[PATCH] staging: iio: ad5933: move out of staging

* [PATCH] staging: iio: ad5933: move out of staging
@ 2019-02-11 15:43 Marcelo Schmitt
  2019-02-11 15:54 ` Hennerich, Michael
  2019-02-11 20:44 ` Jonathan Cameron
  0 siblings, 2 replies; 4+ messages in thread
From: Marcelo Schmitt @ 2019-02-11 15:43 UTC (permalink / raw)
  To: lars, Michael.Hennerich, jic23, knaack.h, pmeerw
  Cc: linux-iio, linux-kernel, kernel-usp

Move ad5933 impedance-analyzer driver from staging to mainline.

The ad5933 is a high precision impedance converter system
solution that combines an on-board frequency generator with an
analog-to-digital converter (ADC). This driver was designed to be
compatible with both ad5933 and ad5934 chips.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
---
 drivers/iio/impedance-analyzer/Kconfig        |  18 +
 drivers/iio/impedance-analyzer/Makefile       |   5 +
 drivers/iio/impedance-analyzer/ad5933.c       | 810 ++++++++++++++++++
 .../staging/iio/impedance-analyzer/Kconfig    |  18 -
 .../staging/iio/impedance-analyzer/Makefile   |   5 -
 .../staging/iio/impedance-analyzer/ad5933.c   | 809 -----------------
 6 files changed, 833 insertions(+), 832 deletions(-)
 create mode 100644 drivers/iio/impedance-analyzer/Kconfig
 create mode 100644 drivers/iio/impedance-analyzer/Makefile
 create mode 100644 drivers/iio/impedance-analyzer/ad5933.c
 delete mode 100644 drivers/staging/iio/impedance-analyzer/Kconfig
 delete mode 100644 drivers/staging/iio/impedance-analyzer/Makefile
 delete mode 100644 drivers/staging/iio/impedance-analyzer/ad5933.c

diff --git a/drivers/iio/impedance-analyzer/Kconfig b/drivers/iio/impedance-analyzer/Kconfig
new file mode 100644
index 000000000000..dd97b6bb3fd0
--- /dev/null
+++ b/drivers/iio/impedance-analyzer/Kconfig
@@ -0,0 +1,18 @@
+#
+# Impedance Converter, Network Analyzer drivers
+#
+menu "Network Analyzer, Impedance Converters"
+
+config AD5933
+	tristate "Analog Devices AD5933, AD5934 driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say yes here to build support for Analog Devices Impedance Converter,
+	  Network Analyzer, AD5933/4, provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5933.
+
+endmenu
diff --git a/drivers/iio/impedance-analyzer/Makefile b/drivers/iio/impedance-analyzer/Makefile
new file mode 100644
index 000000000000..7604d786583e
--- /dev/null
+++ b/drivers/iio/impedance-analyzer/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Impedance Converter, Network Analyzer drivers
+#
+
+obj-$(CONFIG_AD5933) += ad5933.o
diff --git a/drivers/iio/impedance-analyzer/ad5933.c b/drivers/iio/impedance-analyzer/ad5933.c
new file mode 100644
index 000000000000..839bc30682e4
--- /dev/null
+++ b/drivers/iio/impedance-analyzer/ad5933.c
@@ -0,0 +1,810 @@
+/*
+ * AD5933 AD5934 Impedance Converter, Network Analyzer
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/regulator/consumer.h>
+
+/* AD5933/AD5934 Registers */
+#define AD5933_REG_CONTROL_HB		0x80	/* R/W, 1 byte */
+#define AD5933_REG_CONTROL_LB		0x81	/* R/W, 1 byte */
+#define AD5933_REG_FREQ_START		0x82	/* R/W, 3 bytes */
+#define AD5933_REG_FREQ_INC		0x85	/* R/W, 3 bytes */
+#define AD5933_REG_INC_NUM		0x88	/* R/W, 2 bytes, 9 bit */
+#define AD5933_REG_SETTLING_CYCLES	0x8A	/* R/W, 2 bytes */
+#define AD5933_REG_STATUS		0x8F	/* R, 1 byte */
+#define AD5933_REG_TEMP_DATA		0x92	/* R, 2 bytes*/
+#define AD5933_REG_REAL_DATA		0x94	/* R, 2 bytes*/
+#define AD5933_REG_IMAG_DATA		0x96	/* R, 2 bytes*/
+
+/* AD5933_REG_CONTROL_HB Bits */
+#define AD5933_CTRL_INIT_START_FREQ	(0x1 << 4)
+#define AD5933_CTRL_START_SWEEP		(0x2 << 4)
+#define AD5933_CTRL_INC_FREQ		(0x3 << 4)
+#define AD5933_CTRL_REPEAT_FREQ		(0x4 << 4)
+#define AD5933_CTRL_MEASURE_TEMP	(0x9 << 4)
+#define AD5933_CTRL_POWER_DOWN		(0xA << 4)
+#define AD5933_CTRL_STANDBY		(0xB << 4)
+
+#define AD5933_CTRL_RANGE_2000mVpp	(0x0 << 1)
+#define AD5933_CTRL_RANGE_200mVpp	(0x1 << 1)
+#define AD5933_CTRL_RANGE_400mVpp	(0x2 << 1)
+#define AD5933_CTRL_RANGE_1000mVpp	(0x3 << 1)
+#define AD5933_CTRL_RANGE(x)		((x) << 1)
+
+#define AD5933_CTRL_PGA_GAIN_1		(0x1 << 0)
+#define AD5933_CTRL_PGA_GAIN_5		(0x0 << 0)
+
+/* AD5933_REG_CONTROL_LB Bits */
+#define AD5933_CTRL_RESET		(0x1 << 4)
+#define AD5933_CTRL_INT_SYSCLK		(0x0 << 3)
+#define AD5933_CTRL_EXT_SYSCLK		(0x1 << 3)
+
+/* AD5933_REG_STATUS Bits */
+#define AD5933_STAT_TEMP_VALID		(0x1 << 0)
+#define AD5933_STAT_DATA_VALID		(0x1 << 1)
+#define AD5933_STAT_SWEEP_DONE		(0x1 << 2)
+
+/* I2C Block Commands */
+#define AD5933_I2C_BLOCK_WRITE		0xA0
+#define AD5933_I2C_BLOCK_READ		0xA1
+#define AD5933_I2C_ADDR_POINTER		0xB0
+
+/* Device Specs */
+#define AD5933_INT_OSC_FREQ_Hz		16776000
+#define AD5933_MAX_OUTPUT_FREQ_Hz	100000
+#define AD5933_MAX_RETRIES		100
+
+#define AD5933_OUT_RANGE		1
+#define AD5933_OUT_RANGE_AVAIL		2
+#define AD5933_OUT_SETTLING_CYCLES	3
+#define AD5933_IN_PGA_GAIN		4
+#define AD5933_IN_PGA_GAIN_AVAIL	5
+#define AD5933_FREQ_POINTS		6
+
+#define AD5933_POLL_TIME_ms		10
+#define AD5933_INIT_EXCITATION_TIME_ms	100
+
+struct ad5933_state {
+	struct i2c_client		*client;
+	struct regulator		*reg;
+	struct clk			*mclk;
+	struct delayed_work		work;
+	struct mutex			lock; /* Protect sensor state */
+	unsigned long			mclk_hz;
+	unsigned char			ctrl_hb;
+	unsigned char			ctrl_lb;
+	unsigned int			range_avail[4];
+	unsigned short			vref_mv;
+	unsigned short			settling_cycles;
+	unsigned short			freq_points;
+	unsigned int			freq_start;
