -ENOMEM;
+
+	xfer->type = SVC_I3C_MCTRL_TYPE_I2C;
+
+	for (i = 0; i < nxfers; i++) {
+		struct svc_i3c_cmd *cmd = &xfer->cmds[i];
+
+		cmd->addr = master->addrs[data->index];
+		cmd->rnw = xfers[i].flags & I2C_M_RD;
+		cmd->in = cmd->rnw ? xfers[i].buf : NULL;
+		cmd->out = cmd->rnw ? NULL : xfers[i].buf;
+		cmd->len = xfers[i].len;
+		cmd->read_len = cmd->rnw ? xfers[i].len : 0;
+		cmd->continued = (i + 1 < nxfers);
+	}
+
+	svc_i3c_master_enqueue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		svc_i3c_master_dequeue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	svc_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static int svc_i3c_master_request_ibi(struct i3c_dev_desc *dev,
+				      const struct i3c_ibi_setup *req)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	unsigned long flags;
+	unsigned int i;
+
+	data->ibi_pool = i3c_generic_ibi_alloc_pool(dev, req);
+	if (IS_ERR(data->ibi_pool))
+		return PTR_ERR(data->ibi_pool);
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	for (i = 0; i < master->ibi.num_slots; i++) {
+		if (!master->ibi.slots[i]) {
+			data->ibi = i;
+			master->ibi.slots[i] = dev;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	if (i < master->ibi.num_slots)
+		return 0;
+
+	i3c_generic_ibi_free_pool(data->ibi_pool);
+	data->ibi_pool = NULL;
+
+	return -ENOSPC;
+}
+
+static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	master->ibi.slots[data->ibi] = NULL;
+	data->ibi = -1;
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	i3c_generic_ibi_free_pool(data->ibi_pool);
+}
+
+static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	int ret;
+
+	ret = i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
+
+	return ret;
+}
+
+static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
+{
+	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	int ret;
+
+	ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
+
+	return ret;
+}
+
+static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
+					    struct i3c_ibi_slot *slot)
+{
+	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+
+	i3c_generic_ibi_recycle_slot(data->ibi_pool, slot);
+}
+
+static const struct i3c_master_controller_ops svc_i3c_master_ops = {
+	.bus_init = svc_i3c_master_bus_init,
+	.bus_cleanup = svc_i3c_master_bus_cleanup,
+	.attach_i3c_dev = svc_i3c_master_attach_i3c_dev,
+	.detach_i3c_dev = svc_i3c_master_detach_i3c_dev,
+	.reattach_i3c_dev = svc_i3c_master_reattach_i3c_dev,
+	.attach_i2c_dev = svc_i3c_master_attach_i2c_dev,
+	.detach_i2c_dev = svc_i3c_master_detach_i2c_dev,
+	.do_daa = svc_i3c_master_do_daa,
+	.supports_ccc_cmd = svc_i3c_master_supports_ccc_cmd,
+	.send_ccc_cmd = svc_i3c_master_send_ccc_cmd,
+	.priv_xfers = svc_i3c_master_priv_xfers,
+	.i2c_xfers = svc_i3c_master_i2c_xfers,
+	.request_ibi = svc_i3c_master_request_ibi,
+	.free_ibi = svc_i3c_master_free_ibi,
+	.recycle_ibi_slot = svc_i3c_master_recycle_ibi_slot,
+	.enable_ibi = svc_i3c_master_enable_ibi,
+	.disable_ibi = svc_i3c_master_disable_ibi,
+};
+
+static void svc_i3c_master_reset(struct svc_i3c_master *master)
+{
+	u32 reg;
+
+	/* Clear pending warnings */
+	writel(readl(master->regs + SVC_I3C_MERRWARN),
+	       master->regs + SVC_I3C_MERRWARN);
+
+	/* Set RX and TX tigger levels, flush FIFOs */
+	reg = SVC_I3C_MDATACTRL_FLUSHTB |
+	      SVC_I3C_MDATACTRL_FLUSHRB |
+	      SVC_I3C_MDATACTRL_UNLOCK_TRIG |
+	      SVC_I3C_MDATACTRL_TXTRIG_FIFO_NOT_FULL |
+	      SVC_I3C_MDATACTRL_RXTRIG_FIFO_NOT_EMPTY;
+	writel(reg, master->regs + SVC_I3C_MDATACTRL);
+
+	svc_i3c_master_disable_interrupts(master);
+}
+
+static int svc_i3c_master_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct svc_i3c_master *master;
+	int ret;
+
+	master = devm_kzalloc(dev, sizeof(*master), GFP_KERNEL);
+	if (!master)
+		return -ENOMEM;
+
+	master->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(master->regs))
+		return PTR_ERR(master->regs);
+
+	master->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(master->pclk))
+		return PTR_ERR(master->pclk);
+
+	master->fclk = devm_clk_get(dev, "fast_clk");
+	if (IS_ERR(master->fclk))
+		return PTR_ERR(master->fclk);
+
+	master->sclk = devm_clk_get(dev, "slow_clk");
+	if (IS_ERR(master->sclk))
+		return PTR_ERR(master->sclk);
+
+	master->irq = platform_get_irq(pdev, 0);
+	if (master->irq <= 0)
+		return -ENOENT;
+
+	master->dev = dev;
+
+	svc_i3c_master_reset(master);
+
+	ret = clk_prepare_enable(master->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(master->fclk);
+	if (ret)
+		goto err_disable_pclk;
+
+	ret = clk_prepare_enable(master->sclk);
+	if (ret)
+		goto err_disable_fclk;
+
+	INIT_WORK(&master->hj_work, svc_i3c_master_hj);
+	ret = request_threaded_irq(master->irq, svc_i3c_master_irq_handler,
+				   svc_i3c_master_threaded_handler,
+				   IRQF_NO_SUSPEND, "svc-i3c-irq", master);
+	if (ret)
+		goto err_disable_sclk;
+
+	master->free_slots = GENMASK(SVC_I3C_MAX_DEVS - 1, 0);
+
+	spin_lock_init(&master->xferqueue.lock);
+	INIT_LIST_HEAD(&master->xferqueue.list);
+
+	spin_lock_init(&master->ibi.lock);
+	master->ibi.num_slots = SVC_I3C_MAX_DEVS;
+	master->ibi.slots = devm_kcalloc(&pdev->dev, master->ibi.num_slots,
+					 sizeof(*master->ibi.slots),
+					 GFP_KERNEL);
+	if (!master->ibi.slots) {
+		ret = -ENOMEM;
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, master);
+
+	/* Register the master */
+	ret = i3c_master_register(&master->base, &pdev->dev,
+				  &svc_i3c_master_ops, false);
+	if (ret)
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	free_irq(master->irq, master);
+
+err_disable_sclk:
+	clk_disable_unprepare(master->sclk);
+
+err_disable_fclk:
+	clk_disable_unprepare(master->fclk);
+
+err_disable_pclk:
+	clk_disable_unprepare(master->pclk);
+
+	return ret;
+}
+
+static int svc_i3c_master_remove(struct platform_device *pdev)
+{
+	struct svc_i3c_master *master = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = i3c_master_unregister(&master->base);
+	if (ret)
+		return ret;
+
+	free_irq(master->irq, master);
+	clk_disable_unprepare(master->pclk);
+	clk_disable_unprepare(master->fclk);
+	clk_disable_unprepare(master->sclk);
+
+	return 0;
+}
+
+static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
+	{ .compatible = "silvaco,i3c-master" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver svc_i3c_master = {
+	.probe = svc_i3c_master_probe,
+	.remove = svc_i3c_master_remove,
+	.driver = {
+		.name = "silvaco-i3c-master",
+		.of_match_table = svc_i3c_master_of_match_tbl,
+	},
+};
+module_platform_driver(svc_i3c_master);
+
+MODULE_AUTHOR("Conor Culhane <conor.culhane@silvaco.com>");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Silvaco dual-role I3C master driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master
  2020-08-12 14:13 [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Miquel Raynal
  2020-08-12 14:13 ` [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding Miquel Raynal
  2020-08-12 14:13 ` [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver Miquel Raynal
@ 2020-08-12 14:13 ` Miquel Raynal
  2020-08-12 15:07   ` Miquel Raynal
  2020-08-24 23:21 ` [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Rob Herring
  3 siblings, 1 reply; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 14:13 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Thomas Petazzoni, Miquel Raynal, Conor Culhane

