[PATCH AUTOSEL 4.19 09/60] staging:iio:ad7150: fix threshold mode config bit

[PATCH AUTOSEL 4.19 09/60] staging:iio:ad7150: fix threshold mode config bit

[Sasha Levin]

From: Melissa Wen <melissa.srw@gmail.com>

[ Upstream commit df4d737ee4d7205aaa6275158aeebff87fd14488 ]

According to the AD7150 configuration register description, bit 7 assumes
value 1 when the threshold mode is fixed and 0 when it is adaptive,
however, the operation that identifies this mode was considering the
opposite values.

This patch renames the boolean variable to describe it correctly and
properly replaces it in the places where it is used.

Fixes: 531efd6aa0991 ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.")
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/cdc/ad7150.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index d16084d7068c..a354ce6b2b7b 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -6,6 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/bitfield.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -130,7 +131,7 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 {
 	int ret;
 	u8 threshtype;
-	bool adaptive;
+	bool thrfixed;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 
 	ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG);
@@ -138,21 +139,23 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 		return ret;
 
 	threshtype = (ret >> 5) & 0x03;
-	adaptive = !!(ret & 0x80);
+
+	/*check if threshold mode is fixed or adaptive*/
+	thrfixed = FIELD_GET(AD7150_CFG_FIX, ret);
 
 	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
 		if (dir == IIO_EV_DIR_RISING)
-			return adaptive && (threshtype == 0x1);
-		return adaptive && (threshtype == 0x0);
+			return !thrfixed && (threshtype == 0x1);
+		return !thrfixed && (threshtype == 0x0);
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
 		if (dir == IIO_EV_DIR_RISING)
-			return adaptive && (threshtype == 0x3);
-		return adaptive && (threshtype == 0x2);
+			return !thrfixed && (threshtype == 0x3);
+		return !thrfixed && (threshtype == 0x2);
 	case IIO_EV_TYPE_THRESH:
 		if (dir == IIO_EV_DIR_RISING)
-			return !adaptive && (threshtype == 0x1);
-		return !adaptive && (threshtype == 0x0);
+			return thrfixed && (threshtype == 0x1);
+		return thrfixed && (threshtype == 0x0);
 	default:
 		break;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/60] iio: temperature: mlx90632 Relax the compatibility check

[Sasha Levin]

From: Crt Mori <cmo@melexis.com>

[ Upstream commit 389fc70b60f534d679aea9a3f05146040ce20d77 ]

Register EE_VERSION contains mixture of calibration information and DSP
version. So far, because calibrations were definite, the driver
compatibility depended on whole contents, but in the newer production
process the calibration part changes. Because of that, value in EE_VERSION
will be changed and to avoid that calibration value is same as DSP version
the MSB in calibration part was fixed to 1.
That means existing calibrations (medical and consumer) will now have
hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility
should be based only on DSP version part of the EE_VERSION (bits 0 to 7)
register.

Signed-off-by: Crt Mori <cmo@melexis.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/temperature/mlx90632.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index 9851311aa3fd..ebff17f194b2 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -81,6 +81,8 @@
 /* Magic constants */
 #define MLX90632_ID_MEDICAL	0x0105 /* EEPROM DSPv5 Medical device id */
 #define MLX90632_ID_CONSUMER	0x0205 /* EEPROM DSPv5 Consumer device id */
+#define MLX90632_DSP_VERSION	5 /* DSP version */
+#define MLX90632_DSP_MASK	GENMASK(7, 0) /* DSP version in EE_VERSION */
 #define MLX90632_RESET_CMD	0x0006 /* Reset sensor (address or global) */
 #define MLX90632_REF_12		12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
 #define MLX90632_REF_3		12LL /**< ResCtrlRef value of Channel 3 */
@@ -666,10 +668,13 @@ static int mlx90632_probe(struct i2c_client *client,
 	} else if (read == MLX90632_ID_CONSUMER) {
 		dev_dbg(&client->dev,
 			"Detected Consumer EEPROM calibration %x\n", read);
+	} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
+		dev_dbg(&client->dev,
+			"Detected Unknown EEPROM calibration %x\n", read);	
 	} else {
 		dev_err(&client->dev,
-			"EEPROM version mismatch %x (expected %x or %x)\n",
-			read, MLX90632_ID_CONSUMER, MLX90632_ID_MEDICAL);
+			"Wrong DSP version %x (expected %x)\n",
+			read, MLX90632_DSP_VERSION);
 		return -EPROTONOSUPPORT;
 	}
 
-- 
2.20.1