From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Sean Nyekjaer <sean@geanix.com>
Cc: linux-iio@vger.kernel.org, jic23@kernel.org,
lorenzo.bianconi83@gmail.com, martin@geanix.com
Subject: Re: [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
Date: Tue, 18 Jun 2019 17:57:06 +0200 [thread overview]
Message-ID: <20190618155705.GA22268@localhost.localdomain> (raw)
In-Reply-To: <20190618125939.105903-2-sean@geanix.com>
[-- Attachment #1: Type: text/plain, Size: 8713 bytes --]
> This prepares the interrupt to be used for other stuff than
> fifo reading -> event readings.
>
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 1 +
> .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 80 +----------------
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 87 +++++++++++++++++++
> 3 files changed, 90 insertions(+), 78 deletions(-)
>
I can't see why we need this patch
Regards,
Lorenzo
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index edcd838037cd..a5e373680e9c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -175,5 +175,6 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
> int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
> int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
> enum st_lsm6dsx_fifo_mode fifo_mode);
> +int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
>
> #endif /* ST_LSM6DSX_H */
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index 631360b14ca7..a1ed61a64a64 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -25,8 +25,6 @@
> * Licensed under the GPL-2.
> */
> #include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> #include <linux/iio/kfifo_buf.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/buffer.h>
> @@ -37,10 +35,6 @@
>
> #include "st_lsm6dsx.h"
>
> -#define ST_LSM6DSX_REG_HLACTIVE_ADDR 0x12
> -#define ST_LSM6DSX_REG_HLACTIVE_MASK BIT(5)
> -#define ST_LSM6DSX_REG_PP_OD_ADDR 0x12
> -#define ST_LSM6DSX_REG_PP_OD_MASK BIT(4)
> #define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a
> #define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0)
> #define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3)
> @@ -282,7 +276,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 *data,
> *
> * Return: Number of bytes read from the FIFO
> */
> -static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
> +int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
> {
> u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
> u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
> @@ -465,25 +459,6 @@ static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable)
> return err;
> }
>
> -static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> -{
> - struct st_lsm6dsx_hw *hw = private;
> -
> - return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> -}
> -
> -static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> -{
> - struct st_lsm6dsx_hw *hw = private;
> - int count;
> -
> - mutex_lock(&hw->fifo_lock);
> - count = st_lsm6dsx_read_fifo(hw);
> - mutex_unlock(&hw->fifo_lock);
> -
> - return !count ? IRQ_NONE : IRQ_HANDLED;
> -}
> -
> static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
> {
> return st_lsm6dsx_update_fifo(iio_dev, true);
> @@ -501,59 +476,8 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
>
> int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
> {
> - struct device_node *np = hw->dev->of_node;
> - struct st_sensors_platform_data *pdata;
> struct iio_buffer *buffer;
> - unsigned long irq_type;
> - bool irq_active_low;
> - int i, err;
> -
> - irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> -
> - switch (irq_type) {
> - case IRQF_TRIGGER_HIGH:
> - case IRQF_TRIGGER_RISING:
> - irq_active_low = false;
> - break;
> - case IRQF_TRIGGER_LOW:
> - case IRQF_TRIGGER_FALLING:
> - irq_active_low = true;
> - break;
> - default:
> - dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> - return -EINVAL;
> - }
> -
> - err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> - ST_LSM6DSX_REG_HLACTIVE_MASK,
> - FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> - irq_active_low));
> - if (err < 0)
> - return err;
> -
> - pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> - if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> - (pdata && pdata->open_drain)) {
> - err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> - ST_LSM6DSX_REG_PP_OD_MASK,
> - FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> - 1));
> - if (err < 0)
> - return err;
> -
> - irq_type |= IRQF_SHARED;
> - }
> -
> - err = devm_request_threaded_irq(hw->dev, hw->irq,
> - st_lsm6dsx_handler_irq,
> - st_lsm6dsx_handler_thread,
> - irq_type | IRQF_ONESHOT,
> - "lsm6dsx", hw);
> - if (err) {
> - dev_err(hw->dev, "failed to request trigger irq %d\n",
> - hw->irq);
> - return err;
> - }
> + int i;
>
> for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
> buffer = devm_iio_kfifo_allocate(hw->dev);
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index aebbe0ddd8d8..b5d3fa354de7 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -36,6 +36,8 @@
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> #include <linux/pm.h>
> #include <linux/regmap.h>
> #include <linux/bitfield.h>
> @@ -55,6 +57,11 @@
> #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
> #define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
>
> +#define ST_LSM6DSX_REG_HLACTIVE_ADDR 0x12
> +#define ST_LSM6DSX_REG_HLACTIVE_MASK BIT(5)
> +#define ST_LSM6DSX_REG_PP_OD_ADDR 0x12
> +#define ST_LSM6DSX_REG_PP_OD_MASK BIT(4)
> +
> #define ST_LSM6DSX_REG_ACC_ODR_ADDR 0x10
> #define ST_LSM6DSX_REG_ACC_ODR_MASK GENMASK(7, 4)
> #define ST_LSM6DSX_REG_ACC_FS_ADDR 0x10
> @@ -804,6 +811,83 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
> return iio_dev;
> }
>
> +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
> +{
> + struct st_lsm6dsx_hw *hw = private;
> +
> + return hw->sip > 0 ? IRQ_WAKE_THREAD : IRQ_NONE;
> +}
> +
> +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
> +{
> + struct st_lsm6dsx_hw *hw = private;
> + int count;
> +
> + mutex_lock(&hw->fifo_lock);
> + count = st_lsm6dsx_read_fifo(hw);
> + mutex_unlock(&hw->fifo_lock);
> +
> + return !count ? IRQ_NONE : IRQ_HANDLED;
> +}
> +
> +int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
> +{
> + struct st_sensors_platform_data *pdata;
> + struct device_node *np = hw->dev->of_node;
> + unsigned long irq_type;
> + bool irq_active_low;
> + int err;
> +
> + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
> +
> + switch (irq_type) {
> + case IRQF_TRIGGER_HIGH:
> + case IRQF_TRIGGER_RISING:
> + irq_active_low = false;
> + break;
> + case IRQF_TRIGGER_LOW:
> + case IRQF_TRIGGER_FALLING:
> + irq_active_low = true;
> + break;
> + default:
> + dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
> + return -EINVAL;
> + }
> +
> + err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_HLACTIVE_ADDR,
> + ST_LSM6DSX_REG_HLACTIVE_MASK,
> + FIELD_PREP(ST_LSM6DSX_REG_HLACTIVE_MASK,
> + irq_active_low));
> + if (err < 0)
> + return err;
> +
> + pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
> + if ((np && of_property_read_bool(np, "drive-open-drain")) ||
> + (pdata && pdata->open_drain)) {
> + err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_PP_OD_ADDR,
> + ST_LSM6DSX_REG_PP_OD_MASK,
> + FIELD_PREP(ST_LSM6DSX_REG_PP_OD_MASK,
> + 1));
> + if (err < 0)
> + return err;
> +
> + irq_type |= IRQF_SHARED;
> + }
> +
> + err = devm_request_threaded_irq(hw->dev, hw->irq,
> + st_lsm6dsx_handler_irq,
> + st_lsm6dsx_handler_thread,
> + irq_type | IRQF_ONESHOT,
> + "lsm6dsx", hw);
> + if (err) {
> + dev_err(hw->dev, "failed to request trigger irq %d\n",
> + hw->irq);
> + return err;
> + }
> +
> + return err;
> +}
> +
> int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
> struct regmap *regmap)
> {
> @@ -842,6 +926,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
> return err;
>
> if (hw->irq > 0) {
> + err = st_lsm6dsx_irq_setup(hw);
> + if (err < 0)
> + return err;
> err = st_lsm6dsx_fifo_setup(hw);
> if (err < 0)
> return err;
> --
> 2.22.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2019-06-18 15:57 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-18 12:59 [PATCH 0/5] iio: imu: st_lsm6dsx: add event reporting and wakeup Sean Nyekjaer
2019-06-18 12:59 ` [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core Sean Nyekjaer
2019-06-18 15:57 ` Lorenzo Bianconi [this message]
2019-06-18 16:56 ` Sean Nyekjær
2019-06-19 5:58 ` Lorenzo Bianconi
2019-06-19 6:01 ` Sean Nyekjaer
2019-06-18 12:59 ` [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events Sean Nyekjaer
2019-06-18 15:49 ` Lorenzo Bianconi
2019-06-18 19:14 ` Sean Nyekjaer
2019-06-18 20:21 ` Lorenzo Bianconi
2019-06-19 6:30 ` Sean Nyekjaer
2019-06-18 12:59 ` [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option Sean Nyekjaer
2019-06-18 15:51 ` Lorenzo Bianconi
2019-06-18 19:19 ` Sean Nyekjaer
2019-06-18 20:27 ` Lorenzo Bianconi
2019-07-01 11:06 ` Sean Nyekjaer
2019-06-18 12:59 ` [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread Sean Nyekjaer
2019-06-18 15:55 ` Lorenzo Bianconi
2019-06-18 19:31 ` Sean Nyekjaer
2019-06-18 20:24 ` Lorenzo Bianconi
2019-06-22 9:55 ` Jonathan Cameron
2019-06-22 12:23 ` Lorenzo Bianconi
2019-06-18 12:59 ` [PATCH 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt Sean Nyekjaer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190618155705.GA22268@localhost.localdomain \
--to=lorenzo@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi83@gmail.com \
--cc=martin@geanix.com \
--cc=sean@geanix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).