Add Conor and myself as maintainers.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---

Changes in v2:
* None.

 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e627ed60d75a..fedd10537723 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15764,6 +15764,14 @@ S:	Maintained
 F:	Documentation/fb/sm712fb.rst
 F:	drivers/video/fbdev/sm712*
 
+SILVACO I3C DUAL-ROLE MASTER
+M:	Miquel Raynal <miquel.raynal@bootlin.com>
+M:	Conor Culhane <conor.culhane@silvaco.com>
+L:	linux-i3c@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/i3c/svc,i3c-master.yaml
+F:	drivers/i3c/master/svc-i3c-master.c
+
 SIMPLE FIRMWARE INTERFACE (SFI)
 S:	Obsolete
 W:	http://simplefirmware.org/
-- 
2.20.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master
  2020-08-12 14:13 ` [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master Miquel Raynal
@ 2020-08-12 15:07   ` Miquel Raynal
  0 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 15:07 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Thomas Petazzoni, Rajeev Huralikoppi, linux-kernel,
	Conor Culhane, Nicolas Pitre

Hello,

Miquel Raynal <miquel.raynal@bootlin.com> wrote on Wed, 12 Aug 2020
16:13:12 +0200:

> Add Conor and myself as maintainers.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> 
> Changes in v2:
> * None.
> 
>  MAINTAINERS | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e627ed60d75a..fedd10537723 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15764,6 +15764,14 @@ S:	Maintained
>  F:	Documentation/fb/sm712fb.rst
>  F:	drivers/video/fbdev/sm712*
>  
> +SILVACO I3C DUAL-ROLE MASTER
> +M:	Miquel Raynal <miquel.raynal@bootlin.com>
> +M:	Conor Culhane <conor.culhane@silvaco.com>
> +L:	linux-i3c@lists.infradead.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/i3c/svc,i3c-master.yaml

Should be silvaco,i3c-master.yaml...

I'll correct in v3.

Thanks,
Miquèl

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver
  2020-08-12 14:13 ` [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver Miquel Raynal
@ 2020-08-12 15:18   ` Miquel Raynal
  2020-08-19  9:04   ` Boris Brezillon
  1 sibling, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2020-08-12 15:18 UTC (permalink / raw)
  To: Boris Brezillon, linux-i3c, Rob Herring, devicetree
  Cc: Thomas Petazzoni, Rajeev Huralikoppi, linux-kernel,
	Conor Culhane, Nicolas Pitre

Hi Conor, Rajeev,

> +static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
> +				     struct i3c_dev_desc *dev)
> +{
> +	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
> +	struct i3c_ibi_slot *slot;
> +	unsigned int count;
> +	u32 mdatactrl;
> +	int ret = 0;
> +	u8 *buf;
> +
> +	spin_lock(&master->ibi.lock);
> +
> +	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
> +	if (!slot) {
> +		ret = -ENOSPC;
> +		goto unlock;
> +	}
> +
> +	slot->len = 0;
> +	buf = slot->data;
> +	while (readl(master->regs + SVC_I3C_MSTATUS) & SVC_I3C_MINT_RXPEND) {
> +		mdatactrl = readl(master->regs + SVC_I3C_MDATACTRL);
> +		count = SVC_I3C_MDATACTRL_RXCOUNT(mdatactrl);
> +		readsl(master->regs + SVC_I3C_MRDATAB, buf, count);

After discussing with Boris, I have a question about the design: is
there a way to differentiate, from a software point of view, from the
data coming as "IBI" and "regular data"?

Let's say the master initiates a read.
The moment after, an IBI is triggered.
The hanlde_ibi() helper is called to read the IBI payload.
While the IBI interrupted the read operation, it also interrupted the
master dequeuing process of the bytes already in the FIFO. From a
software perspective, we might end up reading a "regular byte" from the
handle_ibi() helper expecting an "IBI byte".

Is there some kind of double queue feature which I missed? Or perhaps a
way to discriminate the origin of the data?

