linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/9] libata cleanups and improvements
@ 2021-08-06 11:11 Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo() Damien Le Moal
                   ` (8 more replies)
  0 siblings, 9 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

The first two patches of this series fix potential NULL pointer
dereference problems.

The following three patches cleanup libata-core code in the area of
device configuration (ata_dev_configure() function).

Patch 6 improves ata_read_log_page() to avoid unnecessary warning
messages and patch 7 adds an informational message on device scan to
advertize the features supported by a device.

Path 8 adds the new sysfs ahci device attribute ncq_prio_supported to
indicate that a disk supports NCQ priority. Patch 9 does the same for
the mpt3sas driver, adding the sas_ncq_prio_supported device attribute.

Changes from v2:
* Reworked patch 4 to avoid the need for an additional on-stack string
  for device information messages
* Added reviewed-by tags

Changes from v1:
* Added patch 1 and 2 to fix problems reported by the kernel test robot
* Use strscpy() instead of strcpy in patch 4
* Use sysfs_emit in patch 8 and 9 as suggested by Bart
* Fix typos in comments of the new sas_ncq_prio_supported attribute in
  patch 9

Damien Le Moal (9):
  libata: fix ata_host_alloc_pinfo()
  libata: fix ata_host_start()
  libata: cleanup device sleep capability detection
  libata: cleanup ata_dev_configure()
  libata: cleanup NCQ priority handling
  libata: fix ata_read_log_page() warning
  libata: print feature list on device scan
  libahci: Introduce ncq_prio_supported sysfs sttribute
  scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute

 drivers/ata/libahci.c              |   1 +
 drivers/ata/libata-core.c          | 274 ++++++++++++++++-------------
 drivers/ata/libata-sata.c          |  61 ++++---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c |  19 ++
 include/linux/libata.h             |   5 +
 5 files changed, 208 insertions(+), 152 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo()
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 2/9] libata: fix ata_host_start() Damien Le Moal
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Avoid a potential NULL pointer dereference by testing that the ATA port
info variable "pi".

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 61c762961ca8..ea8b91297f12 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5458,7 +5458,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 		ap->link.flags |= pi->link_flags;
 		ap->ops = pi->port_ops;
 
-		if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
+		if (!host->ops && pi && pi->port_ops != &ata_dummy_port_ops)
 			host->ops = pi->port_ops;
 	}
 
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 2/9] libata: fix ata_host_start()
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo() Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 3/9] libata: cleanup device sleep capability detection Damien Le Moal
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ea8b91297f12..fe49197caf99 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5573,7 +5573,7 @@ int ata_host_start(struct ata_host *host)
 			have_stop = 1;
 	}
 
-	if (host->ops->host_stop)
+	if (host->ops && host->ops->host_stop)
 		have_stop = 1;
 
 	if (have_stop) {
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 3/9] libata: cleanup device sleep capability detection
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo() Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 2/9] libata: fix ata_host_start() Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 4/9] libata: cleanup ata_dev_configure() Damien Le Moal
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Move the code to retrieve the device sleep capability and timings out of
ata_dev_configure() into the helper function ata_dev_config_devslp().
While at it, mark the device as supporting the device sleep capability
only if the sata settings page was retrieved successfully to ensure that
the timing information is correctly initialized.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 55 +++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 23 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fe49197caf99..b13194432e5a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2363,6 +2363,37 @@ static void ata_dev_config_trusted(struct ata_device *dev)
 		dev->flags |= ATA_DFLAG_TRUSTED;
 }
 
+static void ata_dev_config_devslp(struct ata_device *dev)
+{
+	u8 *sata_setting = dev->link->ap->sector_buf;
+	unsigned int err_mask;
+	int i, j;
+
+	/*
+	 * Check device sleep capability. Get DevSlp timing variables
+	 * from SATA Settings page of Identify Device Data Log.
+	 */
+	if (!ata_id_has_devslp(dev->id))
+		return;
+
+	err_mask = ata_read_log_page(dev,
+				     ATA_LOG_IDENTIFY_DEVICE,
+				     ATA_LOG_SATA_SETTINGS,
+				     sata_setting, 1);
+	if (err_mask) {
+		ata_dev_dbg(dev,
+			    "failed to get SATA Settings Log, Emask 0x%x\n",
+			    err_mask);
+		return;
+	}
+
+	dev->flags |= ATA_DFLAG_DEVSLP;
+	for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
+		j = ATA_LOG_DEVSLP_OFFSET + i;
+		dev->devslp_timing[i] = sata_setting[j];
+	}
+}
+
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2565,29 +2596,7 @@ int ata_dev_configure(struct ata_device *dev)
 			}
 		}
 