+	unsigned int			freq_inc;
+	unsigned int			state;
+	unsigned int			poll_time_jiffies;
+};
+
+#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \
+		_scan_index, _realbits) { \
+	.type = (_type), \
+	.extend_name = (_extend_name), \
+	.info_mask_separate = (_info_mask_separate), \
+	.address = (_address), \
+	.scan_index = (_scan_index), \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (_realbits), \
+		.storagebits = 16, \
+	}, \
+}
+
+static const struct iio_chan_spec ad5933_channels[] = {
+	AD5933_CHANNEL(IIO_TEMP, NULL, BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE), AD5933_REG_TEMP_DATA, -1, 14),
+	/* Ring Channels */
+	AD5933_CHANNEL(IIO_VOLTAGE, "real", 0, AD5933_REG_REAL_DATA, 0, 16),
+	AD5933_CHANNEL(IIO_VOLTAGE, "imag", 0, AD5933_REG_IMAG_DATA, 1, 16),
+};
+
+static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data)
+{
+	int ret;
+
+	while (len--) {
+		ret = i2c_smbus_write_byte_data(client, reg++, *data++);
+		if (ret < 0) {
+			dev_err(&client->dev, "I2C write error\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data)
+{
+	int ret;
+
+	while (len--) {
+		ret = i2c_smbus_read_byte_data(client, reg++);
+		if (ret < 0) {
+			dev_err(&client->dev, "I2C read error\n");
+			return ret;
+		}
+		*data++ = ret;
+	}
+	return 0;
+}
+
+static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd)
+{
+	unsigned char dat = st->ctrl_hb | cmd;
+
+	return ad5933_i2c_write(st->client,
+			AD5933_REG_CONTROL_HB, 1, &dat);
+}
+
+static int ad5933_reset(struct ad5933_state *st)
+{
+	unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET;
+
+	return ad5933_i2c_write(st->client,
+			AD5933_REG_CONTROL_LB, 1, &dat);
+}
+
+static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event)
+{
+	unsigned char val, timeout = AD5933_MAX_RETRIES;
+	int ret;
+
+	while (timeout--) {
+		ret =  ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val);
+		if (ret < 0)
+			return ret;
+		if (val & event)
+			return val;
+		cpu_relax();
+		mdelay(1);
+	}
+
+	return -EAGAIN;
+}
+
+static int ad5933_set_freq(struct ad5933_state *st,
+			   unsigned int reg, unsigned long freq)
+{
+	unsigned long long freqreg;
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} dat;
+
+	freqreg = (u64)freq * (u64)(1 << 27);
+	do_div(freqreg, st->mclk_hz / 4);
+
+	switch (reg) {
+	case AD5933_REG_FREQ_START:
+		st->freq_start = freq;
+		break;
+	case AD5933_REG_FREQ_INC:
+		st->freq_inc = freq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dat.d32 = cpu_to_be32(freqreg);
+	return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]);
+}
+
+static int ad5933_setup(struct ad5933_state *st)
+{
+	__be16 dat;
+	int ret;
+
+	ret = ad5933_reset(st);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200);
+	if (ret < 0)
+		return ret;
+
+	st->settling_cycles = 10;
+	dat = cpu_to_be16(st->settling_cycles);
+
+	ret = ad5933_i2c_write(st->client,
+			       AD5933_REG_SETTLING_CYCLES,
+			       2, (u8 *)&dat);
+	if (ret < 0)
+		return ret;
+
+	st->freq_points = 100;
+	dat = cpu_to_be16(st->freq_points);
+
+	return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat);
+}
+
+static void ad5933_calc_out_ranges(struct ad5933_state *st)
+{
+	int i;
+	unsigned int normalized_3v3[4] = {1980, 198, 383, 970};
+
+	for (i = 0; i < 4; i++)
+		st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300;
+}
+
+/*
+ * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC
+ */
+
+static ssize_t ad5933_show_frequency(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad5933_state *st = iio_priv(indio_dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	unsigned long long freqreg;
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} dat;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]);
+	iio_device_release_direct_mode(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF;
+
+	freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4);
+	do_div(freqreg, 1 << 27);
+
+	return sprintf(buf, "%d\n", (int)freqreg);
+}
+
+static ssize_t ad5933_store_frequency(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf,
+				      size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad5933_state *st = iio_priv(indio_dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > AD5933_MAX_OUTPUT_FREQ_Hz)
+		return -EINVAL;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	ret = ad5933_set_freq(st, this_attr->address, val);
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(out_voltage0_freq_start, 0644,
+			ad5933_show_frequency,
+			ad5933_store_frequency,
+			AD5933_REG_FREQ_START);
+
+static IIO_DEVICE_ATTR(out_voltage0_freq_increment, 0644,
+			ad5933_show_frequency,
+			ad5933_store_frequency,
+			AD5933_REG_FREQ_INC);
+
+static ssize_t ad5933_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad5933_state *st = iio_priv(indio_dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret = 0, len = 0;
+
+	mutex_lock(&st->lock);
+	switch ((u32)this_attr->address) {
+	case AD5933_OUT_RANGE:
+		len = sprintf(buf, "%u\n",
+			      st->range_avail[(st->ctrl_hb >> 1) & 0x3]);
+		break;
+	case AD5933_OUT_RANGE_AVAIL:
+		len = sprintf(buf, "%u %u %u %u\n", st->range_avail[0],
+			      st->range_avail[3], st->range_avail[2],
+			      st->range_avail[1]);
+		break;
+	case AD5933_OUT_SETTLING_CYCLES:
+		len = sprintf(buf, "%d\n", st->settling_cycles);
+		break;
+	case AD5933_IN_PGA_GAIN:
+		len = sprintf(buf, "%s\n",
+			      (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ?
