From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Rui Miguel Silva <rui.silva@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Fabio Estevam <fabio.estevam@nxp.com>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 3/5] iio: gyro: fxas2100x: add i2c driver
Date: Wed, 6 Feb 2019 13:19:51 +0000 [thread overview]
Message-ID: <20190206131951.0000212c@huawei.com> (raw)
In-Reply-To: <20190205174333.17672-4-rui.silva@linaro.org>
On Tue, 5 Feb 2019 17:43:31 +0000
Rui Miguel Silva <rui.silva@linaro.org> wrote:
> This add the real driver to talk over i2c and use the fxas2100x core
> for the main tasks.
>
> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Trivial comments inline.
> ---
> drivers/iio/gyro/Kconfig | 6 +++
> drivers/iio/gyro/Makefile | 1 +
> drivers/iio/gyro/fxas2100x_i2c.c | 73 ++++++++++++++++++++++++++++++++
> 3 files changed, 80 insertions(+)
> create mode 100644 drivers/iio/gyro/fxas2100x_i2c.c
>
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index c168aa63de3b..1f9bfc51febb 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -77,6 +77,8 @@ config FXAS2100X
> tristate "NXP FXAS2100X Gyro Sensor"
> select IIO_BUFFER
> select IIO_TRIGGERED_BUFFER
> + select FXAS2100X_I2C if (I2C)
> + depends on (I2C || SPI_MASTER)
Bit illogical to do the SPI_MASTER case in this patch.
> help
> Say yes here to build support for NXP FXAS2100X family Tri-axis Gyro
> Sensor driver connected via I2C or SPI.
> @@ -84,6 +86,10 @@ config FXAS2100X
> This driver can also be built as a module. If so, the module
> will be called fxas2100x_i2c or fxas2100x_spi.
>
> +config FXAS2100X_I2C
> + tristate
> + select REGMAP_I2C
> +
> config HID_SENSOR_GYRO_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> index 9e2395185a6e..8b1540ddbbce 100644
> --- a/drivers/iio/gyro/Makefile
> +++ b/drivers/iio/gyro/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_BMG160) += bmg160_core.o
> obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
> obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
> obj-$(CONFIG_FXAS2100X) += fxas2100x_core.o
> +obj-$(CONFIG_FXAS2100X_I2C) += fxas2100x_i2c.o
>
> obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
>
> diff --git a/drivers/iio/gyro/fxas2100x_i2c.c b/drivers/iio/gyro/fxas2100x_i2c.c
> new file mode 100644
> index 000000000000..b8f6d2b7f6dd
> --- /dev/null
> +++ b/drivers/iio/gyro/fxas2100x_i2c.c
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for NXP FXAS2100x Gyroscope - I2C
> + *
> + * Copyright (C) 2018 Linaro Ltd.
> + *
No need for blank line.
> + */
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "fxas2100x.h"
> +
> +static const struct regmap_config fxas2100x_regmap_i2c_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = FXAS2100X_REG_CTRL3,
> +};
> +
> +static int fxas2100x_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct regmap *regmap;
> + const char *name = NULL;
> +
> + regmap = devm_regmap_init_i2c(i2c, &fxas2100x_regmap_i2c_conf);
> + if (IS_ERR(regmap)) {
> + dev_err(&i2c->dev, "Failed to register i2c regmap: %ld\n",
> + PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + if (id)
> + name = id->name;
> +
> + return fxas2100x_core_probe(&i2c->dev, regmap, i2c->irq, name);
> +}
> +
> +static int fxas2100x_i2c_remove(struct i2c_client *i2c)
> +{
> + fxas2100x_core_remove(&i2c->dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id fxas2100x_i2c_id[] = {
> + { "fxas2100x", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, fxas2100x_i2c_id);
> +
> +static const struct of_device_id fxas2100x_i2c_of_match[] = {
> + { .compatible = "nxp,fxas21002", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, fxas2100x_i2c_of_match);
> +
> +static struct i2c_driver fxas2100x_i2c_driver = {
> + .driver = {
> + .name = "fxas2100x_i2c",
> + .pm = &fxas2100x_pm_ops,
> + .of_match_table = of_match_ptr(fxas2100x_i2c_of_match),
> + },
> + .probe = fxas2100x_i2c_probe,
> + .remove = fxas2100x_i2c_remove,
> + .id_table = fxas2100x_i2c_id,
> +};
> +module_i2c_driver(fxas2100x_i2c_driver);
> +
> +MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("FXAS2100X I2C Gyro driver");
next prev parent reply other threads:[~2019-02-06 13:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 17:43 [PATCH v2 0/5] iio: gyro: add fxas2100x driver Rui Miguel Silva
2019-02-05 17:43 ` [PATCH v2 1/5] iio: gyro: add DT bindings to fxas21002 Rui Miguel Silva
2019-02-06 12:53 ` Jonathan Cameron
2019-02-18 19:39 ` Rob Herring
2019-02-05 17:43 ` [PATCH v2 2/5] iio: gyro: fxas2100x: add core driver for fxas2100x gyroscope Rui Miguel Silva
2019-02-06 13:18 ` Jonathan Cameron
2019-02-07 15:32 ` Rui Miguel Silva
2019-02-05 17:43 ` [PATCH v2 3/5] iio: gyro: fxas2100x: add i2c driver Rui Miguel Silva
2019-02-06 13:19 ` Jonathan Cameron [this message]
2019-02-05 17:43 ` [PATCH v2 4/5] iio: gyro: fxas2100x: add spi driver Rui Miguel Silva
2019-02-05 17:43 ` [PATCH v2 5/5] ARM: dts: imx7s-warp: add fxas21002 gyroscope Rui Miguel Silva
2019-02-09 16:14 ` [PATCH v2 0/5] iio: gyro: add fxas2100x driver Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190206131951.0000212c@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=rui.silva@linaro.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).