* [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle.
@ 2019-05-19 8:57 Jonathan Cameron
2019-05-20 7:14 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2019-05-19 8:57 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 575d927c426b83f5f8d5809f46de177cceffe40c:
LS1021A: dtsi: add ftm quad decoder entries (2019-04-25 21:33:42 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.3a
for you to fetch changes up to 6d97024dce236619b0bb85bdb5028019ed7fda56:
iio: adc: mediatek: mt6577-auxadc, add mt6765 support (2019-05-19 09:18:30 +0100)
----------------------------------------------------------------
First set of new device support, features and cleanups for IIO in the 5.3 cycle
New device support
* mt6577
- add supprot for the mt6765 which requires a few minor additional
new features in the driver.
Yaml binding conversions
* adxl345
* isl29018
* tsl2583
* tsl2772
Minor features and improvements
* ad5758
- declare an of_device_id table rather than just relying on the spi
fallback which doesn't use the manufacturer id.
- drop a set but not used variable left from previous refactor.
* ad7816
- Add a bit more description to kconfig text.
* ad9523
- change calculation order to improve frequency accuracy.
* adxl372
- declare an of_device_id table
* adt7316
- white space.
* at91_adc
- Use dev_get_drvdata directly rather than boucing to the platform device
and back again.
* cros_ec
- add an id sysfs entry to bring in line with the other implementations.
* ds5522
- drop a check on the of_node existing as we don't actually use it for
anything.
* kxsd9
- declare an of_device_id table.
* maxim_thermocouple
- declare an of_device_id table.
* mt6577
- add dt binding entry for mt8183 which is also supported.
* rcar-gyroadc
- tidy up unnecessary error messages.
* stm32-dfsdm
- improved error handling.
* stmpe-adc
- drop an unnecessary variable assignment.
- add an of_device_id table.
- reinit completion on begin converstion to avoid a path in which
previous round had been interrupted, also switch to non interruptible
wait to avoid an issue with a user program using -pg
- simplify interrupt handling by just having them always enabled.
- reset all interrupts on startup and in the timeout handler to
avoid getting stuck.
* sun4i-gpadc
- SPDX
----------------------------------------------------------------
Alexandru Ardelean (1):
dt-bindings: iio: accel: adxl345: switch to YAML bindings
Brian Masney (3):
dt-bindings: iio: tsl2583: convert bindings to YAML format
dt-bindings: iio: tsl2772: convert bindings to YAML format
dt-bindings: iio: isl29018: convert bindings to YAML format
Chun-Hung Wu (2):
dt-bindings: iio: adc: mediatek: Add document for mt6765
iio: adc: mediatek: mt6577-auxadc, add mt6765 support
Daniel Gomez (4):
iio: temperature: maxim_thermocouple: declare missing of table
iio: accel: kxsd9: declare missing of table
iio: adxl372: declare missing of table
iio: dac: ad5758: declare missing of table
Fabien Dessenne (2):
iio: adc: stm32-dfsdm: manage the get_irq error case
iio: adc: stm32-dfsdm: missing error case during probe
Geert Uytterhoeven (1):
iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printing
Gwendal Grignou (1):
iio: cros_ec: add 'id' sysfs entry
João Seckler (1):
staging: iio: adt7316: match parenthesis alignment
Kefeng Wang (1):
iio: adc: at91: Use dev_get_drvdata()
Lars-Peter Clausen (1):
iio: ad9523-1: Improve reported VCO frequency accuracy
Philippe Schenker (6):
iio: stmpe-adc: Remove unnecessary assignment
iio: stmpe-adc: Add compatible name
iio: stmpe-adc: Reinit completion struct on begin conversion
iio: stmpe-adc: Enable all stmpe-adc interrupts just once
iio: stmpe-adc: Use wait_for_completion_timeout
iio: stmpe-adc: Reset possible interrupts
Ruslan Babayev (1):
iio: dac: ds4422/ds4424 drop of_node check
Vatsala Narang (1):
staging: iio: adc: Add paragraph to describe Kconfig symbol
Yangtao Li (1):
iio: adc: sun4i-gpadc-iio convert to SPDX license tags
YueHaibing (1):
iio: dac: ad5758: remove set but not used variable 'dc_dc_mode'
Zhiyong Tao (1):
dt-bindings: adc: mt8183: add binding document
Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 10 +--
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 72 +++++++++++++++++++
.../devicetree/bindings/iio/accel/adxl345.txt | 39 ----------
.../devicetree/bindings/iio/adc/mt6577_auxadc.txt | 2 +
.../devicetree/bindings/iio/light/isl29018.txt | 27 -------
.../devicetree/bindings/iio/light/isl29018.yaml | 56 +++++++++++++++
.../devicetree/bindings/iio/light/tsl2583.txt | 25 -------
.../devicetree/bindings/iio/light/tsl2583.yaml | 46 ++++++++++++
.../devicetree/bindings/iio/light/tsl2772.txt | 42 -----------
.../devicetree/bindings/iio/light/tsl2772.yaml | 83 ++++++++++++++++++++++
MAINTAINERS | 1 +
drivers/iio/accel/adxl372_spi.c | 9 +++
drivers/iio/accel/kxsd9-spi.c | 9 +++
drivers/iio/adc/at91-sama5d2_adc.c | 12 ++--
drivers/iio/adc/at91_adc.c | 4 +-
drivers/iio/adc/mt6577_auxadc.c | 54 ++++++++++----
drivers/iio/adc/rcar-gyroadc.c | 4 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 6 ++
drivers/iio/adc/stm32-dfsdm-core.c | 8 ++-
drivers/iio/adc/stmpe-adc.c | 40 ++++++-----
drivers/iio/adc/sun4i-gpadc-iio.c | 5 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 14 ++++
drivers/iio/dac/ad5758.c | 18 +++--
drivers/iio/dac/ds4424.c | 6 --
drivers/iio/frequency/ad9523.c | 8 ++-
drivers/iio/temperature/maxim_thermocouple.c | 10 +++
drivers/staging/iio/adc/Kconfig | 3 +
drivers/staging/iio/addac/adt7316.c | 2 +-
28 files changed, 411 insertions(+), 204 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt
delete mode 100644 Documentation/devicetree/bindings/iio/light/isl29018.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/isl29018.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.yaml
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle.
2019-05-19 8:57 [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle Jonathan Cameron
@ 2019-05-20 7:14 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2019-05-20 7:14 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, May 19, 2019 at 09:57:00AM +0100, Jonathan Cameron wrote:
> The following changes since commit 575d927c426b83f5f8d5809f46de177cceffe40c:
>
> LS1021A: dtsi: add ftm quad decoder entries (2019-04-25 21:33:42 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.3a
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-05-20 7:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-19 8:57 [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle Jonathan Cameron
2019-05-20 7:14 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).