+			      "1" : "0.2");
+		break;
+	case AD5933_IN_PGA_GAIN_AVAIL:
+		len = sprintf(buf, "1 0.2\n");
+		break;
+	case AD5933_FREQ_POINTS:
+		len = sprintf(buf, "%d\n", st->freq_points);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&st->lock);
+	return ret ? ret : len;
+}
+
+static ssize_t ad5933_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad5933_state *st = iio_priv(indio_dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	u16 val;
+	int i, ret = 0;
+	__be16 dat;
+
+	if (this_attr->address != AD5933_IN_PGA_GAIN) {
+		ret = kstrtou16(buf, 10, &val);
+		if (ret)
+			return ret;
+	}
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	mutex_lock(&st->lock);
+	switch ((u32)this_attr->address) {
+	case AD5933_OUT_RANGE:
+		ret = -EINVAL;
+		for (i = 0; i < 4; i++)
+			if (val == st->range_avail[i]) {
+				st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
+				st->ctrl_hb |= AD5933_CTRL_RANGE(i);
+				ret = ad5933_cmd(st, 0);
+				break;
+			}
+		break;
+	case AD5933_IN_PGA_GAIN:
+		if (sysfs_streq(buf, "1")) {
+			st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1;
+		} else if (sysfs_streq(buf, "0.2")) {
+			st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1;
+		} else {
+			ret = -EINVAL;
+			break;
+		}
+		ret = ad5933_cmd(st, 0);
+		break;
+	case AD5933_OUT_SETTLING_CYCLES:
+		val = clamp(val, (u16)0, (u16)0x7FF);
+		st->settling_cycles = val;
+
+		/* 2x, 4x handling, see datasheet */
+		if (val > 1022)
+			val = (val >> 2) | (3 << 9);
+		else if (val > 511)
+			val = (val >> 1) | (1 << 9);
+
+		dat = cpu_to_be16(val);
+		ret = ad5933_i2c_write(st->client,
+				       AD5933_REG_SETTLING_CYCLES,
+				       2, (u8 *)&dat);
+		break;
+	case AD5933_FREQ_POINTS:
+		val = clamp(val, (u16)0, (u16)511);
+		st->freq_points = val;
+
+		dat = cpu_to_be16(val);
+		ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2,
+				       (u8 *)&dat);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&st->lock);
+	iio_device_release_direct_mode(indio_dev);
+	return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(out_voltage0_scale, 0644,
+			ad5933_show,
+			ad5933_store,
+			AD5933_OUT_RANGE);
+
+static IIO_DEVICE_ATTR(out_voltage0_scale_available, 0444,
+			ad5933_show,
+			NULL,
+			AD5933_OUT_RANGE_AVAIL);
+
+static IIO_DEVICE_ATTR(in_voltage0_scale, 0644,
+			ad5933_show,
+			ad5933_store,
+			AD5933_IN_PGA_GAIN);
+
+static IIO_DEVICE_ATTR(in_voltage0_scale_available, 0444,
+			ad5933_show,
+			NULL,
+			AD5933_IN_PGA_GAIN_AVAIL);
+
+static IIO_DEVICE_ATTR(out_voltage0_freq_points, 0644,
+			ad5933_show,
+			ad5933_store,
+			AD5933_FREQ_POINTS);
+
+static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644,
+			ad5933_show,
+			ad5933_store,
+			AD5933_OUT_SETTLING_CYCLES);
+
+/* note:
+ * ideally we would handle the scale attributes via the iio_info
+ * (read|write)_raw methods, however this part is a untypical since we
+ * don't create dedicated sysfs channel attributes for out0 and in0.
+ */
+static struct attribute *ad5933_attributes[] = {
+	&iio_dev_attr_out_voltage0_scale.dev_attr.attr,
+	&iio_dev_attr_out_voltage0_scale_available.dev_attr.attr,
+	&iio_dev_attr_out_voltage0_freq_start.dev_attr.attr,
+	&iio_dev_attr_out_voltage0_freq_increment.dev_attr.attr,
+	&iio_dev_attr_out_voltage0_freq_points.dev_attr.attr,
+	&iio_dev_attr_out_voltage0_settling_cycles.dev_attr.attr,
+	&iio_dev_attr_in_voltage0_scale.dev_attr.attr,
+	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad5933_attribute_group = {
+	.attrs = ad5933_attributes,
+};
+
+static int ad5933_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+	__be16 dat;
+	int ret;
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP);
+		if (ret < 0)
+			goto out;
+		ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID);
+		if (ret < 0)
+			goto out;
+
+		ret = ad5933_i2c_read(st->client,
+				      AD5933_REG_TEMP_DATA,
+				      2, (u8 *)&dat);
+		if (ret < 0)
+			goto out;
+		iio_device_release_direct_mode(indio_dev);
+		*val = sign_extend32(be16_to_cpu(dat), 13);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000;
+		*val2 = 5;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+out:
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+static const struct iio_info ad5933_info = {
+	.read_raw = ad5933_read_raw,
+	.attrs = &ad5933_attribute_group,
+};
+
+static int ad5933_ring_preenable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+		return -EINVAL;
+
+	ret = ad5933_reset(st);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_cmd(st, AD5933_CTRL_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ);
+	if (ret < 0)
+		return ret;
+
+	st->state = AD5933_CTRL_INIT_START_FREQ;
+
+	return 0;
+}
+
+static int ad5933_ring_postenable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	/* AD5933_CTRL_INIT_START_FREQ:
+	 * High Q complex circuits require a long time to reach steady state.