> +		slot->len += count;
> +		buf += count;
> +	}
> +
> +	i3c_master_queue_ibi(dev, slot);
> +
> +unlock:
> +	spin_unlock(&master->ibi.lock);
> +	svc_i3c_master_emit_stop(master);
> +	svc_i3c_master_flush_fifo(master);
> +
> +	return ret;
> +}
> +
> +static void svc_i3c_master_ack_ibi(struct svc_i3c_master *master,
> +				   bool mandatory_byte)
> +{
> +	unsigned int ibi_ack_nack;
> +
> +	ibi_ack_nack = SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK;
> +	if (mandatory_byte)
> +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITH_BYTE;
> +	else
> +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITHOUT_BYTE;
> +
> +	writel(ibi_ack_nack, master->regs + SVC_I3C_MCTRL);
> +}
> +
> +static void svc_i3c_master_nack_ibi(struct svc_i3c_master *master)
> +{
> +	writel(SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK |
> +	       SVC_I3C_MCTRL_IBIRESP_NACK,
> +	       master->regs + SVC_I3C_MCTRL);
> +}
> +
> +static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id)
> +{
> +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> +	u32 active = readl(master->regs + SVC_I3C_MINTMASKED);
> +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> +	unsigned int ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
> +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> +	struct i3c_dev_desc *dev;
> +	bool rdata;
> +
> +	if (active & SVC_I3C_MINT_SLVSTART) {
> +		writel(SVC_I3C_MINT_SLVSTART, master->regs + SVC_I3C_MSTATUS);
> +		writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
> +		       SVC_I3C_MCTRL_IBIRESP_MANUAL,
> +		       master->regs + SVC_I3C_MCTRL);
> +		return IRQ_HANDLED;
> +	}
> +
> +	if (!(active & SVC_I3C_MINT_IBIWON))
> +		return IRQ_NONE;
> +
> +	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
> +
> +	switch (ibitype) {
> +	case SVC_I3C_MSTATUS_IBITYPE_IBI:
> +		dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> +		if (WARN_ON(!dev)) {
> +			svc_i3c_master_nack_ibi(master);
> +			break;
> +		}
> +
> +		rdata = dev->info.bcr & I3C_BCR_IBI_PAYLOAD;
> +		svc_i3c_master_ack_ibi(master, rdata);
> +		if (rdata) {
> +			svc_i3c_master_disable_interrupts(master);
> +			return IRQ_WAKE_THREAD;
> +		}
> +
> +		break;
> +	case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST:
> +		svc_i3c_master_nack_ibi(master);
> +		break;
> +	case SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN:
> +		svc_i3c_master_ack_ibi(master, false);
> +		queue_work(master->base.wq, &master->hj_work);
> +		break;
> +	default:
> +		return IRQ_NONE;
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t svc_i3c_master_threaded_handler(int irq, void *dev_id)
> +{
> +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> +	struct i3c_dev_desc *dev;
> +
> +	dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> +	if (WARN_ON(!dev)) {
> +		svc_i3c_master_emit_stop(master);
> +		svc_i3c_master_flush_fifo(master);
> +		return IRQ_HANDLED;
> +	}
> +
> +	svc_i3c_master_handle_ibi(master, dev);
> +	svc_i3c_master_enable_interrupts(master,
> +					 SVC_I3C_MINT_SLVSTART |
> +					 SVC_I3C_MINT_IBIWON);
> +
> +	return IRQ_HANDLED;
> +}

Thanks,
Miquèl

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver
  2020-08-12 14:13 ` [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver Miquel Raynal
  2020-08-12 15:18   ` Miquel Raynal
@ 2020-08-19  9:04   ` Boris Brezillon
  2020-12-28 16:04     ` Miquel Raynal
  1 sibling, 1 reply; 10+ messages in thread
From: Boris Brezillon @ 2020-08-19  9:04 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: devicetree, Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Rob Herring, Thomas Petazzoni, linux-i3c, Conor Culhane

On Wed, 12 Aug 2020 16:13:11 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:


> +
> +#define SVC_I3C_MAX_DEVS 32
> +
> +struct svc_i3c_cmd {
> +	u8 addr;
> +	bool rnw;
> +	u8 *in;
> +	const void *out;
> +	unsigned int len;
> +	unsigned int read_len;
> +	bool continued;
> +};
> +
> +struct svc_i3c_xfer {
> +	struct list_head node;
> +	struct completion comp;
> +	int ret;
> +	unsigned int type;
> +	unsigned int ncmds;
> +	struct svc_i3c_cmd cmds[];
> +};
> +
> +/**
> + * struct svc_i3c_master - Silvaco I3C Master structure
> + * @base: I3C master controller
> + * @dev: Corresponding device
> + * @regs: Memory mapping
> + * @free_slots: Bit array of available slots
> + * @addrs: Array containing the dynamic addresses of each attached device
> + * @descs: Array of descriptors, one per attached device
> + * @hj_work: Hot-join work
> + * @irq: Main interrupt
> + * @pclk: System clock
> + * @fclk: Fast clock (bus)
> + * @sclk: Slow clock (other events)
> + * @xferqueue: Transfer queue structure
> + * @xferqueue.list: List member
> + * @xferqueue.cur: Current ongoing transfer
> + * @xferqueue.lock: Queue lock
> + * @ibi: IBI structure
> + * @ibi.num_slots: Number of slots available in @ibi.slots
> + * @ibi.slots: Available IBI slots
> + * @ibi.lock: IBI lock
> + * @bus_lock: Bus lock
> + */
> +struct svc_i3c_master {
> +	struct i3c_master_controller base;
> +	struct device *dev;
> +	void __iomem *regs;
> +	u32 free_slots;
> +	u8 addrs[SVC_I3C_MAX_DEVS];
> +	struct i3c_dev_desc *descs[SVC_I3C_MAX_DEVS];
> +	struct work_struct hj_work;
> +	int irq;
> +	struct clk *pclk;
> +	struct clk *fclk;
> +	struct clk *sclk;
> +	struct {
> +		struct list_head list;
> +		struct svc_i3c_xfer *cur;
> +		/* Prevent races between transfers */
> +		spinlock_t lock;
> +	} xferqueue;
> +	struct {
> +		unsigned int num_slots;
> +		struct i3c_dev_desc **slots;
> +		/* Prevent races within IBI handlers */
> +		spinlock_t lock;
> +	} ibi;
> +};
> +
> +/**
> + * struct svc_i3c_i3c_dev_data - Device specific data
> + * @index: Index in the master tables corresponding to this device
> + * @ibi: IBI slot index in the master structure
> + * @ibi_pool: IBI pool associated to this device
> + */
> +struct svc_i3c_i2c_dev_data {
> +	u8 index;
> +	int ibi;
> +	struct i3c_generic_ibi_pool *ibi_pool;
> +};
> +
> +static void svc_i3c_master_enable_interrupts(struct svc_i3c_master *master, u32 mask)
> +{
> +	writel(mask, master->regs + SVC_I3C_MINTSET);
> +}
> +
> +static void svc_i3c_master_disable_interrupts(struct svc_i3c_master *master)
> +{
> +	u32 mask = readl(master->regs + SVC_I3C_MINTSET);
> +
> +	writel(mask, master->regs + SVC_I3C_MINTCLR);
> +}
> +
> +static inline struct svc_i3c_master *
> +to_svc_i3c_master(struct i3c_master_controller *master)
> +{
> +	return container_of(master, struct svc_i3c_master, base);
> +}
> +
> +static void svc_i3c_master_hj(struct work_struct *work)
> +{
> +	struct svc_i3c_master *master;
> +
> +	master = container_of(work, struct svc_i3c_master, hj_work);
> +	i3c_master_do_daa(&master->base);
> +}
> +
> +static void svc_i3c_master_flush_fifo(struct svc_i3c_master *master)
> +{
> +	writel(SVC_I3C_MDATACTRL_FLUSHTB | SVC_I3C_MDATACTRL_FLUSHRB,
> +	       master->regs + SVC_I3C_MDATACTRL);
> +}
> +
> +static struct i3c_dev_desc *
> +svc_i3c_master_dev_from_addr(struct svc_i3c_master *master,
> +			     unsigned int ibiaddr)
> +{
> +	int i;
> +
> +	for (i = 0; i < SVC_I3C_MAX_DEVS; i++)
> +		if (master->addrs[i] == ibiaddr)
> +			break;
> +
> +	if (i == SVC_I3C_MAX_DEVS)
> +		return NULL;
> +
> +	return master->descs[i];
> +}
> +
> +static void svc_i3c_master_emit_stop(struct svc_i3c_master *master)
> +{
> +	writel(SVC_I3C_MCTRL_REQUEST_STOP, master->regs + SVC_I3C_MCTRL);
> +}
> +
> +static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
> +				     struct i3c_dev_desc *dev)
> +{
> +	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
> +	struct i3c_ibi_slot *slot;
> +	unsigned int count;
> +	u32 mdatactrl;
> +	int ret = 0;
> +	u8 *buf;
> +
> +	spin_lock(&master->ibi.lock);
> +
> +	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
> +	if (!slot) {
> +		ret = -ENOSPC;
> +		goto unlock;
> +	}
> +
> +	slot->len = 0;
> +	buf = slot->data;
> +	while (readl(master->regs + SVC_I3C_MSTATUS) & SVC_I3C_MINT_RXPEND) {
> +		mdatactrl = readl(master->regs + SVC_I3C_MDATACTRL);
> +		count = SVC_I3C_MDATACTRL_RXCOUNT(mdatactrl);
> +		readsl(master->regs + SVC_I3C_MRDATAB, buf, count);
> +		slot->len += count;
> +		buf += count;
> +	}

