* [PATCH 0/2] add support to STM ISM330DHCX 6-axis Mems sensor @ 2019-08-05 10:18 Lorenzo Bianconi 2019-08-05 10:18 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX Lorenzo Bianconi 2019-08-05 10:18 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Lorenzo Bianconi 0 siblings, 2 replies; 5+ messages in thread From: Lorenzo Bianconi @ 2019-08-05 10:18 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Add support to STM ISM330DHCX 6-axis sensor https://www.st.com/resource/en/datasheet/ism330dhcx.pdf This series is based on '[v2,0/4] st_lsm6dsx: move {odr,fs}_table in' https://patchwork.kernel.org/cover/11064381/ Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: add support to ISM330DHCX dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 7 ++++--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 7 files changed, 23 insertions(+), 5 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX 2019-08-05 10:18 [PATCH 0/2] add support to STM ISM330DHCX 6-axis Mems sensor Lorenzo Bianconi @ 2019-08-05 10:18 ` Lorenzo Bianconi 2019-08-05 14:23 ` Jonathan Cameron 2019-08-05 10:18 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Lorenzo Bianconi 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2019-08-05 10:18 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Add support to STM ISM330DHCX 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/ism330dhcx.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 7 ++++--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 6cbf65a7e11e..939058b27746 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -11,7 +11,8 @@ config IIO_ST_LSM6DSX help Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, - ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c + ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, + ism330dhcx To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 5090f1b3525a..4d47ba36de84 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -23,6 +23,7 @@ #define ST_LSM6DSOX_DEV_NAME "lsm6dsox" #define ST_LSM6DSR_DEV_NAME "lsm6dsr" #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" +#define ST_ISM330DHCX_DEV_NAME "ism330dhcx" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -35,6 +36,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DSOX_ID, ST_LSM6DSR_ID, ST_LSM6DS3TRC_ID, + ST_ISM330DHCX_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 1be1cec2ab23..2c03a5b80f80 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -14,9 +14,10 @@ * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the * value of the decimation factor and ODR set for each FIFO data set. * - * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR: The FIFO buffer can be configured to - * store data from gyroscope and accelerometer. Each sample is queued with - * a tag (1B) indicating data source (gyroscope, accelerometer, hw timer). + * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be + * configured to store data from gyroscope and accelerometer. Each sample + * is queued with a tag (1B) indicating data source (gyroscope, accelerometer, + * hw timer). * * FIFO supported modes: * - BYPASS: FIFO disabled diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index fc4d18b58c97..85824d6739ee 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -24,7 +24,7 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 4KB * - * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR + * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 @@ -645,6 +645,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { { .hw_id = ST_LSM6DSR_ID, .name = ST_LSM6DSR_DEV_NAME, + }, { + .hw_id = ST_ISM330DHCX_ID, + .name = ST_ISM330DHCX_DEV_NAME, }, }, .channels = { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 28581eb0532c..15c6aa5b6caa 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm6ds3tr-c", .data = (void *)ST_LSM6DS3TRC_ID, }, + { + .compatible = "st,ism330dhcx", + .data = (void *)ST_ISM330DHCX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -94,6 +98,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, + { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 0371e8b94a3e..a8430ee11310 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm6ds3tr-c", .data = (void *)ST_LSM6DS3TRC_ID, }, + { + .compatible = "st,ism330dhcx", + .data = (void *)ST_ISM330DHCX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -94,6 +98,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, + { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- 2.21.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX 2019-08-05 10:18 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX Lorenzo Bianconi @ 2019-08-05 14:23 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2019-08-05 14:23 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, devicetree On Mon, 5 Aug 2019 12:18:43 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Add support to STM ISM330DHCX 6-axis (acc + gyro) Mems sensor > https://www.st.com/resource/en/datasheet/ism330dhcx.pdf > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Given these are exceptionally straight forward and I'm hoovering up the outstanding patches on this driver today, I'll be cheeky and not let them sit on the mailing list before applying. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to do their usual sanity check. Thanks, Jonathan > --- > drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 7 ++++--- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > 6 files changed, 22 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 6cbf65a7e11e..939058b27746 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -11,7 +11,8 @@ config IIO_ST_LSM6DSX > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > - ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c > + ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, > + ism330dhcx > > To compile this driver as a module, choose M here: the module > will be called st_lsm6dsx. > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index 5090f1b3525a..4d47ba36de84 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -23,6 +23,7 @@ > #define ST_LSM6DSOX_DEV_NAME "lsm6dsox" > #define ST_LSM6DSR_DEV_NAME "lsm6dsr" > #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" > +#define ST_ISM330DHCX_DEV_NAME "ism330dhcx" > > enum st_lsm6dsx_hw_id { > ST_LSM6DS3_ID, > @@ -35,6 +36,7 @@ enum st_lsm6dsx_hw_id { > ST_LSM6DSOX_ID, > ST_LSM6DSR_ID, > ST_LSM6DS3TRC_ID, > + ST_ISM330DHCX_ID, > ST_LSM6DSX_MAX_ID, > }; > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > index 1be1cec2ab23..2c03a5b80f80 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > @@ -14,9 +14,10 @@ > * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the > * value of the decimation factor and ODR set for each FIFO data set. > * > - * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR: The FIFO buffer can be configured to > - * store data from gyroscope and accelerometer. Each sample is queued with > - * a tag (1B) indicating data source (gyroscope, accelerometer, hw timer). > + * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be > + * configured to store data from gyroscope and accelerometer. Each sample > + * is queued with a tag (1B) indicating data source (gyroscope, accelerometer, > + * hw timer). > * > * FIFO supported modes: > * - BYPASS: FIFO disabled > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > index fc4d18b58c97..85824d6739ee 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -24,7 +24,7 @@ > * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > * - FIFO size: 4KB > * > - * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR > + * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: > * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 > * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 > * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > @@ -645,6 +645,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > { > .hw_id = ST_LSM6DSR_ID, > .name = ST_LSM6DSR_DEV_NAME, > + }, { > + .hw_id = ST_ISM330DHCX_ID, > + .name = ST_ISM330DHCX_DEV_NAME, > }, > }, > .channels = { > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > index 28581eb0532c..15c6aa5b6caa 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { > .compatible = "st,lsm6ds3tr-c", > .data = (void *)ST_LSM6DS3TRC_ID, > }, > + { > + .compatible = "st,ism330dhcx", > + .data = (void *)ST_ISM330DHCX_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); > @@ -94,6 +98,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { > { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, > { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, > + { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > index 0371e8b94a3e..a8430ee11310 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > @@ -79,6 +79,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { > .compatible = "st,lsm6ds3tr-c", > .data = (void *)ST_LSM6DS3TRC_ID, > }, > + { > + .compatible = "st,ism330dhcx", > + .data = (void *)ST_ISM330DHCX_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); > @@ -94,6 +98,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { > { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, > { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, > + { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, > {}, > }; > MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings 2019-08-05 10:18 [PATCH 0/2] add support to STM ISM330DHCX 6-axis Mems sensor Lorenzo Bianconi 2019-08-05 10:18 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX Lorenzo Bianconi @ 2019-08-05 10:18 ` Lorenzo Bianconi 2019-08-05 14:24 ` Jonathan Cameron 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2019-08-05 10:18 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 92b48f242356..87407d110bb7 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -12,6 +12,7 @@ Required properties: "st,lsm6dsox" "st,lsm6dsr" "st,lsm6ds3tr-c" + "st,ism330dhcx" - reg: i2c address of the sensor / spi cs line Optional properties: -- 2.21.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings 2019-08-05 10:18 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Lorenzo Bianconi @ 2019-08-05 14:24 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2019-08-05 14:24 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, devicetree On Mon, 5 Aug 2019 12:18:44 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Applied, Thanks, Jonathan > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index 92b48f242356..87407d110bb7 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -12,6 +12,7 @@ Required properties: > "st,lsm6dsox" > "st,lsm6dsr" > "st,lsm6ds3tr-c" > + "st,ism330dhcx" > - reg: i2c address of the sensor / spi cs line > > Optional properties: ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-08-05 14:24 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-08-05 10:18 [PATCH 0/2] add support to STM ISM330DHCX 6-axis Mems sensor Lorenzo Bianconi 2019-08-05 10:18 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX Lorenzo Bianconi 2019-08-05 14:23 ` Jonathan Cameron 2019-08-05 10:18 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Lorenzo Bianconi 2019-08-05 14:24 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).