+	 * To facilitate the measurement of such impedances, this mode allows
+	 * the user full control of the settling time requirement before
+	 * entering start frequency sweep mode where the impedance measurement
+	 * takes place. In this mode the impedance is excited with the
+	 * programmed start frequency (ad5933_ring_preenable),
+	 * but no measurement takes place.
+	 */
+
+	schedule_delayed_work(&st->work,
+			      msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms));
+	return 0;
+}
+
+static int ad5933_ring_postdisable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	cancel_delayed_work_sync(&st->work);
+	return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
+}
+
+static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = {
+	.preenable = ad5933_ring_preenable,
+	.postenable = ad5933_ring_postenable,
+	.postdisable = ad5933_ring_postdisable,
+};
+
+static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer;
+
+	buffer = iio_kfifo_allocate();
+	if (!buffer)
+		return -ENOMEM;
+
+	iio_device_attach_buffer(indio_dev, buffer);
+
+	/* Ring buffer functions - here trigger setup related */
+	indio_dev->setup_ops = &ad5933_ring_setup_ops;
+
+	return 0;
+}
+
+static void ad5933_work(struct work_struct *work)
+{
+	struct ad5933_state *st = container_of(work,
+		struct ad5933_state, work.work);
+	struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
+	__be16 buf[2];
+	int val[2];
+	unsigned char status;
+	int ret;
+
+	if (st->state == AD5933_CTRL_INIT_START_FREQ) {
+		/* start sweep */
+		ad5933_cmd(st, AD5933_CTRL_START_SWEEP);
+		st->state = AD5933_CTRL_START_SWEEP;
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+		return;
+	}
+
+	ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status);
+	if (ret)
+		return;
+
+	if (status & AD5933_STAT_DATA_VALID) {
+		int scan_count = bitmap_weight(indio_dev->active_scan_mask,
+					       indio_dev->masklength);
+		ret = ad5933_i2c_read(st->client,
+				test_bit(1, indio_dev->active_scan_mask) ?
+				AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA,
+				scan_count * 2, (u8 *)buf);
+		if (ret)
+			return;
+
+		if (scan_count == 2) {
+			val[0] = be16_to_cpu(buf[0]);
+			val[1] = be16_to_cpu(buf[1]);
+		} else {
+			val[0] = be16_to_cpu(buf[0]);
+		}
+		iio_push_to_buffers(indio_dev, val);
+	} else {
+		/* no data available - try again later */
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+		return;
+	}
+
+	if (status & AD5933_STAT_SWEEP_DONE) {
+		/* last sample received - power down do
+		 * nothing until the ring enable is toggled
+		 */
+		ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
+	} else {
+		/* we just received a valid datum, move on to the next */
+		ad5933_cmd(st, AD5933_CTRL_INC_FREQ);
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+	}
+}
+
+static int ad5933_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct ad5933_state *st;
+	struct iio_dev *indio_dev;
+	unsigned long ext_clk_hz = 0;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	st->client = client;
+
+	mutex_init(&st->lock);
+
+	st->reg = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(st->reg))
+		return PTR_ERR(st->reg);
+
+	ret = regulator_enable(st->reg);
+	if (ret) {
+		dev_err(&client->dev, "Failed to enable specified VDD supply\n");
+		return ret;
+	}
+	ret = regulator_get_voltage(st->reg);
+
+	if (ret < 0)
+		goto error_disable_reg;
+
+	st->vref_mv = ret / 1000;
+
+	st->mclk = devm_clk_get(&client->dev, "mclk");
+	if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) {
+		ret = PTR_ERR(st->mclk);
+		goto error_disable_reg;
+	}
+
+	if (!IS_ERR(st->mclk)) {
+		ret = clk_prepare_enable(st->mclk);
+		if (ret < 0)
+			goto error_disable_reg;
+		ext_clk_hz = clk_get_rate(st->mclk);
+	}
+
+	if (ext_clk_hz) {
+		st->mclk_hz = ext_clk_hz;
+		st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
+	} else {
+		st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;
+		st->ctrl_lb = AD5933_CTRL_INT_SYSCLK;
+	}
+
+	ad5933_calc_out_ranges(st);
+	INIT_DELAYED_WORK(&st->work, ad5933_work);
+	st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ad5933_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
+	indio_dev->channels = ad5933_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
+
+	ret = ad5933_register_ring_funcs_and_init(indio_dev);
+	if (ret)
+		goto error_disable_mclk;
+
+	ret = ad5933_setup(st);
+	if (ret)
+		goto error_unreg_ring;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_ring;
+
+	return 0;
+
+error_unreg_ring:
+	iio_kfifo_free(indio_dev->buffer);
+error_disable_mclk:
+	clk_disable_unprepare(st->mclk);
+error_disable_reg:
+	regulator_disable(st->reg);
+
+	return ret;
+}
+
+static int ad5933_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_kfifo_free(indio_dev->buffer);
+	regulator_disable(st->reg);
+	clk_disable_unprepare(st->mclk);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad5933_id[] = {
+	{ "ad5933", 0 },
+	{ "ad5934", 0 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad5933_id);
+
+static const struct of_device_id ad5933_of_match[] = {
+	{ .compatible = "adi,ad5933" },
+	{ .compatible = "adi,ad5934" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, ad5933_of_match);
+
+static struct i2c_driver ad5933_driver = {
+	.driver = {
+		.name = "ad5933",
+		.of_match_table = ad5933_of_match,
+	},
+	.probe = ad5933_probe,
+	.remove = ad5933_remove,
+	.id_table = ad5933_id,
+};
+module_i2c_driver(ad5933_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/impedance-analyzer/Kconfig b/drivers/staging/iio/impedance-analyzer/Kconfig
deleted file mode 100644
index dd97b6bb3fd0..000000000000
--- a/drivers/staging/iio/impedance-analyzer/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Impedance Converter, Network Analyzer drivers
-#
-menu "Network Analyzer, Impedance Converters"
-
-config AD5933
-	tristate "Analog Devices AD5933, AD5934 driver"
-	depends on I2C
-	select IIO_BUFFER
-	select IIO_KFIFO_BUF
-	help
-	  Say yes here to build support for Analog Devices Impedance Converter,
-	  Network Analyzer, AD5933/4, provides direct access via sysfs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad5933.