I don't think the while loop and i3c_generic_ibi_get_free_slot() call
have to be protected by the ibi lock (having an unbounded while loop in
a critical section makes me nervous).

We also discussed the race you have because IBIs and regular transfers
share the same RX FIFO, which you mentioned in your previous reply
already.

> +
> +	i3c_master_queue_ibi(dev, slot);
> +
> +unlock:
> +	spin_unlock(&master->ibi.lock);
> +	svc_i3c_master_emit_stop(master);
> +	svc_i3c_master_flush_fifo(master);

Flush FIFOs? Does it flush all remaining bytes present in the RX/TX
FIFOs? Are you sure that's appropriate?

> +
> +	return ret;
> +}
> +
> +static void svc_i3c_master_ack_ibi(struct svc_i3c_master *master,
> +				   bool mandatory_byte)
> +{
> +	unsigned int ibi_ack_nack;
> +
> +	ibi_ack_nack = SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK;
> +	if (mandatory_byte)
> +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITH_BYTE;


IIRC, some devices send more than one byte, does that mean you don't
support those?

> +	else
> +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITHOUT_BYTE;
> +
> +	writel(ibi_ack_nack, master->regs + SVC_I3C_MCTRL);
> +}
> +
> +static void svc_i3c_master_nack_ibi(struct svc_i3c_master *master)
> +{
> +	writel(SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK |
> +	       SVC_I3C_MCTRL_IBIRESP_NACK,
> +	       master->regs + SVC_I3C_MCTRL);
> +}
> +
> +static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id)
> +{
> +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> +	u32 active = readl(master->regs + SVC_I3C_MINTMASKED);
> +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> +	unsigned int ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
> +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> +	struct i3c_dev_desc *dev;
> +	bool rdata;
> +
> +	if (active & SVC_I3C_MINT_SLVSTART) {
> +		writel(SVC_I3C_MINT_SLVSTART, master->regs + SVC_I3C_MSTATUS);
> +		writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
> +		       SVC_I3C_MCTRL_IBIRESP_MANUAL,
> +		       master->regs + SVC_I3C_MCTRL);

I would expect some kind of auto-ack/nack mechanism. Not sure what
happens when you do it manually, but if that blocks the bus waiting for
the interrupt handler to tell the I3C master what to do with IBI,
that's far from ideal.

> +		return IRQ_HANDLED;
> +	}
> +
> +	if (!(active & SVC_I3C_MINT_IBIWON))
> +		return IRQ_NONE;
> +
> +	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
> +
> +	switch (ibitype) {
> +	case SVC_I3C_MSTATUS_IBITYPE_IBI:
> +		dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> +		if (WARN_ON(!dev)) {

I wouldn't WARN_ON() that. I wouldn't be surprised if some slaves send
IBIs without being allowed, and you're in an interrupt context. This
being said, you should probably trigger a DISEC on this device when
that happens.

> +			svc_i3c_master_nack_ibi(master);
> +			break;
> +		}
> +
> +		rdata = dev->info.bcr & I3C_BCR_IBI_PAYLOAD;
> +		svc_i3c_master_ack_ibi(master, rdata);
> +		if (rdata) {
> +			svc_i3c_master_disable_interrupts(master);
> +			return IRQ_WAKE_THREAD;
> +		}
> +
> +		break;
> +	case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST:
> +		svc_i3c_master_nack_ibi(master);
> +		break;
> +	case SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN:
> +		svc_i3c_master_ack_ibi(master, false);
> +		queue_work(master->base.wq, &master->hj_work);
> +		break;
> +	default:
> +		return IRQ_NONE;
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t svc_i3c_master_threaded_handler(int irq, void *dev_id)
> +{
> +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> +	struct i3c_dev_desc *dev;

Do you really need a threaded irq? We already have a workqueue per
master, maybe you can use it to schedule the IBI dequeuing?

