From: "Reimar Döffinger" <Reimar.Doeffinger@gmx.de>
To: Damien Le Moal <Damien.LeMoal@wdc.com>,
linux-ide@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
hch@infradead.org
Subject: [PATCH] libata: fix setting and checking of DMA state.
Date: Tue, 17 Aug 2021 21:03:07 +0200 [thread overview]
Message-ID: <20210817190308.29065-1-Reimar.Doeffinger@gmx.de> (raw)
In-Reply-To: <YRv5cafgitLlfiCs@reimardoeffinger.de>
Checking if DMA is enabled should be done via the
ata_dma_enabled helper function.
Update dma_mode initialization so that SATA devices
are reported as DMA enabled.
---
drivers/ata/libata-core.c | 4 ++--
include/linux/ata.h | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9934f6c465f4..a5fe20bb22d6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2004,7 +2004,7 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
retry:
ata_tf_init(dev, &tf);
- if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+ if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&
!(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
@@ -2824,7 +2824,7 @@ int ata_bus_probe(struct ata_port *ap)
* bus as we may be talking too fast.
*/
dev->pio_mode = XFER_PIO_0;
- dev->dma_mode = 0xff;
+ dev->dma_mode = ap->flags & ATA_FLAG_SATA ? XFER_SATA : 0xff;
/* If the controller has a pio mode setup function
* then use it to set the chipset to rights. Don't
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1b44f40c7700..7bb2c2acbc42 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -374,6 +374,7 @@ enum {
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
+ XFER_SATA = 0x48,
XFER_UDMA_7 = 0x47,
XFER_UDMA_6 = 0x46,
XFER_UDMA_5 = 0x45,
--
2.32.0
next prev parent reply other threads:[~2021-08-17 19:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-14 13:47 [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG Reimar Döffinger
2021-08-15 8:18 ` Christoph Hellwig
2021-08-15 16:27 ` [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases Reimar Döffinger
2021-08-16 0:10 ` Damien Le Moal
2021-08-16 17:15 ` Reimar Döffinger
2021-08-17 19:06 ` Reimar Döffinger
2021-08-18 22:49 ` Damien Le Moal
2021-08-16 17:26 ` Reimar Döffinger
2021-08-17 7:45 ` Damien Le Moal
2021-08-17 18:01 ` Reimar Döffinger
2021-08-17 19:03 ` Reimar Döffinger [this message]
2021-08-18 23:30 ` [PATCH] libata: fix setting and checking of DMA state Damien Le Moal
2021-08-19 8:13 ` [PATCH] libata: fix " Reimar Döffinger
2021-08-19 12:56 ` Reimar Döffinger
2021-09-27 8:56 ` Paul Menzel
2021-09-27 9:10 ` Reimar Döffinger
2021-09-27 9:15 ` Damien Le Moal
2021-10-03 13:28 ` [PATCH v4] Fixes to DMA state check Reimar Döffinger
2021-10-03 13:28 ` [PATCH 1/6] libata: fix checking of DMA state Reimar Döffinger
2021-10-03 13:28 ` [PATCH 2/6] libata-scsi: " Reimar Döffinger
2021-10-03 13:28 ` [PATCH 3/6] pata_ali: " Reimar Döffinger
2021-10-03 13:28 ` [PATCH 4/6] pata_amd: " Reimar Döffinger
2021-10-03 13:28 ` [PATCH 5/6] pata_optidma: " Reimar Döffinger
2021-10-03 13:28 ` [PATCH 6/6] pata_radisys: " Reimar Döffinger
2021-10-12 2:20 ` [PATCH v4] Fixes to DMA state check Damien Le Moal
2021-10-12 6:30 ` Reimar Döffinger
[not found] ` <605EE991-5DA2-4A8D-9691-967D68D3AB51@gmx.de>
2021-10-12 6:32 ` Damien Le Moal
2021-10-12 6:33 ` Damien Le Moal
2021-08-15 16:34 ` [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG Reimar Döffinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210817190308.29065-1-Reimar.Doeffinger@gmx.de \
--to=reimar.doeffinger@gmx.de \
--cc=Damien.LeMoal@wdc.com \
--cc=axboe@kernel.dk \
--cc=hch@infradead.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).