* [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21
@ 2018-12-12 18:32 Jonathan Cameron
2018-12-13 12:38 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2018-12-12 18:32 UTC (permalink / raw)
To: gregkh; +Cc: linux-iio
The following changes since commit 16c44c57ecd89402a1acc81617cff463ff446fe7:
staging: vboxvideo: Rename uint32_t type to u32 (2018-11-23 10:58:47 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.21b
for you to fetch changes up to db23d88756abd38e0995ea8449d0025b3de4b26b:
iio: adc: qcom-spmi-adc5: Initialize prescale properly (2018-12-12 17:45:30 +0000)
----------------------------------------------------------------
Second set of IIO new device support, features and cleanups for the 4.21 cycle.
Staging graduation
* ad2s90
- Driver for this resolver to digital chip.
New drivers and device support.
* ad5686
- Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
- Support for S5PV210 which is slightly different from other parts.
* mcp41010
- Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
MCP42100 microchip potentiometers.
New ACPI ids.
* ak8975
- AKM9911 ACPI HID.
* kxcjk-1013
- KXJ2109 ACPI HID.
- KIOX010A ACPI HID.
New features
* ad5933
- Explicit DT binding.
* ad2s90
- Explicit DT binding including dropping spi setup that is done via dt
in favour of verifying the settings form DT.
* adt7316
- Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
- Runtime power management.
Minor fixes and cleanups
* core
- Protect against missing info structure.
* ad2s90
- SPDX
- Add documentation fo the mutex.
* ad7280a
- Check allocation failure.
- Fix an accidental replacement of an error return.
* adt7316
- Switch some variables to be local and rename for consistency with other
drivers.
- Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
- Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
- White space cleanup.
* hts221
- MAINTAINERS entry.
* lis302
- Use generic name in the DT binding doc.
* Messon-saradc
- Check for allocation error.
- Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
- A fix for initialization of the prescale property. Came late in the
cycle, so merge window is probably the best route for this.
* st_lsm6dsx
- Allow for variable read length to support wider range of slave devices.
----------------------------------------------------------------
Alexandru Ardelean (1):
staging:iio:ad2s90: Add max frequency check at probe
Andi Shyti (1):
iio: core: check 'info' value before registering the device
Chris Coffey (2):
dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
Colin Ian King (1):
iio: hid-sensor-hub: clean up indentation, remove extraneous tab
Evan Green (1):
iio: adc: qcom-spmi-adc5: Initialize prescale properly
Fabrice Gasnier (3):
iio: adc: stm32-adc: move self-calibration to prepare routine
iio: adc: stm32-adc: add power management support
iio: adc: stm32-adc: switch off running adc when going to low power
Hans de Goede (1):
iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID
Jeremy Fertic (1):
Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
Jonathan Bakker (3):
iio: adc: exynos-adc: Add S5PV210 variant
iio: adc: Allow selection of Exynos ADC on S5PV210
dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
iio: humidity: hts221: add entry in MAINTAINERS file
Lubomir Rintel (1):
dt-bindings: iio: accel: use a generic node name for lis302
Marcelo Schmitt (1):
staging: iio: ad5933: add device tree support
Martin Blumenstingl (1):
iio: adc: meson-saradc: fix internal clock names
Martin Kelly (1):
iio: bmi160: use all devm functions in probe
Matheus Tavares (5):
staging:iio:ad2s90: Add device tree support
staging:iio:ad2s90: Remove spi setup that should be done via dt
dt-bindings:iio:resolver: Add docs for ad2s90
staging:iio:ad2s90: Replace license text w/ SPDX identifier
staging:iio:ad2s90: Move out of staging
Mircea Caprioru (1):
iio: dac: ad5686: fix bit shift read register
Nicholas Mc Guire (2):
iio: adc: meson-saradc: check for devm_kasprintf failure
staging: iio: adc: ad7280a: check for devm_kasprint() failure
Shreeya Patel (4):
Staging: iio: adt7316: Add of_device_id table
Staging: iio: adt7316: Use device tree data to set ldac_pin
Staging: iio: adt7316: Switch irq_flags to a local variable
Staging: iio: adt7316: Change the name from irq_flags to irq_type
Slawomir Stepien (1):
staging: iio: adc: ad7280a: fix overwrite of the returned value
Stefan Popa (1):
iio:dac:ad5686: Add AD5310R support
Stephan Gerhold (2):
iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID
iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
Victor Colombo (1):
staging:iio:ad2s90: Add comment to device state mutex
.../devicetree/bindings/iio/accel/lis302.txt | 4 +-
.../bindings/iio/adc/samsung,exynos-adc.txt | 4 +-
.../bindings/iio/potentiometer/mcp41010.txt | 28 ++
.../devicetree/bindings/iio/resolver/ad2s90.txt | 31 +++
MAINTAINERS | 8 +
drivers/iio/accel/kxcjk-1013.c | 2 +
drivers/iio/adc/Kconfig | 2 +-
drivers/iio/adc/exynos_adc.c | 14 +
drivers/iio/adc/meson_saradc.c | 14 +-
drivers/iio/adc/qcom-spmi-adc5.c | 58 ++--
drivers/iio/adc/stm32-adc-core.c | 182 +++++++++----
drivers/iio/adc/stm32-adc.c | 303 +++++++++++++++------
.../iio/common/hid-sensors/hid-sensor-attributes.c | 2 +-
drivers/iio/dac/ad5686-spi.c | 21 +-
drivers/iio/dac/ad5686.c | 19 +-
drivers/iio/dac/ad5686.h | 7 +
drivers/iio/imu/bmi160/bmi160.h | 1 -
drivers/iio/imu/bmi160/bmi160_core.c | 38 +--
drivers/iio/imu/bmi160/bmi160_i2c.c | 8 -
drivers/iio/imu/bmi160/bmi160_spi.c | 8 -
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 14 +-
drivers/iio/industrialio-core.c | 3 +
drivers/iio/magnetometer/ak8975.c | 1 +
drivers/iio/potentiometer/Kconfig | 12 +
drivers/iio/potentiometer/Makefile | 1 +
drivers/iio/potentiometer/mcp41010.c | 203 ++++++++++++++
drivers/iio/resolver/Kconfig | 10 +
drivers/iio/resolver/Makefile | 1 +
drivers/{staging => }/iio/resolver/ad2s90.c | 38 +--
drivers/staging/iio/adc/ad7280a.c | 51 ++--
drivers/staging/iio/addac/adt7316-i2c.c | 18 +-
drivers/staging/iio/addac/adt7316-spi.c | 1 -
drivers/staging/iio/addac/adt7316.c | 22 +-
drivers/staging/iio/addac/adt7316.h | 1 -
drivers/staging/iio/impedance-analyzer/ad5933.c | 9 +
drivers/staging/iio/resolver/Kconfig | 10 -
drivers/staging/iio/resolver/Makefile | 1 -
37 files changed, 852 insertions(+), 298 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
create mode 100644 Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
create mode 100644 drivers/iio/potentiometer/mcp41010.c
rename drivers/{staging => }/iio/resolver/ad2s90.c (79%)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21
2018-12-12 18:32 [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21 Jonathan Cameron
@ 2018-12-13 12:38 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2018-12-13 12:38 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Wed, Dec 12, 2018 at 06:32:42PM +0000, Jonathan Cameron wrote:
> The following changes since commit 16c44c57ecd89402a1acc81617cff463ff446fe7:
>
> staging: vboxvideo: Rename uint32_t type to u32 (2018-11-23 10:58:47 +0100)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.21b
Now pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-12-13 12:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-12 18:32 [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21 Jonathan Cameron
2018-12-13 12:38 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).