> +
> +	dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> +	if (WARN_ON(!dev)) {
> +		svc_i3c_master_emit_stop(master);
> +		svc_i3c_master_flush_fifo(master);
> +		return IRQ_HANDLED;
> +	}
> +
> +	svc_i3c_master_handle_ibi(master, dev);
> +	svc_i3c_master_enable_interrupts(master,
> +					 SVC_I3C_MINT_SLVSTART |
> +					 SVC_I3C_MINT_IBIWON);
> +
> +	return IRQ_HANDLED;
> +}
> +


> +
> +static int svc_i3c_master_attach_i3c_dev(struct i3c_dev_desc *dev)
> +{
> +	struct i3c_master_controller *m = i3c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	struct svc_i3c_i2c_dev_data *data;
> +	int slot;
> +
> +	slot = svc_i3c_master_reserve_slot(master);
> +	if (slot < 0)
> +		return slot;
> +
> +	data = kzalloc(sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		svc_i3c_master_release_slot(master, slot);
> +		return -ENOMEM;
> +	}
> +
> +	data->ibi = -1;
> +	data->index = slot;
> +	master->addrs[slot] = dev->info.dyn_addr ? dev->info.dyn_addr :
> +						   dev->info.static_addr;
> +	master->descs[slot] = dev;
> +
> +	i3c_dev_set_master_data(dev, data);
> +
> +	return 0;
> +}
> +
> +static int svc_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
> +					   u8 old_dyn_addr)
> +{
> +	struct i3c_master_controller *m = i3c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
> +
> +	master->addrs[data->index] = dev->info.dyn_addr ? dev->info.dyn_addr :
> +							  dev->info.static_addr;
> +
> +	return 0;
> +}
> +
> +static void svc_i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev)
> +{
> +	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
> +	struct i3c_master_controller *m = i3c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +
> +	svc_i3c_master_release_slot(master, data->index);
> +
> +	kfree(data);
> +}
> +
> +static int svc_i3c_master_attach_i2c_dev(struct i2c_dev_desc *dev)
> +{
> +	struct i3c_master_controller *m = i2c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +	struct svc_i3c_i2c_dev_data *data;
> +	int slot;
> +
> +	slot = svc_i3c_master_reserve_slot(master);
> +	if (slot < 0)
> +		return slot;
> +
> +	data = kzalloc(sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		svc_i3c_master_release_slot(master, slot);
> +		return -ENOMEM;
> +	}
> +
> +	data->index = slot;
> +	master->addrs[slot] = dev->addr;
> +
> +	i2c_dev_set_master_data(dev, data);
> +
> +	return 0;
> +}
> +
> +static void svc_i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
> +{
> +	struct svc_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev);
> +	struct i3c_master_controller *m = i2c_dev_get_master(dev);
> +	struct svc_i3c_master *master = to_svc_i3c_master(m);
> +
> +	svc_i3c_master_release_slot(master, data->index);
> +
> +	kfree(data);
> +}
> +
> +static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
> +					u8 *addrs, unsigned int *count)
> +{
> +	u64 prov_id[SVC_I3C_MAX_DEVS] = {}, nacking_prov_id = 0;
> +	unsigned int dev_nb = 0, last_addr = 0;
> +	u32 reg;
> +	int ret, i;
> +
> +	while (true) {
> +		/* Enter/proceed with DAA */
> +		writel(SVC_I3C_MCTRL_REQUEST_PROC_DAA |
> +		       SVC_I3C_MCTRL_TYPE_I3C |
> +		       SVC_I3C_MCTRL_IBIRESP_MANUAL |
> +		       SVC_I3C_MCTRL_DIR(SVC_I3C_MCTRL_DIR_WRITE),
> +		       master->regs + SVC_I3C_MCTRL);
> +
> +		/*
> +		 * Either one slave will send its ID, or the assignment process
> +		 * is done.
> +		 */
> +		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> +					 reg & (SVC_I3C_MINT_RXPEND |
> +						SVC_I3C_MINT_MCTRLDONE),
> +					 1, 1000);

No interrupt for the DAA? I'm also curious about the RX FIFO size.
Looks like PIDs/BCRs/DCRs of attached devices go there. What happens if
it exceeds the size of the FIFO and you're not dequeuing things fast
enough?

> +		if (ret)
> +			return ret;
> +
> +		if (reg & SVC_I3C_MINT_RXPEND) {
> +			u8 datab;
> +
> +			/*
> +			 * We only care about the 48-bit provisional ID yet to
> +			 * be sure a device does not nack an address twice.
> +			 * Otherwise, we would just need to flush the RX FIFO.
> +			 */
> +			for (i = 0; i < 6; i++) {
> +				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
> +							 reg,
> +							 reg & SVC_I3C_MINT_RXPEND,
> +							 0, 1000);
> +				if (ret)
> +					return ret;
> +
> +				datab = readl(master->regs + SVC_I3C_MRDATAB);
> +				prov_id[dev_nb] |= (u64)(datab) << (8 * (5 - i));

This calls for an svc_i3c_read_bytes() helper.

> +			}
> +
> +			/* We do not care about the BCR and DCR yet */
> +			for (i = 0; i < 2; i++) {
> +				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
> +							 reg,
> +							 reg & SVC_I3C_MINT_RXPEND,
> +							 0, 1000);
> +				if (ret)
> +					return ret;
> +
> +				reg = readl(master->regs + SVC_I3C_MRDATAB);
> +			}
> +		} else if (SVC_I3C_MSTATUS_MCTRLDONE(reg)) {

Can't you have both SVC_I3C_MSTATUS_MCTRLDONE and SVC_I3C_MINT_RXPEND?
BTW, can we make the bit definitions consistent. You sometimes have:

#define FOO(x)	FIELD_GET(BIT(n), (x))

and sometimes

#define BAR	BIT(n)

which leads to inconsistencies in how you test presence of those bits:

'if (FOO(reg))' vs 'if (reg & BAR)'.

