Re: [PATCH] iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor

[Harald Geyer <harald@ccbib.org>]

Shobhit Kukreti writes:
> The dht11 driver uses a single gpio to make measurements. It was
> using the older global gpio numberspace. The patch replaces the
> old gpio api with the new gpio descriptor based api.
> 
> Removed header files "linux/gpio.h" and "linux/of_gpio.h"
>
> Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>

Acked-by: Harald Geyer <harald@ccbib.org>

> ---
>  drivers/iio/humidity/dht11.c | 28 ++++++++++------------------
>  1 file changed, 10 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
> index c815920..f5128d8 100644
> --- a/drivers/iio/humidity/dht11.c
> +++ b/drivers/iio/humidity/dht11.c
> @@ -22,8 +22,7 @@
>  #include <linux/completion.h>
>  #include <linux/mutex.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> -#include <linux/of_gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/timekeeping.h>
>  
>  #include <linux/iio/iio.h>
> @@ -72,7 +71,7 @@
>  struct dht11 {
>  	struct device			*dev;
>  
> -	int				gpio;
> +	struct gpio_desc		*gpiod;
>  	int				irq;
>  
>  	struct completion		completion;
> @@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
>  	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
>  		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
>  		dht11->edges[dht11->num_edges++].value =
> -						gpio_get_value(dht11->gpio);
> +						gpiod_get_value(dht11->gpiod);
>  
>  		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
>  			complete(&dht11->completion);
> @@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
>  		reinit_completion(&dht11->completion);
>  
>  		dht11->num_edges = 0;
> -		ret = gpio_direction_output(dht11->gpio, 0);
> +		ret = gpiod_direction_output(dht11->gpiod, 0);
>  		if (ret)
>  			goto err;
>  		usleep_range(DHT11_START_TRANSMISSION_MIN,
>  			     DHT11_START_TRANSMISSION_MAX);
> -		ret = gpio_direction_input(dht11->gpio);
> +		ret = gpiod_direction_input(dht11->gpiod);
>  		if (ret)
>  			goto err;
>  
> @@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
>  static int dht11_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> -	struct device_node *node = dev->of_node;
>  	struct dht11 *dht11;
>  	struct iio_dev *iio;
> -	int ret;
>  
>  	iio = devm_iio_device_alloc(dev, sizeof(*dht11));
>  	if (!iio) {
> @@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
>  
>  	dht11 = iio_priv(iio);
>  	dht11->dev = dev;
> +	dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
> +	if (IS_ERR(dht11->gpiod))
> +		return PTR_ERR(dht11->gpiod);
>  
> -	ret = of_get_gpio(node, 0);
> -	if (ret < 0)
> -		return ret;
> -	dht11->gpio = ret;
> -	ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
> -	if (ret)
> -		return ret;
> -
> -	dht11->irq = gpio_to_irq(dht11->gpio);
> +	dht11->irq = gpiod_to_irq(dht11->gpiod);
>  	if (dht11->irq < 0) {
> -		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
> +		dev_err(dev, "GPIO %d has no interrupt\n", desc_to_gpio(dht11->gpiod));
>  		return -EINVAL;
>  	}
>  
> -- 
> 2.7.4
> 

-- 
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via CLAM to xASPBtezLNqj4cUe8MT5nZjthRSEjrRQXN
or via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w