-
-endmenu
diff --git a/drivers/staging/iio/impedance-analyzer/Makefile b/drivers/staging/iio/impedance-analyzer/Makefile
deleted file mode 100644
index 7604d786583e..000000000000
--- a/drivers/staging/iio/impedance-analyzer/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Impedance Converter, Network Analyzer drivers
-#
-
-obj-$(CONFIG_AD5933) += ad5933.o
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
deleted file mode 100644
index 3134295f014f..000000000000
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ /dev/null
@@ -1,809 +0,0 @@
-/*
- * AD5933 AD5934 Impedance Converter, Network Analyzer
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/sysfs.h>
-#include <linux/i2c.h>
-#include <linux/regulator/consumer.h>
-#include <linux/types.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/kfifo_buf.h>
-
-/* AD5933/AD5934 Registers */
-#define AD5933_REG_CONTROL_HB		0x80	/* R/W, 1 byte */
-#define AD5933_REG_CONTROL_LB		0x81	/* R/W, 1 byte */
-#define AD5933_REG_FREQ_START		0x82	/* R/W, 3 bytes */
-#define AD5933_REG_FREQ_INC		0x85	/* R/W, 3 bytes */
-#define AD5933_REG_INC_NUM		0x88	/* R/W, 2 bytes, 9 bit */
-#define AD5933_REG_SETTLING_CYCLES	0x8A	/* R/W, 2 bytes */
-#define AD5933_REG_STATUS		0x8F	/* R, 1 byte */
-#define AD5933_REG_TEMP_DATA		0x92	/* R, 2 bytes*/
-#define AD5933_REG_REAL_DATA		0x94	/* R, 2 bytes*/
-#define AD5933_REG_IMAG_DATA		0x96	/* R, 2 bytes*/
-
-/* AD5933_REG_CONTROL_HB Bits */
-#define AD5933_CTRL_INIT_START_FREQ	(0x1 << 4)
-#define AD5933_CTRL_START_SWEEP		(0x2 << 4)
-#define AD5933_CTRL_INC_FREQ		(0x3 << 4)
-#define AD5933_CTRL_REPEAT_FREQ		(0x4 << 4)
-#define AD5933_CTRL_MEASURE_TEMP	(0x9 << 4)
-#define AD5933_CTRL_POWER_DOWN		(0xA << 4)
-#define AD5933_CTRL_STANDBY		(0xB << 4)
-
-#define AD5933_CTRL_RANGE_2000mVpp	(0x0 << 1)
-#define AD5933_CTRL_RANGE_200mVpp	(0x1 << 1)
-#define AD5933_CTRL_RANGE_400mVpp	(0x2 << 1)
-#define AD5933_CTRL_RANGE_1000mVpp	(0x3 << 1)
-#define AD5933_CTRL_RANGE(x)		((x) << 1)
-
-#define AD5933_CTRL_PGA_GAIN_1		(0x1 << 0)
-#define AD5933_CTRL_PGA_GAIN_5		(0x0 << 0)
-
-/* AD5933_REG_CONTROL_LB Bits */
-#define AD5933_CTRL_RESET		(0x1 << 4)
-#define AD5933_CTRL_INT_SYSCLK		(0x0 << 3)
-#define AD5933_CTRL_EXT_SYSCLK		(0x1 << 3)
-
-/* AD5933_REG_STATUS Bits */
-#define AD5933_STAT_TEMP_VALID		(0x1 << 0)
-#define AD5933_STAT_DATA_VALID		(0x1 << 1)
-#define AD5933_STAT_SWEEP_DONE		(0x1 << 2)
-
-/* I2C Block Commands */
-#define AD5933_I2C_BLOCK_WRITE		0xA0
-#define AD5933_I2C_BLOCK_READ		0xA1
-#define AD5933_I2C_ADDR_POINTER		0xB0
-
-/* Device Specs */
-#define AD5933_INT_OSC_FREQ_Hz		16776000
-#define AD5933_MAX_OUTPUT_FREQ_Hz	100000
-#define AD5933_MAX_RETRIES		100
-
-#define AD5933_OUT_RANGE		1
-#define AD5933_OUT_RANGE_AVAIL		2
-#define AD5933_OUT_SETTLING_CYCLES	3
-#define AD5933_IN_PGA_GAIN		4
-#define AD5933_IN_PGA_GAIN_AVAIL	5
-#define AD5933_FREQ_POINTS		6
-
-#define AD5933_POLL_TIME_ms		10
-#define AD5933_INIT_EXCITATION_TIME_ms	100
-
-struct ad5933_state {
-	struct i2c_client		*client;
-	struct regulator		*reg;
-	struct clk			*mclk;
-	struct delayed_work		work;
-	struct mutex			lock; /* Protect sensor state */
-	unsigned long			mclk_hz;
-	unsigned char			ctrl_hb;
-	unsigned char			ctrl_lb;
-	unsigned int			range_avail[4];
-	unsigned short			vref_mv;
-	unsigned short			settling_cycles;
-	unsigned short			freq_points;
-	unsigned int			freq_start;
-	unsigned int			freq_inc;
-	unsigned int			state;
-	unsigned int			poll_time_jiffies;
-};
-
-#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \
-		_scan_index, _realbits) { \
-	.type = (_type), \
-	.extend_name = (_extend_name), \
-	.info_mask_separate = (_info_mask_separate), \
-	.address = (_address), \
-	.scan_index = (_scan_index), \
-	.scan_type = { \
-		.sign = 's', \
-		.realbits = (_realbits), \
-		.storagebits = 16, \
-	}, \
-}
-
-static const struct iio_chan_spec ad5933_channels[] = {
-	AD5933_CHANNEL(IIO_TEMP, NULL, BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_SCALE), AD5933_REG_TEMP_DATA, -1, 14),
-	/* Ring Channels */
-	AD5933_CHANNEL(IIO_VOLTAGE, "real", 0, AD5933_REG_REAL_DATA, 0, 16),
-	AD5933_CHANNEL(IIO_VOLTAGE, "imag", 0, AD5933_REG_IMAG_DATA, 1, 16),
-};
-
-static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data)
-{
-	int ret;
-
-	while (len--) {
-		ret = i2c_smbus_write_byte_data(client, reg++, *data++);
-		if (ret < 0) {
-			dev_err(&client->dev, "I2C write error\n");
-			return ret;
-		}
-	}
-	return 0;
-}
-
-static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data)
-{
-	int ret;
-
-	while (len--) {
-		ret = i2c_smbus_read_byte_data(client, reg++);
-		if (ret < 0) {
-			dev_err(&client->dev, "I2C read error\n");