> +			if (SVC_I3C_MSTATUS_STATE_IDLE(reg) &&
> +			    SVC_I3C_MSTATUS_COMPLETE(reg)) {
> +				/*
> +				 * All devices received and acked they dynamic
> +				 * address, this is the natural end of the DAA
> +				 * procedure.
> +				 */
> +				break;
> +			} else if (SVC_I3C_MSTATUS_NACKED(reg)) {
> +				/*
> +				 * A slave device nacked the address, this is
> +				 * allowed only once, DAA will be stopped and
> +				 * then resumed. The same device is supposed to
> +				 * answer again immediately and shall ack the
> +				 * address this time.
> +				 */


I couldn't find where this is described in v1 of the spec. All I see is:

"
The Arbitration-winning Device shall acknowledge the assigned Dynamic
Address
"

> +				if (prov_id[dev_nb] == nacking_prov_id)
> +					return -EIO;
> +
> +				dev_nb--;
> +				nacking_prov_id = prov_id[dev_nb];
> +				svc_i3c_master_emit_stop(master);
> +
> +				continue;
> +			} else {
> +				return -EIO;
> +			}
> +		}
> +
> +		/* Wait for the slave to be ready to receive its address */
> +		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> +					 SVC_I3C_MSTATUS_MCTRLDONE(reg) &&
> +					 SVC_I3C_MSTATUS_STATE_DAA(reg) &&
> +					 SVC_I3C_MSTATUS_BETWEEN(reg),
> +					 0, 1000);
> +		if (ret)
> +			return ret;
> +
> +		/* Give the slave device a suitable dynamic address */
> +		ret = i3c_master_get_free_addr(&master->base, last_addr + 1);
> +		if (ret < 0)
> +			return ret;
> +
> +		addrs[dev_nb] = ret;
> +
> +		writel(addrs[dev_nb], master->regs + SVC_I3C_MWDATAB);
> +		last_addr = addrs[dev_nb++];
> +	}
> +
> +	*count = dev_nb;
> +
> +	return 0;
> +}

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco
  2020-08-12 14:13 [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Miquel Raynal
                   ` (2 preceding siblings ...)
  2020-08-12 14:13 ` [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master Miquel Raynal
@ 2020-08-24 23:21 ` Rob Herring
  3 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-08-24 23:21 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: devicetree, Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Rob Herring, Thomas Petazzoni, Boris Brezillon, linux-i3c,
	Conor Culhane

On Wed, 12 Aug 2020 16:13:09 +0200, Miquel Raynal wrote:
> Silvaco, Inc. is an EDA provider of software tools used for process
> and device development and for analog/mixed-signal, power IC and
> memory design [1].
> 
> [1] https://www.silvaco.com/company/profile/profile.html
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> 
> Changes in v2:
> * Change the prefix 'svc,' -> 'silvaco,'.
> 
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding
  2020-08-12 14:13 ` [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding Miquel Raynal
@ 2020-08-24 23:24   ` Rob Herring
  0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-08-24 23:24 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: devicetree, Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Boris Brezillon, Thomas Petazzoni, linux-i3c, Conor Culhane

On Wed, Aug 12, 2020 at 04:13:10PM +0200, Miquel Raynal wrote:
> Silvaco provide a dual-role I3C master.
> 
> Description is rather simple: it needs a register mapping, three
> clocks and an interrupt.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> 
> Changes in v2:
> * Updated Rob's tool and fixed the mistake reported.
> * Updated the vendor prefix.
> 
>  .../bindings/i3c/silvaco,i3c-master.yaml      | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
> new file mode 100644
> index 000000000000..63731e8a9068
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/silvaco,i3c-master.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Silvaco I3C master
> +
> +maintainers:
> +  - Conor Culhane <conor.culhane@silvaco.com>
> +
> +properties:
> +  compatible:
> +    const: silvaco,i3c-master
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clock-names:
> +    description: |
> +      There are three clocks:
> +        pclk:     System clock
> +        fast_clk: Fast clock (for the bus)
> +        slow_clk: Slow clock (for other events)

You basically say this in the schema... If you want some description, do 
it in 'clocks':

clocks:
  items:
    - description: ...
    - description: ...
    - description: ...

> +
> +    items:
> +      - const: pclk
> +      - const: fast_clk
> +      - const: slow_clk
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 3
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clock-names
> +  - clocks

additionalProperties: false

And that will point out some errors in the example.

> +
> +examples:
> +  - |
> +    i3c-master@a0000000 {
> +        compatible = "silvaco,i3c-master";
> +        clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
> +        clock-names = "pclk", "fast_clk", "slow_clk";
> +        interrupt-parent = <&gic>;
> +        interrupts = <0 89 4>;
> +        reg = <0xa0000000 0x1000>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +    };
> -- 
> 2.20.1
> 

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver
  2020-08-19  9:04   ` Boris Brezillon
@ 2020-12-28 16:04     ` Miquel Raynal
  0 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2020-12-28 16:04 UTC (permalink / raw)
  To: Boris Brezillon, Alexandre Belloni
  Cc: devicetree, Rajeev Huralikoppi, Nicolas Pitre, linux-kernel,
	Rob Herring, Thomas Petazzoni, linux-i3c, Conor Culhane

Hi Boris,

It's been quite some time since you made this review, but now that I am
ready to send a new version, I think it is useful to answer your
questions and remarks below which I pretty much all addressed with
significant changes.

Also adding Alexandre so he can smoothly get into this driver :)

> > +static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
> > +				     struct i3c_dev_desc *dev)
> > +{
> > +	struct svc_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
> > +	struct i3c_ibi_slot *slot;
> > +	unsigned int count;
> > +	u32 mdatactrl;
> > +	int ret = 0;
> > +	u8 *buf;
> > +
> > +	spin_lock(&master->ibi.lock);
> > +
> > +	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
> > +	if (!slot) {
> > +		ret = -ENOSPC;
> > +		goto unlock;
> > +	}
> > +
> > +	slot->len = 0;
> > +	buf = slot->data;
> > +	while (readl(master->regs + SVC_I3C_MSTATUS) & SVC_I3C_MINT_RXPEND) {
> > +		mdatactrl = readl(master->regs + SVC_I3C_MDATACTRL);
> > +		count = SVC_I3C_MDATACTRL_RXCOUNT(mdatactrl);
> > +		readsl(master->regs + SVC_I3C_MRDATAB, buf, count);
> > +		slot->len += count;
> > +		buf += count;
> > +	}  
> 
> I don't think the while loop and i3c_generic_ibi_get_free_slot() call
> have to be protected by the ibi lock (having an unbounded while loop in
> a critical section makes me nervous).

Dropped indeed, I don't think it is needed as well.

> We also discussed the race you have because IBIs and regular transfers
> share the same RX FIFO, which you mentioned in your previous reply
> already.

