From: Damien Le Moal <damien.lemoal@wdc.com>
To: Jens Axboe <axboe@kernel.dk>, linux-ide@vger.kernel.org
Cc: linux-block@vger.kernel.org
Subject: [PATCH v6 8/9] libata: print feature list on device scan
Date: Thu, 12 Aug 2021 11:44:02 +0900 [thread overview]
Message-ID: <20210812024403.765819-9-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20210812024403.765819-1-damien.lemoal@wdc.com>
Print a list of features supported by a drive when it is configured in
ata_dev_configure() using the new function ata_dev_print_features().
The features printed are not already advertized and are: trusted
send-recev support, device attention support, device sleep support,
NCQ send-recv support and NCQ priority support.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/libata-core.c | 17 +++++++++++++++++
include/linux/libata.h | 4 ++++
2 files changed, 21 insertions(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bad577dbbc0d..68a55d3e977a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2433,6 +2433,20 @@ static void ata_dev_config_devslp(struct ata_device *dev)
}
}
+static void ata_dev_print_features(struct ata_device *dev)
+{
+ if (!(dev->flags & ATA_DFLAG_FEATURES_MASK))
+ return;
+
+ ata_dev_info(dev,
+ "Features:%s%s%s%s%s\n",
+ dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "",
+ dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "",
+ dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "",
+ dev->flags & ATA_DFLAG_NCQ_SEND_RECV ? " NCQ-sndrcv" : "",
+ dev->flags & ATA_DFLAG_NCQ_PRIO ? " NCQ-prio" : "");
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2595,6 +2609,9 @@ int ata_dev_configure(struct ata_device *dev)
ata_dev_config_zac(dev);
ata_dev_config_trusted(dev);
dev->cdb_len = 32;
+
+ if (ata_msg_drv(ap) && print_info)
+ ata_dev_print_features(dev);
}
/* ATAPI-specific feature tests */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3fcd24236793..b23f28cfc8e0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -161,6 +161,10 @@ enum {
ATA_DFLAG_D_SENSE = (1 << 29), /* Descriptor sense requested */
ATA_DFLAG_ZAC = (1 << 30), /* ZAC device */
+ ATA_DFLAG_FEATURES_MASK = ATA_DFLAG_TRUSTED | ATA_DFLAG_DA | \
+ ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \
+ ATA_DFLAG_NCQ_PRIO,
+
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */
--
2.31.1
next prev parent reply other threads:[~2021-08-12 2:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 2:43 [PATCH v6 0/9] libata cleanups and improvements Damien Le Moal
2021-08-12 2:43 ` [PATCH v6 1/9] libata: fix ata_host_alloc_pinfo() Damien Le Moal
2021-08-12 2:43 ` [PATCH v6 2/9] libata: fix ata_host_start() Damien Le Moal
2021-08-12 2:43 ` [PATCH v6 3/9] libata: simplify ata_scsi_rbuf_fill() Damien Le Moal
2021-08-12 2:43 ` [PATCH v6 4/9] libata: cleanup device sleep capability detection Damien Le Moal
2021-08-12 2:43 ` [PATCH v6 5/9] libata: cleanup ata_dev_configure() Damien Le Moal
2021-08-12 2:44 ` [PATCH v6 6/9] libata: cleanup NCQ priority handling Damien Le Moal
2021-08-12 2:44 ` [PATCH v6 7/9] libata: fix ata_read_log_page() warning Damien Le Moal
2021-08-12 2:44 ` Damien Le Moal [this message]
2021-08-12 2:44 ` [PATCH v6 9/9] libata: Introduce ncq_prio_supported sysfs sttribute Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210812024403.765819-9-damien.lemoal@wdc.com \
--to=damien.lemoal@wdc.com \
--cc=axboe@kernel.dk \
--cc=linux-block@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).