-		/* Check and mark DevSlp capability. Get DevSlp timing variables
-		 * from SATA Settings page of Identify Device Data Log.
-		 */
-		if (ata_id_has_devslp(dev->id)) {
-			u8 *sata_setting = ap->sector_buf;
-			int i, j;
-
-			dev->flags |= ATA_DFLAG_DEVSLP;
-			err_mask = ata_read_log_page(dev,
-						     ATA_LOG_IDENTIFY_DEVICE,
-						     ATA_LOG_SATA_SETTINGS,
-						     sata_setting,
-						     1);
-			if (err_mask)
-				ata_dev_dbg(dev,
-					    "failed to get Identify Device Data, Emask 0x%x\n",
-					    err_mask);
-			else
-				for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
-					j = ATA_LOG_DEVSLP_OFFSET + i;
-					dev->devslp_timing[i] = sata_setting[j];
-				}
-		}
+		ata_dev_config_devslp(dev);
 		ata_dev_config_sense_reporting(dev);
 		ata_dev_config_zac(dev);
 		ata_dev_config_trusted(dev);
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (2 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 3/9] libata: cleanup device sleep capability detection Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:35   ` Hannes Reinecke
  2021-08-06 11:11 ` [PATCH v3 5/9] libata: cleanup NCQ priority handling Damien Le Moal
                   ` (4 subsequent siblings)
  8 siblings, 1 reply; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Introduce the helper functions ata_dev_config_lba() and
ata_dev_config_chs() to configure the addressing capabilities of a
device. To control message printing in these new helpers, as well as
in ata_dev_configure() and in ata_hpa_resize(), add the helper function
ata_dev_print_info() to avoid open coding for the eh context
ATA_EHI_PRINTINFO flag in multiple functions.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 drivers/ata/libata-core.c | 131 ++++++++++++++++++++++----------------
 1 file changed, 75 insertions(+), 56 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b13194432e5a..d3076283f9ce 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -159,6 +159,12 @@ MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+static inline bool ata_dev_print_info(struct ata_device *dev)
+{
+	struct ata_eh_context *ehc = &dev->link->eh_context;
+
+	return ehc->i.flags & ATA_EHI_PRINTINFO;
+}
 
 static bool ata_sstatus_online(u32 sstatus)
 {
@@ -1266,8 +1272,7 @@ static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
  */
 static int ata_hpa_resize(struct ata_device *dev)
 {
-	struct ata_eh_context *ehc = &dev->link->eh_context;
-	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+	bool print_info = ata_dev_print_info(dev);
 	bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
 	u64 sectors = ata_id_n_sectors(dev->id);
 	u64 native_sectors;
@@ -2363,6 +2368,65 @@ static void ata_dev_config_trusted(struct ata_device *dev)
 		dev->flags |= ATA_DFLAG_TRUSTED;
 }
 
+static int ata_dev_config_lba(struct ata_device *dev)
+{
+	struct ata_port *ap = dev->link->ap;
+	const u16 *id = dev->id;
+	const char *lba_desc;
+	char ncq_desc[24];
+	int ret;
+
+	dev->flags |= ATA_DFLAG_LBA;
+
+	if (ata_id_has_lba48(id)) {
+		lba_desc = "LBA48";
+		dev->flags |= ATA_DFLAG_LBA48;
+		if (dev->n_sectors >= (1UL << 28) &&
+		    ata_id_has_flush_ext(id))
+			dev->flags |= ATA_DFLAG_FLUSH_EXT;
+	} else {
+		lba_desc = "LBA";
+	}
+
+	/* config NCQ */
+	ret = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+
+	/* print device info to dmesg */
+	if (ata_msg_drv(ap) && ata_dev_print_info(dev))
+		ata_dev_info(dev,
+			     "%llu sectors, multi %u: %s %s\n",
+			     (unsigned long long)dev->n_sectors,
+			     dev->multi_count, lba_desc, ncq_desc);
+
+	return ret;
+}
+
+static void ata_dev_config_chs(struct ata_device *dev)
+{
+	struct ata_port *ap = dev->link->ap;
+	const u16 *id = dev->id;
+
+	if (ata_id_current_chs_valid(id)) {
+		/* Current CHS translation is valid. */
+		dev->cylinders = id[54];
+		dev->heads     = id[55];
+		dev->sectors   = id[56];
+	} else {
+		/* Default translation */
+		dev->cylinders	= id[1];
+		dev->heads	= id[3];
+		dev->sectors	= id[6];
+	}
+
+	/* print device info to dmesg */
+	if (ata_msg_drv(ap) && ata_dev_print_info(dev))
+		ata_dev_info(dev,
+			     "%llu sectors, multi %u, CHS %u/%u/%u\n",
+			     (unsigned long long)dev->n_sectors,
+			     dev->multi_count, dev->cylinders,
+			     dev->heads, dev->sectors);
+}
+
 static void ata_dev_config_devslp(struct ata_device *dev)
 {
 	u8 *sata_setting = dev->link->ap->sector_buf;
@@ -2410,8 +2474,7 @@ static void ata_dev_config_devslp(struct ata_device *dev)
 int ata_dev_configure(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->link->ap;
-	struct ata_eh_context *ehc = &dev->link->eh_context;
-	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+	bool print_info = ata_dev_print_info(dev);
 	const u16 *id = dev->id;
 	unsigned long xfer_mask;
 	unsigned int err_mask;
@@ -2538,62 +2601,18 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->multi_count = cnt;
 		}
 
-		if (ata_id_has_lba(id)) {
-			const char *lba_desc;
-			char ncq_desc[24];
-
-			lba_desc = "LBA";
-			dev->flags |= ATA_DFLAG_LBA;
-			if (ata_id_has_lba48(id)) {
-				dev->flags |= ATA_DFLAG_LBA48;
-				lba_desc = "LBA48";
-
-				if (dev->n_sectors >= (1UL << 28) &&
-				    ata_id_has_flush_ext(id))
-					dev->flags |= ATA_DFLAG_FLUSH_EXT;
-			}
+		/* print device info to dmesg */
+		if (ata_msg_drv(ap) && print_info)
+			ata_dev_info(dev, "%s: %s, %s, max %s\n",
+				     revbuf, modelbuf, fwrevbuf,
+				     ata_mode_string(xfer_mask));
 
-			/* config NCQ */
-			rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+		if (ata_id_has_lba(id)) {
+			rc = ata_dev_config_lba(dev);
 			if (rc)
 				return rc;
-
-			/* print device info to dmesg */
-			if (ata_msg_drv(ap) && print_info) {
-				ata_dev_info(dev, "%s: %s, %s, max %s\n",
-					     revbuf, modelbuf, fwrevbuf,
-					     ata_mode_string(xfer_mask));
-				ata_dev_info(dev,
-					     "%llu sectors, multi %u: %s %s\n",
-					(unsigned long long)dev->n_sectors,
-					dev->multi_count, lba_desc, ncq_desc);
-			}
 		} else {
-			/* CHS */
-
-			/* Default translation */
-			dev->cylinders	= id[1];
-			dev->heads	= id[3];
-			dev->sectors	= id[6];
-
-			if (ata_id_current_chs_valid(id)) {
-				/* Current CHS translation is valid. */
-				dev->cylinders = id[54];
-				dev->heads     = id[55];
-				dev->sectors   = id[56];
-			}
-
-			/* print device info to dmesg */
-			if (ata_msg_drv(ap) && print_info) {
-				ata_dev_info(dev, "%s: %s, %s, max %s\n",
-					     revbuf,	modelbuf, fwrevbuf,
-					     ata_mode_string(xfer_mask));
-				ata_dev_info(dev,
-					     "%llu sectors, multi %u, CHS %u/%u/%u\n",
-					     (unsigned long long)dev->n_sectors,
-					     dev->multi_count, dev->cylinders,
-					     dev->heads, dev->sectors);
-			}
+			ata_dev_config_chs(dev);
 		}
 
 		ata_dev_config_devslp(dev);
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 5/9] libata: cleanup NCQ priority handling
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (3 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 4/9] libata: cleanup ata_dev_configure() Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 6/9] libata: fix ata_read_log_page() warning Damien Le Moal
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

The ata device flag ATA_DFLAG_NCQ_PRIO indicates if a device supports
the NCQ Priority feature while the ATA_DFLAG_NCQ_PRIO_ENABLE device
flag indicates if the feature is enabled. Enabling NCQ priority use is
controlled by the user through the device sysfs attribute
ncq_prio_enable. As a result, the ATA_DFLAG_NCQ_PRIO flag should not be
cleared when ATA_DFLAG_NCQ_PRIO_ENABLE is not set as the device still
supports the feature even after the user disables it. This leads to the
following cleanups:
- In ata_build_rw_tf(), set a command high priority bit based on the
  ATA_DFLAG_NCQ_PRIO_ENABLE flag, not on the ATA_DFLAG_NCQ flag. That
  is, set a command high priority only if the user enabled NCQ priority
  use.
- In ata_dev_config_ncq_prio(), ATA_DFLAG_NCQ_PRIO should not be cleared
  if ATA_DFLAG_NCQ_PRIO_ENABLE is not set. If the device does not
  support NCQ priority, both ATA_DFLAG_NCQ_PRIO and
  ATA_DFLAG_NCQ_PRIO_ENABLE must be cleared.

With the above ata_dev_config_ncq_prio() change, ATA_DFLAG_NCQ_PRIO flag
is set on device scan and revalidation. There is no need to trigger a
device revalidation in ata_ncq_prio_enable_store() when the user enables
the use of NCQ priority. Remove the revalidation code from that funciton
to simplify it. Also change the return value from -EIO to -EINVAL when a
user tries to enable NCQ priority for a device that does not support
this feature.  While at it, also simplify ata_ncq_prio_enable_show().