I addressed this issue by automatically nacking IBIs happening during
transfers (hardware feature).

> > +
> > +	i3c_master_queue_ibi(dev, slot);
> > +
> > +unlock:
> > +	spin_unlock(&master->ibi.lock);
> > +	svc_i3c_master_emit_stop(master);
> > +	svc_i3c_master_flush_fifo(master);  
> 
> Flush FIFOs? Does it flush all remaining bytes present in the RX/TX
> FIFOs? Are you sure that's appropriate?

Indeed this is not appropriate and has been dropped.

> > +
> > +	return ret;
> > +}
> > +
> > +static void svc_i3c_master_ack_ibi(struct svc_i3c_master *master,
> > +				   bool mandatory_byte)
> > +{
> > +	unsigned int ibi_ack_nack;
> > +
> > +	ibi_ack_nack = SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK;
> > +	if (mandatory_byte)
> > +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITH_BYTE;  
> 
> 
> IIRC, some devices send more than one byte, does that mean you don't
> support those?

The dequeuing mechanism is able to read up to 16 bytes (FIFO size), it
should not be a problem.

> > +	else
> > +		ibi_ack_nack |= SVC_I3C_MCTRL_IBIRESP_ACK_WITHOUT_BYTE;
> > +
> > +	writel(ibi_ack_nack, master->regs + SVC_I3C_MCTRL);
> > +}
> > +
> > +static void svc_i3c_master_nack_ibi(struct svc_i3c_master *master)
> > +{
> > +	writel(SVC_I3C_MCTRL_REQUEST_IBI_ACKNACK |
> > +	       SVC_I3C_MCTRL_IBIRESP_NACK,
> > +	       master->regs + SVC_I3C_MCTRL);
> > +}
> > +
> > +static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id)
> > +{
> > +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> > +	u32 active = readl(master->regs + SVC_I3C_MINTMASKED);
> > +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> > +	unsigned int ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
> > +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> > +	struct i3c_dev_desc *dev;
> > +	bool rdata;
> > +
> > +	if (active & SVC_I3C_MINT_SLVSTART) {
> > +		writel(SVC_I3C_MINT_SLVSTART, master->regs + SVC_I3C_MSTATUS);
> > +		writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
> > +		       SVC_I3C_MCTRL_IBIRESP_MANUAL,
> > +		       master->regs + SVC_I3C_MCTRL);  
> 
> I would expect some kind of auto-ack/nack mechanism. Not sure what
> happens when you do it manually, but if that blocks the bus waiting for
> the interrupt handler to tell the I3C master what to do with IBI,
> that's far from ideal.

After discussing with people who designed the IP, they told me that
the time between SDA being pulled low to interrupt the master and the
master responding is unbounded. What is critical is the handling of
the interrupt once the master authorized the interrupt. I entirely
reworked the IRQ handling for that in v3.

> > +		return IRQ_HANDLED;
> > +	}
> > +
> > +	if (!(active & SVC_I3C_MINT_IBIWON))
> > +		return IRQ_NONE;
> > +
> > +	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
> > +
> > +	switch (ibitype) {
> > +	case SVC_I3C_MSTATUS_IBITYPE_IBI:
> > +		dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> > +		if (WARN_ON(!dev)) {  
> 
> I wouldn't WARN_ON() that. I wouldn't be surprised if some slaves send
> IBIs without being allowed, and you're in an interrupt context. This
> being said, you should probably trigger a DISEC on this device when
> that happens.

I dropped the warning, however the point of warning here is that I
cannot identify the device, hence I cannot disable the event calls
coming from this device :)

> > +			svc_i3c_master_nack_ibi(master);
> > +			break;
> > +		}
> > +
> > +		rdata = dev->info.bcr & I3C_BCR_IBI_PAYLOAD;
> > +		svc_i3c_master_ack_ibi(master, rdata);
> > +		if (rdata) {
> > +			svc_i3c_master_disable_interrupts(master);
> > +			return IRQ_WAKE_THREAD;
> > +		}
> > +
> > +		break;
> > +	case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST:
> > +		svc_i3c_master_nack_ibi(master);
> > +		break;
> > +	case SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN:
> > +		svc_i3c_master_ack_ibi(master, false);
> > +		queue_work(master->base.wq, &master->hj_work);
> > +		break;
> > +	default:
> > +		return IRQ_NONE;
> > +	}
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t svc_i3c_master_threaded_handler(int irq, void *dev_id)
> > +{
> > +	struct svc_i3c_master *master = (struct svc_i3c_master *)dev_id;
> > +	u32 status = readl(master->regs + SVC_I3C_MSTATUS);
> > +	unsigned int ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
> > +	struct i3c_dev_desc *dev;  
> 
> Do you really need a threaded irq? We already have a workqueue per
> master, maybe you can use it to schedule the IBI dequeuing?

Right, I moved the code to an "IBI work" over the master's workqueue.

> > +
> > +	dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
> > +	if (WARN_ON(!dev)) {
> > +		svc_i3c_master_emit_stop(master);
> > +		svc_i3c_master_flush_fifo(master);
> > +		return IRQ_HANDLED;
> > +	}
> > +
> > +	svc_i3c_master_handle_ibi(master, dev);
> > +	svc_i3c_master_enable_interrupts(master,
> > +					 SVC_I3C_MINT_SLVSTART |
> > +					 SVC_I3C_MINT_IBIWON);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +  

[...]

> > +static int svc_i3c_master_do_daa_locked(struct svc_i3c_master
*master,
> > +					u8 *addrs, unsigned int *count)
> > +{
> > +	u64 prov_id[SVC_I3C_MAX_DEVS] = {}, nacking_prov_id = 0;
> > +	unsigned int dev_nb = 0, last_addr = 0;
> > +	u32 reg;
> > +	int ret, i;
> > +
> > +	while (true) {
> > +		/* Enter/proceed with DAA */
> > +		writel(SVC_I3C_MCTRL_REQUEST_PROC_DAA |
> > +		       SVC_I3C_MCTRL_TYPE_I3C |
> > +		       SVC_I3C_MCTRL_IBIRESP_MANUAL |
> > +		       SVC_I3C_MCTRL_DIR(SVC_I3C_MCTRL_DIR_WRITE),
> > +		       master->regs + SVC_I3C_MCTRL);
> > +
> > +		/*
> > +		 * Either one slave will send its ID, or the assignment process
> > +		 * is done.
> > +		 */
> > +		ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
> > +					 reg & (SVC_I3C_MINT_RXPEND |
> > +						SVC_I3C_MINT_MCTRLDONE),
> > +					 1, 1000);  
> 
> No interrupt for the DAA? I'm also curious about the RX FIFO size.
> Looks like PIDs/BCRs/DCRs of attached devices go there. What happens if
> it exceeds the size of the FIFO and you're not dequeuing things fast
> enough?

