linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
@ 2019-05-22 14:09 Fabien Lahoudere
  2019-05-22 14:09 ` [PATCH 2/3] iio: common: cros_ec_sensors: add sysfs attribute for frequencies Fabien Lahoudere
                   ` (4 more replies)
  0 siblings, 5 replies; 8+ messages in thread
From: Fabien Lahoudere @ 2019-05-22 14:09 UTC (permalink / raw)
  Cc: kernel, Fabien Lahoudere, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, Benson Leung,
	Enric Balletbo i Serra, Guenter Roeck, Lee Jones,
	Gwendal Grignou, linux-iio, linux-kernel

Version 3 of the EC protocol provides min and max frequencies and fifo
size for EC sensors.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
---
 .../cros_ec_sensors/cros_ec_sensors_core.c    | 98 ++++++++++++++++++-
 .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
 include/linux/mfd/cros_ec_commands.h          | 21 ++++
 3 files changed, 125 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 719a0df5aeeb..d5c8b4714ad6 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -19,12 +19,84 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 
+/*
+ * Hard coded to the first device to support sensor fifo.  The EC has a 2048
+ * byte fifo and will trigger an interrupt when fifo is 2/3 full.
+ */
+#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
+
 static char *cros_ec_loc[] = {
 	[MOTIONSENSE_LOC_BASE] = "base",
 	[MOTIONSENSE_LOC_LID] = "lid",
 	[MOTIONSENSE_LOC_MAX] = "unknown",
 };
 
+static void get_default_min_max_freq_and_fifo_size(enum motionsensor_type type,
+						   u32 *min_freq,
+						   u32 *max_freq,
+						   u32 *max_fifo_events)
+{
+	/* we don't know fifo size, set to size previously used by sensor HAL */
+	*max_fifo_events = CROS_EC_FIFO_SIZE;
+
+	switch (type) {
+	case MOTIONSENSE_TYPE_ACCEL:
+	case MOTIONSENSE_TYPE_GYRO:
+		*min_freq = 12500;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_MAG:
+		*min_freq = 5000;
+		*max_freq = 25000;
+		break;
+	case MOTIONSENSE_TYPE_PROX:
+	case MOTIONSENSE_TYPE_LIGHT:
+		*min_freq = 100;
+		*max_freq = 50000;
+		break;
+	case MOTIONSENSE_TYPE_BARO:
+		*min_freq = 250;
+		*max_freq = 20000;
+		break;
+	case MOTIONSENSE_TYPE_ACTIVITY:
+	default:
+		*max_fifo_events = 0;
+		*min_freq = 0;
+		*max_freq = 0;
+		break;
+	}
+}
+
+static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
+					     u16 cmd_offset, u16 cmd, u32 *mask)
+{
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_params_get_cmd_versions params;
+			struct ec_response_get_cmd_versions resp;
+		};
+	} __packed buf;
+	struct ec_params_get_cmd_versions *params = &buf.params;
+	struct ec_response_get_cmd_versions *resp = &buf.resp;
+	struct cros_ec_command *msg = &buf.msg;
+	int ret;
+
+	memset(&buf, 0, sizeof(buf));
+	msg->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
+	msg->insize = sizeof(*resp);
+	msg->outsize = sizeof(*params);
+	params->cmd = cmd;
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+	if (ret >= 0) {
+		if (msg->result == EC_RES_SUCCESS)
+			*mask = resp->version_mask;
+		else
+			*mask = 0;
+	}
+	return ret;
+}
+
 int cros_ec_sensors_core_init(struct platform_device *pdev,
 			      struct iio_dev *indio_dev,
 			      bool physical_device)
@@ -33,6 +105,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
 	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	u32 ver_mask;
+	int ret;
 
 	platform_set_drvdata(pdev, indio_dev);
 
@@ -47,8 +121,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 
 	mutex_init(&state->cmd_lock);
 
+	/* determine what version of MOTIONSENSE CMD EC has */
+	ret = cros_ec_get_host_cmd_version_mask(state->ec,
+						ec->cmd_offset,
+						EC_CMD_MOTION_SENSE_CMD,
+						&ver_mask);
+	if (ret < 0 || ver_mask == 0)
+		return -ENODEV;
+
 	/* Set up the host command structure. */
-	state->msg->version = 2;
+	state->msg->version = fls(ver_mask) - 1;
 	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
 	state->msg->outsize = sizeof(struct ec_params_motion_sense);
 
@@ -66,6 +148,20 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 		}
 		state->type = state->resp->info.type;
 		state->loc = state->resp->info.location;
+		if (state->msg->version < 3) {
+			get_default_min_max_freq_and_fifo_size(
+					state->resp->info.type,
+					&state->min_freq,
+					&state->max_freq,
+					&state->fifo_max_event_count);
+		} else {
+			state->min_freq =
+				state->resp->info_3.min_frequency;
+			state->max_freq =
+				state->resp->info_3.max_frequency;
+			state->fifo_max_event_count =
+				state->resp->info_3.fifo_max_event_count;
+		}
 	}
 
 	return 0;
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index ce16445411ac..4742a9637a85 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -78,6 +78,13 @@ struct cros_ec_sensors_core_state {
 				    unsigned long scan_mask, s16 *data);
 
 	int curr_sampl_freq;
+
+	/* Min and Max Sampling Frequency in mHz */
+	u32 min_freq;
+	u32 max_freq;
+
+	/* event fifo size represented in number of events */
+	u32 fifo_max_event_count;
 };
 
 /**
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index dcec96f01879..27d71cbf22f1 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1744,6 +1744,27 @@ struct ec_response_motion_sense {
 			uint8_t chip;
 		} info;
 
+		/* Used for MOTIONSENSE_CMD_INFO version 3 */
+		struct __ec_todo_unpacked {
+			/* Should be element of enum motionsensor_type. */
+			uint8_t type;
+
+			/* Should be element of enum motionsensor_location. */
+			uint8_t location;
+
+			/* Should be element of enum motionsensor_chip. */
+			uint8_t chip;
+
+			/* Minimum sensor sampling frequency */
+			uint32_t min_frequency;
+
+			/* Maximum sensor sampling frequency */
+			uint32_t max_frequency;
+
+			/* Max number of sensor events that could be in fifo */
+			uint32_t fifo_max_event_count;
+		} info_3;
+
 		/* Used for MOTIONSENSE_CMD_DATA */
 		struct ec_response_motion_sensor_data data;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH 2/3] iio: common: cros_ec_sensors: add sysfs attribute for frequencies
  2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
@ 2019-05-22 14:09 ` Fabien Lahoudere
  2019-05-22 14:09 ` [PATCH 3/3] docs: iio: add precision about sampling_frequency_available Fabien Lahoudere
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 8+ messages in thread
From: Fabien Lahoudere @ 2019-05-22 14:09 UTC (permalink / raw)
  Cc: kernel, Fabien Lahoudere, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, Benson Leung,
	Enric Balletbo i Serra, Guenter Roeck, Lee Jones,
	Gwendal Grignou, linux-iio, linux-kernel

In order to provide minimum and maximum frequencies for each sensors,
we use a standard API (sampling_frequency_available) to provide them
to userland.
As cros_ec_sensors_core_init do not manage default attrs, we change
the signature to let all kind of sensors to provide "struct iio_info"
with their callback. This change impact drivers using that function.

Then cros_ec_* sensors provides frequencies range in sysfs like this:
[min step max]

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
---
 .../common/cros_ec_sensors/cros_ec_sensors.c  |  6 +--
 .../cros_ec_sensors/cros_ec_sensors_core.c    | 38 +++++++++++++++++++
 drivers/iio/light/cros_ec_light_prox.c        |  6 +--
 drivers/iio/pressure/cros_ec_baro.c           |  6 +--
 .../linux/iio/common/cros_ec_sensors_core.h   |  4 +-
 5 files changed, 50 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 17af4e0fd5f8..a0ecee15a6c8 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -172,7 +172,7 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static const struct iio_info ec_sensors_info = {
+static struct iio_info ec_sensors_info = {
 	.read_raw = &cros_ec_sensors_read,
 	.write_raw = &cros_ec_sensors_write,
 };
@@ -195,11 +195,11 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, &ec_sensors_info,
+					true);
 	if (ret)
 		return ret;
 
-	indio_dev->info = &ec_sensors_info;
 	state = iio_priv(indio_dev);
 	for (channel = state->channels, i = CROS_EC_SENSOR_X;
 	     i < CROS_EC_SENSOR_MAX_AXIS; i++, channel++) {
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index d5c8b4714ad6..2c2a608a10ec 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -10,6 +10,7 @@
 #include <linux/iio/buffer.h>
 #include <linux/iio/common/cros_ec_sensors_core.h>
 #include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/kernel.h>
@@ -97,8 +98,42 @@ static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
 	return ret;
 }
 
+/**
+ * cros_ec_sensors_read_freq() - sysfs function to get available frequencies
+ * @dev: Device structure for this device.
+ * @attr: Description of the attribute.
+ * @buf: Incoming string
+ *
+ * The later modes are only relevant to the ring buffer - and depend on current
+ * mode. Note that data sheet gives rather wide tolerances for these so integer
+ * division will give good enough answer and not all chips have them specified
+ * at all.
+ **/
+static ssize_t cros_ec_sensors_read_freq(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "[ %d 1 %d ]\n", state->min_freq,
+			state->max_freq);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(cros_ec_sensors_read_freq);
+
+static struct attribute *cros_ec_sensors_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group cros_ec_sensors_attribute_group = {
+	.attrs = cros_ec_sensors_attributes,
+};
+
 int cros_ec_sensors_core_init(struct platform_device *pdev,
 			      struct iio_dev *indio_dev,
+			      struct iio_info *info,
 			      bool physical_device)
 {
 	struct device *dev = &pdev->dev;
@@ -164,6 +199,9 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 		}
 	}
 
+	info->attrs = &cros_ec_sensors_attribute_group;
+	indio_dev->info = info;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 308ee6ff2e22..1772e339cf14 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -161,7 +161,7 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static const struct iio_info cros_ec_light_prox_info = {
+static struct iio_info cros_ec_light_prox_info = {
 	.read_raw = &cros_ec_light_prox_read,
 	.write_raw = &cros_ec_light_prox_write,
 };
@@ -184,11 +184,11 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev,
+					&cros_ec_light_prox_info, true);
 	if (ret)
 		return ret;
 
-	indio_dev->info = &cros_ec_light_prox_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
 	state->core.loc = state->core.resp->info.location;
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 034ce98d6e97..cd3be0f16226 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -107,7 +107,7 @@ static int cros_ec_baro_write(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static const struct iio_info cros_ec_baro_info = {
+static struct iio_info cros_ec_baro_info = {
 	.read_raw = &cros_ec_baro_read,
 	.write_raw = &cros_ec_baro_write,
 };
@@ -130,11 +130,11 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, &cros_ec_baro_info,
+					true);
 	if (ret)
 		return ret;
 
-	indio_dev->info = &cros_ec_baro_info;
 	state = iio_priv(indio_dev);
 	state->core.type = state->core.resp->info.type;
 	state->core.loc = state->core.resp->info.location;
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 4742a9637a85..7052cfb5884a 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -117,12 +117,14 @@ struct platform_device;
  * cros_ec_sensors_core_init() - basic initialization of the core structure
  * @pdev:		platform device created for the sensors
  * @indio_dev:		iio device structure of the device
+ * @info:		iio info structure with read and write callback
  * @physical_device:	true if the device refers to a physical device
  *
  * Return: 0 on success, -errno on failure.
  */
 int cros_ec_sensors_core_init(struct platform_device *pdev,
-			      struct iio_dev *indio_dev, bool physical_device);
+			      struct iio_dev *indio_dev, struct iio_info *info,
+			      bool physical_device);
 
 /**
  * cros_ec_sensors_capture() - the trigger handler function
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH 3/3] docs: iio: add precision about sampling_frequency_available
  2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
  2019-05-22 14:09 ` [PATCH 2/3] iio: common: cros_ec_sensors: add sysfs attribute for frequencies Fabien Lahoudere
@ 2019-05-22 14:09 ` Fabien Lahoudere
  2019-05-22 19:10 ` [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Gwendal Grignou
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 8+ messages in thread
From: Fabien Lahoudere @ 2019-05-22 14:09 UTC (permalink / raw)
  Cc: kernel, Fabien Lahoudere, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, Benson Leung,
	Enric Balletbo i Serra, Guenter Roeck, Lee Jones,
	Gwendal Grignou, linux-iio, linux-kernel

The documentation give some exemple on what format can be expected
from sampling_frequency_available sysfs attribute

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
---
 Documentation/ABI/testing/sysfs-bus-iio | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 6aef7dbbde44..680451695422 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -61,8 +61,11 @@ What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		When the internal sampling clock can only take a small
-		discrete set of values, this file lists those available.
+		When the internal sampling clock can only take a specific set of
+		frequencies, we can specify the available values with:
+		- a small discrete set of values like "0 2 4 6 8"
+		- a range with minimum, step and maximum frequencies like
+		  "[min step max]"
 
 What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio
 KernelVersion:	2.6.38
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
  2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
  2019-05-22 14:09 ` [PATCH 2/3] iio: common: cros_ec_sensors: add sysfs attribute for frequencies Fabien Lahoudere
  2019-05-22 14:09 ` [PATCH 3/3] docs: iio: add precision about sampling_frequency_available Fabien Lahoudere
@ 2019-05-22 19:10 ` Gwendal Grignou
  2019-05-22 19:18 ` Benson Leung
  2019-06-03 12:55 ` Lee Jones
  4 siblings, 0 replies; 8+ messages in thread
From: Gwendal Grignou @ 2019-05-22 19:10 UTC (permalink / raw)
  To: Fabien Lahoudere
  Cc: kernel, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Benson Leung, Enric Balletbo i Serra,
	Guenter Roeck, Lee Jones, linux-iio, linux-kernel

Remove CROS_EC_FIFO_SIZE and "u32 fifo_max_event_count;" from the
driver/iio/ code. This code is for a driver - cros-ec-sensor-ring -
that is not upstreamable. [see
http://lkml.iu.edu/hypermail/linux/kernel/1607.2/01335.html]. The EC
interface is fine though, we are working on a new version of the
driver that can be merged.

Gwendal.

On Wed, May 22, 2019 at 7:10 AM Fabien Lahoudere
<fabien.lahoudere@collabora.com> wrote:
>
> Version 3 of the EC protocol provides min and max frequencies and fifo
> size for EC sensors.
>
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
> ---
>  .../cros_ec_sensors/cros_ec_sensors_core.c    | 98 ++++++++++++++++++-
>  .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
>  include/linux/mfd/cros_ec_commands.h          | 21 ++++
>  3 files changed, 125 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..d5c8b4714ad6 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -19,12 +19,84 @@
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>
> +/*
> + * Hard coded to the first device to support sensor fifo.  The EC has a 2048
> + * byte fifo and will trigger an interrupt when fifo is 2/3 full.
> + */
> +#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
> +
>  static char *cros_ec_loc[] = {
>         [MOTIONSENSE_LOC_BASE] = "base",
>         [MOTIONSENSE_LOC_LID] = "lid",
>         [MOTIONSENSE_LOC_MAX] = "unknown",
>  };
>
> +static void get_default_min_max_freq_and_fifo_size(enum motionsensor_type type,
> +                                                  u32 *min_freq,
> +                                                  u32 *max_freq,
> +                                                  u32 *max_fifo_events)
> +{
> +       /* we don't know fifo size, set to size previously used by sensor HAL */
> +       *max_fifo_events = CROS_EC_FIFO_SIZE;
> +
> +       switch (type) {
> +       case MOTIONSENSE_TYPE_ACCEL:
> +       case MOTIONSENSE_TYPE_GYRO:
> +               *min_freq = 12500;
> +               *max_freq = 100000;
> +               break;
> +       case MOTIONSENSE_TYPE_MAG:
> +               *min_freq = 5000;
> +               *max_freq = 25000;
> +               break;
> +       case MOTIONSENSE_TYPE_PROX:
> +       case MOTIONSENSE_TYPE_LIGHT:
> +               *min_freq = 100;
> +               *max_freq = 50000;
> +               break;
> +       case MOTIONSENSE_TYPE_BARO:
> +               *min_freq = 250;
> +               *max_freq = 20000;
> +               break;
> +       case MOTIONSENSE_TYPE_ACTIVITY:
> +       default:
> +               *max_fifo_events = 0;
> +               *min_freq = 0;
> +               *max_freq = 0;
> +               break;
> +       }
> +}
> +
> +static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
> +                                            u16 cmd_offset, u16 cmd, u32 *mask)
> +{
> +       struct {
> +               struct cros_ec_command msg;
> +               union {
> +                       struct ec_params_get_cmd_versions params;
> +                       struct ec_response_get_cmd_versions resp;
> +               };
> +       } __packed buf;
> +       struct ec_params_get_cmd_versions *params = &buf.params;
> +       struct ec_response_get_cmd_versions *resp = &buf.resp;
> +       struct cros_ec_command *msg = &buf.msg;
> +       int ret;
> +
> +       memset(&buf, 0, sizeof(buf));
> +       msg->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
> +       msg->insize = sizeof(*resp);
> +       msg->outsize = sizeof(*params);
> +       params->cmd = cmd;
> +       ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> +       if (ret >= 0) {
> +               if (msg->result == EC_RES_SUCCESS)
> +                       *mask = resp->version_mask;
> +               else
> +                       *mask = 0;
> +       }
> +       return ret;
> +}
> +
>  int cros_ec_sensors_core_init(struct platform_device *pdev,
>                               struct iio_dev *indio_dev,
>                               bool physical_device)
> @@ -33,6 +105,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>         struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
>         struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
>         struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> +       u32 ver_mask;
> +       int ret;
>
>         platform_set_drvdata(pdev, indio_dev);
>
> @@ -47,8 +121,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>
>         mutex_init(&state->cmd_lock);
>
> +       /* determine what version of MOTIONSENSE CMD EC has */
> +       ret = cros_ec_get_host_cmd_version_mask(state->ec,
> +                                               ec->cmd_offset,
> +                                               EC_CMD_MOTION_SENSE_CMD,
> +                                               &ver_mask);
> +       if (ret < 0 || ver_mask == 0)
> +               return -ENODEV;
> +
>         /* Set up the host command structure. */
> -       state->msg->version = 2;
> +       state->msg->version = fls(ver_mask) - 1;
>         state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
>         state->msg->outsize = sizeof(struct ec_params_motion_sense);
>
> @@ -66,6 +148,20 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>                 }
>                 state->type = state->resp->info.type;
>                 state->loc = state->resp->info.location;
> +               if (state->msg->version < 3) {
> +                       get_default_min_max_freq_and_fifo_size(
> +                                       state->resp->info.type,
> +                                       &state->min_freq,
> +                                       &state->max_freq,
> +                                       &state->fifo_max_event_count);
> +               } else {
> +                       state->min_freq =
> +                               state->resp->info_3.min_frequency;
> +                       state->max_freq =
> +                               state->resp->info_3.max_frequency;
> +                       state->fifo_max_event_count =
> +                               state->resp->info_3.fifo_max_event_count;
> +               }
>         }
>
>         return 0;
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..4742a9637a85 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -78,6 +78,13 @@ struct cros_ec_sensors_core_state {
>                                     unsigned long scan_mask, s16 *data);
>
>         int curr_sampl_freq;
> +
> +       /* Min and Max Sampling Frequency in mHz */
> +       u32 min_freq;
> +       u32 max_freq;
> +
> +       /* event fifo size represented in number of events */
> +       u32 fifo_max_event_count;
>  };
>
>  /**
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index dcec96f01879..27d71cbf22f1 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -1744,6 +1744,27 @@ struct ec_response_motion_sense {
>                         uint8_t chip;
>                 } info;
>
> +               /* Used for MOTIONSENSE_CMD_INFO version 3 */
> +               struct __ec_todo_unpacked {
> +                       /* Should be element of enum motionsensor_type. */
> +                       uint8_t type;
> +
> +                       /* Should be element of enum motionsensor_location. */
> +                       uint8_t location;
> +
> +                       /* Should be element of enum motionsensor_chip. */
> +                       uint8_t chip;
> +
> +                       /* Minimum sensor sampling frequency */
> +                       uint32_t min_frequency;
> +
> +                       /* Maximum sensor sampling frequency */
> +                       uint32_t max_frequency;
> +
> +                       /* Max number of sensor events that could be in fifo */
> +                       uint32_t fifo_max_event_count;
> +               } info_3;
> +
>                 /* Used for MOTIONSENSE_CMD_DATA */
>                 struct ec_response_motion_sensor_data data;
>
> --
> 2.20.1
>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
  2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
                   ` (2 preceding siblings ...)
  2019-05-22 19:10 ` [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Gwendal Grignou
@ 2019-05-22 19:18 ` Benson Leung
  2019-06-03 12:55 ` Lee Jones
  4 siblings, 0 replies; 8+ messages in thread
From: Benson Leung @ 2019-05-22 19:18 UTC (permalink / raw)
  To: Fabien Lahoudere, Nick Vaccaro
  Cc: kernel, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Benson Leung, Enric Balletbo i Serra,
	Guenter Roeck, Lee Jones, Gwendal Grignou, linux-iio,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 7295 bytes --]

Hi Fabien,

On Wed, May 22, 2019 at 04:09:52PM +0200, Fabien Lahoudere wrote:
> Version 3 of the EC protocol provides min and max frequencies and fifo
> size for EC sensors.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>

It looks like this is mainly based on patches from the chromium kernel:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/490495
and a subsequent revert of a revert:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/529686

originally by Nick Vaccaro <nvaccaro@chromium.org>.
Please put links to that original work here, and include Nick in the
Signed-off-by. Also, don't forget to CC him when posting to the list.

Thanks,
Benson

> ---
>  .../cros_ec_sensors/cros_ec_sensors_core.c    | 98 ++++++++++++++++++-
>  .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
>  include/linux/mfd/cros_ec_commands.h          | 21 ++++
>  3 files changed, 125 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..d5c8b4714ad6 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -19,12 +19,84 @@
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  
> +/*
> + * Hard coded to the first device to support sensor fifo.  The EC has a 2048
> + * byte fifo and will trigger an interrupt when fifo is 2/3 full.
> + */
> +#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
> +
>  static char *cros_ec_loc[] = {
>  	[MOTIONSENSE_LOC_BASE] = "base",
>  	[MOTIONSENSE_LOC_LID] = "lid",
>  	[MOTIONSENSE_LOC_MAX] = "unknown",
>  };
>  
> +static void get_default_min_max_freq_and_fifo_size(enum motionsensor_type type,
> +						   u32 *min_freq,
> +						   u32 *max_freq,
> +						   u32 *max_fifo_events)
> +{
> +	/* we don't know fifo size, set to size previously used by sensor HAL */
> +	*max_fifo_events = CROS_EC_FIFO_SIZE;
> +
> +	switch (type) {
> +	case MOTIONSENSE_TYPE_ACCEL:
> +	case MOTIONSENSE_TYPE_GYRO:
> +		*min_freq = 12500;
> +		*max_freq = 100000;
> +		break;
> +	case MOTIONSENSE_TYPE_MAG:
> +		*min_freq = 5000;
> +		*max_freq = 25000;
> +		break;
> +	case MOTIONSENSE_TYPE_PROX:
> +	case MOTIONSENSE_TYPE_LIGHT:
> +		*min_freq = 100;
> +		*max_freq = 50000;
> +		break;
> +	case MOTIONSENSE_TYPE_BARO:
> +		*min_freq = 250;
> +		*max_freq = 20000;
> +		break;
> +	case MOTIONSENSE_TYPE_ACTIVITY:
> +	default:
> +		*max_fifo_events = 0;
> +		*min_freq = 0;
> +		*max_freq = 0;
> +		break;
> +	}
> +}
> +
> +static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
> +					     u16 cmd_offset, u16 cmd, u32 *mask)
> +{
> +	struct {
> +		struct cros_ec_command msg;
> +		union {
> +			struct ec_params_get_cmd_versions params;
> +			struct ec_response_get_cmd_versions resp;
> +		};
> +	} __packed buf;
> +	struct ec_params_get_cmd_versions *params = &buf.params;
> +	struct ec_response_get_cmd_versions *resp = &buf.resp;
> +	struct cros_ec_command *msg = &buf.msg;
> +	int ret;
> +
> +	memset(&buf, 0, sizeof(buf));
> +	msg->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
> +	msg->insize = sizeof(*resp);
> +	msg->outsize = sizeof(*params);
> +	params->cmd = cmd;
> +	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> +	if (ret >= 0) {
> +		if (msg->result == EC_RES_SUCCESS)
> +			*mask = resp->version_mask;
> +		else
> +			*mask = 0;
> +	}
> +	return ret;
> +}
> +
>  int cros_ec_sensors_core_init(struct platform_device *pdev,
>  			      struct iio_dev *indio_dev,
>  			      bool physical_device)
> @@ -33,6 +105,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
>  	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
>  	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> +	u32 ver_mask;
> +	int ret;
>  
>  	platform_set_drvdata(pdev, indio_dev);
>  
> @@ -47,8 +121,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  
>  	mutex_init(&state->cmd_lock);
>  
> +	/* determine what version of MOTIONSENSE CMD EC has */
> +	ret = cros_ec_get_host_cmd_version_mask(state->ec,
> +						ec->cmd_offset,
> +						EC_CMD_MOTION_SENSE_CMD,
> +						&ver_mask);
> +	if (ret < 0 || ver_mask == 0)
> +		return -ENODEV;
> +
>  	/* Set up the host command structure. */
> -	state->msg->version = 2;
> +	state->msg->version = fls(ver_mask) - 1;
>  	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
>  	state->msg->outsize = sizeof(struct ec_params_motion_sense);
>  
> @@ -66,6 +148,20 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  		}
>  		state->type = state->resp->info.type;
>  		state->loc = state->resp->info.location;
> +		if (state->msg->version < 3) {
> +			get_default_min_max_freq_and_fifo_size(
> +					state->resp->info.type,
> +					&state->min_freq,
> +					&state->max_freq,
> +					&state->fifo_max_event_count);
> +		} else {
> +			state->min_freq =
> +				state->resp->info_3.min_frequency;
> +			state->max_freq =
> +				state->resp->info_3.max_frequency;
> +			state->fifo_max_event_count =
> +				state->resp->info_3.fifo_max_event_count;
> +		}
>  	}
>  
>  	return 0;
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..4742a9637a85 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -78,6 +78,13 @@ struct cros_ec_sensors_core_state {
>  				    unsigned long scan_mask, s16 *data);
>  
>  	int curr_sampl_freq;
> +
> +	/* Min and Max Sampling Frequency in mHz */
> +	u32 min_freq;
> +	u32 max_freq;
> +
> +	/* event fifo size represented in number of events */
> +	u32 fifo_max_event_count;
>  };
>  
>  /**
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index dcec96f01879..27d71cbf22f1 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -1744,6 +1744,27 @@ struct ec_response_motion_sense {
>  			uint8_t chip;
>  		} info;
>  
> +		/* Used for MOTIONSENSE_CMD_INFO version 3 */
> +		struct __ec_todo_unpacked {
> +			/* Should be element of enum motionsensor_type. */
> +			uint8_t type;
> +
> +			/* Should be element of enum motionsensor_location. */
> +			uint8_t location;
> +
> +			/* Should be element of enum motionsensor_chip. */
> +			uint8_t chip;
> +
> +			/* Minimum sensor sampling frequency */
> +			uint32_t min_frequency;
> +
> +			/* Maximum sensor sampling frequency */
> +			uint32_t max_frequency;
> +
> +			/* Max number of sensor events that could be in fifo */
> +			uint32_t fifo_max_event_count;
> +		} info_3;
> +
>  		/* Used for MOTIONSENSE_CMD_DATA */
>  		struct ec_response_motion_sensor_data data;
>  
> -- 
> 2.20.1
> 

-- 
Benson Leung
Staff Software Engineer
Chrome OS Kernel
Google Inc.
bleung@google.com
Chromium OS Project
bleung@chromium.org

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
  2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
                   ` (3 preceding siblings ...)
  2019-05-22 19:18 ` Benson Leung
@ 2019-06-03 12:55 ` Lee Jones
  2019-06-04 14:15   ` Fabien Lahoudere
  4 siblings, 1 reply; 8+ messages in thread
From: Lee Jones @ 2019-06-03 12:55 UTC (permalink / raw)
  To: Fabien Lahoudere
  Cc: kernel, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Benson Leung, Enric Balletbo i Serra,
	Guenter Roeck, Gwendal Grignou, linux-iio, linux-kernel

On Wed, 22 May 2019, Fabien Lahoudere wrote:

> Version 3 of the EC protocol provides min and max frequencies and fifo
> size for EC sensors.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
> ---
>  .../cros_ec_sensors/cros_ec_sensors_core.c    | 98 ++++++++++++++++++-
>  .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
>  include/linux/mfd/cros_ec_commands.h          | 21 ++++

Please note that we are about to add a pretty bit update for this
file.  Once it's complete you may wish to rebase in order to avoid
any possible merge conflicts.

>  3 files changed, 125 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..d5c8b4714ad6 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -19,12 +19,84 @@
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  
> +/*
> + * Hard coded to the first device to support sensor fifo.  The EC has a 2048
> + * byte fifo and will trigger an interrupt when fifo is 2/3 full.
> + */
> +#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
> +
>  static char *cros_ec_loc[] = {
>  	[MOTIONSENSE_LOC_BASE] = "base",
>  	[MOTIONSENSE_LOC_LID] = "lid",
>  	[MOTIONSENSE_LOC_MAX] = "unknown",
>  };
>  
> +static void get_default_min_max_freq_and_fifo_size(enum motionsensor_type type,
> +						   u32 *min_freq,
> +						   u32 *max_freq,
> +						   u32 *max_fifo_events)
> +{
> +	/* we don't know fifo size, set to size previously used by sensor HAL */
> +	*max_fifo_events = CROS_EC_FIFO_SIZE;
> +
> +	switch (type) {
> +	case MOTIONSENSE_TYPE_ACCEL:
> +	case MOTIONSENSE_TYPE_GYRO:
> +		*min_freq = 12500;
> +		*max_freq = 100000;
> +		break;
> +	case MOTIONSENSE_TYPE_MAG:
> +		*min_freq = 5000;
> +		*max_freq = 25000;
> +		break;
> +	case MOTIONSENSE_TYPE_PROX:
> +	case MOTIONSENSE_TYPE_LIGHT:
> +		*min_freq = 100;
> +		*max_freq = 50000;
> +		break;
> +	case MOTIONSENSE_TYPE_BARO:
> +		*min_freq = 250;
> +		*max_freq = 20000;
> +		break;
> +	case MOTIONSENSE_TYPE_ACTIVITY:
> +	default:
> +		*max_fifo_events = 0;
> +		*min_freq = 0;
> +		*max_freq = 0;
> +		break;
> +	}
> +}
> +
> +static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
> +					     u16 cmd_offset, u16 cmd, u32 *mask)
> +{
> +	struct {
> +		struct cros_ec_command msg;
> +		union {
> +			struct ec_params_get_cmd_versions params;
> +			struct ec_response_get_cmd_versions resp;
> +		};
> +	} __packed buf;
> +	struct ec_params_get_cmd_versions *params = &buf.params;
> +	struct ec_response_get_cmd_versions *resp = &buf.resp;
> +	struct cros_ec_command *msg = &buf.msg;
> +	int ret;
> +
> +	memset(&buf, 0, sizeof(buf));
> +	msg->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
> +	msg->insize = sizeof(*resp);
> +	msg->outsize = sizeof(*params);
> +	params->cmd = cmd;
> +	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> +	if (ret >= 0) {
> +		if (msg->result == EC_RES_SUCCESS)
> +			*mask = resp->version_mask;
> +		else
> +			*mask = 0;
> +	}
> +	return ret;
> +}
> +
>  int cros_ec_sensors_core_init(struct platform_device *pdev,
>  			      struct iio_dev *indio_dev,
>  			      bool physical_device)
> @@ -33,6 +105,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
>  	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
>  	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> +	u32 ver_mask;
> +	int ret;
>  
>  	platform_set_drvdata(pdev, indio_dev);
>  
> @@ -47,8 +121,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  
>  	mutex_init(&state->cmd_lock);
>  
> +	/* determine what version of MOTIONSENSE CMD EC has */
> +	ret = cros_ec_get_host_cmd_version_mask(state->ec,
> +						ec->cmd_offset,
> +						EC_CMD_MOTION_SENSE_CMD,
> +						&ver_mask);
> +	if (ret < 0 || ver_mask == 0)
> +		return -ENODEV;
> +
>  	/* Set up the host command structure. */
> -	state->msg->version = 2;
> +	state->msg->version = fls(ver_mask) - 1;
>  	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
>  	state->msg->outsize = sizeof(struct ec_params_motion_sense);
>  
> @@ -66,6 +148,20 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>  		}
>  		state->type = state->resp->info.type;
>  		state->loc = state->resp->info.location;
> +		if (state->msg->version < 3) {
> +			get_default_min_max_freq_and_fifo_size(
> +					state->resp->info.type,
> +					&state->min_freq,
> +					&state->max_freq,
> +					&state->fifo_max_event_count);
> +		} else {
> +			state->min_freq =
> +				state->resp->info_3.min_frequency;
> +			state->max_freq =
> +				state->resp->info_3.max_frequency;
> +			state->fifo_max_event_count =
> +				state->resp->info_3.fifo_max_event_count;
> +		}
>  	}
>  
>  	return 0;
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..4742a9637a85 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -78,6 +78,13 @@ struct cros_ec_sensors_core_state {
>  				    unsigned long scan_mask, s16 *data);
>  
>  	int curr_sampl_freq;
> +
> +	/* Min and Max Sampling Frequency in mHz */
> +	u32 min_freq;
> +	u32 max_freq;
> +
> +	/* event fifo size represented in number of events */
> +	u32 fifo_max_event_count;
>  };
>  
>  /**
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index dcec96f01879..27d71cbf22f1 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -1744,6 +1744,27 @@ struct ec_response_motion_sense {
>  			uint8_t chip;
>  		} info;
>  
> +		/* Used for MOTIONSENSE_CMD_INFO version 3 */
> +		struct __ec_todo_unpacked {
> +			/* Should be element of enum motionsensor_type. */
> +			uint8_t type;
> +
> +			/* Should be element of enum motionsensor_location. */
> +			uint8_t location;
> +
> +			/* Should be element of enum motionsensor_chip. */
> +			uint8_t chip;
> +
> +			/* Minimum sensor sampling frequency */
> +			uint32_t min_frequency;
> +
> +			/* Maximum sensor sampling frequency */
> +			uint32_t max_frequency;
> +
> +			/* Max number of sensor events that could be in fifo */
> +			uint32_t fifo_max_event_count;
> +		} info_3;
> +
>  		/* Used for MOTIONSENSE_CMD_DATA */
>  		struct ec_response_motion_sensor_data data;
>  

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
  2019-06-03 12:55 ` Lee Jones
@ 2019-06-04 14:15   ` Fabien Lahoudere
  2019-06-04 18:03     ` Lee Jones
  0 siblings, 1 reply; 8+ messages in thread
From: Fabien Lahoudere @ 2019-06-04 14:15 UTC (permalink / raw)
  To: Lee Jones
  Cc: kernel, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Benson Leung, Enric Balletbo i Serra,
	Guenter Roeck, Gwendal Grignou, linux-iio, linux-kernel

Le lundi 03 juin 2019 à 13:55 +0100, Lee Jones a écrit :
> On Wed, 22 May 2019, Fabien Lahoudere wrote:
> 
> > Version 3 of the EC protocol provides min and max frequencies and
> > fifo
> > size for EC sensors.
> > 
> > Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
> > ---
> >  .../cros_ec_sensors/cros_ec_sensors_core.c    | 98
> > ++++++++++++++++++-
> >  .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
> >  include/linux/mfd/cros_ec_commands.h          | 21 ++++
> 
> Please note that we are about to add a pretty bit update for this
> file.  Once it's complete you may wish to rebase in order to avoid
> any possible merge conflicts.
> 

Thanks Lee. Indeed I see and reviewed this 30 patches series.
I am waiting they are applied to rebase ans submit v3.

> >  3 files changed, 125 insertions(+), 1 deletion(-)
> > 
> > diff --git
> > a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > index 719a0df5aeeb..d5c8b4714ad6 100644
> > --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > @@ -19,12 +19,84 @@
> >  #include <linux/slab.h>
> >  #include <linux/platform_device.h>
> >  
> > +/*
> > + * Hard coded to the first device to support sensor fifo.  The EC
> > has a 2048
> > + * byte fifo and will trigger an interrupt when fifo is 2/3 full.
> > + */
> > +#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
> > +
> >  static char *cros_ec_loc[] = {
> >  	[MOTIONSENSE_LOC_BASE] = "base",
> >  	[MOTIONSENSE_LOC_LID] = "lid",
> >  	[MOTIONSENSE_LOC_MAX] = "unknown",
> >  };
> >  
> > +static void get_default_min_max_freq_and_fifo_size(enum
> > motionsensor_type type,
> > +						   u32 *min_freq,
> > +						   u32 *max_freq,
> > +						   u32
> > *max_fifo_events)
> > +{
> > +	/* we don't know fifo size, set to size previously used by
> > sensor HAL */
> > +	*max_fifo_events = CROS_EC_FIFO_SIZE;
> > +
> > +	switch (type) {
> > +	case MOTIONSENSE_TYPE_ACCEL:
> > +	case MOTIONSENSE_TYPE_GYRO:
> > +		*min_freq = 12500;
> > +		*max_freq = 100000;
> > +		break;
> > +	case MOTIONSENSE_TYPE_MAG:
> > +		*min_freq = 5000;
> > +		*max_freq = 25000;
> > +		break;
> > +	case MOTIONSENSE_TYPE_PROX:
> > +	case MOTIONSENSE_TYPE_LIGHT:
> > +		*min_freq = 100;
> > +		*max_freq = 50000;
> > +		break;
> > +	case MOTIONSENSE_TYPE_BARO:
> > +		*min_freq = 250;
> > +		*max_freq = 20000;
> > +		break;
> > +	case MOTIONSENSE_TYPE_ACTIVITY:
> > +	default:
> > +		*max_fifo_events = 0;
> > +		*min_freq = 0;
> > +		*max_freq = 0;
> > +		break;
> > +	}
> > +}
> > +
> > +static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device
> > *ec_dev,
> > +					     u16 cmd_offset, u16 cmd,
> > u32 *mask)
> > +{
> > +	struct {
> > +		struct cros_ec_command msg;
> > +		union {
> > +			struct ec_params_get_cmd_versions params;
> > +			struct ec_response_get_cmd_versions resp;
> > +		};
> > +	} __packed buf;
> > +	struct ec_params_get_cmd_versions *params = &buf.params;
> > +	struct ec_response_get_cmd_versions *resp = &buf.resp;
> > +	struct cros_ec_command *msg = &buf.msg;
> > +	int ret;
> > +
> > +	memset(&buf, 0, sizeof(buf));
> > +	msg->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
> > +	msg->insize = sizeof(*resp);
> > +	msg->outsize = sizeof(*params);
> > +	params->cmd = cmd;
> > +	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
> > +	if (ret >= 0) {
> > +		if (msg->result == EC_RES_SUCCESS)
> > +			*mask = resp->version_mask;
> > +		else
> > +			*mask = 0;
> > +	}
> > +	return ret;
> > +}
> > +
> >  int cros_ec_sensors_core_init(struct platform_device *pdev,
> >  			      struct iio_dev *indio_dev,
> >  			      bool physical_device)
> > @@ -33,6 +105,8 @@ int cros_ec_sensors_core_init(struct
> > platform_device *pdev,
> >  	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
> >  	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
> >  	struct cros_ec_sensor_platform *sensor_platform =
> > dev_get_platdata(dev);
> > +	u32 ver_mask;
> > +	int ret;
> >  
> >  	platform_set_drvdata(pdev, indio_dev);
> >  
> > @@ -47,8 +121,16 @@ int cros_ec_sensors_core_init(struct
> > platform_device *pdev,
> >  
> >  	mutex_init(&state->cmd_lock);
> >  
> > +	/* determine what version of MOTIONSENSE CMD EC has */
> > +	ret = cros_ec_get_host_cmd_version_mask(state->ec,
> > +						ec->cmd_offset,
> > +						EC_CMD_MOTION_SENSE_CMD
> > ,
> > +						&ver_mask);
> > +	if (ret < 0 || ver_mask == 0)
> > +		return -ENODEV;
> > +
> >  	/* Set up the host command structure. */
> > -	state->msg->version = 2;
> > +	state->msg->version = fls(ver_mask) - 1;
> >  	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
> >  	state->msg->outsize = sizeof(struct ec_params_motion_sense);
> >  
> > @@ -66,6 +148,20 @@ int cros_ec_sensors_core_init(struct
> > platform_device *pdev,
> >  		}
> >  		state->type = state->resp->info.type;
> >  		state->loc = state->resp->info.location;
> > +		if (state->msg->version < 3) {
> > +			get_default_min_max_freq_and_fifo_size(
> > +					state->resp->info.type,
> > +					&state->min_freq,
> > +					&state->max_freq,
> > +					&state->fifo_max_event_count);
> > +		} else {
> > +			state->min_freq =
> > +				state->resp->info_3.min_frequency;
> > +			state->max_freq =
> > +				state->resp->info_3.max_frequency;
> > +			state->fifo_max_event_count =
> > +				state->resp-
> > >info_3.fifo_max_event_count;
> > +		}
> >  	}
> >  
> >  	return 0;
> > diff --git a/include/linux/iio/common/cros_ec_sensors_core.h
> > b/include/linux/iio/common/cros_ec_sensors_core.h
> > index ce16445411ac..4742a9637a85 100644
> > --- a/include/linux/iio/common/cros_ec_sensors_core.h
> > +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> > @@ -78,6 +78,13 @@ struct cros_ec_sensors_core_state {
> >  				    unsigned long scan_mask, s16
> > *data);
> >  
> >  	int curr_sampl_freq;
> > +
> > +	/* Min and Max Sampling Frequency in mHz */
> > +	u32 min_freq;
> > +	u32 max_freq;
> > +
> > +	/* event fifo size represented in number of events */
> > +	u32 fifo_max_event_count;
> >  };
> >  
> >  /**
> > diff --git a/include/linux/mfd/cros_ec_commands.h
> > b/include/linux/mfd/cros_ec_commands.h
> > index dcec96f01879..27d71cbf22f1 100644
> > --- a/include/linux/mfd/cros_ec_commands.h
> > +++ b/include/linux/mfd/cros_ec_commands.h
> > @@ -1744,6 +1744,27 @@ struct ec_response_motion_sense {
> >  			uint8_t chip;
> >  		} info;
> >  
> > +		/* Used for MOTIONSENSE_CMD_INFO version 3 */
> > +		struct __ec_todo_unpacked {
> > +			/* Should be element of enum motionsensor_type.
> > */
> > +			uint8_t type;
> > +
> > +			/* Should be element of enum
> > motionsensor_location. */
> > +			uint8_t location;
> > +
> > +			/* Should be element of enum motionsensor_chip.
> > */
> > +			uint8_t chip;
> > +
> > +			/* Minimum sensor sampling frequency */
> > +			uint32_t min_frequency;
> > +
> > +			/* Maximum sensor sampling frequency */
> > +			uint32_t max_frequency;
> > +
> > +			/* Max number of sensor events that could be in
> > fifo */
> > +			uint32_t fifo_max_event_count;
> > +		} info_3;
> > +
> >  		/* Used for MOTIONSENSE_CMD_DATA */
> >  		struct ec_response_motion_sensor_data data;
> >  


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message
  2019-06-04 14:15   ` Fabien Lahoudere
@ 2019-06-04 18:03     ` Lee Jones
  0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2019-06-04 18:03 UTC (permalink / raw)
  To: Fabien Lahoudere
  Cc: kernel, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, Benson Leung, Enric Balletbo i Serra,
	Guenter Roeck, Gwendal Grignou, linux-iio, linux-kernel

On Tue, 04 Jun 2019, Fabien Lahoudere wrote:

> Le lundi 03 juin 2019 à 13:55 +0100, Lee Jones a écrit :
> > On Wed, 22 May 2019, Fabien Lahoudere wrote:
> > 
> > > Version 3 of the EC protocol provides min and max frequencies and
> > > fifo
> > > size for EC sensors.
> > > 
> > > Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
> > > ---
> > >  .../cros_ec_sensors/cros_ec_sensors_core.c    | 98
> > > ++++++++++++++++++-
> > >  .../linux/iio/common/cros_ec_sensors_core.h   |  7 ++
> > >  include/linux/mfd/cros_ec_commands.h          | 21 ++++
> > 
> > Please note that we are about to add a pretty bit update for this
> > file.  Once it's complete you may wish to rebase in order to avoid
> > any possible merge conflicts.
> > 
> 
> Thanks Lee. Indeed I see and reviewed this 30 patches series.
> I am waiting they are applied to rebase ans submit v3.

They are applied.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-06-04 18:03 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-22 14:09 [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Fabien Lahoudere
2019-05-22 14:09 ` [PATCH 2/3] iio: common: cros_ec_sensors: add sysfs attribute for frequencies Fabien Lahoudere
2019-05-22 14:09 ` [PATCH 3/3] docs: iio: add precision about sampling_frequency_available Fabien Lahoudere
2019-05-22 19:10 ` [PATCH 1/3] iio: common: cros_ec_sensors: support protocol v3 message Gwendal Grignou
2019-05-22 19:18 ` Benson Leung
2019-06-03 12:55 ` Lee Jones
2019-06-04 14:15   ` Fabien Lahoudere
2019-06-04 18:03     ` Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).