Overall, there is no functional change introduced by this patch.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 32 ++++++++++++++------------------
 drivers/ata/libata-sata.c | 37 ++++++++++++-------------------------
 2 files changed, 26 insertions(+), 43 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d3076283f9ce..3e574e29ee37 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -712,11 +712,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 		if (tf->flags & ATA_TFLAG_FUA)
 			tf->device |= 1 << 7;
 
-		if (dev->flags & ATA_DFLAG_NCQ_PRIO) {
-			if (class == IOPRIO_CLASS_RT)
-				tf->hob_nsect |= ATA_PRIO_HIGH <<
-						 ATA_SHIFT_PRIO;
-		}
+		if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE &&
+		    class == IOPRIO_CLASS_RT)
+			tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO;
 	} else if (dev->flags & ATA_DFLAG_LBA) {
 		tf->flags |= ATA_TFLAG_LBA;
 
@@ -2178,11 +2176,6 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
 	struct ata_port *ap = dev->link->ap;
 	unsigned int err_mask;
 
-	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE)) {
-		dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
-		return;
-	}
-
 	err_mask = ata_read_log_page(dev,
 				     ATA_LOG_IDENTIFY_DEVICE,
 				     ATA_LOG_SATA_SETTINGS,
@@ -2190,18 +2183,21 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
 				     1);
 	if (err_mask) {
 		ata_dev_dbg(dev,
-			    "failed to get Identify Device data, Emask 0x%x\n",
+			    "failed to get SATA settings log, Emask 0x%x\n",
 			    err_mask);
-		return;
+		goto not_supported;
 	}
 
-	if (ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)) {
-		dev->flags |= ATA_DFLAG_NCQ_PRIO;
-	} else {
-		dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
-		ata_dev_dbg(dev, "SATA page does not support priority\n");
-	}
+	if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)))
+		goto not_supported;
+
+	dev->flags |= ATA_DFLAG_NCQ_PRIO;
+
+	return;
 
+not_supported:
+	dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
+	dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
 }
 
 static int ata_dev_config_ncq(struct ata_device *dev,
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 8adeab76dd38..dc397ebda089 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -839,23 +839,17 @@ static ssize_t ata_ncq_prio_enable_show(struct device *device,
 					char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
 	bool ncq_prio_enable;
 	int rc = 0;
 
-	ap = ata_shost_to_port(sdev->host);
-
 	spin_lock_irq(ap->lock);
 	dev = ata_scsi_find_dev(ap, sdev);
-	if (!dev) {
+	if (!dev)
 		rc = -ENODEV;
-		goto unlock;
-	}
-
-	ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
-
-unlock:
+	else
+		ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
 	spin_unlock_irq(ap->lock);
 
 	return rc ? rc : snprintf(buf, 20, "%u\n", ncq_prio_enable);
@@ -869,7 +863,7 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
 	struct ata_port *ap;
 	struct ata_device *dev;
 	long int input;
-	int rc;
+	int rc = 0;
 
 	rc = kstrtol(buf, 10, &input);
 	if (rc)
@@ -883,27 +877,20 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
 		return  -ENODEV;
 
 	spin_lock_irq(ap->lock);
+
+	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
+		rc = -EINVAL;
+		goto unlock;
+	}
+
 	if (input)
 		dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE;
 	else
 		dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
 
-	dev->link->eh_info.action |= ATA_EH_REVALIDATE;
-	dev->link->eh_info.flags |= ATA_EHI_QUIET;
-	ata_port_schedule_eh(ap);
+unlock:
 	spin_unlock_irq(ap->lock);
 
-	ata_port_wait_eh(ap);
-
-	if (input) {
-		spin_lock_irq(ap->lock);
-		if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
-			dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
-			rc = -EIO;
-		}
-		spin_unlock_irq(ap->lock);
-	}
-
 	return rc ? rc : len;
 }
 
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 6/9] libata: fix ata_read_log_page() warning
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (4 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 5/9] libata: cleanup NCQ priority handling Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 7/9] libata: print feature list on device scan Damien Le Moal
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Support for the READ LOG PAGE DMA EXT command is indicated by words 119
and 120 of a device identify data. This is tested in
ata_read_log_page() with ata_id_has_read_log_dma_ext() and the
READ LOG PAGE DMA command used if the device reports supports for it.

However, some devices lie about this support and using the DMA version
of the command fails, generating the warning message "READ LOG DMA EXT
failed, trying PIO". Since READ LOG PAGE DMA EXT is an optional command,
this warning is not at all important but may be scary for the user.
Change ata_read_log_page() to suppres this warning and to print an
error message if both DMA and PIO attempts failed.

With this change, there is no need to print again an error message when
ata_read_log_page() returns an error. So simplify the users of this
function.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 47 +++++++++++----------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3e574e29ee37..e0ab03f59a8f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2026,13 +2026,15 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
 				     buf, sectors * ATA_SECT_SIZE, 0);
 
-	if (err_mask && dma) {
-		dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
-		ata_dev_warn(dev, "READ LOG DMA EXT failed, trying PIO\n");
-		goto retry;
+	if (err_mask) {
+		if (dma) {
+			dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
+			goto retry;
+		}
+		ata_dev_err(dev, "Read log page 0x%02x failed, Emask 0x%x\n",
+			    (unsigned int)page, err_mask);
 	}
 
-	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
 }
 
@@ -2061,12 +2063,8 @@ static bool ata_identify_page_supported(struct ata_device *dev, u8 page)
 	 */
 	err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, 0, ap->sector_buf,
 				1);
-	if (err) {
-		ata_dev_info(dev,
-			     "failed to get Device Identify Log Emask 0x%x\n",
-			     err);
+	if (err)
 		return false;
-	}
 
 	for (i = 0; i < ap->sector_buf[8]; i++) {
 		if (ap->sector_buf[9 + i] == page)
@@ -2130,11 +2128,7 @@ static void ata_dev_config_ncq_send_recv(struct ata_device *dev)
 	}
 	err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
 				     0, ap->sector_buf, 1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to get NCQ Send/Recv Log Emask 0x%x\n",
-			    err_mask);
-	} else {
+	if (!err_mask) {
 		u8 *cmds = dev->ncq_send_recv_cmds;
 
 		dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
@@ -2160,11 +2154,7 @@ static void ata_dev_config_ncq_non_data(struct ata_device *dev)
 	}
 	err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
 				     0, ap->sector_buf, 1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to get NCQ Non-Data Log Emask 0x%x\n",
-			    err_mask);
-	} else {
+	if (!err_mask) {
 		u8 *cmds = dev->ncq_non_data_cmds;
 
 		memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_NON_DATA_SIZE);
@@ -2181,12 +2171,8 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
 				     ATA_LOG_SATA_SETTINGS,
 				     ap->sector_buf,
 				     1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to get SATA settings log, Emask 0x%x\n",
-			    err_mask);
+	if (err_mask)
 		goto not_supported;
-	}
 
 	if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)))
 		goto not_supported;
@@ -2347,11 +2333,8 @@ static void ata_dev_config_trusted(struct ata_device *dev)
 
 	err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, ATA_LOG_SECURITY,
 			ap->sector_buf, 1);
-	if (err) {
-		ata_dev_dbg(dev,
-			    "failed to read Security Log, Emask 0x%x\n", err);
+	if (err)
 		return;
-	}
 
 	trusted_cap = get_unaligned_le64(&ap->sector_buf[40]);
 	if (!(trusted_cap & (1ULL << 63))) {
@@ -2440,12 +2423,8 @@ static void ata_dev_config_devslp(struct ata_device *dev)
 				     ATA_LOG_IDENTIFY_DEVICE,
 				     ATA_LOG_SATA_SETTINGS,
 				     sata_setting, 1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to get SATA Settings Log, Emask 0x%x\n",
-			    err_mask);
+	if (err_mask)
 		return;
-	}
 
 	dev->flags |= ATA_DFLAG_DEVSLP;
 	for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 7/9] libata: print feature list on device scan
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (5 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 6/9] libata: fix ata_read_log_page() warning Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute Damien Le Moal
  2021-08-06 11:11 ` [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported " Damien Le Moal
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Print a list of features supported by a drive when it is configured in
ata_dev_configure() using the new function ata_dev_print_features().
The features printed are not already advertized and are: trusted
send-recev support, device attention support, device sleep support,
NCQ send-recv support and NCQ priority support.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/libata-core.c | 17 +++++++++++++++++
 include/linux/libata.h    |  4 ++++
 2 files changed, 21 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e0ab03f59a8f..6d5d99ccbff3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2433,6 +2433,20 @@ static void ata_dev_config_devslp(struct ata_device *dev)
 	}
 }
 
+static void ata_dev_print_features(struct ata_device *dev)
+{
+	if (!(dev->flags & ATA_DFLAG_FEATURES_MASK))
+		return;
+
+	ata_dev_info(dev,
+		     "Features:%s%s%s%s%s\n",
+		     dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "",
+		     dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "",
+		     dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "",
+		     dev->flags & ATA_DFLAG_NCQ_SEND_RECV ? " NCQ-sndrcv" : "",
+		     dev->flags & ATA_DFLAG_NCQ_PRIO ? " NCQ-prio" : "");
+}
+
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2595,6 +2609,9 @@ int ata_dev_configure(struct ata_device *dev)
 		ata_dev_config_zac(dev);
 		ata_dev_config_trusted(dev);
 		dev->cdb_len = 32;
+
+		if (ata_msg_drv(ap) && print_info)
+			ata_dev_print_features(dev);
 	}
 
 	/* ATAPI-specific feature tests */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3fcd24236793..b23f28cfc8e0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -161,6 +161,10 @@ enum {
 	ATA_DFLAG_D_SENSE	= (1 << 29), /* Descriptor sense requested */
 	ATA_DFLAG_ZAC		= (1 << 30), /* ZAC device */
 
+	ATA_DFLAG_FEATURES_MASK	= ATA_DFLAG_TRUSTED | ATA_DFLAG_DA | \
+				  ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \
+				  ATA_DFLAG_NCQ_PRIO,
+
 	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
 	ATA_DEV_ATA		= 1,	/* ATA device */
 	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (6 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 7/9] libata: print feature list on device scan Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  2021-08-06 11:37   ` Hannes Reinecke
  2021-08-06 11:11 ` [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported " Damien Le Moal
  8 siblings, 1 reply; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Currently, the only way a user can determine if a SATA device supports
NCQ priority is to try to enable the use of this feature using the
ncq_prio_enable sysfs device attribute. If enabling the feature fails,
it is because the device does not support NCQ priority. Otherwise, the
feature is enabled and indicates that the device supports NCQ priority.

Improve this odd interface by introducing the read-only
ncq_prio_supported sysfs device attribute to indicate if a SATA device
supports NCQ priority. The value of this attribute reflects if the
device flag ATA_DFLAG_NCQ_PRIO is set or cleared.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 drivers/ata/libahci.c     |  1 +
 drivers/ata/libata-sata.c | 24 ++++++++++++++++++++++++
 include/linux/libata.h    |  1 +
 3 files changed, 26 insertions(+)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index fec2e9754aed..5b3fa2cbe722 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -125,6 +125,7 @@ EXPORT_SYMBOL_GPL(ahci_shost_attrs);
 struct device_attribute *ahci_sdev_attrs[] = {
 	&dev_attr_sw_activity,
 	&dev_attr_unload_heads,
+	&dev_attr_ncq_prio_supported,
 	&dev_attr_ncq_prio_enable,
 	NULL
 };
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index dc397ebda089..5566fd4bb38f 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -834,6 +834,30 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *dev;
+	bool ncq_prio_supported;
+	int rc = 0;
+
+	spin_lock_irq(ap->lock);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev)
+		rc = -ENODEV;
+	else
+		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+	spin_unlock_irq(ap->lock);
+
+	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+}
+
+DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
+
 static ssize_t ata_ncq_prio_enable_show(struct device *device,
 					struct device_attribute *attr,
 					char *buf)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b23f28cfc8e0..a2d1bae7900b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -539,6 +539,7 @@ typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes)
 extern struct device_attribute dev_attr_unload_heads;
 #ifdef CONFIG_SATA_HOST
 extern struct device_attribute dev_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_ncq_prio_supported;
 extern struct device_attribute dev_attr_ncq_prio_enable;
 extern struct device_attribute dev_attr_em_message_type;
 extern struct device_attribute dev_attr_em_message;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
                   ` (7 preceding siblings ...)
  2021-08-06 11:11 ` [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute Damien Le Moal
@ 2021-08-06 11:11 ` Damien Le Moal
  8 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 11:11 UTC (permalink / raw)
  To: Jens Axboe, linux-block, linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

Similarly to AHCI, introduce the device sysfs attribute
sas_ncq_prio_supported to advertize if a SATA device supports the NCQ
priority feature. Without this new attribute, the user can only
discover if a SATA device supports NCQ priority by trying to enable
the feature use with the sas_ncq_prio_enable sysfs device attribute,
which fails when the device does not support high priroity commands.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index b66140e4c370..f83d4d32d459 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3918,6 +3918,24 @@ sas_device_handle_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(sas_device_handle);
 
+/**
+ * sas_ncq_prio_supported_show - Indicate if device supports NCQ priority
+ * @dev: pointer to embedded device
+ * @attr: sas_ncq_prio_supported attribute descriptor
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' sdev attribute, only works with SATA
+ */
+static ssize_t
+sas_ncq_prio_supported_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev));
+}
+static DEVICE_ATTR_RO(sas_ncq_prio_supported);
+
 /**
  * sas_ncq_prio_enable_show - send prioritized io commands to device
  * @dev: pointer to embedded device
@@ -3960,6 +3978,7 @@ static DEVICE_ATTR_RW(sas_ncq_prio_enable);
 struct device_attribute *mpt3sas_dev_attrs[] = {
 	&dev_attr_sas_address,
 	&dev_attr_sas_device_handle,
+	&dev_attr_sas_ncq_prio_supported,
 	&dev_attr_sas_ncq_prio_enable,
 	NULL,
 };
-- 
2.31.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  2021-08-06 11:11 ` [PATCH v3 4/9] libata: cleanup ata_dev_configure() Damien Le Moal
@ 2021-08-06 11:35   ` Hannes Reinecke
  0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2021-08-06 11:35 UTC (permalink / raw)
  To: Damien Le Moal, Jens Axboe, linux-block, linux-ide,
	Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

On 8/6/21 1:11 PM, Damien Le Moal wrote:
> Introduce the helper functions ata_dev_config_lba() and
> ata_dev_config_chs() to configure the addressing capabilities of a
> device. To control message printing in these new helpers, as well as
> in ata_dev_configure() and in ata_hpa_resize(), add the helper function
> ata_dev_print_info() to avoid open coding for the eh context
> ATA_EHI_PRINTINFO flag in multiple functions.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  drivers/ata/libata-core.c | 131 ++++++++++++++++++++++----------------
>  1 file changed, 75 insertions(+), 56 deletions(-)
> 
Much better.

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		           Kernel Storage Architect
hare@suse.de			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  2021-08-06 11:11 ` [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute Damien Le Moal
@ 2021-08-06 11:37   ` Hannes Reinecke
  2021-08-06 12:17     ` Damien Le Moal
  0 siblings, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2021-08-06 11:37 UTC (permalink / raw)
  To: Damien Le Moal, Jens Axboe, linux-block, linux-ide,
	Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

On 8/6/21 1:11 PM, Damien Le Moal wrote:
> Currently, the only way a user can determine if a SATA device supports
> NCQ priority is to try to enable the use of this feature using the
> ncq_prio_enable sysfs device attribute. If enabling the feature fails,
> it is because the device does not support NCQ priority. Otherwise, the
> feature is enabled and indicates that the device supports NCQ priority.
> 
> Improve this odd interface by introducing the read-only
> ncq_prio_supported sysfs device attribute to indicate if a SATA device
> supports NCQ priority. The value of this attribute reflects if the
> device flag ATA_DFLAG_NCQ_PRIO is set or cleared.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  drivers/ata/libahci.c     |  1 +
>  drivers/ata/libata-sata.c | 24 ++++++++++++++++++++++++
>  include/linux/libata.h    |  1 +
>  3 files changed, 26 insertions(+)
> 
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index fec2e9754aed..5b3fa2cbe722 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -125,6 +125,7 @@ EXPORT_SYMBOL_GPL(ahci_shost_attrs);
>  struct device_attribute *ahci_sdev_attrs[] = {
>  	&dev_attr_sw_activity,
>  	&dev_attr_unload_heads,
> +	&dev_attr_ncq_prio_supported,
>  	&dev_attr_ncq_prio_enable,
>  	NULL
>  };
> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
> index dc397ebda089..5566fd4bb38f 100644
> --- a/drivers/ata/libata-sata.c
> +++ b/drivers/ata/libata-sata.c
> @@ -834,6 +834,30 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
>  	    ata_scsi_lpm_show, ata_scsi_lpm_store);
>  EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
>  
> +static ssize_t ata_ncq_prio_supported_show(struct device *device,
> +					   struct device_attribute *attr,
> +					   char *buf)
> +{
> +	struct scsi_device *sdev = to_scsi_device(device);
> +	struct ata_port *ap = ata_shost_to_port(sdev->host);
> +	struct ata_device *dev;
> +	bool ncq_prio_supported;
> +	int rc = 0;
> +
> +	spin_lock_irq(ap->lock);
> +	dev = ata_scsi_find_dev(ap, sdev);
> +	if (!dev)
> +		rc = -ENODEV;
> +	else
> +		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
> +	spin_unlock_irq(ap->lock);
> +
> +	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
> +}
> +
> +DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
> +EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
> +
>  static ssize_t ata_ncq_prio_enable_show(struct device *device,
>  					struct device_attribute *attr,
>  					char *buf)
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index b23f28cfc8e0..a2d1bae7900b 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -539,6 +539,7 @@ typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes)
>  extern struct device_attribute dev_attr_unload_heads;
>  #ifdef CONFIG_SATA_HOST
>  extern struct device_attribute dev_attr_link_power_management_policy;
> +extern struct device_attribute dev_attr_ncq_prio_supported;
>  extern struct device_attribute dev_attr_ncq_prio_enable;
>  extern struct device_attribute dev_attr_em_message_type;
>  extern struct device_attribute dev_attr_em_message;
> 
Alternative would have been to make the 'ncq_prio_enable' attribute
visible only when NCQ prio is supported, but not sure if that works out.

So:

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		           Kernel Storage Architect
hare@suse.de			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  2021-08-06 11:37   ` Hannes Reinecke
@ 2021-08-06 12:17     ` Damien Le Moal
  0 siblings, 0 replies; 13+ messages in thread
From: Damien Le Moal @ 2021-08-06 12:17 UTC (permalink / raw)
  To: Hannes Reinecke, Damien Le Moal, Jens Axboe, linux-block,
	linux-ide, Martin K . Petersen, linux-scsi
  Cc: Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani

On 2021/08/06 20:37, Hannes Reinecke wrote:
> On 8/6/21 1:11 PM, Damien Le Moal wrote:
>> Currently, the only way a user can determine if a SATA device supports
>> NCQ priority is to try to enable the use of this feature using the
>> ncq_prio_enable sysfs device attribute. If enabling the feature fails,
>> it is because the device does not support NCQ priority. Otherwise, the
>> feature is enabled and indicates that the device supports NCQ priority.
>>
>> Improve this odd interface by introducing the read-only
>> ncq_prio_supported sysfs device attribute to indicate if a SATA device
>> supports NCQ priority. The value of this attribute reflects if the
>> device flag ATA_DFLAG_NCQ_PRIO is set or cleared.
>>
>> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
>> ---
>>  drivers/ata/libahci.c     |  1 +
>>  drivers/ata/libata-sata.c | 24 ++++++++++++++++++++++++
>>  include/linux/libata.h    |  1 +
>>  3 files changed, 26 insertions(+)
>>
>> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
>> index fec2e9754aed..5b3fa2cbe722 100644
>> --- a/drivers/ata/libahci.c
>> +++ b/drivers/ata/libahci.c
>> @@ -125,6 +125,7 @@ EXPORT_SYMBOL_GPL(ahci_shost_attrs);
>>  struct device_attribute *ahci_sdev_attrs[] = {
>>  	&dev_attr_sw_activity,
>>  	&dev_attr_unload_heads,
>> +	&dev_attr_ncq_prio_supported,
>>  	&dev_attr_ncq_prio_enable,
>>  	NULL
>>  };
>> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
>> index dc397ebda089..5566fd4bb38f 100644
>> --- a/drivers/ata/libata-sata.c
>> +++ b/drivers/ata/libata-sata.c
>> @@ -834,6 +834,30 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
>>  	    ata_scsi_lpm_show, ata_scsi_lpm_store);
>>  EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
>>  
>> +static ssize_t ata_ncq_prio_supported_show(struct device *device,
>> +					   struct device_attribute *attr,
>> +					   char *buf)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(device);
>> +	struct ata_port *ap = ata_shost_to_port(sdev->host);
>> +	struct ata_device *dev;
>> +	bool ncq_prio_supported;
>> +	int rc = 0;
>> +
>> +	spin_lock_irq(ap->lock);
>> +	dev = ata_scsi_find_dev(ap, sdev);
>> +	if (!dev)
>> +		rc = -ENODEV;
>> +	else
>> +		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
>> +	spin_unlock_irq(ap->lock);
>> +
>> +	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
>> +}
>> +
>> +DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
>> +EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
>> +
>>  static ssize_t ata_ncq_prio_enable_show(struct device *device,
>>  					struct device_attribute *attr,
>>  					char *buf)
>> diff --git a/include/linux/libata.h b/include/linux/libata.h
>> index b23f28cfc8e0..a2d1bae7900b 100644
>> --- a/include/linux/libata.h
>> +++ b/include/linux/libata.h
>> @@ -539,6 +539,7 @@ typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes)
>>  extern struct device_attribute dev_attr_unload_heads;
>>  #ifdef CONFIG_SATA_HOST
>>  extern struct device_attribute dev_attr_link_power_management_policy;
>> +extern struct device_attribute dev_attr_ncq_prio_supported;
>>  extern struct device_attribute dev_attr_ncq_prio_enable;
>>  extern struct device_attribute dev_attr_em_message_type;
>>  extern struct device_attribute dev_attr_em_message;
>>
> Alternative would have been to make the 'ncq_prio_enable' attribute
> visible only when NCQ prio is supported, but not sure if that works out.

Indeed. But from the start (4.10) ncq_prio_enable is always shown, even for
devices that do not support NCQ prio. I am not sure if changing that is
acceptable as this is a user IF.

> 
> So:
> 
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> 
> Cheers,
> 
> Hannes
> 


-- 
Damien Le Moal
Western Digital Research

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2021-08-06 12:17 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-06 11:11 [PATCH v3 0/9] libata cleanups and improvements Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo() Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 2/9] libata: fix ata_host_start() Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 3/9] libata: cleanup device sleep capability detection Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 4/9] libata: cleanup ata_dev_configure() Damien Le Moal
2021-08-06 11:35   ` Hannes Reinecke
2021-08-06 11:11 ` [PATCH v3 5/9] libata: cleanup NCQ priority handling Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 6/9] libata: fix ata_read_log_page() warning Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 7/9] libata: print feature list on device scan Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute Damien Le Moal
2021-08-06 11:37   ` Hannes Reinecke
2021-08-06 12:17     ` Damien Le Moal
2021-08-06 11:11 ` [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported " Damien Le Moal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).