-			return ret;
-		}
-		*data++ = ret;
-	}
-	return 0;
-}
-
-static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd)
-{
-	unsigned char dat = st->ctrl_hb | cmd;
-
-	return ad5933_i2c_write(st->client,
-			AD5933_REG_CONTROL_HB, 1, &dat);
-}
-
-static int ad5933_reset(struct ad5933_state *st)
-{
-	unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET;
-
-	return ad5933_i2c_write(st->client,
-			AD5933_REG_CONTROL_LB, 1, &dat);
-}
-
-static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event)
-{
-	unsigned char val, timeout = AD5933_MAX_RETRIES;
-	int ret;
-
-	while (timeout--) {
-		ret =  ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val);
-		if (ret < 0)
-			return ret;
-		if (val & event)
-			return val;
-		cpu_relax();
-		mdelay(1);
-	}
-
-	return -EAGAIN;
-}
-
-static int ad5933_set_freq(struct ad5933_state *st,
-			   unsigned int reg, unsigned long freq)
-{
-	unsigned long long freqreg;
-	union {
-		__be32 d32;
-		u8 d8[4];
-	} dat;
-
-	freqreg = (u64)freq * (u64)(1 << 27);
-	do_div(freqreg, st->mclk_hz / 4);
-
-	switch (reg) {
-	case AD5933_REG_FREQ_START:
-		st->freq_start = freq;
-		break;
-	case AD5933_REG_FREQ_INC:
-		st->freq_inc = freq;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dat.d32 = cpu_to_be32(freqreg);
-	return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]);
-}
-
-static int ad5933_setup(struct ad5933_state *st)
-{
-	__be16 dat;
-	int ret;
-
-	ret = ad5933_reset(st);
-	if (ret < 0)
-		return ret;
-
-	ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000);
-	if (ret < 0)
-		return ret;
-
-	ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200);
-	if (ret < 0)
-		return ret;
-
-	st->settling_cycles = 10;
-	dat = cpu_to_be16(st->settling_cycles);
-
-	ret = ad5933_i2c_write(st->client,
-			       AD5933_REG_SETTLING_CYCLES,
-			       2, (u8 *)&dat);
-	if (ret < 0)
-		return ret;
-
-	st->freq_points = 100;
-	dat = cpu_to_be16(st->freq_points);
-
-	return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat);
-}
-
-static void ad5933_calc_out_ranges(struct ad5933_state *st)
-{
-	int i;
-	unsigned int normalized_3v3[4] = {1980, 198, 383, 970};
-
-	for (i = 0; i < 4; i++)
-		st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300;
-}
-
-/*
- * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC
- */
-
-static ssize_t ad5933_show_frequency(struct device *dev,
-				     struct device_attribute *attr,
-				     char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad5933_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	int ret;
-	unsigned long long freqreg;
-	union {
-		__be32 d32;
-		u8 d8[4];
-	} dat;
-
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-	ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]);
-	iio_device_release_direct_mode(indio_dev);
-	if (ret < 0)
-		return ret;
-
-	freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF;
-
-	freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4);
-	do_div(freqreg, 1 << 27);
-
-	return sprintf(buf, "%d\n", (int)freqreg);
-}
-
-static ssize_t ad5933_store_frequency(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf,
-				      size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad5933_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	unsigned long val;
-	int ret;
-
-	ret = kstrtoul(buf, 10, &val);
-	if (ret)
-		return ret;
-
-	if (val > AD5933_MAX_OUTPUT_FREQ_Hz)
-		return -EINVAL;
-
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-	ret = ad5933_set_freq(st, this_attr->address, val);
-	iio_device_release_direct_mode(indio_dev);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(out_voltage0_freq_start, 0644,
-			ad5933_show_frequency,
-			ad5933_store_frequency,
-			AD5933_REG_FREQ_START);
-
-static IIO_DEVICE_ATTR(out_voltage0_freq_increment, 0644,
-			ad5933_show_frequency,
-			ad5933_store_frequency,
-			AD5933_REG_FREQ_INC);
-
-static ssize_t ad5933_show(struct device *dev,
-			   struct device_attribute *attr,
-			   char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad5933_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	int ret = 0, len = 0;
-
-	mutex_lock(&st->lock);
-	switch ((u32)this_attr->address) {
-	case AD5933_OUT_RANGE:
-		len = sprintf(buf, "%u\n",
-			      st->range_avail[(st->ctrl_hb >> 1) & 0x3]);
-		break;
-	case AD5933_OUT_RANGE_AVAIL:
-		len = sprintf(buf, "%u %u %u %u\n", st->range_avail[0],
-			      st->range_avail[3], st->range_avail[2],
-			      st->range_avail[1]);
-		break;
-	case AD5933_OUT_SETTLING_CYCLES:
-		len = sprintf(buf, "%d\n", st->settling_cycles);
-		break;
-	case AD5933_IN_PGA_GAIN:
-		len = sprintf(buf, "%s\n",
-			      (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ?
-			      "1" : "0.2");
-		break;
-	case AD5933_IN_PGA_GAIN_AVAIL:
-		len = sprintf(buf, "1 0.2\n");
-		break;
-	case AD5933_FREQ_POINTS:
-		len = sprintf(buf, "%d\n", st->freq_points);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&st->lock);
-	return ret ? ret : len;
-}
-
-static ssize_t ad5933_store(struct device *dev,
-			    struct device_attribute *attr,
-			    const char *buf,
-			    size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad5933_state *st = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	u16 val;
-	int i, ret = 0;
-	__be16 dat;
-
-	if (this_attr->address != AD5933_IN_PGA_GAIN) {
-		ret = kstrtou16(buf, 10, &val);
-		if (ret)
-			return ret;
-	}
-
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-	mutex_lock(&st->lock);
-	switch ((u32)this_attr->address) {
-	case AD5933_OUT_RANGE:
-		ret = -EINVAL;
-		for (i = 0; i < 4; i++)
-			if (val == st->range_avail[i]) {
-				st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
-				st->ctrl_hb |= AD5933_CTRL_RANGE(i);
-				ret = ad5933_cmd(st, 0);
-				break;
-			}
-		break;
-	case AD5933_IN_PGA_GAIN:
-		if (sysfs_streq(buf, "1")) {
-			st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1;
-		} else if (sysfs_streq(buf, "0.2")) {
-			st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1;
-		} else {
-			ret = -EINVAL;
-			break;
-		}
-		ret = ad5933_cmd(st, 0);
-		break;
-	case AD5933_OUT_SETTLING_CYCLES:
-		val = clamp(val, (u16)0, (u16)0x7FF);
-		st->settling_cycles = val;
-
-		/* 2x, 4x handling, see datasheet */
-		if (val > 1022)
-			val = (val >> 2) | (3 << 9);
-		else if (val > 511)
-			val = (val >> 1) | (1 << 9);
-
-		dat = cpu_to_be16(val);
-		ret = ad5933_i2c_write(st->client,
-				       AD5933_REG_SETTLING_CYCLES,
-				       2, (u8 *)&dat);
-		break;
-	case AD5933_FREQ_POINTS:
-		val = clamp(val, (u16)0, (u16)511);
-		st->freq_points = val;
-
-		dat = cpu_to_be16(val);
-		ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2,
-				       (u8 *)&dat);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&st->lock);
-	iio_device_release_direct_mode(indio_dev);
-	return ret ? ret : len;
-}
-
-static IIO_DEVICE_ATTR(out_voltage0_scale, 0644,
-			ad5933_show,
-			ad5933_store,
-			AD5933_OUT_RANGE);
-
-static IIO_DEVICE_ATTR(out_voltage0_scale_available, 0444,
-			ad5933_show,
-			NULL,
-			AD5933_OUT_RANGE_AVAIL);
-
-static IIO_DEVICE_ATTR(in_voltage0_scale, 0644,
-			ad5933_show,
-			ad5933_store,
-			AD5933_IN_PGA_GAIN);
-
-static IIO_DEVICE_ATTR(in_voltage0_scale_available, 0444,
-			ad5933_show,
-			NULL,
-			AD5933_IN_PGA_GAIN_AVAIL);
-
-static IIO_DEVICE_ATTR(out_voltage0_freq_points, 0644,
-			ad5933_show,
-			ad5933_store,
-			AD5933_FREQ_POINTS);
-
-static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644,
-			ad5933_show,
-			ad5933_store,
-			AD5933_OUT_SETTLING_CYCLES);
-
-/* note:
- * ideally we would handle the scale attributes via the iio_info
- * (read|write)_raw methods, however this part is a untypical since we
- * don't create dedicated sysfs channel attributes for out0 and in0.
- */
-static struct attribute *ad5933_attributes[] = {
-	&iio_dev_attr_out_voltage0_scale.dev_attr.attr,
-	&iio_dev_attr_out_voltage0_scale_available.dev_attr.attr,
-	&iio_dev_attr_out_voltage0_freq_start.dev_attr.attr,
-	&iio_dev_attr_out_voltage0_freq_increment.dev_attr.attr,
-	&iio_dev_attr_out_voltage0_freq_points.dev_attr.attr,
-	&iio_dev_attr_out_voltage0_settling_cycles.dev_attr.attr,
-	&iio_dev_attr_in_voltage0_scale.dev_attr.attr,
-	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group ad5933_attribute_group = {
-	.attrs = ad5933_attributes,
-};
-
-static int ad5933_read_raw(struct iio_dev *indio_dev,
-			   struct iio_chan_spec const *chan,
-			   int *val,
-			   int *val2,
-			   long m)
-{
-	struct ad5933_state *st = iio_priv(indio_dev);
-	__be16 dat;
-	int ret;
-
-	switch (m) {
-	case IIO_CHAN_INFO_RAW:
-		ret = iio_device_claim_direct_mode(indio_dev);
-		if (ret)
-			return ret;
-		ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP);
-		if (ret < 0)
-			goto out;
-		ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID);
-		if (ret < 0)
-			goto out;
-
-		ret = ad5933_i2c_read(st->client,
-				      AD5933_REG_TEMP_DATA,
-				      2, (u8 *)&dat);
-		if (ret < 0)
-			goto out;
-		iio_device_release_direct_mode(indio_dev);
-		*val = sign_extend32(be16_to_cpu(dat), 13);
-
-		return IIO_VAL_INT;
-	case IIO_CHAN_INFO_SCALE:
-		*val = 1000;
-		*val2 = 5;
-		return IIO_VAL_FRACTIONAL_LOG2;
-	}
-
-	return -EINVAL;
-out:
-	iio_device_release_direct_mode(indio_dev);
-	return ret;
-}
-
-static const struct iio_info ad5933_info = {
-	.read_raw = ad5933_read_raw,
-	.attrs = &ad5933_attribute_group,
-};
-
-static int ad5933_ring_preenable(struct iio_dev *indio_dev)
-{
-	struct ad5933_state *st = iio_priv(indio_dev);
-	int ret;
-
-	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
-		return -EINVAL;
-
-	ret = ad5933_reset(st);
-	if (ret < 0)
-		return ret;
-
-	ret = ad5933_cmd(st, AD5933_CTRL_STANDBY);
-	if (ret < 0)
-		return ret;
-
-	ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ);
-	if (ret < 0)
-		return ret;
-
-	st->state = AD5933_CTRL_INIT_START_FREQ;
-
-	return 0;
-}
-
-static int ad5933_ring_postenable(struct iio_dev *indio_dev)
-{
-	struct ad5933_state *st = iio_priv(indio_dev);
-
-	/* AD5933_CTRL_INIT_START_FREQ:
-	 * High Q complex circuits require a long time to reach steady state.
-	 * To facilitate the measurement of such impedances, this mode allows
-	 * the user full control of the settling time requirement before
-	 * entering start frequency sweep mode where the impedance measurement
-	 * takes place. In this mode the impedance is excited with the
-	 * programmed start frequency (ad5933_ring_preenable),
-	 * but no measurement takes place.
-	 */
-
-	schedule_delayed_work(&st->work,
-			      msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms));
-	return 0;
-}
-
-static int ad5933_ring_postdisable(struct iio_dev *indio_dev)
-{
-	struct ad5933_state *st = iio_priv(indio_dev);
-
-	cancel_delayed_work_sync(&st->work);
-	return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
-}
-
-static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = {
-	.preenable = ad5933_ring_preenable,
-	.postenable = ad5933_ring_postenable,
-	.postdisable = ad5933_ring_postdisable,
-};
-
-static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
-{
-	struct iio_buffer *buffer;
-
-	buffer = iio_kfifo_allocate();
-	if (!buffer)
-		return -ENOMEM;
-
-	iio_device_attach_buffer(indio_dev, buffer);
-
-	/* Ring buffer functions - here trigger setup related */
-	indio_dev->setup_ops = &ad5933_ring_setup_ops;
-
-	return 0;
-}
-
-static void ad5933_work(struct work_struct *work)
-{
-	struct ad5933_state *st = container_of(work,
-		struct ad5933_state, work.work);
-	struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
-	__be16 buf[2];
-	int val[2];
-	unsigned char status;
-	int ret;
-
-	if (st->state == AD5933_CTRL_INIT_START_FREQ) {
-		/* start sweep */
-		ad5933_cmd(st, AD5933_CTRL_START_SWEEP);
-		st->state = AD5933_CTRL_START_SWEEP;
-		schedule_delayed_work(&st->work, st->poll_time_jiffies);
-		return;
-	}
-
-	ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status);
-	if (ret)
-		return;
-
-	if (status & AD5933_STAT_DATA_VALID) {
-		int scan_count = bitmap_weight(indio_dev->active_scan_mask,
-					       indio_dev->masklength);
-		ret = ad5933_i2c_read(st->client,
-				test_bit(1, indio_dev->active_scan_mask) ?
-				AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA,
-				scan_count * 2, (u8 *)buf);
-		if (ret)
-			return;
-
-		if (scan_count == 2) {
-			val[0] = be16_to_cpu(buf[0]);
-			val[1] = be16_to_cpu(buf[1]);
-		} else {
-			val[0] = be16_to_cpu(buf[0]);
-		}
-		iio_push_to_buffers(indio_dev, val);
-	} else {
-		/* no data available - try again later */
-		schedule_delayed_work(&st->work, st->poll_time_jiffies);
-		return;
-	}
-
-	if (status & AD5933_STAT_SWEEP_DONE) {
-		/* last sample received - power down do
-		 * nothing until the ring enable is toggled
-		 */
-		ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
-	} else {
-		/* we just received a valid datum, move on to the next */
-		ad5933_cmd(st, AD5933_CTRL_INC_FREQ);
-		schedule_delayed_work(&st->work, st->poll_time_jiffies);
-	}
-}
-
-static int ad5933_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	int ret;
-	struct ad5933_state *st;
-	struct iio_dev *indio_dev;
-	unsigned long ext_clk_hz = 0;
-
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	st = iio_priv(indio_dev);
-	i2c_set_clientdata(client, indio_dev);
-	st->client = client;
-
-	mutex_init(&st->lock);
-
-	st->reg = devm_regulator_get(&client->dev, "vdd");
-	if (IS_ERR(st->reg))
-		return PTR_ERR(st->reg);
-
-	ret = regulator_enable(st->reg);
-	if (ret) {
-		dev_err(&client->dev, "Failed to enable specified VDD supply\n");
-		return ret;
-	}
-	ret = regulator_get_voltage(st->reg);
-
-	if (ret < 0)
-		goto error_disable_reg;
-
-	st->vref_mv = ret / 1000;
-
-	st->mclk = devm_clk_get(&client->dev, "mclk");
-	if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) {
-		ret = PTR_ERR(st->mclk);
-		goto error_disable_reg;
-	}
-
-	if (!IS_ERR(st->mclk)) {
-		ret = clk_prepare_enable(st->mclk);
-		if (ret < 0)
-			goto error_disable_reg;
-		ext_clk_hz = clk_get_rate(st->mclk);
-	}
-
-	if (ext_clk_hz) {
-		st->mclk_hz = ext_clk_hz;
-		st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
-	} else {
-		st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;
-		st->ctrl_lb = AD5933_CTRL_INT_SYSCLK;
-	}
-
-	ad5933_calc_out_ranges(st);
-	INIT_DELAYED_WORK(&st->work, ad5933_work);
-	st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms);
-
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &ad5933_info;
-	indio_dev->name = id->name;
-	indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
-	indio_dev->channels = ad5933_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
-
-	ret = ad5933_register_ring_funcs_and_init(indio_dev);
-	if (ret)
-		goto error_disable_mclk;
-
-	ret = ad5933_setup(st);
-	if (ret)
-		goto error_unreg_ring;
-
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto error_unreg_ring;
-
-	return 0;
-
-error_unreg_ring:
-	iio_kfifo_free(indio_dev->buffer);
-error_disable_mclk:
-	clk_disable_unprepare(st->mclk);
-error_disable_reg:
-	regulator_disable(st->reg);
-
-	return ret;
-}
-
-static int ad5933_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ad5933_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	iio_kfifo_free(indio_dev->buffer);
-	regulator_disable(st->reg);
-	clk_disable_unprepare(st->mclk);
-
-	return 0;
-}
-
-static const struct i2c_device_id ad5933_id[] = {
-	{ "ad5933", 0 },
-	{ "ad5934", 0 },
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, ad5933_id);
-
-static const struct of_device_id ad5933_of_match[] = {
-	{ .compatible = "adi,ad5933" },
-	{ .compatible = "adi,ad5934" },
-	{ },
-};
-
-MODULE_DEVICE_TABLE(of, ad5933_of_match);
-
-static struct i2c_driver ad5933_driver = {
-	.driver = {
-		.name = "ad5933",
-		.of_match_table = ad5933_of_match,
-	},
-	.probe = ad5933_probe,
-	.remove = ad5933_remove,
-	.id_table = ad5933_id,
-};
-module_i2c_driver(ad5933_driver);
-
-MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer");
-MODULE_LICENSE("GPL v2");
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread