* [PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples
@ 2019-09-10 14:43 Stefan Popa
2019-09-15 13:27 ` Jonathan Cameron
0 siblings, 1 reply; 3+ messages in thread
From: Stefan Popa @ 2019-09-10 14:43 UTC (permalink / raw)
To: jic23
Cc: Michael.Hennerich, knaack.h, lars, pmeerw, linux-kernel,
linux-iio, stefan.popa
Currently, the driver sets the FIFO_SAMPLES register with the number of
sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
single axis). However, the FIFO_SAMPLES register should store the number
of samples, regardless of how the FIFO format is configured.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
Changes in v2:
- st->watermark needs to store the number of sample sets,
the total number of samples is computed in
adxl372_configure_fifo() func.
drivers/iio/accel/adxl372.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 055227cb..7de5e1b 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st)
if (ret < 0)
return ret;
- fifo_samples = st->watermark & 0xFF;
+ /*
+ * watermak stores the number of sets; we need to write the FIFO
+ * registers with the number of samples
+ */
+ fifo_samples = (st->watermark * st->fifo_set_size);
fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
- ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
+ ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
- ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples);
+ ret = regmap_write(st->regmap,
+ ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
if (ret < 0)
return ret;
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples
2019-09-10 14:43 [PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples Stefan Popa
@ 2019-09-15 13:27 ` Jonathan Cameron
2019-09-17 12:41 ` Popa, Stefan Serban
0 siblings, 1 reply; 3+ messages in thread
From: Jonathan Cameron @ 2019-09-15 13:27 UTC (permalink / raw)
To: Stefan Popa
Cc: Michael.Hennerich, knaack.h, lars, pmeerw, linux-kernel, linux-iio
On Tue, 10 Sep 2019 17:43:32 +0300
Stefan Popa <stefan.popa@analog.com> wrote:
> Currently, the driver sets the FIFO_SAMPLES register with the number of
> sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
> single axis). However, the FIFO_SAMPLES register should store the number
> of samples, regardless of how the FIFO format is configured.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes tags? I think it's
Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
Check I got that right though.
One trivial inline that I have tidied up whilst applying.
Applied to the fixes-togreg branch of iio.git.
Thanks,
Jonathan
> ---
> Changes in v2:
> - st->watermark needs to store the number of sample sets,
> the total number of samples is computed in
> adxl372_configure_fifo() func.
>
> drivers/iio/accel/adxl372.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
> index 055227cb..7de5e1b 100644
> --- a/drivers/iio/accel/adxl372.c
> +++ b/drivers/iio/accel/adxl372.c
> @@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st)
> if (ret < 0)
> return ret;
>
> - fifo_samples = st->watermark & 0xFF;
> + /*
> + * watermak stores the number of sets; we need to write the FIFO
watermark
> + * registers with the number of samples
> + */
> + fifo_samples = (st->watermark * st->fifo_set_size);
> fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
> ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
> - ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
> + ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
>
> - ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples);
> + ret = regmap_write(st->regmap,
> + ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
> if (ret < 0)
> return ret;
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples
2019-09-15 13:27 ` Jonathan Cameron
@ 2019-09-17 12:41 ` Popa, Stefan Serban
0 siblings, 0 replies; 3+ messages in thread
From: Popa, Stefan Serban @ 2019-09-17 12:41 UTC (permalink / raw)
To: jic23; +Cc: knaack.h, lars, pmeerw, Hennerich, Michael, linux-iio, linux-kernel
On Du, 2019-09-15 at 14:27 +0100, Jonathan Cameron wrote:
>
>
>
> On Tue, 10 Sep 2019 17:43:32 +0300
> Stefan Popa <stefan.popa@analog.com> wrote:
>
> >
> >
> >
> >
> > Currently, the driver sets the FIFO_SAMPLES register with the number of
> > sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
> > single axis). However, the FIFO_SAMPLES register should store the
> > number
> > of samples, regardless of how the FIFO format is configured.
> >
> > Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Hi Jonathan,
>
>
>
> Fixes tags? I think it's
> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
>
> Check I got that right though.
Yes, that's right! Thank you!
-Stefan
>
>
>
>
> One trivial inline that I have tidied up whilst applying.
>
> Applied to the fixes-togreg branch of iio.git.
>
> Thanks,
>
> Jonathan
>
>
> >
> >
> >
> >
> > ---
> > Changes in v2:
> > - st->watermark needs to store the number of sample sets,
> > the total number of samples is computed in
> > adxl372_configure_fifo() func.
> >
> > drivers/iio/accel/adxl372.c | 11 ++++++++---
> > 1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
> > index 055227cb..7de5e1b 100644
> > --- a/drivers/iio/accel/adxl372.c
> > +++ b/drivers/iio/accel/adxl372.c
> > @@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct
> > adxl372_state *st)
> > if (ret < 0)
> > return ret;
> >
> > - fifo_samples = st->watermark & 0xFF;
> > + /*
> > + * watermak stores the number of sets; we need to write the
> > FIFO
> watermark
>
> >
> >
> >
> >
> > + * registers with the number of samples
> > + */
> > + fifo_samples = (st->watermark * st->fifo_set_size);
> > fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
> > ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
> > - ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
> > + ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
> >
> > - ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES,
> > fifo_samples);
> > + ret = regmap_write(st->regmap,
> > + ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
> > if (ret < 0)
> > return ret;
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-17 12:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 14:43 [PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples Stefan Popa
2019-09-15 13:27 ` Jonathan Cameron
2019-09-17 12:41 ` Popa, Stefan Serban
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).