linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
Date: Sun, 19 May 2019 12:36:46 +0100	[thread overview]
Message-ID: <20190519123646.3b05a0b5@archlinux> (raw)
In-Reply-To: <a79978d7b8b9762954bf15cb205bada6dc66079a.1558256188.git.lorenzo@kernel.org>

On Sun, 19 May 2019 10:58:23 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Properly suspend/resume i2c slaves connected to st_lsm6dsx master
> controller if the CPU goes in suspended state
> 
> Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support")
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  2 ++
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 25 +++++++++++++-------
>  2 files changed, 19 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 004a8a1a0027..6ef3577234a0 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -271,6 +271,7 @@ struct st_lsm6dsx_sensor {
>   * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
>   * @page_lock: Mutex to prevent concurrent memory page configuration.
>   * @fifo_mode: FIFO operating mode supported by the device.
> + * @suspend_mask: Suspended sensor bitmask.
>   * @enable_mask: Enabled sensor bitmask.
>   * @ts_sip: Total number of timestamp samples in a given pattern.
>   * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
> @@ -288,6 +289,7 @@ struct st_lsm6dsx_hw {
>  	struct mutex page_lock;
>  
>  	enum st_lsm6dsx_fifo_mode fifo_mode;
> +	u8 suspend_mask;
>  	u8 enable_mask;
>  	u8 ts_sip;
>  	u8 sip;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index cf82c9049945..be5c87c8266d 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -1110,8 +1110,6 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
>  {
>  	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
>  	struct st_lsm6dsx_sensor *sensor;
> -	const struct st_lsm6dsx_reg *reg;
> -	unsigned int data;
>  	int i, err = 0;
>  
>  	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
> @@ -1122,12 +1120,16 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
>  		if (!(hw->enable_mask & BIT(sensor->id)))
>  			continue;
>  
> -		reg = &st_lsm6dsx_odr_table[sensor->id].reg;
> -		data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
> -		err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
> -						    data);
> +		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
> +		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
> +		    sensor->id == ST_LSM6DSX_ID_EXT2)
> +			err = st_lsm6dsx_shub_set_enable(sensor, false);
> +		else
> +			err = st_lsm6dsx_sensor_set_enable(sensor, false);
>  		if (err < 0)
>  			return err;
> +
> +		hw->suspend_mask |= BIT(sensor->id);
>  	}
>  
>  	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
> @@ -1147,12 +1149,19 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
>  			continue;
>  
>  		sensor = iio_priv(hw->iio_devs[i]);
> -		if (!(hw->enable_mask & BIT(sensor->id)))
> +		if (!(hw->suspend_mask & BIT(sensor->id)))
>  			continue;
>  
> -		err = st_lsm6dsx_set_odr(sensor, sensor->odr);
> +		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
> +		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
> +		    sensor->id == ST_LSM6DSX_ID_EXT2)
> +			err = st_lsm6dsx_shub_set_enable(sensor, true);
> +		else
> +			err = st_lsm6dsx_sensor_set_enable(sensor, true);
>  		if (err < 0)
>  			return err;
> +
> +		hw->suspend_mask &= ~BIT(sensor->id);
>  	}
>  
>  	if (hw->enable_mask)


      reply	other threads:[~2019-05-19 17:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1558256188.git.lorenzo@kernel.org>
2019-05-19  8:58 ` [PATCH] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller Lorenzo Bianconi
2019-05-19 11:36   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190519123646.3b05a0b5@archlinux \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).