Interrupts are available but for clarity reasons (the current handler
is already very complicated to avoid any races and prevent misreads
or endless loops) I decided to keep using polling here. I guess it does
not hurt anyway.

About the FIFO size, it is 16 bytes, so it is pretty safe for this kind
of operation.

> > +		if (ret)
> > +			return ret;
> > +
> > +		if (reg & SVC_I3C_MINT_RXPEND) {
> > +			u8 datab;
> > +
> > +			/*
> > +			 * We only care about the 48-bit provisional ID yet to
> > +			 * be sure a device does not nack an address twice.
> > +			 * Otherwise, we would just need to flush the RX FIFO.
> > +			 */
> > +			for (i = 0; i < 6; i++) {
> > +				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
> > +							 reg,
> > +							 reg & SVC_I3C_MINT_RXPEND,
> > +							 0, 1000);
> > +				if (ret)
> > +					return ret;
> > +
> > +				datab = readl(master->regs + SVC_I3C_MRDATAB);
> > +				prov_id[dev_nb] |= (u64)(datab) << (8 * (5 - i));  
> 
> This calls for an svc_i3c_read_bytes() helper.

Done.

> 
> > +			}
> > +
> > +			/* We do not care about the BCR and DCR yet */
> > +			for (i = 0; i < 2; i++) {
> > +				ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS,
> > +							 reg,
> > +							 reg & SVC_I3C_MINT_RXPEND,
> > +							 0, 1000);
> > +				if (ret)
> > +					return ret;
> > +
> > +				reg = readl(master->regs + SVC_I3C_MRDATAB);
> > +			}
> > +		} else if (SVC_I3C_MSTATUS_MCTRLDONE(reg)) {  
> 
> Can't you have both SVC_I3C_MSTATUS_MCTRLDONE and SVC_I3C_MINT_RXPEND?

If we have MCTRLDONE it means there is nothing left to read, so RXPEND
cannot be also set.

> BTW, can we make the bit definitions consistent. You sometimes have:
> 
> #define FOO(x)	FIELD_GET(BIT(n), (x))
> 
> and sometimes
> 
> #define BAR	BIT(n)
> 
> which leads to inconsistencies in how you test presence of those bits:
> 
> 'if (FOO(reg))' vs 'if (reg & BAR)'.

Done.

> > +			if (SVC_I3C_MSTATUS_STATE_IDLE(reg) &&
> > +			    SVC_I3C_MSTATUS_COMPLETE(reg)) {
> > +				/*
> > +				 * All devices received and acked they dynamic
> > +				 * address, this is the natural end of the DAA
> > +				 * procedure.
> > +				 */
> > +				break;
> > +			} else if (SVC_I3C_MSTATUS_NACKED(reg)) {
> > +				/*
> > +				 * A slave device nacked the address, this is
> > +				 * allowed only once, DAA will be stopped and
> > +				 * then resumed. The same device is supposed to
> > +				 * answer again immediately and shall ack the
> > +				 * address this time.
> > +				 */  
> 
> 
> I couldn't find where this is described in v1 of the spec. All I see is:
> 
> "
> The Arbitration-winning Device shall acknowledge the assigned Dynamic
> Address
> "

I was told to do it this way, and got the following snippet from the
I3C v1 spec:

"
If a given Slave does not acknowledge its assigned Dynamic Address,
then the procedure requires the Main Master to continue from step 4
[sending the broadcast address and iterating again]. The Slave will
then participate in the Address Arbitration using the same 48-bit
Provisional ID, and as a result the Slave will win the Arbitration
round. If the Slave does not ACK the Dynamic Address a second time,
then the Main Master shall exit the Dynamic Address Assignment
procedure and execute an error management procedure provided by the I3C
Bus designer.
"

> 
> > +				if (prov_id[dev_nb] ==
> > nacking_prov_id)
> > +					return -EIO;
> > +
> > +				dev_nb--;
> > +				nacking_prov_id = prov_id[dev_nb];
> > +				svc_i3c_master_emit_stop(master);
> > +
> > +				continue;
> > +			} else {
> > +				return -EIO;
> > +			}
> > +		}
> > +
> > +		/* Wait for the slave to be ready to receive its
> > address */
> > +		ret = readl_poll_timeout(master->regs +
> > SVC_I3C_MSTATUS, reg,
> > +
> > SVC_I3C_MSTATUS_MCTRLDONE(reg) &&
> > +
> > SVC_I3C_MSTATUS_STATE_DAA(reg) &&
> > +
> > SVC_I3C_MSTATUS_BETWEEN(reg),
> > +					 0, 1000);
> > +		if (ret)
> > +			return ret;
> > +
> > +		/* Give the slave device a suitable dynamic
> > address */
> > +		ret = i3c_master_get_free_addr(&master->base,
> > last_addr + 1);
> > +		if (ret < 0)
> > +			return ret;
> > +
> > +		addrs[dev_nb] = ret;
> > +
> > +		writel(addrs[dev_nb], master->regs +
> > SVC_I3C_MWDATAB);
> > +		last_addr = addrs[dev_nb++];
> > +	}
> > +
> > +	*count = dev_nb;
> > +
> > +	return 0;
> > +}  

Thanks for the review :)

Miquèl

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2020-12-28 16:04 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-12 14:13 [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Miquel Raynal
2020-08-12 14:13 ` [PATCH v2 2/4] dt-bindings: i3c: Describe Silvaco master binding Miquel Raynal
2020-08-24 23:24   ` Rob Herring
2020-08-12 14:13 ` [PATCH v2 3/4] i3c: master: svc: Add Silvaco I3C master driver Miquel Raynal
2020-08-12 15:18   ` Miquel Raynal
2020-08-19  9:04   ` Boris Brezillon
2020-12-28 16:04     ` Miquel Raynal
2020-08-12 14:13 ` [PATCH v2 4/4] MAINTAINERS: Add Silvaco I3C master Miquel Raynal
2020-08-12 15:07   ` Miquel Raynal
2020-08-24 23:21 ` [PATCH v2 1/4] dt-bindings: Add vendor prefix for Silvaco Rob Herring

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox