[PATCH] iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor

[Shobhit Kukreti <shobhitkukreti@gmail.com>]

The dht11 driver uses a single gpio to make measurements. It was
using the older global gpio numberspace. The patch replaces the
old gpio api with the new gpio descriptor based api.

Removed header files "linux/gpio.h" and "linux/of_gpio.h"

Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
---
 drivers/iio/humidity/dht11.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index c815920..f5128d8 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -22,8 +22,7 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/timekeeping.h>
 
 #include <linux/iio/iio.h>
@@ -72,7 +71,7 @@
 struct dht11 {
 	struct device			*dev;
 
-	int				gpio;
+	struct gpio_desc		*gpiod;
 	int				irq;
 
 	struct completion		completion;
@@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
 	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
 		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
 		dht11->edges[dht11->num_edges++].value =
-						gpio_get_value(dht11->gpio);
+						gpiod_get_value(dht11->gpiod);
 
 		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
 			complete(&dht11->completion);
@@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		reinit_completion(&dht11->completion);
 
 		dht11->num_edges = 0;
-		ret = gpio_direction_output(dht11->gpio, 0);
+		ret = gpiod_direction_output(dht11->gpiod, 0);
 		if (ret)
 			goto err;
 		usleep_range(DHT11_START_TRANSMISSION_MIN,
 			     DHT11_START_TRANSMISSION_MAX);
-		ret = gpio_direction_input(dht11->gpio);
+		ret = gpiod_direction_input(dht11->gpiod);
 		if (ret)
 			goto err;
 
@@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
 static int dht11_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
 	struct dht11 *dht11;
 	struct iio_dev *iio;
-	int ret;
 
 	iio = devm_iio_device_alloc(dev, sizeof(*dht11));
 	if (!iio) {
@@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
 
 	dht11 = iio_priv(iio);
 	dht11->dev = dev;
+	dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	if (IS_ERR(dht11->gpiod))
+		return PTR_ERR(dht11->gpiod);
 
-	ret = of_get_gpio(node, 0);
-	if (ret < 0)
-		return ret;
-	dht11->gpio = ret;
-	ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
-	if (ret)
-		return ret;
-
-	dht11->irq = gpio_to_irq(dht11->gpio);
+	dht11->irq = gpiod_to_irq(dht11->gpiod);
 	if (dht11->irq < 0) {
-		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
+		dev_err(dev, "GPIO %d has no interrupt\n", desc_to_gpio(dht11->gpiod));
 		return -EINVAL;
 	}
 
-- 
2.7.4